REPAIR REPLACEMENT OF LT UG CABLE, LT PANELS, STREET LIGHT, STREET LIGHT TIMERS, OUTDOOR LIGHTING ALONG WITH CONNECTED ACCESSORIES FOR FORT AREA NAGPUR UNDER GE KAMPTEE.

Amount

Excavation in trenches not exceeding 1.5 Mtr wide and not exceeding 1.5 Mtr deep in soft/loose soil and getting out for taking down/laying Pipe lines of any description and in any position including forming sides and bottom surface to required level/ gradients complete all as specified and directed.

Returning, filling in, excavated soil including spreading, levelling, watering and well ramming in layers not exceeding 25 cm thick complete all as specified and directed.

Removing of surplus soil to a distance not exceeding 50M and depositing where directed at a level not exceeding 1.5 M above the starting point complete all as specified and directed.

Supply and laying in replacement XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 10 Sqmm 4 Core in trench/floor/on pole/wall including taking down old unsv cable complete all as specified and directed. (Cable Make:- Polycab, KEI, Havells)

Supply and laying in replacement XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 25 Sqmm 4 Core in trench/floor/on pole/wall including taking down old unsv cable complete all as specified and directed. (Cable Make:- Polycab, KEI, Havells)

Supply and laying in replacement XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 70 Sqmm 3.5 Core in trench/floor/on pole/wall including taking down old unsv cable complete all as specified and directed. (Cable Make:- Polycab, KEI, Havells)

Supply and laying in replacement XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 240 Sqmm 3.5 Core in trench/floor/on pole/wall including taking down old unsv cable complete all as specified and directed. (Cable Make:- Polycab, KEI, Havells)

Supply and fix Double wall Corrugated High Density Polymer Ethyl (HDPE) pipe For laying of Electric cable of size 50mm outer diameter and 38 mm inner Diameter with IS 14930 (part 2):2001 laid in trenches,wall,floor,pole including bends, sockets and other connected accessories complete all as specified and directed. MAKE :-Tirapati / KETRON

Supply and fix Double wall Corrugated High Density Polymer Ethyl (HDPE) pipe For laying of Electric cable of size 110 mm outer diameter and 75 mm inner Diameter with IS 14930 (part 2):2001 laid in trenches,wall,floor,pole including bends, sockets and other connected accessories complete all as specified and directed. MAKE :-Tirapati / KETRON

Supply and fixing in repair MCCB 400 Amps with sheet metal enclosure, MCCB ,4 Pole, 50Hz , Icu= 36 KA at 415 volts, with thermal magnetic release & Ics=100% Icu with adjustable over load setting (minimum 80% to 100%) complete all as specified and directed. MAKE :- Havels / L&T / Legarand

Supply and fixing in repair MCCB 250 Amps with sheet metal enclosure, MCCB ,4 Pole, 50Hz , Icu= 36 KA at 415 volts, with thermal magnetic release & Ics=100% Icu with adjustable over load setting (minimum 80% to 100%) complete all as specified and directed. MAKE :- Havels / L&T / Legarand

Supply and fixing in repair MCCB 200 Amps with sheet metal enclosure, MCCB ,4 Pole, 50Hz , Icu= 36 KA at 415 volts, with thermal magnetic release & Ics=100% Icu with adjustable over load setting (minimum 80% to 100%) complete all as specified and directed. MAKE :- Havels / L&T / Legarand

Supply and fixing in repair MCCB 160 Amps with sheet metal enclosure, MCCB ,4 Pole, 50Hz , Icu= 25 KA at 415 volts, with thermal magnetic release & Ics=100% Icu with adjustable over load setting (minimum 80% to 100%) complete all as specified and directed. MAKE :- Havels / L&T / Legarand

Supply and fixing in repair MCCB 100 Amps with sheet metal enclosure, MCCB ,4 Pole, 50Hz , Icu= 16 KA at 415 volts, with thermal magnetic release & Ics=100% Icu with adjustable over load setting (minimum 80% to 100%) complete all as specified and directed. MAKE :- Havels / L&T / Legarand

Supply and fixing in repair MCCB 63 Amps with sheet metal enclosure, MCCB ,3 Pole, 50Hz , Icu= 16 KA at 415 volts, with thermal magnetic release & Ics=100% Icu with adjustable over load setting (minimum 80% to 100%) complete all as specified and directed. MAKE :- Havels / L&T / Legarand

M &L for painting with one coat of superior quality aluminum paint on exposed surface of poles and street light bracket mounted on the poles,junction box etc and making black strip upto1.5 Mtr height from ground level and writing pole Nos etc. written on it with black synthetic enamel paint including removing of old paint by removers scrubing from LT steel poles 9 meter long, cross arms clamps etc for painting compete all as specified and directed.

M &L for writing pole Nos on stree light poles, written on yellow oval shaped it with black synthetic enamel paint compete all as specified and directed.

Supply & fixing in replacement Outdoor type cubicle Bus Bar aluminium Chamber 400 Amps for three phases, 4 wire , CPRI approved IP-65 protection rupturing capacity at 415 volts , factory made having powder coating including earth work, necessary angle iron and PCC foundation required of size, complete all as specified and directed

Supply & fixing in replacement post top lantern LED type 40 watt 230 watt volts AC outdoor type with decorative post top for 360 degree indirect light IP 65 protection with impact and corrosion resistant complete with driver and lamp compete all as specified and directed. MAKE :- Havels / Polycab / Bajaj

S&F in replacement PVC insulated 6 Sqmm, three core flat, copper conductor cable, 1100 wates grade for submerceble pumping set etc, complete all as specified and as directed.

M&L for outdoor type cubical panel board made out of 3.15 mm thick CRCA sheet for outer shell and made out of 2 mm thick CRCA sheet for inner shell and MS angle frame 50X50X6 mm, CPRI approved, fabricated double door including CT and PT of suitable rating with internal connection in aluminium strip of suitable rating both side openable suitable for 3 phase 415 V, powder coated 90 microns, comprising of following :- (a) TPN 04 nos aluminium busbar in equal size 3 phase and neutral 1000 amp rating duly insulated fitted on heat shrinkable insulation and covered with colour sleeve. (b) Incoming MCCB 630 Amp, 36 KA 415V, FP adjustable thermal & Fixed Magnetic 100 % - 01 Nos. (c) Outgoing MCCB 320 Amp 25 KA 415 V TP - 01 Nos (d) Outgoing MCCB 100 Amp 25 KA 415 V TP - 02 Nos (e) Outgoing MCCB 63 Amp 25 KA 415 V TP - 03 Nos (f) Multifunction meter for measure,current of Amp, Voltage and Frequency. (g) LED Indicator lamp - 01 (Set of Three).

M&L for outdoor type cubical panel board made out of 3.15 mm thick CRCA sheet for outer shell and made out of 2 mm thick CRCA sheet for inner shell and MS angle frame 50X50X6 mm CPRI approved fabricated double door including CT and PT of suitable rating with internal connection in aluminium strip of suitable rating both side openable suitable for 3 phase 415 V powder coated 90 microns comprising of following :- (a) TPN 04 nos aluminium busbar in equal size 3 phase and neutral 600 amp rating duly insulated fitted on heat shrinkable insulation and covered with colour sleeve. (b) Incoming MCCB 400 Amp, 36 KA 415V, FP adjustable thermal & Fixed Magnetic 100 % - 01 Nos. (c) Outgoing MCCB 125 Amp 25 KA 415 V TP - 01 Nos (d) Outgoing MCCB 100 Amp 25 KA 415 V TP - 01 Nos (e) Outgoing MCCB 63 Amp 25 KA 415 V TP - 05 Nos (f) MCB TPN 32 Amp, 10 KA - 01 No (f) Multifunction meter for measure,current of Amp, Voltage and Frequency. (g) LED Indicator lamp - 01 (Set of Three).

Materials and labour as in replacement for earthing complete with galvanized earth plate electrode 600 x 600 x6mm thick burried directly in ground vertically to a depth not less than 2.25 M below normal ground level ) with top edge of the plate not less than 1.50 M below normal ground level , connected to and including galvanized Iron Strip 32x6mm as earth lead, soldered and riveted to earth plate by means of nuts, bolts, check nuts & washers, of galvanized iron or steel with connected to test point and testing on completion including 40mm GI light grade pipe for earth lead protection from earth point to earth plate, including provn of adequate quantity of charcoal dust mixed with 35 % common salt to a packed thickness of not less than 32 cm in alternate layers of charcoal and salt on all sides of earth plate with 20mm bore medium grade GI Pipe for watering,GI check nut, funnel and wire mesh with and including all necessary excavation & earth work in soft/loose soil, returning filling in, removal of surplus soil to a distance 50 metre,,PCC 1:3:6 type C-1 as in earth pit, 40 mm thick RCC cover using cement concrete 1:2:4 type B-1 reinforced with & including 8 mm dia mild steel TMT bar @ 100 mm c/c Both way with suitable handle for lifting arrangement & including form work complete all as specified and shown in electrical plate No 3 of MES SSR Part I 2009 and as directed. NOTES:- (i) On testing, after completion of Job, if desired earth resistance is not obtained, the earthing shall be redone at without any extra cost by contractor.

Supply and laying in replacement of GI tube medium grade 40mm size as in cable protection pipe including all fittings, including FI clamp for fixing complete all as specified and directed.

Supply & fixing , Rigid non-metallic PVC conduit of size 20mm exclusive of boxes (junction/terminal) but inclusive of all tees, bends, elbows, reducers, bell mouth tube ends andfixing accessories such as couplers, lock nuts, saddles, pipe hooks etc complete all as specified and as directed.

Supply and fixing in replacement of MCCB sheet metal Enclosure for upto 250 Amps. complete all as specified and as directed.

Supply and fixing in repairs thermoplastic cable entry junction boxes of size 250 x 220 x 135 mm and IP-65 protection level with metric knock out fixed on poles with MS clamps, nuts, bolts and washers including MCB SPN, 5-32 amps, 'C' series, breaking capacity 10 KA, 'C' curve 240 volts, 50Hz including necessary incoming and outgoing electric connection with suitable size of copper lugs etc., separate (detachable) gland plate, bakelite connector 4 way 20 amp, dust and vermin proof, front door opening with hinges and locking arrangement, complete all as specified and as directed. MAKE :- Sintex / Hansal / Nepture

Supply and fix street light timer switch with voltage mounting device enclosed in SMC Enclosure for automatic and manual switching of street light based on LUX level of natural light , The sensor along with suitable power contactor MCB support terminal shell be housed in enclosure complete made out of anti rust/ shock proof/ termite proof/ confirming to IP 54 suitable for 5-8 KW (40 Amp) load compete all as specified and directed Make of switch: Timer Nature switch model No Swadeep-02EC-k5w1P-VMS/ or equivalent in L&T/Siemens/Schneider

Supply and fixing of smart integrated Smart Bright, All in one Solar Street Light with Infra Red Remote 24 Watt with built in mono crystalline panel, Lithium ferro phospate (Lite PO 4) Battery , MPPT charge controller and PIR sensor with colour teperature 6000-6500 K complete all as specified and directed.

Supply and fixing in replacement of Galvanized octagonal decorative poles (8.0 meter long) complete with base plate and finial taper plug, nuts and bolts including foundation and coping complete all as specified and directed.

Supply and fixing in replacement new generation, energy saving and environmental friendly long life LED Flood light fitting made up of pressure die-cast aluminium housing with high power LEDs as lightighting source and lens embedded,electronic driver type 120 watt LED , IP 66 complete all as specified and directed.

Supply & Fixing in replacement LED fittings IP65 rated LED Bollard with soft 360 deg light distribution 8/9W, 230V, 50Hz complete on suitable PCC 1:2:4 alongwith suitable connectors to connect with 10sqmm X 4 core cable having protection from water and soil complete all as specified and directed.

Supply and fixing in replacement GALAKTIC SMART STRIP LIGHT - (RGB) 3000 K IP65 5 Mtr), High brightness IP65 LED strips with uniformity of light required for perfect outdoor application Complete all as specified and directed.

Supply and fixing in replacement Flexion AC LED strip Rope 144D Strip 3000 K, IP65, 50 Mtr (Warm White), High brightness IP65 LED strips with uniformity of light required for perfect outdoor application Complete all as specified and directed.

Supply and fixing in replacement BRILLANTE LINEAR WALL WASHER 6H, 7 W, 3000 K, Crafted from Aluminum Die Cast with Bi-Directional Beam. Its integrated LED ensures long-lasting and energy-efficient with IP65 protection complete all as specified and as directed.

Supply and fix in repair Heat shrinkable straight through cable jointing kit for 1100 Volts grade cable joint complete with jointing material and accessories suitable for 3.5 core XLPE armoured aluminium conductor cable of size 150 to 240 Sq mm complete all as specified and as directed. Note :- Any Excavation and earth work , Returning and filling, Removing involved shall be measured and paid separately.

All as per item No. 36 above but cable size 95- 120 sq mm cable size complete all as specified and directed

All as per item No. 36 above but cable size 25 - 50 sq mm cable size complete all as specified and directed

Supply and fixing in repair retro reflective boards in shape of rectangle of size 1.0 m x1.4 m made out of 2 mm thick stainless steel both side bounded/pasted with high prismatic (iv) sheet mannufactured by avery dennison or 3M with desired letters/logos designed as directed the board shall be supplied with and including stainless steel frame made out of 25 mm dia pipe in frame around duly welded with and including stainless steel sheet and stainless steel posts of 38 mm dia and full length of 2.20 m one side and 2.8 m other side complete all as specified and directed. ( Note :(i) Rate for fixing of boards with PCC 1:2:4 type B2 filling of size 45x45x60 cm to be incl in unit rate. (ii) The board should be written description as per direction given by Engineer-in-Charge)

Material and labour for PCC 1:3:6, Type C2 by using ( 40 mm aggregatestone aggregate) in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets andrailings upto 60 cm in height, copings, complete all as specified and directed.

Material and labour for PCC 1:2:4 Type B1 by using ( 20 mm stone aggregate) in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets andrailings upto 60 cm in height, copings, complete all as specified and directed.

Supply and fixing 1100 Volts grade Copper conductor, PVC insulated, 1.5 sqmm 3 core round sheathed (flexible), industrial cable, complete all as specified and directed.

Supply and fixing in repair LED driver for 45-70W LED street light fittings complete all as specified and as directed.

NOTE:- SCHEDULE OF CREDIT (Amount shall be deducted offline from the total quoted amount to workout the net contract sum to be considered for acceptance.) [(-) Rs. 50,450.00]

M/S. ELECTROPOWER TECHNOLOGIES

SONA LAKSHMI ASSOCIATE

Chinmaya Enteprises

SHREE MAHALAXMI POWER

Bidder Name

Paragon Electrotechnics

Chinmaya Enteprises

M/S. ELECTROPOWER TECHNOLOGIES

SHREE MAHALAXMI POWER

SONA LAKSHMI ASSOCIATE