Construction of Guard room at Gate no-2 in Township at HAL Korwa.

Hindustan Aeronautics Limited

(Avionics Division, Korwa)

DEPARTMENT OF CIVIL ENGINEERING

CHECK LIST FOR SUBMITTING E-TENDER

NAME OF WORK:- Construction of Guard room at Gate no-2 in Township at HAL Korwa.

NIT No.- HAL/KWD/Civil/18 of 26-27 Date: 22.09.2026

Name of Contractor:

S. N. Essential Criteria /Desirable criteria. Please write submitted or not submitted below

1 ANNUAL TURN OVER: -Average Annual Turnover during the last 3 years, ending 31st March-2026 (Provisional certificate is acceptable) of previous financial year, should be at least 30% of the approximate estimated amount put to tender.

2 EMD (As per NIT)

3 SOLVENCY CERTIFICATE- Solvency certificate from any nationalized or scheduled bank i.e.minimum 40% of Estimated value.

4 EXPERIENCE: Experience of having successfully completed similar works during last 7 years ending last day of month previous to the one in which applications are invited should be either of the following.

5 Three similar completed works each costing not less than the amount equal to 40% of the approx estimated amount. OR

i) Two similar completed works each costing not less than the amount equal to 50% of the approx estimated amount. OR

ii) One similar completed work costing not less than the amount equal to 80% of the approx estimated amount.

6 Registration certificate with Government department and Government undertaking, if any.

7 ELECTRICAL LICENSE

8 Proof of GST registration

9 Copy of PAN/ GIR No. Registration Certificate issued by Income Tax Authority.

10 Constitution and legal status.( Partnership/ Proprietary)

11 Details of Bank name , brance code, address, IFS code and Account number on letter head.Please attach scanned copy of blank cheque for reference.

12 The rate quoted shall be inclusive of all taxes. Tenderers are required to make the DATA ENTRY of the item rate in figures only and rate in words will be automatically generated.

13 Tenderers are required to attach Format of undertaking as per Annexure I & J

14 Signature done, wherever required.

Abstract Estimate

Name of Work : Term contract for Civil Maintenance works in Township at HAL Korwa. 2017-18

Time Required for

(a) Conclusion of contract- 03month

(b) Completion of works- 12 Months

Sl. No. Particulars Amount In Rs. Reference

1 Term contract for civil maintenance works in township for repair & maintenance of buildings, water supply lines, sanitary fittings, approach roads, floors, pavings etc and allied civil works required for completion of work.

a Civil Works #REF! [Annexure- D-1]

2 Add 5% towards contigencies #REF!

Grand Total #REF!

Say ` 14.07 Lakhs

Sr. Manager (Works ) ATA

(Satyendra K Maurya) (SK Chaudhury)

Name of Work : Term contract for Civil Maintenance works in Township at HAL Korwa. 2017-18

1 SCHEDULE - "A" (PART-A) #REF!

2 SCHEDULE - "A" (PART-B) #REF!

Contingency @ 5% #REF!

Grand total #REF!

SAY : 14.07 Lakhs

HINDUSTAN AERONAUTICS LIMITED

AVIONICS DIVISION, KORWA

POST OFFICE: HAL, TEH: AMETHI

DISTT: AMETHI (UP) - 22 74 12

HINDUSTAN AERONAUTICS LIMITED

AVIONICS DIVISION, KORWA

POST OFFICE: HAL, TEH: AMETHI

DISTT: AMETHI (UP) - 22 74 12

Name of Work:- Construction of Guard room at Gate no-2 in Township at HAL Korwa.

NIT No: HAL/KWD/Civil/18 of 26-27

Note:- Tenderers are requested to quote their offer in percentage either above or below on CPWD DSR-2023 Volume I & II (Rates). All relevant items shall be executed as per CPWD specifications and CPWD DSR 2023, materials specifications shall be as mentioned in the Bill of quantities and as per the List of approved make/brand as provided in tender document and as per the direction of Engineer-in-charge.

NAME OF AGENCY (To be filled in highlighted box ) :

Sl. No. Description of item Qty. Unit Rate derived excluding GST @18% & BOCW@1% Amount excluding GST @18% & BOCW@1% in ( Rs.)

Part-(A) -CIVIL WORKS

1 EARTH WORK & ANTITERMITE TREATMENT

1.1 Surface dressing of the ground including removing vegetation and in-equalities not exceeding 15 cm deep and disposal of rubbish, lead up to 50 m and lift up to 1.5 m. All kind soil all complete as per specification and direction of EIC. 80.00 Sqm 25.33 2026.40

1.2 Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kinds of soil, all complete as per specification and direction of EIC. 80.00 Cum 131.68 10534.40

1.3 Diluting and injecting chemical emulsion for POST-CONSTRUCTIONAL anti-termite treatment (excluding the cost of chemical emulsion) :

Treatment of soil under existing floors using chemical emulsion @ one litre per hole, 300 mm apart including drilling 12 holes and plugging with cement mortar 1 :2 (1 cement : 2 Coarse sand) to match the existing floor: With Chlorpyriphos/Lindane E.C. 20% with 1% concentration including labour, material, cartage, T&P etc. all complete as per specification and direction of EIC. 80.00 Sqm 230.02 18401.60

1.4 Filling available excavated earth (excluding rock) in trenches ,plinth,sides of foundation etc . in layers not exceeding 20cm in depth ,consolidating each deposited layer by ramming and watering lead upto 50m and lift upto 1.5m all complete as per specification and direction of EIC. 47.00 Cum 145.41 6834.27

1.5 Excavating, supplying and filling of local earth (including royalty) by mechanical transport upto a lead of 5km also including ramming and watering of the earth in layers not exceeding 20 cm in trenches, plinth, sides of foundation etc. complete all complete as per specification and direction of EIC. 13.00 Cum 519.68 6755.84

1.6 Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing all complete as per specification and direction of EIC. 12.00 Cum 1575.54 18906.48

2 PLAIN CEMENT CONCRETE, PLINTH PROTECTION

2.1 Providing mixing and placing Plain Cement Concrete : 1:4:8 (1 Cement : 4 coarse sand (zone-Ill) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources) in foundation, under floors or any other similar description of works eg. drains, pipe lines bedding layers, manholes, road, chambers, duct etc with mechanical mixing including form work, side shuttering, compaction, curing also including , materials, labour, cartage, T&P etc, required for proper completion of the work as per specification and direction of E.I.C. 17.71 Cum 5053.61 89514.59

2.2 Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand (zone- III) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources) over 75mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling & dressing & finishing the top smooth including labour, material, cartage, T&P etc. all complete as per specification and direction of EIC. 34.43 Sqm 555.88 19138.95

2.3 Providing and fixing glass strips in joints of terrazo/ cement concrete floors. (40x4)mm including labour, material, cartage, T&P etc. all complete as per specification and direction of EIC. 31.50 Meter 68.07 2144.21

3 REINFORCED CEMENT CONCRETE WORK

3.1 Providing and laying in position ready mixed or site batched design mix cement concrete for reinforced cement concrete work; using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland /Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to accelerate / retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage for all leads; but excluding the cost of centering, shuttering, finishing and reinforcement as per direction of the engineer-in-charge; for the following grades of concrete. Note: Extra cement up to 10% of the minimum specified cement content in design mix shall be payable separately. In case the cement content in design mix is more than 110% of the specified minimum cement content, the contractor shall have discretion to either re-design the mix or bear the cost of extra cement. including labour, material, cartage, T&P etc. all complete as per specification and direction of EIC. All works upto plinth level .Concrete of M25 grade with minimum cement content of 330 kg /cum 16.00 Cum 7051.28 112820.48

3.2 Providing and laying in position ready mixed or site batched design mix cement concrete for reinforced cement concrete work; using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland /Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to accelerate / retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage for all leads; but excluding the cost of centering, shuttering, finishing and reinforcement as per direction of the engineer-in-charge; for the following grades of concrete. Note: Extra cement up to 10% of the minimum specified cement content in design mix shall be payable separately. In case the cement content in design mix is more than 110% of the specified minimum cement content, the contractor shall have discretion to either re-design the mix or bear the cost of extra cement. including labour, material, cartage, T&P etc. all complete as per specification and direction of EIC. All works above plinth level upto floor V level .Concrete of M25 grade with minimum cement content of 330 kg /cum

R C C COLUMN 9.00 Cum 7315.13 65836.17

3.3 Providing and laying in position ready mixed or site batched design mix cement concrete for reinforced cement concrete work; using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland /Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to accelerate / retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage for all leads; but excluding the cost of centering, shuttering, finishing and reinforcement as per direction of the engineer-in-charge; for the following grades of concrete. Note: Extra cement up to 10% of the minimum specified cement content in design mix shall be payable separately. In case the cement content in design mix is more than 110% of the specified minimum cement content, the contractor shall have discretion to either re-design the mix or bear the cost of extra cement including labour, material, cartage, T&P etc. all complete as per specification and direction of EIC. All works above plinth level upto floor V level .Concrete of M25 grade with minimum cement content of 330 kg /cum

BEAMS, SLAB, SUNSHED etc. 31.00 Cum 7315.13 226769.03

3.4 Providing, fabricating, fixing and removing Form work / shuttering of side of concrete in required shape and size, with true line & plumb etc. with plywood / MS plates shuttering including oiling of the top surfaces of shuttering , all supports with MS or wooden logs including all braces, struts, balli, etc, including working scaffoldings, ladders, gangways, use & wastage of timber, including removal of formwork & shuttering after the stripping period as described in IS:456-2000 , etc. including all labour, material, T&P, transportation, wastage and other required fixture for proper completion of work as per specification and direction of E.I.C.

3.4 .3 Lintels, beams, plinth beams, girders, bressumers and cantilevers 117.00 Sqm 546.31 63918.27

3.4 .4 Suspended floors, roofs, landings, balconies and access platform 94.00 Sqm 687.90 64662.60

3.5 Providing, laying and fixing TMT ( Thermo-Mechanically Treated bars.) reinforcement bars for any diameter of TISCON / SAIL/ RINL/Gallant / Kamdhenu or any other approved make for all type of R.C.C works including straighting, cut to length, bend to shape required, cranking, bending spirally or hooping, spacers / chairs, wastages and binding with mild steel wires (annealed) not less than 0.90 mm diameter or securing with clips so that placing and ramming of concrete will not displace it (RCC) also including cost of all labour, material, cartage, T&P etc. all complete at all height as per drawing, specification and direction of EIC 4100.03 Kg. 80.01 328043.40

3.6 Providing and laying damp-proof course 40mm thick with cement concrete 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 12.5mm nominal size derived from natural sources) including labour, material, cartage, T&P etc. all complete as per specification and direction of EIC. 27.00 Sqm 304.80 8229.60

3.7 Extra for providing and mixing water proofing material in cement concrete work in doses by weight of cement or as per manufacturer’s specification all complete as per specification and direction of EIC. 6.00 Kg 13.72 82.32

3.8 Providing & applying a coat of residual petroleum bitumen of grade of VG-10 of approved quality using 1.7 kg per square metre on damp proof course after cleaning the surface with brushes and finally with a piece of cloth lightly soaked in kerosene oil or suitable Chemical including labour, material, cartage, T&P etc. all complete as per specification and direction of EIC. 27.00 Sqm 108.42 2927.34

4.1 Providing and laying Brick work with F.P.S bricks of class 150 in foundation and plinth in all shapes and sizes in cement mortar 1:6 (1 cement : 6 coarse sand ) including necessary cutting of bricks as required, wastages,straight or curved including cost of all material, labour, cartage, T&P, curing, scaffolding, wastage, raking out joints up to 1 cm depth as the work proceeds etc. required for proper completion of work and as per specification and direction of EIC. 11.40 Cum 5291.20 60319.68

4.2 Providing and laying Brick work with F.P.S bricks of class 150 in super structure above plinth level up to floor five level in all shapes and sizes in cement mortar 1:6 (1 cement : 6 coarse sand) including necessary cutting of bricks as required, wastages,straight or curved including cost of all material, labour, cartage, T&P, curing, scaffolding, wastage, raking out joints up to 1 cm depth as the work proceeds etc. required for proper completion of work and as per specification and direction of EIC. 38.71 Cum 6755.42 261502.31

4.3 Providing and laying Half brick masonry with F.P.S bricks of class designation 150 in superstructure above plinth level up to floor five level in cement mortar 1:4 ( 1 cement : 4 coarse sand) including necessary cutting of bricks as required, straight or curved, raking out joints up to 1 cm depth as the work proceeds, including all material, labour, cartage, T&P, curing, scaffolding, wastage etc. all complete as per specification and direction of EIC. 23.00 Sqm 833.71 19175.33

4.4 Extra for providing and placing in position 2 Nos. 6mm dia. M.S.bars at every third course of half brick masonry (with F.P.S.bricks) including material, labour, cartage, T&P, scaffolding, wastage etc. all complete as per specification and direction of EIC. 23.00 Sqm 77.75 1788.25

5 DOOR, WINDOW & VENTILATORS ETC.

5.1 Providing and fixing M.S. Tubular frames for doors and cupboard with rectangular/ L-Type sections, made of 1.60 mm thick M.S. Sheet, joints mitred, welded and grinded finish, with profiles of required size, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer including labour, material, cartage, T&P etc. all complete as per specification and direction of EIC. 761.00 Kg 144.81 110200.41

5.2 Providing, fixing and welding factory made ISI marked steel glazed doors, windows and ventilators, side /top /centre hung, with beading and all members such as F7D,F4B, K11 B and K12 B etc. complete of standard rolled steel sections, joints mitred and flash butt welded and sash bars tenoned and riveted, including providing and fixing of hinges, pivots, priming coat of approved steel primer, but excluding the cost of other fittings,glass panes complete all as per approved design,(Z-SECTION), Fixing with 15x3 mm lugs 10 cm long embedded in cement concrete block 15x10x10 cm of C.C. 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) all complete as per specification and direction of EIC.(sectional weight of only steel members shall be measured for payment). 12.82 Kg 97.22 1246.36

5.3 Providing and fixing M.S. grills of required pattern in frames of windows etc. Fixed to steel windows by welding with M.S. flats, square or round bars etc. including priming coat with approved steel primer, labour, material, cartage, T&P etc. all complete as per specification and direction of EIC. 72.00 kg 162.54 11702.88

5.4 Providing and fixing M.S. tube hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of approved steel primer, labour, material, cartage, T&P etc. all complete as per specification and direction of EIC. 220.00 kg 146.00 32120.00

5.5 Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters : 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws, labour, material, cartage, T&P etc. all complete as per specification and direction of EIC. 14.00 Sqm 1775.03 24850.42

5.6 Providing and fixing fly proof galvanized M.S. wire auge(Mosquito jali) to windows and clerestory windows using wire gauge with average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm all complete With 12 mm mild steel U beading including labour, material, cartage, T&P etc. all complete as per specification and direction of EIC. 1.00 Sqm 696.76 696.76

5.7 Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. including labour, material, cartage, T&P etc. all complete as per specification and direction of EIC. 2.00 Nos 834.49 1668.98

5.8 Providing and fixing 125 mm aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS :1868) transparent or dyed to required colour or shade, with necessary screws etc. all complete as per specification and direction of EIC. 16.00 Nos 49.15 786.40

5.9 Providing and fixing 250X16mm aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. all complete as per specification and direction of EIC. 14.00 Nos 193.33 2706.62

5.10 Providing and fixing 150X10 mm aluminium tower bolts, ISI arked, anodised (anodic coating not less than rade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. all complete as per specification and direction of EIC. 8.00 Nos 61.24 489.92

5.11 Providing and fixing 200 X10 mm aluminium tower bolts, ISI arked, anodised (anodic coating not less than rade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. all complete as per specification and direction of EIC. 5.00 Nos 73.96 369.80

5.12 Providing and fixing aluminium hanging floor door stopper ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade with necessary screws etc. complete. Single rubber stopper all complete as per specification and direction of EIC. 2.00 Nos 29.38 58.76

5.13 Providing and fixing PTMT door catcher of length 72 mm and dia. of 42 mm with suitable washers weighing not less than 33 gms. all complete as per specification and direction of EIC. 1.00 Nos 29.71 29.71

5.14 Providing and fixing 4 mm thick glass panes with putty and glazing clips in steel doors, windows, clerestory windows, including labour, material, cartage, T&P etc. all complete as per specification and direction of EIC. 6.00 Sqm 789.83 4738.98

5.15 Providing and fixing 25 mm diameter brass curtain rods of wall thickness 1.25 mm with two brass brackets and two finial fixed with brass screws and wooden plugs etc. wherever necessary complete including labour, material, cartage, T&P etc. all complete as per specification and direction of EIC. 5.00 RM 312.88 1564.40

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever requ ired including cleat angle, Aluminium snap beading for glazing / panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) :

5.16 …………do………. Powder coated aluminium (minimum thickness of powder coating 50 micron) 39.00 Kg 393.86 15360.54

5.17 …………do………. For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) Powder coated aluminium (minimum thickness of powder coating 50 micron) 15.00 Kg 470.68 7060.20

5.18 Providing and fixing glazing with float glass panes of 5 mm thickness (weight not less than 12.50 kg/sqm) in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge. (Cost of aluminium snap beading shall be paid in basic item) 5.40 Sqm 1116.70 6030.18

5.19 Providing and fixing Stainless steel (grade 304) wire gauze of 0.5 mm dia wire and 1.4 mm aperture on both sides fly proof wire gauze to windows, clerestory windows & doors with M.S. Flat 15x3 mm and nuts & bolts complete including labour, material, cartage, T&P etc. all complete as per specification and direction of EIC. 2.70 Sqmt 840.95 2270.57

5.20 Providing and fixing 1 mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer. Using flats 30x6 mm for diagonal braces and central cross piece 2.50 Sqm 4127.57 10318.92

6 DADO/SKIRTING/FLOORING

6.1 Providing and laying 1st quality ceramic glazed wall tiles conforming to IS : 15622 of approved make in colours , shades except burgandy , bottel green , black of any sizes as approved by Engineer -in -Charge in skirting , risers of steps and dados over 12 mm thick bed of cement mortar 1:3 and jointing with grey cement slurry @ 3.3 kg per sqm including pointing in white cement mixed with pigment of matching shade all complete as per specification and direction of EIC. 54.00 Sqm 940.65 50795.10

6.2 Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of 1st quality conformingto IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick bed of cement mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ sq.m including pointing the joints with white cement and matching pigments etc., all complete as per specification and direction of EIC. 12.00 Sqm 975.78 11709.36

6.3 Providing and laying Kata stone slabs 20 mm thick in risers of steps, skirting, dadoand pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement: 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing all complete as per specification and direction of EIC. 11.00 Sqm 1746.88 19215.68

6.4 Providing and laying 600x600 mm vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., all complete as per specification and direction of EIC. 65.00 Sqm 1152.46 74909.90

6.5 Providing and fixing 18 mm thick Granite stone slab of colour black, Cherry/Ruby red gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1 :4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing of edges to give high gloss finish etc. complete at all levels.( Area of slab over 0.50 sqm) including labour, material, cartage, T&P etc. all complete as per specification and direction of EIC. 1.00 Sqm 3810.46 3810.46

7 PLASTER WORK & FINISHING WORK

7.1 Providing, rendering, dubbing out cement plastering 12 mm thick on fair side surface area with cement mortar 1:6 (1 cement: 6 coarse sand (zone-Ill) derived from natural sources) on walls, darins, manholes, ducts etc of fair faces of brick wall / concerete surface including plaster at all floors including jams, soffit and edges of plastering chamfering wherever required, finishing of surface even and smooth without using extra cement with all labour, material, scaffolding, curing, including hacking of concrete surfaces, T&P etc all complete as per specification and direction of EIC. 267.00 Sqm 254.94 68068.98

7.2 Providing, rendering, dubbing out cement plastering 15 mm thick on rough side surface area with cement mortar 1:6 (1 cement: 6 coarse sand (zone-Ill) derived from natural sources) on walls, darins, manholes, ducts etc of rough / fair faces of brick wall / concerete surface including plaster at all floors including jams, soffit and edges of plastering chamfering wherever required, finishing of surface even and smooth without using extra cement with all labour, material, scaffolding, curing, including hacking of concrete surfaces, T&P etc all complete as per specification and direction of EIC. 267.00 Sqm 293.30 78311.10

7.3 Providing, rendering, dubbing out cement plastering 6 mm thick of ceiling with cement mortar 1:3 (1 cement: 3 coarse sand (zone-Ill) derived from natural sources) at all floors including jams, soffit and edges of plastering chamfering wherever required, finishing of surface even and smooth without using extra cement with labour, material, scaffolding, curing, hacking of concrete surfaces, T&P etc all complete as per specification and direction of EIC. 86.00 Sqm 222.89 19168.54

7.4 Add for plaster drip course/ groove in plastered surface or moulding to R.C.C. projections including labour, material, cartage, T&P, curing, etc. all complete as per specification and direction of EIC. 39.00 metre 58.16 2268.24

7.5 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth including labour, material, cartage, scaffolding, T&P etc. all complete as per specification and direction of EIC. 533.19 sq.m 115.77 61727.41

7.6 Providing & applying for new work Two or more coat applied @ 1.67 ltr/10 sqm of weather resistant exterior paint of first quality of approved shade and make like apex of Asian /weather coat long life of Berger / weather shield max of ICI etc including priming coat of exterior primer applied @ 0.90 litre/10 sqm, preparation of surfaces by brooming down, removal of flakes, oil, grease marks by sand papering where required, filling holes /Cracks with birla putty / snowfilla, spreading and removing covering to doors, windows, fittings, floor, etc. to protect from splashes, removing & replacing moveable furnitures, leaving the premises clean and tidy, disposing Rubbish outside in dustbins removal of all splashes and cleaning glass and joinery, use of scaffolding all complete as per specification & direction of EIC. 272.43 Sqm 119.14 32457.31

7.7 Providing and applying two or more coats of acrylic distemper on new work (ready mixed) having VOC content less than 50 gram/litre of approved brand and shade such as Asian/Berger etc. on wall / ceiling surface including a coat of primer, preparation, removing of nails, filling holes / minor pits , cracks with Birala putty wherever required etc. leaving premises clean and tidy with all labour, material, wastage, scaffolding with all protective measures, T&P, cartage etc all complete as per specification and direction of EIC. 267.00 Sqm 137.73 36773.91

7.8 Providing and applying Two or more coats on new work of synthetic enamel painting on wood / steel / wall surface over a coat of wood/ steel/ wall primer for any description of works of approved brand and manufacture such as Asian / Berger / ICI including preparation of surface with Putty filling in cracks, holes etc wherever required, at any height / depth or any descripiton of works at all floors including all labour, material, T&P ,scaffolding all complete as per specification and direction of E.I.C. 50.00 Sqm 167.85 8392.50

8 WATER PROOFING WORK WORK

8.1 Providing and laying integral cement based water proofing treatment including preparation of surface as required for treatment of roofs, balconies, terraces etc consisting of following operations: (a) Applying a slurry coat of neat cement using 2.75 kg/sqm of cement admixed with water proofing compound conforming to IS. 2645 and approved by Engineer-in charge over the RCC slab including adjoining walls upto 300 mm height including cleaning the surface before treatment. (b) Laying brick bats with mortar using broken bricks/brick bats 25 mm to 115 mm size with 50% of cement mortar 1:5 (1 cement : 5 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge over 20 mm thick layer of cement mortar of mix 1:5 (1 cement :5 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge to required slope and treating similarly the adjoining walls upto 300 mm height including rounding of junctions of walls and slabs. 54.00 sqm 1249.75 67486.50

(c) After two days of proper curing applying a second coat of cement slurry using 2.75 kg/ sqm of cement admixed with water proofing compound conforming to IS : 2645 and approved by Engineerin- charge. (d) Finishing the surface with 20 mm thick jointless cement mortar of mix 1:4 (1 cement :4 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineerin- charge including laying glass fibre cloth of approved quality in top layer of plaster and finally finishing the surface with trowel with neat cement slurry and making pattern of 300x300 mm square 3 mm deep.

(e) The whole terrace so finished shall be flooded with water for a minimum period of two weeks for curing and for final test. All above operations to be done in order and as directed and specified by the Engineer-in-Charge : With average thickness of 120 mm and minimum thickness at khurra as 65 mm. With average thickness of 120 mm and minimum thickness at khurra as 65 mm.

8.2 Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate of 20 mm nominal size) over P.V.C. sheet 1 m x1 m x 400 micron, finished with 12 mm cement plaster 1:3 (1 cement : 3 coarse sand) and a coat of neat cement, rounding the edges and making and finishing the outlet all complete as per specification and direction of EIC. 6.00 Each 221.26 1327.56

8.3 Providing gola 75x75 mm deep chase in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 stone aggregate 10 mm and down gauge), including finishing with cement mortar 1:3 (1 cement : 3 coarse sand) all complete as per specification and direction of EIC. 74.58 metre 226.38 16883.42

9 SANITARY FIXTURES ( INTERNAL WATER SUPPLY)

9.1 Providing & fixing white glazed Vitreous china orrissa pan of size 580 x 440 mm with integral type foot rests of make Hindware, Cera, Nycer, Perryware or as approved make including 10 litre capacity PVC low level flushing cistern with PVC flush bend pipe and suitable joint for closet inlet, setting in plain cement concrete 1:2:4(1 cement : 2 coarse sand: 4 ,20 mm graded stone aggregate), around the pan as to get the specified thickness of floor complete in all respect inluding 100mm CI P-trap with extension pipe as required, cutting chases walls and floors and finishing the same in cement mortar 1:3 (1 Cement : 3 coarse sand) etc.all complete as required and as per specification and direction of EIC. 1.00 each 5020.53 5020.53

9.2 Providing and fixing of white glazed Vitreous china European type W.C. pan with white solid plastic seat cover and lid including 10 litre capacity PVC low level flushing cistern with PVC flush bend pipe and suitable joint for closet inlet of make Hindware, Cera, Nycer, Perryware or as approved make in all respect including flush pipe, labour, material, cartage T&P etc. all complete as required and as per specification and direction of EIC. 1.00 each 5939.85 5939.85

9.3 Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required including all complete works as per specification and direction of EIC. (One urinal basin with 5 litre white P.V.C. automatic flushing cistern.) 1.00 each 4643.17 4643.17

9.4 Providing and fixing vitreous china white wash basin flat back 630x 450 mm size of approved make such as Hindware, Cera, Nycer, Parryware including 15 mm C.P. brass pillar tap (L&K, Prayag, Hindware, Parryware, Plumber or as approved by EIC) with 450mm long PVC Connection of Prayag make or equivalent approved make CP waste coupling 32mm dia of L& K, Plumber make, MS / CI bracket for fixing of wash basin painted with white paint all complete including cutting and making goods, fixing with cement concrete 1:2:4 ( 1 cement : 2 coarse sand : 4 graded stone aggregates) and finishing with cement mortar 1:3, the walls and floor with all labour, material, T&P, wastage, cartage etc all complete as per specification and direction of EIC. 1.00 each 1651.66 1651.66

PVC PIPE FITTINGS

9.5 110 MM Providing & fixing 100/ 110 mm dia PVC unplasticised Rigid PVC rain water Single socketed pipes of approved make such as Supreme, Diplast , kishan or equivalent fixed to walls including necessary required MS clamps etc and adhesive for jointing the pipe for sewerage / rain down pipe fixed to wall/ laid in trenches including all labour, materials, tool & plants, wastage, scaffoldings, etc. all complete as per direction of EIC. 54.00 metre 279.98 15118.92

10 Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion including etc. all complete as per specification and direction of EIC.

10.2 Single pushfit Coupler

10.3 Single tee with door

10.4 Single tee without door

10.6 Shoe (Plain)

110 mm bend 1.00 each 97.82 97.82

10.7 Providing and fixing unplasticised - 110mm PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with M.S. screws of required length, including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. all complete as per specification and direction of EIC. 6.00 each 275.46 1652.76

10.8 Providing and fixing 600 x 450 mm x 5.00 mm bevelled edge mirror with the holes on all the four corners of the glass of Modiguard/ Saint Gobain/ Atul or as approved by EIC, complete fixed with SS spacers or 6 mm thick asbestos sheet/ commercial hard board as required, fixed to wooden / PVC cleats with C.P. brass screws and washers all complete with labour, material, T&P, cartage etc and as per specification and direction of EIC. 1.00 each 1192.89 1192.89

11.1 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings like brass socket MTA & FTA, CPVC L band, Elbow, clamps, CPVC Sockets and plug with approved brand ISI marked, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints all complete as per direction of Engineer in Charge.

11.1 (a) 15mm dia nominal bore 9.00 metre 212.77 1914.93

11.1.(b) 25 mm dia. nominal bore 25.00 metre 297.90 7447.50

11.1.(c) 50 mm dia. nominal bore 13.00 metre 693.02 9009.26

11.2 Providing and fixing High or low pressure with plastic floats 25 mm dia. nominal bore ball valve (brass) of approved quality all complete with labour, material, T&P, cartage etc and as per specification and direction of EIC. 1.00 each 301.83 301.83

11.3 Providing and fixing 25 mm nominal bore gun metal non- return valve of approved quality (screwed end) all complete with labour, material, cartage, T&P etc. as per specification and direction of EIC. 1.00 each 438.74 438.74

11.4 Providing and fixing uplasticised 15mm nominal bore PVC connection pipe 45cm length with brass unions all complete with labour, material, cartage, T&P etc. as per specification and direction of EIC. 11.00 each 72.52 797.72

11.5 Providing, placing and fixing on terrace (at all floor levels) polyethylene water storage tank, ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes without base support for tank including all necessary fittings, labour, material, cartage, T&P etc. all complete as per specification and direction of EIC. 1000.00 LT 8.16 8160.00

12 C.P. BRASS FITTING

12.1 Providing & fixing C.P. brass bib cock 15 mm dia of L&K / Hindware / Parryware / Plumber/ Prayag or as approved by EIC including labour, material, T&P, soota, safeda etc all complete as per specification & direction of E.I.C. 3.00 each 262.07 786.21

12.2 Providing & Fixing 15mm dia C.P. brass stop (conceald) of standard design and of approved make by EIC including labour, material, T&P, soota, safeda etc all complete as per specification & direction of E.I.C. 2.00 each 497.39 994.78

12.3 Providing & fixing 15mm dia C.P. brass angle of standard design and of approved make by EIC including labour, material, T&P, soota, safeda etc all complete as per specification & direction of E.I.C. 6.00 each 426.06 2556.36

12.4 Providing & Fixing PTMT soap dish holder having length 138mm, breadth 102mm, height 75mm with concealed fiting arrangements of approved make as parryware or approved by EIC including labour, material, T&P etc all complete as per specification & direction of E.I.C. 3.00 each 82.68 248.04

12.5 Provding & Fixing C.P Towel rail of approved make as parryware or approved by EIC including brackets fixed to wooden cleats with CP brass screw, labour, material, T&P etc all complete as per specification & direction of E.I.C. 3.00 each 499.57 1498.71

12.6 Providing and fixing CP brass Toilet paper holder of make - parryware / L&K/ Plumber/ prayag/ Pearl or as approved by EIC including required accessories all complete with labour, material, T&P, wastage etc as per specification and direction of EIC. 1.00 each 596.24 596.24

12.7 Providing, supplying, and fixing Chromium Plated (CP) Hand Shower / Health Faucet set including a wall hook bracket, 1.5-meter long flexible hose, and required sealing accessories, complete with supplying and installing a CP brass angular stop cock valve, checking for water tightness and testing, as per standard plumbing specifications and direction of the Engineer-in-charge 1.00 each 2450.00 2450.00

EXTERNAL WATER SUPPLY

13 Providing and fixing 75mm to 80mm dia Chlorinated Polyvinyl Chloride (CPVC) pipes, for external work having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. 10.00 metre 1607.15 16071.50

14 Constructing brick masonry for sanitary building chamber for underground C.I. inspection chamber and bends with bricks in cement mortar 1:4 (1 cement : 4 coarse sand) C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover with frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg), R.C.C. top slab with 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), foundation concrete 1:5:10 (1 cement : 5 coarse sand (Zone III) : 10 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand), finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete as per standard design : Inside dimensions 455x610 mm and 45 cm deep for single pipe line including labour, material, cartage, T&P, curing etc. all complete as per specification and direction of EIC. 2.00 Nos 5147.01 10294.02

15 Constructing brick masonry With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 circular manhole 1.22 m internal dia at bottom and 0.56 m dia at top in cement mortar 1:4 (1 cement :4 coarse sand) inside cement plaster 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with a floating coat of neat cement foundation concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size) and making necessary channel in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nomin al size) finished with a floating coat of neat cement, all complete as per standard design : 1.68 m deep with SFRC Cover and frame (heavy duty HD-20 grade designation) 560 mm internal diameter conforming to I.S. 12592, total weight of cover and frame to be not less than 182 kg. fixed in cement concrete 1:2:4 (1cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) including centering, shuttering etc. all complete as per specification and direction of EIC. (Excavation, foot rests and 12 mm thick cement plaster at the external surface shall be paid for separately) 2.00 Nos 18326.21 36652.42

16 Excavating trenches of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, depth upto 1.5 m, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m including labour, material, cartage, T&P etc. all complete as per specification and direction of EIC. 20.00 metre 261.25 5225.00

Part-(B) : ELECTRICAL WORKS 0.00

1 Group C' Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required.(Note: Color code for Phase wire:Red/Yellow/Blue, Neutral: Black & Earth: Green) 30.00 Point 1431.93 42957.90

2 Group C' Wiring for group controlled (looped) light point/fan point/exhaust fan point/ call bell point (without independent switch etc.) with 1.5 sq. mm FRLS/HFFR PVC insulated copper conductor single core cable in surface/ recessed PVC conduit, and earthing the point with 1.5 sq. mm FRLS/HFFR PVC insulated copper conductor single core cable etc. as required. 10.00 Point 835.29 8352.90

3 Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required. 4.00 Each 337.82 1351.28

4 Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required. 1.00 Each 39.50 39.50

5 Supplying and fixing 1 or 2 Module (75mmX75mm) size/ modules, GI box along with modular base & cover plate for modular switches in recess etc. as required. 1.00 Each 297.48 297.48

6 Supplying and fixing modular Telephone socket outlet with GI box, modular plate & modular plate cover etc. including connections as required. 2.00 Each 141.18 282.36

7 Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 A modular socket outlet and 5/6 A modular switch, connections etc. as required. 10.00 Each 457.98 4579.80

8 Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 A modular socket outlet and 15/16 A modular switch, connections etc. as required. 5.00 Each 553.78 2768.90

9 Supplying & fixing suitable size GI box wih modular plate and cover in front on surface or in recess including providing and fixing 25 A modular socket outlet and 25 A modular SP MCB, "C" curve Anchor/ Havells/ L&T/ Legrand/ GM/ABB make including connections, painting etc. as required. 3.00 Each 678.15 2034.45

10 Wiring for circuit/ submain wiring along with earth wire with the 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. 150.00 Meter 261.34 39201.00

11 Wiring for circuit/ submain wiring along with earth wire with the 2 X 4 sq. mm + 1 X 4 sq. mm earth wire of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. 50.00 Meter 313.45 15672.50

12 Supplying and drawing 2 pair 0.5 mm dia FRLS/HFFR PVC insulated annealed copper conductor, unarmored telephone cable in the existing surface/ recessed steel/ PVC conduit as required. 200.00 Meter 32.77 6554.00

13 Supplying and fixing of 20 mm sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required. 200.00 Meter 126.89 25378.00

14 Supplying and fixing 3 pin, 5 A ceiling rose on the existing junction box/ wooden block including connections etc. as required. 6.00 Each 87.39 524.34

15 Supplying, installation, Testing & Commissioning of 36W Panel light 2x2 ft., of Powder coated die cast /Extruded aluminium Body (Thickness > 1.20 mm) body material and construction as per IS : 10322 with driver as per the requirement with Driver efficiency >85%, Operating voltage AC 140-270 Volt, freqency 50/60 hz, Operating temp range -5 0C to 40 0C, internal surge protection of 2.5 KV with Short & Open circuit protection, THD < 10% , P. F.≥0.95, IP20, CRI >80, UGR (Unified Glare Rating) < 19, Flicker free, (flicker should be below 5 %), life time (LED, Driver & electrical circuitry), of minimum 50000 Burning Hours with, 70% of initial Lumen maintained till life ends as per LM80 extrapolation IES TM-21-11 report, CCT 3000°K / 4000°K / 5700°K /6500°K (As per ANSI Bin), SDCM(Standard Deviation Colour Matching) <3, Maximum power consumption should not more than the specified rating and Fixture shall be of relevant BIS standard. Manufactures Word Mark/ Name Engraved/ Embossing/ Screen printing on housing. complete in all respect i/c external connections with 1.5 sq mm FRLS/HFFR, PVC insulated copper conductor single core cable and earthing etc. as required with Minimum 5 year OEM warranty. System lumen efficacy ≥105 <120 lm/Watt output . LM79 & LM80 Test report and all testing required for LED fixtures as per BIS shall be submitted. Shape size and CCT shall be as approved by Engineer-in-Charge as per requirement. (Thermal management: heat sink of aluminium housing such that LED junction temperature shall not rise above 90°C). 12.00 Each 2107.56 25290.72

16 Supplying, Installation, Testing & Commissioning of 36W LED surface mounted Batten light of Powder coated die cast /Extruded aluminium Body (Thickness > 1.20 mm) body material and construction as per IS : 10322 with driver (Replaceable) as per the requirement with Driver efficiency >85%, Operating voltage AC 140- 270 Volt, frequency 50/60 hz, Operating temp range -5 °C to 40 °C, internal surge protection of 2.5 KV with Short & Open circuit protection, THD < 10%, P. F.≥0.95, IP20, CRI >80, Flicker free, (flicker should be below 5 %), life time (LED, Driver & electrical circuitry), of minimum 50000 Burning Hours with 70% of initial Lumen maintained till life ends, CCT 3000°K / 4000°K / 5700°K /6500°K (As per ANSI Bin), SDCM(Standard Deviation Colour Matching) <3, Maximum power consumption should not more than the specified rating and Fixture shall be of relevant BIS standard. Manufactures Word Mark/ Name Engraved/ Embossing/ Screen printing on housing. complete in all respect i/c external connections with 1.5 sqmm FRLS/HFFR, PVC insulated copper conductor single core cable and earthing etc. as required with Minimum 5 year OEM warranty. System lumen efficacy ≥105 <120 lm/Watt output . LM79 & LM80 Test report and all testing required for LED fixtures as per BIS shall be submitted. Shape size and CCT shall be as approved by Engineer-in- Charge as per requirement. (Thermal management: heat sink of aluminium housing such that LED junction temperature shall not rise above 90°C). 12.00 Each 569.75 6837.00

17 Supplying, Installation, Testing & Commissioning of 100W Flood Light, powder coated pressure die cast aluminium body with built in or separate driver as per the requirement with Driver efficiency >85%, Input voltage: Input voltage: 140-270 Volt AC, frequency 50/60 hz, Operating temp range -5 0C to 50 0C, internal surge protection of 5 KV L,N,E as per IEC 61000-4-5, Driver efficiency >85%,THD < 10% as per IEC 61000-3-2, P. F.≥0.95, IP-66,IK-10, CRI >70, under voltage and over voltage protection, EMI-EMC as per CISPR -15, lenses for beam angle 30 deg-120deg as per the application and the project requirement., suitable tilt able fitting, life time (LED, Driver & electrical circuitry) of minimum 50000 Burning Hours with 70% of initial Lumen maintained till life ends as per LM80 extrapolation IES TM-21-11 report, CCT 3000°K / 4000°K / 5700°K /6500°K (As per ANSI Bin) , SDCM(Standard Deviation Color Matching) <5, Maximum power consumption should not more than the specified rating and Fixture shall be of relevant BIS standard complete in all respect i/c external connections with 1.5 sq mm FRLS/HFFR, PVC insulated copper conductor single core cable and earthing etc. as required with Minimum 5 year OEM warranty. System lumen efficacy ≥105 <120 lm/Watt output .LM79 & LM80 Test report and all testing required for LED fixtures as per BIS shall be submitted.. Shape size and CCT shall be as approved by Engineer-in- Charge as per requirement. (Thermal management: heat sink of aluminium housing such that LED junction temperature shall not rise above 90°C). 4.00 Each 1904.20 7616.80

18 Supply, Installation, Testing and Commissioning of 1200mm, service value ≥ 6.0 CM/Min/Watt, air delivery 210 CM/Min (Minimum) ceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos. metal( Aluminium alloy) blades, 30 cm long down rod, 2 nos. canopies,shackle kit, safety rope, copper winding, steel/Al body Power Factor not less than 0.9, Service Value (CM/M/W) minimum as above, 350 RPM (tolerance as per IS : 374-2019), THD (Total Harmonic Distortion) less than 10%, suitable for operation with regulator for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise=75 0C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC supply, Ceiling Fan compliant to IS 374:2019 fan i/c external connections with 1.5 sq.mm FRLS/HFFR, PVC insulated copper conductor single core cable and earthing etc. as required. 4.00 Each 2264.71 9058.84

19 Installation, Testing and Commissioning of exhaust fan(upto 450mm sweep) in the existing opening, including making good the damage, connection, testing, commissioning etc. as required. 2.00 Each 467.23 934.46

20 Supplying and fixing of following ways surface/ recess mounting, vertical type, 415 V, TPN MCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200 A tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCBs (but without MCBs and incomer ) as required . (Note : Vertical type MCB TPDB is normally used where 3 phase outlets are required.) 0.00 0.00

22 Providing and fixing following rating and breaking capacity and pole MCCB with thermomagnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connections, Ics=100% Icu and Operational Voltage 690V etc. as required. 0.00 0.00

24 Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. 0.00 0.00

25 Single pole 10.00 Each 239.50 2395.00

26 Triple pole 2.00 Each 899.16 1798.32

27 Supplying and fixing single pole blanking plate in the existing MCB DB complete etc. as required. 12.00 Each 11.76 141.12

28 Supplying and fixing 30 A, 415 V, TPN Industrial type socket outlet, with 4 pole and earth, metal enclosed plug top alongwith 30 A "C" curve, TPMCB, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket out let and complete with connections, testing and commissioning etc. as required. 2.00 Each 3662.18 7324.36

29 Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of 4CX25Sqmm. size (clamped with 1mm thick saddle) on cable tray as required. 100.00 Meter 44.54 4454.00

30 Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of 3.5CX70Sqmm. size (clamped with 25x3mm MS flat clamp) on cable tray as required. 200.00 Meter 91.60 18320.00

31 Supplying and installing 100 mm width X 50 mm depth X 1.6 mm thickness size of perforated Hot Dipped Galvanised Iron cable tray (Galvanisation thickness not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with two numbers GI Suspenders i/c base of suitable size GI angle, GI bolts & nuts, fastner etc as required. 4.00 Meter 633.61 2534.44

32 Supplying and installing 300 mm width X 50 mm depth X 1.6 mm thickness size of perforated Hot Dipped Galvanised Iron cable tray (Galvanisation thickness not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with two numbers GI Suspenders i/c base of suitable size GI angle, GI bolts & nuts, fastner etc as required. 4.00 Meter 892.44 3569.76

33 Supplying and installing 100 mm width X 50 mm depth X 1.6 mm thickness size of perforated Hot Dipped Galvanised Iron cable tray "bends" (galvanisation not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with two numbers GI Suspenders i/c base of suitable size GI angle, GI bolts & nuts, fastner etc as required. 1.00 Each 1052.10 1052.10

34 Supplying and installing 300 mm width X 50 mm depth X 1.6 mm thickness size of perforated Hot Dipped Galvanised Iron cable tray "bends" (galvanisation not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with two numbers GI Suspenders i/c base of suitable size GI angle, GI bolts & nuts, fastner etc as required. 1.00 Each 1661.34 1661.34

35 Supplying and installing 100 mm width X 50 mm depth X 1.6 mm thickness size of perforated Hot Dipped Galvanised Iron cable tray "Tee"(galvanisation not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with two numbers GI Suspenders i/c base of suitable size GI angle, GI bolts & nuts, fastner etc as required. 1.00 Each 1199.16 1199.16

36 Supplying and installing 300 mm width X 50 mm depth X 1.6 mm thickness size of perforated Hot Dipped Galvanised Iron cable tray "Tee"(galvanisation not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with two numbers GI Suspenders i/c base of suitable size GI angle, GI bolts & nuts, fastner etc as required. 1.00 Each 1927.73 1927.73

37 Supplying and installing 100 mm width X 50 mm depth X 1.6 mm thickness size of perforated Hot Dipped Galvanised Iron cable tray "Cross member" (galvanisation not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with two numbers GI Suspenders i/c base of suitable size GI angle, GI bolts & nuts, fastner etc as required. 1.00 Each 1199.16 1199.16

38 Supplying and installing 300 mm width X 50 mm depth X 1.6 mm thickness size of perforated Hot Dipped Galvanised Iron cable tray "Cross member" (galvanisation not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with two numbers GI Suspenders i/c base of suitable size GI angle, GI bolts & nuts, fastner etc as required. 1.00 Each 2111.76 2111.76

39 Supplying and making end termination with brass compression gland and aluminium lugs for 4C X 25 sq. mm (28mm) size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required. 3.00 Each 313.45 940.35

40 Supplying and making end termination with brass compression gland and aluminium lugs for 3½C X 70 sq. mm (38mm)) size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required. 2.00 Each 455.46 910.92

41 Providing, laying and fixing 100 MM dia G.I. pipe (medium class) in ground complete with G.I. fittings including trenching (75 cm deep) and re-filling etc as required 10.00 Mtrs. 1611.76 16117.60

42 Earthing with G.I. earth pipe 4.5 Meter long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/ coke and salt as required. 2.00 Each 6435.29 12870.58

43 Providing and fixing 25 mm X 5 mm G.I. strip in 40 mm dia G.I. pipe from earth electrode including connection with G.I. nut, bolt, spring, washer excavation and re-filling etc. as required. 20.00 Mtrs. 634.45 12689.00

44 Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess for connections etc. as required. 20.00 Mtrs. 241.18 4823.60

45 Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing as required. 20.00 Mtrs. 70.59 1411.80

Total (Civil +Electrical) 2701315.69

Contractor shall quote only numerical value of percentage either Above or Below in highlighted Cell on Total Above % 0.00

Sub Total 2701315.69

Add BOCW @ 1% on sub total 27013.16

Add GST @18% on sub total 486236.82

Total Quoted value including GST @18% & BOCW @ 1% 3214566.00

Annexure-D (Para 4.6.4)

Abstract Estimate

Name of Work : Term contract for Civil Maintenance works in Township at HAL Korwa. 2023-24. (For One years)

Time Required for

(a) Conclusion of Contract - 03 months

(b) Completion of works- 12 months

Sl. No. Particulars Amount in Rs. Reference

1 Term contract for civil maintennace works in Township for repair and maintenance of buildings, water supply lines, sanitary fittings, approach roads, floors, pavings etc. and allied civil works required for completion of work.

(a) Civil Works (Paer: A+Part: B) #REF! [Annexure-D-1]

Grand Total #REF!

Say Rs. #REF! Lakhs

Manager (Works) ATA

HINDUSTAN AERONAUTICS LIMITED

AVIONICS DIVISION, KORWA

POST OFFICE: HAL, TEH: AMETHI

DISTT: AMETHI (UP) - 22 74 12

Comparative price statement( as per estimated rate)

Name of Work : Term contract for Civil Maintenance works in Township at HAL Korwa.

C. A. No- HAL/KWD/Civil / 02 of 2015-16

PART 'A' MES ITEMS

S. No. Description of work & Sections/ sub heads of MES SSR- 2010 Sections of MES SSR- 2010 As per Estimate M/s Satyam Traders (1/2) M/s Ramesh Traders (1/2) Freak Rate

Weightage with respect to value of work (Approx) Weightage with respect to value of work (Approx) Rate above or below or at Par w.r.t MES-SSR-2010 rates (+) or (-) Rate as per weightage Rate above or below or at Par w.r.t MES-SSR-2010 rates (+) or (-) Rate as per weightage Rate above or below or at Par w.r.t MES-SSR-2010 rates (+) or (-) Rate as per weightage

13 White washing, colour washing and distempering 15 2.00 0.02 166.94 3.3388 167 3.34 150 3.00 208.675 125.205 4.1735

16 Water supply, plumbing, Drains and Sanitary appliances. 18 8.00 0.08 176.69 14.1352 198 15.84 190 15.20 220.8625 132.5175 17.669

19 Fire Hydrant, Fire detection and alarm system, Fire hydrant and Sprinkler system. 27 1.00 0.01 166.94 1.6694 181 1.81 160 1.60 208.675 125.205 2.08675

Rebate offered (in %age) if any 2.00

Status of Parties L-2 L-1 9.380172329

Sr. Asstt-C Engineer (CIVIL) MGR. (WORKS)

D.P. Vishwakarma A.K.Bajpai Satyendra K Maurya

HINDUSTAN AERONAUTICS LIMITED

AVIONICS DIVISION, KORWA

POST OFFICE: HAL, TEH: AMETHI

DISTT: AMETHI (UP) - 22 74 12

SCHEDULE - 'A' Part 'B'

Comparative price statement( as per estimated rate)

Name of Work : Term contract for Civil Maintenance works in Township at HAL Korwa.

C. A. No- HAL/KWD/Civil/21 of 2013-14

PART 'B' NON MES ITEMS

S.N Description of Items Qty. Unit As per Estimate M/s Satyam Traders (1/2) M/s Ramesh Traders (2/2) Freak Rate

Rate in figure ( Rs.) Rate in words ( Rs.) Amount in ( Rs.) Rate (In Rs.) Amount Rate (In Rs.) Amount

1 Supply and stacking of coarse sand such as Banda/ Chopan including transportation, loading, unloading, cartage, wastage, labour, material, T&P etc and stacking in side at proper place all complete as per specification and direction of EIC. 65.00 Cum 1970.00 #NAME? 128050.00 2600.00 169000.00 2300.00 149500.00 - 2462.50 1477.50 56.62514156 70.76139258 65.34090909

2 Supply and stacking of Ist class bricks class 'A' at directed place inside Factory or Township area including all labour, material, transportation, loading, unloading, wastage , T&P etc and stacking in side at proper place all complete as per specification and direction of EIC. 2000.00 Nos 8.00 #NAME? 16000.00 7.50 15000.00 7.00 14000.00 - 10.00 6.00

3 Supply and stacking of 12.5 mm graded stone aggregate of bharatkoop/ Dala quarry including transportation, loading, unloading, cartage, wastage, labour, material, T&P etc and stacking in side at proper place all complete as per specification and direction of EIC. 10.00 Cum 2408.00 #NAME? 24080.00 2400.00 24000.00 2500.00 25000.00 - 3010.00 1806.00

Sr. Asstt-C Engineer (CIVIL) MGR. (WORKS)

D.P. Vishwakarma A.K.Bajpai Satyendra K Maurya

HINDUSTAN AERONAUTICS LIMITED

AVIONICS DIVISION, KORWA

POST OFFICE: HAL, TEH: AMETHI

DISTT: AMETHI (UP) - 22 74 12

Comparative price statement( as per estimated rate)

Name of Work : Term contract for Civil Maintenance works in Township at HAL Korwa.

C. A. No- HAL/KWD/Civil / 02 of 2015-16

PART 'A' MES ITEMS

S. No. Description of work & Sections/ sub heads of MES SSR- 2010 Sections of MES SSR- 2010 As per Estimate M/s Satyam Traders (1/2) M/s Ramesh Traders (1/2) Freak Rate

Weightage with respect to value of work (Approx) Weightage with respect to value of work (Approx) Rate above or below or at Par w.r.t MES-SSR-2010 rates (+) or (-) Rate as per weightage Rate above or below or at Par w.r.t MES-SSR-2010 rates (+) or (-) Rate as per weightage Rate above or below or at Par w.r.t MES-SSR-2010 rates (+) or (-) Rate as per weightage

13 White washing, colour washing and distempering 15 2.00 0.02 154 3.08 167 3.34 165 3.30 192.5 115.5 3.85

16 Water supply, plumbing, Drains and Sanitary appliances. 18 8.00 0.08 163 13.04 198 15.84 200 16.00 203.75 122.25 16.3

19 Fire Hydrant, Fire detection and alarm system, Fire hydrant and Sprinkler system. 27 1.00 0.01 154 1.54 181 1.81 180 0.00 192.5 115.5 1.925

Rebate offered (in %age) if any 2.00

Total Amount (Part-B) 168130.00 208000.00 188500.00

Total Amount (Part A+Part B) 0.00 1268130.00 1557858.16 1373606.38

Status of Parties L-2 L-1

Sr. Asstt-C Engineer (CIVIL) MGR. (WORKS)

D.P. Vishwakarma A.K.Bajpai Satyendra K Maurya