Establishment of Chemistry Lab in C-1 and C-2 Class room at Govt. College, Daman. (2nd Call) (E-30042).

Amount

Civil work

Providing and supplying of TEACHER TABLE of Size :-1800mm L x 750mm D x 750mm H consisting of following items. i) Table Top:- 18to20mm Thick Black Granite (15 Sqft) Size :-1800mmL x 750mmD+18mm ii)Under Bench Storage Unit:- (1 No.) a)Three Drawers Unit (1 No.) b)One Shutter Sink Covering Unit (Internal PP Lining) (1 No.) Size:-500mm L x570mm D x 720mm H iii) Sink :- P.P.Sink 300mm L x 300mm W & black P.P. anti-siphon bottle trap (1 No.) iv) Water Tap :- 1 way Water Tap Brass with Powder Coated (1 No.) v)Electric Trunking Size:-300mmL x100mm D x 100mm H (1 No.) Fitted of 6/16 Amp Switch Sockets North-West Make (2 Nos.) Fitted of 6/16 RJ45 Cat6 North-West Make (1 No.) vi)Leg Space/Cross Brace/Foot Rest/Key Board Drawer/Cable Manager/Back Panel (1 No.) vii) Utillity :- Water Line/Draing Line/Gas Line as directed by Engineer in charge.

Providing and supplying of LAB ASSISTANE TABLE of Size :-1200mm L x 750mm D x 750mm H Consisting of following items i) Table Top:- 18to20mm Thick Black Granite (10 Sqft) Size :-1200mmL x 750mmD+18mm ii)Under Bench Storage Unit:- a)One Drawer & One Shutter Unit (1 No.) Size:-450mm L x570mm D x 720mm H iii) Vertical Support Frame with Panel (1 No.) vi)Leg Space/Cross Brace/Foot Rest/Key Board Drawer/Cable Manager/Back Panel (1 No.) iv)Electric Trunking Size:-1200mmL x100mm D x 100mm H Fitted of 6/16 Amp Switch Sockets North-West Make (2 Nos.) Fitted of 6/16 RJ45 Cat6 North-West Make (1 No.) as directed by Engineer in charge.

Providing and supplying of WORKING TABLE of Size :-5300mm L x 750mm D x 900mm H Consisting of following items i) Table Top:- 18to20mm Thick Black Granite (44.16 Sqft) Size :-5300mmL x 750mmD+18mm ii)Under Bench Storage Unit:- a)One Drawer/Two Shutters & One Shutter Unit (4 Nos.) b)Two Shutters & One Shutter Unit (3 Nos.) Size:-750mm L x570mm D x 870mm H iii)Electric Trunking Size:-5250mmL x100mm D x 100mm H (1 No.) Fitted of 6/16 Amp Switch Sockets North-West Make (7 Nos.) as directed by Engineer in charge.

Providing and supplying of WORKING TABLE of Size :-5Size :-6650mm L x 750mm D x 900mm H Consisting of following items i) Table Top:- 18to20mm Thick Black Granite (55.42 Sq.ft.) Size :-6650mmL x 750mmD+18mm ii)Under Bench Storage Unit:- a)One Drawer/Two Shutters & One Shutter Unit (5 Nos.) b)Two Shutters & One Shutter Unit (3 Nos.) Size:-750mm L x570mm D x 870mm H c)Two Shutters & One Shutter Unit (1 No.) Size:-600mm L x570mm D x 870mm H iii)Electric Trunking Size:-6600mmL x100mm D x 100mm H (1 No.) Fitted of 6/16 Amp Switch Sockets North-West Make (9 Nos.) as directed by Engineer in charge.

Providing and supplying of ISLAND TABLE of Size :-5450mm L x 1500mm D x 900mm H Consisting of following itemes i) Table Top:- l8to20mm Thick Black Granite (90.83 Sqft) Size :-5450mmL x 1500mmD+18mm ii)Under Bench Sto rage Unit:- a)One Drawer/Two Shutters & One Shutter Unit (12 Nos.) Size:-600mm L x570mm D x 870mm H b)Two Shutters Sink Covering Unit (Internal PP Lining) (6 Nos.) Size:-600mm L x570mm D x 870mm H iii) Sin k:- P.P.Sink 570mm L x 350mm W & black P.P. anti-siphon bottle trap (6 Nos.) iv) Water Tap :- 3 way Water Tap Brass with Powder Coated (6 Nos.) v}Reagent Rack Size:-600mm+600mm+1200mm+1200mmL x300mm D x 730mm H (1 No.) Fitted of 6/16 Amp MCB Switch Sockets North-West Make(Witho ut Wirirng) (12 Nos.) vi)Two Way Gas Tap (0 my Fitted Internal Lining In Client Scope) (6 Nos.) vii) Utility:- Water Line/Draing Line/Gas Line as directed by Engineer in charge.

Providing and supplying Shower cum Eye Wash (Hand Operated) MOC. Brass with cromium Plating Handle :- ABS as directed by Engineer in charge.

Providing and supplying of PEG BOARD Made from 15 mm thick clear accrylic sheet & 12 mm dia 6" Le ngth white P.P. Pegs 20 Nos with drain pipe nozzle as directed by Engineer in charge.

Providing and supplying of ANTI VIBRAT1ON TABLE of Size :-750mm Lx 600mm Dx 900 mm H Outer Body made from 20 swg GI Sheet with Powder coating. Balance Slab Made from RCC. 650mm L x 500mmW x 110mm H + 18mm Thick Black Granite on Top Portion balance Slab supported on frame work made of 40x40x2mm r ERW CRCA Square Tube Coated With epoxy powder (70 Micron),And Supplied with vibration dampers. iv)Electric Trunking Size:-775mmL xl00mm D xl00mm H:-1No Fitted of 2Nos 6/16 Amp Switch Socket North-West Make as directed by Engineer in charge.

Providing and supplying of STORAGE CUPBOARD Size :- 1000mm Lx 450mm Dx 1800mm H With Two Ho rizantal Campartme nt . Each Campartment 2 Nos Of Adjustable Shelf Total Shelf 4 Nos & 1 No is fix type .MOC:-20 G GI Sheet With Powder coated. 4mmthick clear Glass Door With God rej Lock & Hand Ie as directed by Engineer in charge.

Providing and supplying of CHEMICAL STORAGE with Ventilation Size :- 1000mm L x 450mm D X 1800mm H MOC : 1.2mm-18g GI Sheet with epoxy powder coating Internal lining eproxy of Phenolic resin for prevention against rust 5 nos. Adjustable Poly PP Shelves. Two toughned glass doors with lock and key arrangement - PP Ducting Charges (Running feet) 6"Dia (150mm)- 5Rft. as directed by Engineer in charge.

Providing and supplying of FUME HOOD Laboratory Fume Hood (5 feet) 1.5Mtr Auto Bypass Type, Standard Overall Dimension with Base Cabinet :-1500mm L x 1000mm W x 2400mm H External Size:- 1500mm L x 1000mm W x 1600mm H Internal Size:- 1220mm L x 750mm W x 1155mm H Chemical Storage Base Cabinet (5 Feet) 1.5 Mtr- 1No Size:- 1500mm L x 700mm W x 700mm H Centrifugal Blower (1.5 HP) -Cluster Chemical Storage:-1No PP Ducting Charges (Running feet) 10" (250mm)-15Rft Apparatus Holding Grid for ST-1500 (Epoxy Solid Rod):-1No As per Specification 1. Design Basic-Compliances of American Design Standard: ASHRAE 110-1995 All test Including “Tracer gas containment test” Passed European Design Standard: EN 14175-2003 Inner Plane Containment test Passed 2. Design Structure-Aerodynamic, Floor mounted 3. Airflow Type-Auto Bypass Type (for non-AC labs) 4. Construction (Exterior):-Powder coated (70 to 80 microns) durable, attractive Grey & Blue 1.2mm & 1.0mm heavy duty GI (Galvanized Iron) (as per IS: 277) sheets with rigid structure. 5. Front Top Panel:-Easily openable hinged Top Panel for easy access to Flow Control Valve and Electrical Lighting fixtures for maintenance 6. Corner Post -Triangular Profiled Corner Post made of Highly chemical resistant Polyurethane Powder coated (70 to 80 microns) durable, attractive Grey color, 1.2mm thick heavy duty GI sheet. It is placed on Left and Right Hand Side of the Fume hood and it houses the utility line fittings and electrical receptacles. 7. Construction (Interior)-Chemical & Heat Resistant, Fire Retardant, Smooth Finish, Easily Cleanable Panels Made out of durable special material integral work walls. (6 mm thick PRL). ASTM flame spread index < 25 8. Baffle arrangement:-Chemical & Heat Resistant, Fire Retardant, Smooth Finish, Easily Cleanable Panels Made out of durable special material integral work walls. (6 mm thick PRL). ASTM flame spread index < 25 9. Airfoil:-Aerodynamic, SS 304 Powder coated (1.2mm) airfoil mounted on the worktop. 10. Worktop:-Chemical resistant splash & spillage proof dished ‘Jet Black Granite’ worktop. (18 to 20mm thick) 11. Sink, Water tap with drain arrangement:-Worktop will have oval/round shaped 100 mm X 200 mm sink for drainage with water tap on left side of worktop. 12. Sash (Shutter):-Vertical rising counter-balanced sash. Toughened Float Glass sash (5 mm thick). Smooth and light sash operation. Clear openable height = 750 mm. Impact Resistance of the sash (Toughened Glass) is four times higher than other sash materials (like Safety Glass and Polycarbonate). Breaking Stress value for fully toughened glass (Tempered Glass) = 24,000 psi. 13. Wet & Dry Service fittings:-Remotely operated colour coded Needle Valves for fine control over utilities (as per DIN 12920 norms) total 3 nos. service valves with PU plumbing with 6mm internal dia, withstands up to 15 kgf pressure and brass fittings for gas connections. • 1L for Water above the sink, • 2L for LPG Located in the corner post on left hand side of the Fume hood. The Utility line taps are staggered in the fume hood to avoid the intermingling of the flexible tubes. Also the taps are tapered in shape to use with flexible tubing of sizes from ¼” to ½” in dia, to provide greater flexibility to the user. Note: - Our Scope of supply for utility lines ends at 1/4th BSP male adopter. 14. illumination :-2 Ft Tube LED Light Wipro make (T5 18 Watt) 15. Electrical Utilities:-Four nos. electrical sockets North West make (230 V, 20 A,50 Hz), Four nos.‘NorthWest’ make MCBs with blower NO/NC switch (with built in starter) & light switch on front fascia. Cables & wires ‘Fire Retardant’ grade. 16. Cable entering port:-For easy access of cables from fume hood to electrical sockets. 17. Chemical Storage Base Cabinet -Base cabinet will be ready to receive the fume hood at its top. It will have following features: • Internal special chemical resistant material lining to the cabinet walls • Two exhaust ports connected to the fume hood exhaust system internally. • Complete powder coated attractive colour combination rigid structure to support Fume hood. • One removable horizontal partition to store chemicals. • Double skin hinged doors with hinges made of Polyamide for Chemical resistance and hassle free operations in the corrosive lab atmosphere. • PP Trays for chemical storage • Fully openable back panels for service line access Overall Dimensions: 1500 mm (W) X 700 mm (D) X 700 mm (H) 18. Level adjusting screws:-Made of SS Bolts to adjust the fume hood level by + 10 mm. 19. Exhaust Port:-Unique exhaust port design ensures that the fumes will be exhausted smoothly without any turbulence at the exhaust port. Also it ensures low noise level. 20. Flow control valve-To regulate airflow. 21. Noise Level-< 70db at 1 meter from fume hood. 22. Apparatus Holding Grid:-A grid made up of Solid Epoxy Rod (Dia. 12.7 mm) to hold the apparatus. It will cover the entire length of the fume hood and will be built-in at fume hood backside. Installed at the distance of 150 mm from backside of fume hood A) ULTRA FAB’ CENTRIFUGAL BLOWER: -Silent PP high efficiency remote blower, consisting of continuous rating motor and chemical resistant impeller. It satisfies international safe velocity norms. 1. Construction-SISW type, chemical & heat resistant PP + FRP blower with aerodynamically balanced impeller, with drain plug. 2. Air Suction Capacity-800 to 1000 CFM confirming to international (0.5mtr/sec)face velocity norms and as per safe fume hood airflow pattern 3. Motor-‘Crompton / LHP’ Eqivalent make, 1.1 KW 1.5HP Motor 3 Phase TEFC, IP 55, Class F, direct drive, continuous rating. As per IS 325. 23. B) DUCTING: Chemical resistant PP 2.5Kg rigid & flexible ductwork from Fume hood to exhaust stack point with weatherproof canopy. Total ducting with horizontal, vertical members, flanges, bends, bracketed supports and gooseneck exhaust stack. Duct dia. 250mm. as directed by Engineer in charge.

Providing and supplying of Shower cum Eye Wash (Hand/Foot Operated) This contains mainly two types of showers i.e. one for Face protection at lower level and Second for Full Body protection. Both the showers can either be operated simultaneously or singularly as per the requirements. Showers are fitted with pull chain for Body Shower as well as Foot operated for Face wash. Material of construction: Pipe: GI (C-Class) heavy grade confirming to IS: 1239 Self closing valve: Stainless steel. Bowl for eyewash: Highly visible yellow anti corrosive plastic Eye wash nozzles: Highly visible Black anti corrosive plastic (Automiser). Shower head: Highly visible yellow anti corrosive plastic. Foot Pedal: MS Galvanized Spring: MS Galvanized Pull chain - MS Gailvanised. as directed by Engineer in charge.

Providing and supplying of WALL STORAGE CUPBOARD-2/S size:- 600mm L x 350mm W x 750mm H Completely made of 1.0 mm GI sheets with Epoxy Powder coated & 1Shelf & 2 shutters 4mm Thick Glassl Door with Lock & Handle as directed by Engineer in charge.

Providing and supplying of CYLINDER STORAGE CABINET Size :-900mm L x 450mm D x 1650mm H MOC:- 1mm Thick GI Sheet Sheet with Epoxy Powder Coating i) Two Shutter Front Openable ii) 2Nos Clamp For Gas Cylinder Support as directed by Engineer in charge.

Applying two coats of Birla (white cement based) or Asian (acrylic lapy- putty) or equivalent & two coats of primer of approved brand and manufacture on new wall surface to give an even shade including thoroughly brushing the surface free from mortar dropping and other foreign matter and sand papered smooth.

Wall painting (two coats) with plastic emulsion paint of approved brand and manufacture on undecorated wall surface to give an even shade including throughly brushing the surface free from mortar droppings and other foreign matter and sand papered smooth.

Painting two coats (excluding priming coat) on new steel / wood surface with enamel paint, brushing, interior to give an even shade including cleaning the surface an even shade including cleanicn the surface of all dirt, dust and other foreign matter.

Providing and laying (to level or slopes) and jointing with stiff mixture of Cement Mortar in proportion 1:1 Selt glazed stoneware pipes including testing of pipes and joints complete.(A) 100mm dia. (upto 10 ton)

Providing and fixing to wall, ceiling and floor galvanised Mild steel tubes (Medium grade) of the following nominal bore, tube fitting and clamps including making good the wall ceiling and floor.(D) 32mm (upto 10 ton)

Providing and fixing to wall, ceiling and floor galvanised Mild steel tubes (Medium grade) of the following nominal bore, tube fitting and clamps including making good the wall ceiling and floor.(B) 20mm (upto 10 ton)

Providing and fixing 15 mm O/S dia Copper pipe (Max floor Copper tube) as directed.

Providing and fixing 15 mm dia Isolation valve of IBP Conex make or an equivalent as directed.

Constructing Brick masonry road gully chamber 500mm x 450mm x 600mm including 500mm x 450mm C.I. horizontal grating wih frame complete. (upto 10 ton)

Providing sock pit of 2.00 Cu.M. Volume including excavating and filling brickbats with dry masonry work at top for 45cm. height including covering the top with stone including providing vatas in C.M. 1:3 with finishing curing etc. complete as directed. (upto 10 ton)

Providing erecting and fixing double coated Syntex PVC. (ISI) water tank of required capacity each with all necessary fittings and connection etc. complete on terrace.

P & L 24" x 24" vitrified 8 mm thick tile flooring over 20 mm (average) base of cement mortar 1:3 ( 1 cement: 3 coarse sand) on new surface or fixing on existing flooring by adhesive material including dismentaling of existing flooring and jointed with color cement slurry including finised with flush pointing & cleaning the surface etc. complete for light shade (upto 10 ton)

Extra over item 24.1 for providing salt Glazed stoneware fittings.(i) Bends of required degree (any redious) of following nominal diameters. (A) 100mm dia. (upto 10 ton)

NAUSHAD M HASNANI

Dharmik Construction