Loading…
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹42.0 LAccepted-AOC D NO 271D3 5 ANDAL PLOT NO 30 N0 76 DHARANI SQUARE PERAMANUR VILLAGE MARAMALI NAGAR CHENGALPATTU KANCHIPURAM 603 209 | CHENGALPATTU | KANCHIPURAM | TAMIL NADU | 603209 | L1 | Accepted-AOC L1 | |
| 2 | L2₹44.1 L+₹54,549.04 (1.25%)Rejected-Finance NO 2 98 TRICHY MAIN ROAD PIDAGAM POST VILLPURAM TALUK 605401 | PIDAGAM | VILLUPURAM | TAMIL NADU | 605401 | L2 | Rejected-Finance L2 |
| Sl No | Description | Qty | Unit | K DHINAKARAN L2 | MK DHANALAKSHMI ENGINEERING PRIVATE LIMITED L1 |
|---|---|---|---|---|---|
| 1.00 | Soil investigation by auger up to the depth of 20 M or up to refusal strate where N - value is obtained 50/100 whichever met earlier. Conducting Penetration Test at the change of layer and at specified interval of 1 M to 1.5 M, carrying out las tests as per IS standards, providing report with recommendation for foundation including mobilisation and demobilisation, shifting from location to location, water charges for drilling, etc complete. | 1 | No. | 50,000 ₹50,000 | 48,000 ₹48,000 Lowest |
| 2.00 | Labour Charges for conducting check survey, pegging, marking of pits for tower foundation as per the apporved profile including chaining and carring theodolite instrument, measuring span length and pit marking including cost of all men and materials as directed by Department Engineer at site. | 1 | Loc | 2,000 ₹2,000 Lowest | 2,000 ₹2,000 Lowest |
| 3.00 | Transport of piling and boring equipments such as boring rig, winches, motors, bentonite pump, shells, boiler casing pipe, etc., to location by pulling into river using crane including transport and hire charges etc., complete. | 1 | Loc | 60,000 ₹60,000 | 58,000 ₹58,000 Lowest |
| 4.00 | Setting of pilling and boring equipment, tripod with all accessoiries and tools at each pile location based on the sequence of operation approved by the Engineer incharge at site irrespective of the location and distance of the boring rig for 600 mm dia pile including mobilisation and demobilisation after completion of pilling works ect., complete. | 8 | Nos. | 15,000 ₹1,20,000 | 14,000 ₹1,12,000 Lowest |
| 5.00 | Supplying, fabrication of 6mm M.S.sheet for making into circular casing shape to the required dia including welding, placing in position and driving into bore hole including cost of all materials and MS plate, all labour charges etc., complete,-600mm dia | 24 | RM | 1,000 ₹24,000 Lowest | 1,000 ₹24,000 Lowest |
| 6.00 | Boring and concreting of vertical reinforced concrete pile 600 mm dia upto required depth from tip of the in all clauses of soil using pile augurs for boring using Bentonite slurry and filling the bore with RCC 1:1:2 concrete using 20 mm machine creshed metal and a maximum water cement ratio not exceeding 0.50 with admixture of CONCARE or equivalant make 1.2 lit. per cum. of concrete, as per specification including cost of all materrials, Labour, lead, lift etc, complete (But excluding cost of steel reinforcemnet).- 600mm dia | 168 | RM | 5,500 ₹9,24,000 | 5,300 ₹8,90,400 Lowest |
| 7.00 | Chipping and dismantling of pile concrete from bed level to cutoff level of pile to met sound concrete and clearing the dismantled concrete from pile location including cost of all labour charges ect., complete. | 3.14 | M3 | 5,500 ₹17,270 | 5,300 ₹16,642 Lowest |
| 8.00 | Providing Shoring and Strutting using necessary Country Wooden Planks 40mm thick and 8cm to 10cm dia. Casuring, Vertical posts at every 300mm C/C of 1.80m height duly support including placing and making the two rows of planks of top and bottom and one middle row of casuring with strutt arrangements at top so as to afford easy laying as cables. The rate shall also include necessary storage charges for the caasurina and country Wooden Planks at suitable place so as not to affect the traffic and movement of public transporting them to work spot lead lift besides the cost of materials ect., complete. (Any other improved method of shoring and strutting is also accelptable to TANTRANSCO But at no extra cost to TANTRANSCO | 79 | M2 | 100 ₹7,900 Lowest | 100 ₹7,900 Lowest |
| 9.00 | Earth Work excavation in all soils including slush and silt under water requiring the aid of basket and vessels for forming cable trench and cable duct at roadcrossing 60cm wide and 150cm deep (clear) including cos of signal boards, danger lights, indication arrangements wherever necessary and proving shorting and strutting arrangements wherever necessary all lead, lift, labour, tools and plants ect., complete. | 32.38 | M3 | 250 ₹8,095 Lowest | 250 ₹8,095 Lowest |
| 10.00 | Labour charges for Filling with Sand in layers well rammed, watered and compacted as per standard specification including cost of all materials, lead, labour, ect., complete. | 1.17 | M3 | 1,800 ₹2,106 Lowest | 1,800 ₹2,106 Lowest |
Tender Value
₹42.1 L
EMD Value
₹42,100
Closing Date
11 Aug 2025, 2:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
SE/GCC-I/CNI
230KV GIS SS Complex, A-10, Thiru-Vi-Ka Industrial Estate, Guindy, Chennai-32
as per NIT
2025_EB_586825_1
OT-030/25-26 of SE/GCC-I/CNI
Open Tender
Civil Works
Works
120 days
Perumattunallur
Please refer Tender documents.
2 documents required · 2 mandatory
₹0
₹42,100
Yes
13 Oct 2025
29 Jul 2025
12 Aug 2025
29 Jul 2025
11 Aug 2025
29 Jul 2025
Amount
Soil investigation by auger up to the depth of 20 M or up to refusal strate where N - value is obtained 50/100 whichever met earlier. Conducting Penetration Test at the change of layer and at specified interval of 1 M to 1.5 M, carrying out las tests as per IS standards, providing report with recommendation for foundation including mobilisation and demobilisation, shifting from location to location, water charges for drilling, etc complete.
Labour Charges for conducting check survey, pegging, marking of pits for tower foundation as per the apporved profile including chaining and carring theodolite instrument, measuring span length and pit marking including cost of all men and materials as directed by Department Engineer at site.
Transport of piling and boring equipments such as boring rig, winches, motors, bentonite pump, shells, boiler casing pipe, etc., to location by pulling into river using crane including transport and hire charges etc., complete.
Setting of pilling and boring equipment, tripod with all accessoiries and tools at each pile location based on the sequence of operation approved by the Engineer incharge at site irrespective of the location and distance of the boring rig for 600 mm dia pile including mobilisation and demobilisation after completion of pilling works ect., complete.
Supplying, fabrication of 6mm M.S.sheet for making into circular casing shape to the required dia including welding, placing in position and driving into bore hole including cost of all materials and MS plate, all labour charges etc., complete,-600mm dia
Boring and concreting of vertical reinforced concrete pile 600 mm dia upto required depth from tip of the in all clauses of soil using pile augurs for boring using Bentonite slurry and filling the bore with RCC 1:1:2 concrete using 20 mm machine creshed metal and a maximum water cement ratio not exceeding 0.50 with admixture of CONCARE or equivalant make 1.2 lit. per cum. of concrete, as per specification including cost of all materrials, Labour, lead, lift etc, complete (But excluding cost of steel reinforcemnet).- 600mm dia
Chipping and dismantling of pile concrete from bed level to cutoff level of pile to met sound concrete and clearing the dismantled concrete from pile location including cost of all labour charges ect., complete.
Providing Shoring and Strutting using necessary Country Wooden Planks 40mm thick and 8cm to 10cm dia. Casuring, Vertical posts at every 300mm C/C of 1.80m height duly support including placing and making the two rows of planks of top and bottom and one middle row of casuring with strutt arrangements at top so as to afford easy laying as cables. The rate shall also include necessary storage charges for the caasurina and country Wooden Planks at suitable place so as not to affect the traffic and movement of public transporting them to work spot lead lift besides the cost of materials ect., complete. (Any other improved method of shoring and strutting is also accelptable to TANTRANSCO But at no extra cost to TANTRANSCO
Earth Work excavation in all soils including slush and silt under water requiring the aid of basket and vessels for forming cable trench and cable duct at roadcrossing 60cm wide and 150cm deep (clear) including cos of signal boards, danger lights, indication arrangements wherever necessary and proving shorting and strutting arrangements wherever necessary all lead, lift, labour, tools and plants ect., complete.
Labour charges for Filling with Sand in layers well rammed, watered and compacted as per standard specification including cost of all materials, lead, labour, ect., complete.
Providing foundation concrete in PCC 1:3:6, using 20 mm HBG stone including cost of cement, and all materials labour, lead, lift etc complete.As department enigineer at site
Providing and laying RCC in M20, mix using 12 to 20mm graded hard machine broken granite stone with form work materials,transport, curing, labour, lead, lift etc. complete.as per standard specification and as directed by the dept. Engineer at site.(Raft and columns Concrete)
Providing steel reinforcement for all RCC works including cost of all materilas steel, binding wire, labour, lead, lift, cutting, bending, typing and binding and placing in position etc., complete as directed by the department engineer at site.
Labour charges for Refilling with Excavated earth in layers well consolidated as per standard specification including cost of filling lead, lift, labour for filling, well ramming consolidation etc., complete
Labour charges for bailing out of water by using pumpset including the cost of heir charges for diesel pumpset 3/5HP, labour fuel charges, transport, T & P, lead, lift ect., complete as directed by the department engineer at site.
Labour charges for installation of stub and cleats and template in position & allignment and shifting template from location to location and reassambling the same including cost of all labour, transport, lead, lift, etc., complete as directed by the department engineer at site.
Fabrication galvanising and supply of HT tower parts in accordance with boards design as per drawings furnished and as per IS:2062 Grade A and as detailed in this specification including cost of all materials, labour, leads, and lifts etc., complete as directed by the department engineer at site.
Fabrication galvanising and supply of MS tower parts in accordance with boards design as per drawings furnished and as per IS:2062 Grade A and as detailed in this specification including cost of all materials, labour, leads, and lifts etc., complete as directed by the department engineer at site.
Supply of hot dipped GI bolts & nuts, including packing wahsers and electro galvanished spring washers as per relevent Istest IS including cost of all trasport charges leads and lifts etc., as per standard specification and as directed by the department engineer at site.
Labour charge for transporting and erection of tower parts including sorting out of tower parts at stores and site, rectification in tower parts if any, cost of T&P, labour, transport from stores, lead, lift, etc., complete as directed by the department engineer at site.
Labour charges for welding of bolts and nuts at two places 1 cm each diagonally opposite each other after tightening and puching to avoid theft of tower parts with one coat of painting zinc coat in the welded portion including cost of welding rod, hire charge for generators, painting the bolts and nuts transporting labour, lead, lift etc complete as per instrution incharge of department engineer at site
Providing special type earthing with 2 Nos 50mm dia GI "C" class pipe as per standard specification, approved drawing and as directed by the Engineer incharge including lowering the earth wire from earth peak to the ground and connecting to the earth pipe, connecting the tower legs and earth pipes by 7/3.55 mm GI earth wire with suitable clamps and providing 2 Nos 150mm dia. bore for a depth of 3.6m for each tower location and placing of GI pipes 50mm dia C class 3m long into the bore, filling with Charcoal and salt in the annular space, providing 2 Nos RCC rings 60cm dia, 50mm tk for each earth pipe and anti climbing arrangements using GI barbed wire and evice including cost of all materials ,lead,lift etc., complete.
Plastering in CM 1:3 12 mm thick including cost of all materials, transport, curing, labour, lead, lift etc. complete.as per standard specification and as directed by the dept. Engineer at site .
Fabrication supply, painting Number Plate with one coat red oxide and two coat enamel paint for back ground lettering with enamel paint of approved colour fixing in tower including cost of all materials, labour, T&P, transport, lead, lift, etc., complete as directed by the department engineer at site.
Fabrication, fixing and painting phase plate (Set for 3 nos) with one coat red oxide and two coat enamel paint for back ground lettering with enamel paint of approved colour fixing in tower including cost of all materials, labour, T&P, transport, lead, lift, etc., complete as directed by the department engineer at site.
Fabrication supply, painting Danger Board with one coat red oxide and two coat enamel paint for back ground lettering with enamel paint of approved colour fixing in tower including cost of all materials, labour, T&P, transport, lead, lift, etc., complete as directed by the department engineer at site.
Fabrication supply, painting Name board with one coat red oxide and two coat enamel paint for back ground lettering with enamel paint of approved colour fixing in tower including cost of all materials, labour, T&P, transport, lead, lift, etc., complete as directed by the department engineer at site.
GST for bidders within TamilNadu
GST for bidders outside TamilNadu (IGST)
K DHINAKARAN (BID ID -1424417)
stage.html
html • 0.04 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .