Supply and Delivery as well as design Engineering Installation Commissioning and demonstration of CCTV for Surveillance Projects at BTPS with one year service support

Amount

Scope of supply

PTZ DOME CAMERA WITH MOUNTING ACC. Additional Data: Minimum desired specificification :- Imaging Sensor : CMOS; 1/2.8 or higher with Full HD Resolution ONVIF : Yes fully compliant(Mandatory) Resolution : 2 MP (1920 x 1080) Focus Mode : Autofocus mode Frame Rate : 30 FPS Minimum Illumination : Color 0.1 LUX (1/30Sec, F1.4) B/W 0LUX (IR LED on) or better Lens Aperture : F1.6 - F4.3 and better range Shutter Speed : 1/1 to 1/30,000s Scanning System : Progressive Focal Length and Zoom : Remote Motorized Varifocal 4 - 92 mm (23X Optical or better zoom) Lens ( or higher range) IR Viewable Length : 100 Mtrs or higher Day & Night : Auto (True Infrared Cut Filter) / Color / B/W Backlight Compensation : Yes Wide Dynamic Range : 120dB True WDR Motion Detection : Yes Privacy Masking : Yes Auto Tracking : Yes, Inbuilt Tracking Flip/Mirror : Flip (0 Deg/180 Deg) / Mirror Preset Feature : Continuos tour, Preset pattern, Tour according to the pattern. Video Compression : H.264, H.265;Security : Login Authentication, IP Address Filtering, User access Log Ethernet : 10/100 MBPS i.e. 100MBPS RJ-45 Storage : Inbuilt SD-Card Slot Storage and onboard support of upto 128Gb memory card to record the video locally in case of network failure and to copy the data to the NVR after network re-establishment. Resistance : IK10 Protection : IP66 Material : Vandal Proof Metal Housing Operating Temperature : 0°C ~ +60°C Input Voltage/Current : Dual Option - PoE Power & Alternative AC Input power from nearest Raw AC Power [Raw Single Phase] with AC-DC adapter(included) or direct connection to raw power.

BULLET CAMERA, IP, IR, VARIFOCAL Additional Data: Minimum desired specification :- Imaging Sensor : CMOS; 1/2.8 or higher with Full HD Resolution Resolution : 2 MP (1920 x 1080) Focus Mode : Autofocus mode Frame Rate : 30 FPS Minimum Illumination : Color 0.1 LUX (1/30Sec, F1.4) B/W 0LUX (IR LED on) or better Lens Aperture : F1.6 - F4.3 and better range Shutter Speed : 1/1 to 1/30,000s Scanning System : Progressive Focal Length and Zoom : Remote Motorized Varifocal 2.8~12 mm (4X Optical or better) Lens ( or higher range) IR Viewable Length : 30 Mtrs or higher Day & Night : Auto (True Infrared Cut Filter) / Color / B/W Backlight Compensation : Yes Wide Dynamic Range : 120dB True WDR Motion Detection : Yes Privacy Masking : Yes Flip/Mirror : Flip (0 Deg/180 Deg) / Mirror Video Compression : H.264, H.265; Security : Login Authentication, IP Address Filtering, User access Log ONVIF Protocol : Yes fully compliant(mandatory) Ethernet : 10/100 MBPS i.e. 100MBPS RJ-45 Storage : Inbuilt SD-Card Slot Storage and onboard support of upto 128Gb memory card to record the video locally in case of network failure and to copy the data to the NVR after network re-establishment. Resistance : IK10 Protection : IP66 Material : Vandal Proof Metal Housing Operating Temperature : 0°C ~ +60°C Input Voltage/Current : Dual Option - PoE Power & Alternative AC Input power from nearest Raw AC Power [Raw Single Phase] with AC-DC adapter (included).

DOME CAMERA, IP, IR, VARIFOCAL Additional Data: Minimum desired specification :- Imaging Sensor : CMOS; 1/2.8 or higher with Full HD Resolution Resolution : 2 MP (1920 x 1080) Focus Mode : Autofocus mode Frame Rate : 30 FPS Minimum Illumination : Color 0.1 LUX (1/30Sec, F1.4) B/W 0LUX (IR LED on) or better Lens Aperture : F1.6 - F4.3 and better range Shutter Speed : 1/1 to 1/30,000s Scanning System : Progressive Focal Length and Zoom : Remote Motorized Varifocal 2.8~12 mm (4X Optical or better) Lens ( or higher range) IR Viewable Length : 30 Mtrs or higher Day & Night : Auto (True Infrared Cut Filter) / Color / B/W Backlight Compensation : Yes Wide Dynamic Range : 120dB True WDR Motion Detection : Yes Privacy Masking : Yes Flip/Mirror : Flip (0 Deg/180 Deg) / Mirror Video Compression : H.264, H.265; Security : Login Authentication, IP Address Filtering, User access Log ONVIF Protocol : Yes fully compliant(mandatory) Ethernet : 10/100 MBPS i.e. 100MBPS RJ-45 Storage : Inbuilt SD-Card Slot Storage and onboard support of upto 128Gb memory card to record the video locally in case of network failure and to copy the data to the NVR after network re-establishment. Resistance : IK10 Protection : IP66 Material : Vandal Proof Metal Housing Operating Temperature : 0°C ~ +60°C Input Voltage/Current : Dual Option - PoE Power & Alternative AC Input power from nearest Raw AC Power [Raw Single Phase] AC-DC adapter(included)

NVR, 64 CHANNEL WITH RAID, 16 HDD SLOT Additional Data: Minimum desired specification :-Operating system/ VMS : Linux (Pre-installed) / Embedded ONVIF : Support fully compliant required mandatory IP video input : 64-channel IP Video input Two-way audio : should support Incoming bandwidth : 300 Mbps or higher ######## Outgoing bandwidth : 200 Mbps or higher ########## Display Interface : 2 x HDMI : 3840×2160 (4K Resolution), 1920×1080p Full HD resolution, 1024×768; VGA-1 1920×1080p Full HD resolution, 1024×768 Audio output : 3.5mm Stereo Audio Jack Split-Screen display : it should support multi split-screen live view on connected monitor. Recording resolution : 12MP / 8 MP/ 6MP / 5MP / 4MP /3MP/ 1080p / 720p / 4CIF / CIF Decoding format : it should support H.265, H.264; Synchronous playback : 16-channel Smart Search option : Required SATA interface for HDD : 16 x SATA surveillance HDD interfaces required for 16-HDDs (Hot Swappable HDD with RAID-0, RAID-1, RAID-5) HDD capacity : Up to 10TB capacity expandable for each HDD Slot Network interface : 2 x RJ-45 10/100/1000 Mbps self-adaptive Ethernet interfaces (GBPS Port each) USB interface : at least 1 × USB 2.0; atleast 1 x USB 3.0; Serial interface : RS-485; Alarm in/out : at least 8 input / 4 output Power supply : 100 to 240 VAC Working temperature : 0°C to +55°C (32 to 131°F) Remarks : 1)# Email alert generation on CCTV non-detection;HDD failure; Recording failure; Video loss, Camera event (Sensor, MD, Video analytics), Easy interface to set the email for the events : 2)# User creation with various permission assignments for different users. Multiple users can be created without any limitations. : 3) Calendar / Event / Bookmark / Smart Search support required Playback : Fast/Slow Forward/Backward, Move one step up/down; Normal, Schedule (Continuous / Event), Event (Pre / Post), Event profile Event Trigger : E-mail, PTZ preset, Alarm out, Buzzer, Monitor out Camera Setup : Auto/ Manual; Automatic device IP scan, Profile edit, Resolution, Fisheye dewarping, Hallway/ Corridor view, Brightness / Contrast, Device setup page, Exporting / Importing devices settings, Device firmware update (firmware download must be free from the manufacturer site with free or no login. The firmware details must be detailed in the site ) Date & Time Sync : NTP server PTZ Features : Control Device Via GUI, Controller, Preset, Preset Tour (continuous) Protocol Support : TCP/IP, UDP/IP, RTP (UDP), RTP (TCP), RTSP, NTP, HTTP, DHCP (Server,Client), PPPoE, SMTP,ICMP, IGMP, ARP, DNS, DDNS, uPnP, HTTPS, SNMP,ONVIF, API (Server, Client) DDNS : Support required IPv4 : Support required Security : IP address filtering, User access log, 802.1xauthentication, Encryption Language : English Viewer Software : Web Viewer and application software shall be provided. The application software must be able to add any ONVIF camera with;full features for access Licenses : All the licenses of every operation of the NVR must be for lifetime and there will be no need to buy any license in future for any operation of the NVR.

HDD, SURVEILLANCE 8 TB HDD, ENTERPRISE Additional Data: Minimum desired specification :- 8TB, 3.5-inch enterprise category SATA drive; SATA 6Gb/s interfaces in industry-standard advanced formats for easy integration into replicated and RAID multi-drive storage servers and systems; 24×7 workloads of 550TB/yr#10× that of desktop drives with 7200 RPM; On-demand Power Balance feature available for lower ; power/performance in random read/write environments ; Robust performance with dual processors, ramp load technology,; top-cover attached motor and humidity sensor for optimum performance in all chassis; Operating Temperature: 5 to 60 degree C;

MONITOR, LFD 49" Additional Data: Minimum desired specification :- Size (diagonally) : 49 "or above Panel Technology : Vertical Alignment or equivalent Type : OLED / QLED Resolution : 3840x2160 Aspect ratio : 16:09 Native contrast ratio : Minimum 4000:1 Brightness : 500 nits or more Response time : 8 ms(Typ) or less Operation Hour : 24Hrx7 Haze : Minimum 25% or better RJ-45 Port 10/100/1000 mbps (GBPS Port) : 1 Nos or more USB2.0 & USB 3.0 : 2 Nos + 2Nos or more Video Input : HDMI (2 or more) Audio in : Stereo mini Jack , HDMI Audio out : Stereo mini Jack , HDMI Operating temperature : 0 C ~ 40 C Wifi and Bluetooth : Yes Dust Protection : IP5x (atleast) Control : Remote Controlled and Buttons Built in speaker : 10W atleast Operating System : Android Remarks : H/W:- Temperature Sensor, Pivot Display, Clock Battery (168hrs Clock Keeping); Source Switching & Recovery, LFD Home UI, Button Lock, Hot key option, Plug & Play (Easily configurable Initial Setting); Able to install almost all high-end apps or players from the Android Play store.

CLIENT WORKSTATION Additional Data: Minimum desired specification :- Processor : Intel Core i7 latest generation Chipset : Intel with option for m2 slot for NVMe SSD RAM : 16 GB NECC, DDR4, Total 8 DIMM Slots BIOS : BIOS of the Workstation to have tool for Enhanced security features like self-healing, regular checks. Drive Controllers : Onboard 6-Channel SATA @ 6Gbps (RAID 0,1,5,10) Hard Disk : 1 TB NVMe SSD Option for future expansion of additional up to SATA SSD Hard drives. Optical Drive : 9.5mm Slim Super Multi DVD Writer Graphics Card : AMD Radeon Pro WX 7100 8GB (4) DP GFX Bays : 2 x External 5.25##; 2 x Internal 3.5##; Slim Optical Drive bay Slots : 2x M.2 PCIe x4 Gen3 Slot for SSDs; 2 x PCIe x16 Gen3 1 x PCIe x8 Gen3 2 x PCIe x4 Gen3 All PCI Express slots should be open-ended. Security : BIOS controlled electro-mechanical internal chassis lock for the system. Ports : Front: 4 USB 3.1, 1 Headphone, 1 Microphone Rear: 6 USB 3.1, 2x RJ-45 integrated Gigabit LAN, 1 Audio Line-In, 1 Audio Line-Out, 1 Microphone Keyboard and Mouse : Minimum 104 keys USB Keyboard and USB Optical Scroll mouse - Same make as that of the workstation Audio : High Definition Integrated Audio with Internal speaker. Power Supply : 180-240V AC supply Chassis : Tool less chassis with easy access. Provision for Kensington lock and Panel lock required. Integrated handles on the chassis. System should be rack-mountable Operating System : Windows 10 Professional for Workstations. Additional Software : MS Office Home and Business 2016 Vendor Status : The hardware vendor should be a reputed concern, having global presence in multiple countries. Vendor should have ISO certifications. Accessories : 10-meter HDMI Cable Dust Filter : Serviceable Dust Filter for small form factor Port Cover : Unused Open Ports Cover (USB, HDMI, etc)

8 PORT GIGABIT SMART MANAGED POE SWITCH # Additional Data:Minimum desired specification :-Layer 2 Gigabit Ethernet Industrial Managed switch with 8x 10/100/1000BaseT (GBPS) PoE / PoE+ Ports & 2x combo 10/100/1000BaseT (GBPS)ports/SFP slots; Switching capacity: 20Gbps; PoE & PoE+, HiPoE(Optional)-(As per requirement) support with PoE power budget of 150 Watt or better; At least one power supply should be included with the switch from day one; The switch will have Web console, telnet to manage the switch like enabling/disabling the ports remotely, configuring every features remotely, restarting etc. The boot time of the switch must be minimum. Also we will be able to find the port in which the IP device is connected from remote management. SNMP feature enabled from Day1. The switch should have 4K or more MAC address table size; The switch should support 802.1q VLAN, GARP The switch should support following L2 features from day one: STP, RSTP, MSTP, 802.3x Flow control, One-to-one & Many-to-one mirroring, Jumbo frame support upto 9216bytes, 802.3ad & 802.1AX Link Aggregation, IGMP snooping v1, v2 & v3, MLD Snooping v1 & v2 The switch should support following L3 features from day one: IPv4 & IPv6 static routing, IPv6 Neighbor Discovery (ND), at least 256 static ARP -(optional). The switch should have following Access control list features from day one: Access control list based on switch port, DSCP, IP address, MAC address, 802.1p priority, VLAN ID The switch should have following Security features from day one: 802.1x RADIUS authentication, Dynamic ARP Inspection, port security, IP source guard, DHCP server screening, DoS Attack Prevention. The switch should have following QoS features from day one: 802.1p based priority, at least 4 queues per port, strict priority & WRR, bandwidth control with minimum granularity of 64Kbps The switch should have following management features from day one: Physical console port, Web GUI, Telnet, SSL, SSH, SNMPv1v2v3, RMON, LLDP, LLDP-MED, sFlow, Syslog, NTP, BootP/DHCP Client The switch should be DIN-Rail mountable. NEMA-TS2 Compliant. Operating temperature: 0°C to 60°C Enclosure should be IP30 rated & metal housing Remarks : Capable of connecting all the types of CCTV procured along with this project and also our existing Bosch make (bullet & PTZ) and Hikvision make (Fixed bullet and dome) IP IR cameras installed in our campus in a managed setup on all the ports.

CONVERTER,MEDIA CONVERTER Additional Data: Minimum desired specification :- Industrial Grade Giga Ethernet Media Converter; 10/100/1000BASE-TX (RJ45) to 1000BASE-X SM SC Duplex Connector, Single Mode, Up to 10Kms; Operating Temperature: 0° to 60° C; IP30 Metal Enclosure for harsh Industrial conditions; Dual Redundant DC power inputs; Reverse Polarity Protection; Link Fault Pass Through (LFPT) feature; Mounting: DIN-Rail; At least one power supply should be included; Compatible with any other make Media Converter;

POE INJECTOR, 10/100 MBPS 802.3AF COMPLIANT. Additional Data: Minimum desired specification :- Power Connector Port : One 10/100 Mbps Ethernet Data In Port & One 10/100 Mbps Ethernet Power & Data Out Port Power: Input : AC [Raw Single Phase] & PoE Out: 48V DC up to 30 watts Data Transfer rates: : 100 Mbps Standards: IEEE 802.3 10Base-T Ethernet, IEEE802.3u 100Base-TX Fast Ethernet, IEEE 802.3af /IEEE802.3at Deliver Active PoE/PoE+/HiPoE (As per requirement) power over Gigabit connections for distances of up to 100 m , IEEE802.3ab - LED Indicators: PoE & Power Operating Temperature: 0º C to 40º C Remarks : Capable of connecting all the CCTV procured along with this project

NETWORK RACK , 6U WITH ACCESSORIES Additional Data: Minimum desired specification :- Size : 6U, 19" 550mm Width, 600mm Depth, Wall Mount Indoor Networking Rack Standard : It should confirm to DIN 41494 or equivalent standard Structure : It should be welded construction with steel frame; 19" mounting angle made of formed steel Front Door : Lockable tough ended glass front door Finish : Powdered coated standard finish Opening and Cut-outs : Top & Bottom welded cover with vented & cable entry exit cut outs Rails : 2 pair of 19" mounting rails Cable Manager : 1U Cable Manager Fan : Roof Mounted Fan Unit Illumination : Light with switch on both front and rear. Four small LED light to be installed by the supplier inside the Network Rack. The LED lights will be small and easily available in local market for easy future replacement.This light setup need not to be integrated part for the manufacturer. The supply will install the setup during installation.

NETWORK RACK, OUTDOOR ENCLOSURE, 6U Additional Data: Minimum desired specification :- Size : 6U, 19" 550mm Width, 600mm Depth, IP55 Rated Outdoor Pole Mounted & Wall Mounted Rack Structure : Construction of Material- 1.2/1.5mm Thick CRCA sheet. The side panels are integrated type & welded with canopy & bottom cover Front Door : A very compact design, welded structure with front accessible. Front Door with Filter, Louver & Lock. Self-adhesive thermal foam from inside. Door Hinges - 2 Nos. Opening and Cut-outs : Top & Bottom welded cover with vented & cable entry exit cut outs Rails : 2 pair of 19" mounting rails Cable Manager : 1U Cable Manager Fan : 90CFM, 230V AC Fan - 2 Nos, front door Illumination : Light with switch on both front and rear. Four small LED light to be installed by the supplier inside the Network Rack. The LED lights will be small and easily available in local market for easy future replacement.This light setup need not to be integrated part for the manufacturer. The supply will install the setup during installation.

RACK, 22 U FLOOR MOUNTED Additional Data: Minimum desired specification :- Size : 22U Network Enclosure Steel Frame with 600mm Width x 1000mm Depth Standard : It should confirm to DIN 41494 or equivalent standard Structure : It should be welded construction with steel frame; 19" mounting angle made of formed steel Front Door : Lockable tough ended glass front door Finish : Powdered coated standard finish Opening and Cut-outs : Top & Bottom welded cover with vented & cable entry exit cut outs Rails : 2 pair of 19" mounting rails Cable Manager : 1U Cable Manager Fan : Roof Mounted Fan Unit Illumination : Light with switch on both front and rear. Four small LED light to be installed by the supplier inside the Network Rack. The LED lights will be small and easily available in local market for easy future replacement. This light setup need not to be integrated part for the manufacturer. The supply will install the setup during installation. Other Features : Castor wheels (Front 2 wheels with Brakes and rear without brakes); PDU included.

Spike Buster, 6 outlet NA Additional Data: Minimum desired specification :- 6 nos of 5/15 Amps adjustable/adaptable socket with switches for each socket with surge guard (19" standard Rack mountable) to be installed in the procured rack; Indicator for Power; 3m 3 core 2.5sqmm power cable with plug with proper earthing provision;

LIU, RACK MOUNT, 24 PORT Additional Data: Minimum desired specification :- 24-Port, 19" Rack Mount LIU Fully Loaded with Single Mode SC Adapters & Single Mode SC Pigtails (1Mtr) Aluminium/Steel base material with powder coating for light Mounting Snap-in locker design, easy to change the adapter panels Front mounted cable saddles for jumper management It should have facility for managing splices & terminations It should have rubber fiber slotted bracket built-in It should be capable of storing upto 3mtr of 900micron tight buffered fiber per adapter It should have removable rubber grommet allowing for pre-terminated fibre trunk installation, cable protection & minimizing dust build-up. It should have at least 4 rubber cable plugs for cable entries. It should have removable front & top covers for better access to interior of LIU It should be supplied with cable ties, mounting ear screws and spiral wrap tubes Pigtail Specification Single Mode SC Pigtail - 1Mtr Provide a field installable Single mode SC pigtail Utilize a UPC polishing on the tip to provide high yield during installation. Meet TIA/EIA 568.C.3 standards for repeatability. Insertion Loss (Max): <0.3 db Max. Mating Cycle : 1000 Times Return Loss : >/= 50 db for UPC Connector ferrule: Ceramic Operating Temp.: (0 deg. C to + 60 deg. C) Buffer diameter: 900um Tight buffer Types : SC Type Simplex

LIU BOX Additional Data: Minimum desired specification :- 12-Port, 19" Rack Mount LIU Fully Loaded with Single Mode SC Adapters & Single Mode SC Pigtails (1Mtr) Aluminium/Steel base material with powder coating for light mounting Snap-in locker design, easy to change the adapter panels Front mounted cable saddles for jumper management It should have facility for managing splices & terminations It should have rubber fiber slotted bracket built-in It should be capable of storing upto 3mtr of 900micron tight buffered fiber per adapter It should have snap-in locker design for easy to change adapter panels for various connector patching It should have removable rubber grommet allowing forpre-terminated fibre trunk installation, cable protection & minimizing dust build-up. It should have at least 4 rubber cable plugs for cable entries. It should have removable front & top covers for better access to interior of LIU It should be supplied with cable ties, mounting ear screws and spiral wrap tubes Pigtail Specification Single Mode SC Pigtail - 1Mtr Provide a field installable Single mode SC pigtail Utilize a UPC polishing on the tip to provide high yield during installation. Meet TIA/EIA 568.C.3 standards for repeatability. Insertion Loss (Max): <0.3 db Max. Mating Cycle : 1000 Times Return Loss : >/= 50 db for UPC Connector ferrule: Ceramic Operating Temp.: (0 deg. C to + 60 deg. C) Buffer diameter: 900um Tight buffer Types : SC Type Simplex

LIU, 6 PORT, FULLY LOADED, RACK MOUNTED WITH SC ADAPTER, SC SM PIGTAILS Additional Data: Minimum desired specification :- 6-Port, 19" Rack Mount LIU Fully Loaded with Single Mode SC Adapters & Single Mode SC Pigtails (1Mtr) Aluminum/Steel base material with powder coating for light mounting Snap-in locker design, easy to change the adapter panels Front mounted cable saddles for jumper management It should have facility for managing splices & terminations It should have rubber fiber slotted bracket built-in It should be capable of storing upto 3mtr of 900micron tight buffered fiber per adapter It should have snap-in locker design for easy to change adapter panels for various connector patching It should have removable rubber grommet allowing for pre-terminated fibre trunk installation, cable protection & minimizing dust build-up. It should have at least 4 rubber cable plugs for cable entries. It should have removable front & top covers for better access to interior of LIU It should be supplied with cable ties, mounting ear screws and spiral wrap tubes Pigtail Specification Single Mode SC Pigtail - 1Mtr Provide a field installable Single mode SC pigtail Utilize a UPC polishing on the tip to provide high yield during installation. Meet TIA/EIA 568.C.3 standards for repeatability. Insertion Loss (Max): <0.3 db Max. Mating Cycle : 1000 Times Return Loss : >/= 50 db for UPC Connector ferrule: Ceramic Operating Temp.: (0 deg. C to + 60 deg. C) Buffer diameter: 900um Tight buffer Types : SC Type Simplex

OFC PACH CORD, SC-SC , LENGTH 3 MTR Additional Data: Minimum desired specification :- Single Mode SC-SC Duplex Patch Cord - 3Mtr; Optical fibre patch leads shall comprise of Single mode 9/125μm fibre with SC-SC fibre connectors terminated at each end. The optical fibre patch leads shall comply with the following specifications: Optical Fibre # Single mode; Connector: Zirconia ceramic ferrule; Pre-radiuses and pre-polished ferrule; Duplex Type; Color-coded yellow for Single mode; Insertion Loss: <0.3 db; Cable: 9/125, SM; Return Loss: >/= 50dB for UPC; Durability: 1000 mating cycle; Working Temp: (0 deg. C to + 60 deg. C); Length: 3 Meter;

OPTICAL FIBRE CABLE,6 CORE # Additional Data: Minimum desired specification :- 6 Core Single Mode Outdoor Armored Fiber Optic Cable Electro Chromium Coated Corrugated Steel Tape (ECCS) Central loose tube with jelly compound Sequential meter marking Armoured Design with Steel music Wire ITU-T Recommendation G.652 Outer Diameter: 7.2±0.5mm Thickness of HDPE Jacket: 1.8±0.2mm Pulling Tension: Short Term (1000N) Crush Load: 2000N/100mm Bend Radius: Short Term (20D) The fibre type is a Matched Cladding Single Mode fibre dual coated with acrylate coating. The fibre is optimized for operation at 1310 nm and at 1550 nm. Nominal Mode Field Diameter: 9.2 μm Cladding Diameter: 125 μm Clading non-circularity: < 2% Core: Germanium doped core with no phosphorous Coating: UV curable dual layer acrylate coating to ensure excellent micro-bending and abrasion resistance PMD (ps/km): 0.2 Cable Cut-off Wavelength: 1260nm Attenuation (of cable with fibers): At 1310 nm: <= 0.38 dB/km At 1550 nm : <= 0.25 dB/km All fibre Optic Cable & components should be from same make

STP , CAT 6, CABLE Additional Data: Cat6 SFTP Cable 23 AWG Solid Bare Copper Wire SFTP Cable TIA/EIA-568.C.2 Standard FR-PVC Sheath Separator / Cross Filler Conductor Resistance: # 9.38 #/100m or better Mutual Capacitance: < 5.6nF/100m or better Delay Skew: <45ns/100m or better Operating Temperature: 0°C ~ 70°C or higher Flame Properties: IEC 60332-1 - Flammability Test Insulation: High Density Polyethylene Shield: Aluminium/Polyester Foil with Tinned copper Braiding

CAT 6, STP , PATCH CORD 1 MTR IN LENGTH Additional Data: Minimum desired specification :- Category 6 STP Factory Crimped Patch Cord # 1Mtr The work area equipment cords shall, at a minimum comply with proposed ANSI/TIA/EIA-568-C.2 Commercial Building Cabling Standards Transmission Performance Specifications for 4 pair Category 6 Cabling. Mechanical Feature of Cable: Conductor size: 26 AWG stranded bare copper Jacket: FR-PVC Insulation Material: HDPE Outside Tap Material: Aluminium Foil 26AWG Drain Wire Contact blade: Copper Alloy

CONNECTOR, RJ45 Additional Data: Minimum desired specification :- Connector type: RJ45 type with shielding Capable of STP CAT6 cable connection

HDPE PIPE Additional Data: Minimum desired specification :- HDPE (High Density Polyethylene) telecom ducts for use as Optical Fiber Cable ducts; Outer diameter: 32 mm +/- .3 mm; Wall Thickness: 2.4 mm +/- .3 mm; Inner layer - smooth surface to enable easy passage of OFC;

PVC CASING/ CAPPING/ CONDUIT Additional Data: Minimum desired specification :- Materials: Poly Vinyl Chloride (PVC) Type: Casing/ Conduit /Flexible conduit / Box Channel /Etc.# As per site requirement Size: As per site requirement ISI Marked

MS POLE LENGTH 5 METER Additional Data: Minimum desired specification :- Should be minimum 5 Mtr length; Dimension: 3.5##of 3 Mtr, 03## of 1 Mtr and 3" of 1 Mtr; MS pole should be with baseplate & equipped with required accessories; Minimum weight: 55 KG; ISI Marked;

MS POLE LENGTH 8 METER Additional Data: Minimum desired specification :- Should be minimum 8 Mtr length; Dimension: 4.5##of 5 Mtr, 3.5## of 1.5 Mtr and 3" of 1.5 Mtr; MS pole should be with baseplate & equipped with required accessories; Minimum weight: 70 KG; ISI Marked;

MS POLE LENGTH 11 METER Additional Data: Minimum desired specification :- Should be minimum 11 Mtr length; Dimension: 4.5" of 6 Mtr, 3.5" of 3 Mtr and 3" of 2 Mtr; MS pole should be with baseplate & equipped with required accessories; Minimum weight: 85 KG; ISI Marked;

POWER SOCKET, 5 AMPS Additional Data: 5/15amps socket along with switches for each socket; Power Rating: 5/15 AMP, 230 V; Should be equipped with suitable PVC Back Box;

POWER CABLE, 3 CORE, 2.5 SQMM Additional Data: Type: 03 Core, 2.5 sq. mm Conductor Material & Type: Copper, Multi strand Insulation compound: PVC

MCB, 2 POLE, 10 AMPS, AC Additional Data: Miniature Circuit Breaker should be of min 10 Amp or better; Should provide protection against overload & short circuit for high inrush current loads; Pole: Double Pole;

BOX, 4" X 4" IP66 FOR CCTV Additional Data: IP Rating: IP66 or better; Material: Poly Vinyl Chloride; Size: 4-inch x 4 inch; Wall Mount;

POWER BOX, PVC Additional Data: Material: Poly Vinyl Chloride/Metal; Size: 10-inch x 4 inch or better; Wall Mount;

scope of work

Site survey, Engineering, Design and submission of Drawing.

Laying of Optic Fibre Cable through underground by soil cutting : - 4000m (approx.) Outdoor soil cutting, digging and armored Cable laying through HDPE Pipe on underground routes, excavating trenches of A type with dimensions of trench as top with 30 cm, bottom width 25 cm and depth up to 60 cm including back filing, compacting (after laying the cables) and removing excess earth from the site. Proper route marker should be laid along the path. N.B. Payment will be done on pro-rata basis

Laying of Optic Fibre Cable through Tray Tray/Saddling : - 4000m (approx.) Laying of armored Cable through existing cable tray, cable trench on brick wall for saddling purpose through HDPE pipe (clamping required).Proper route marker should be laid along the path. N.B. Payment will be done on pro-rata basis

Laying of Optic Fibre Cable through underground via road crossing: - 100m Cable underground road crossing with HDPE Pipe protection 60 cm depth. N.B. Payment will be done on pro-rata basis

Installation & commissioning and demonstration: Erection & commissioning of CCTV, NVR, Work station, LFD, Network switches, racks, media converter etc. along with laying of UTP and all other accessories and also configuration and installation of NMS for successful completion of the total system and Submission of as built drawing. N.B. Network management software (NMS) must be supplied for monitoring all Type of Network Active Components, generation of a live diagram of the connected devices, switches etc. The diagram will be able to display any disconnection in the network and generate an alert. Email alert (optional).

One year comprehensive AMC [After handover of the system. ]

Progility Technologies Pvt Ltd

HexaTech eSecurity Solutions Pvt Ltd

Score Information technologies limited

Sonal Enterprises Pvt Ltd

SURAJ INFORMATICS PVT LTD