Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L 1₹19.6 LAccepted-AOC NO 52 KOIL MANYAM STREET DHARMAPURI PUDUCHERRY 605 009 | PUDUCHERRY | PUDUCHERRY | PUDUCHERRY | 605009 | L 1 | Accepted-AOC As per the chart generated L1 is accepted and AOC issued to L 1 | |
| 2 | L 2₹21.2 L+₹1.6 L (8.21%)Rejected-Finance NO 14 BLOCK L 2B MOHAN GARDEN UTTAM NAGAR NEW DELHI 110 059 | WEST DELHI | DELHI | 110059 | L 2 | Rejected-Finance Second Least | |
| 3 | L 3₹22.1 L+₹2.5 L (12.6%)Rejected-Finance | L 3 | Rejected-Finance Third Least |
Tender Value
₹20.3 L
EMD Value
₹40,695
Closing Date
26 Sept 2022, 4:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
The, Executive Engineer, SBDI, PWD, Puducherry.
Office of the EE,SBDI,PWD,Puducherry.
Improvements and upgradation of Room Nos. 106, 206 and 306 of PGGH, New Delhi
2022_PWDC1_11066_1
18/SBDI/2022-23
Open Tender
Civil Works
Item Rate
90 days
Puducherry
Please refer Tender documents.
2 documents required · 2 mandatory
₹525
₹40,695
29 Oct 2022
16 Sept 2022
27 Sept 2022
16 Sept 2022
26 Sept 2022
16 Sept 2022
90 days
Amount
Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size).
Centering and shuttering including strutting, propping etc. and removal of form for Lintels, beams, plinth beams, girders, bressumers and cantilevers
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level - Thermo-Mechanically Treated bars of grade Fe-500D or more.
Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in cement mortar 1:6 (1 cement : 6 coarse sand)
Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in- Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.
Providing & Fixing decorative high pressure laminated sheet of plain / wood grain in gloss / matt / suede finish with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS : 2046 Type S, including cost of adhesive of approved quality. 1.5 mm thick
Providing and fixing factory made uPVC white colour sliding glazed window upto 1.50 m in height dimension comprising of uPVC multi-chambered frame with in-built roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes, wire mesh and silicon sealent shall be paid separately). Note: For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. Three track three panels sliding window with fly proof SS wire mesh (Two nos. glazed & one no. wire mesh panels) made of (small series) frame 92 x 44 mm & sash 32 x 60 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension (Area of window upto 1.75 sqm).
Providing & fixing fly proof wire gauze to windows, clerestory windows & doors with M.S. Flat 15x3 mm and nuts & bolts complete. Stainless steel (grade 304) wire gauze of 0.5 mm dia wire and 1.4 mm aperture on both sides.
Providing & fixing glass panes with putty and glazing clips in steel doors, windows, clerestory windows, all complete with : 5.5 mm thick glass panes.
Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete. Size of Tile 600x600 mm.
Providing 10 mm thick plaster of Paris (gypsum anhydrous) ceiling up to a height of 5 m above floor level, over first class kail wood strips 25x6 mm with 10 mm gap in between and reinforced with rabbit wire mesh fixed to wooden frame (frame work to be paid separately): Curved surfaces.
Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. 75mm diameter.
Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. 110mm diameter.
Providing and fixing on wall face unplasticised - PVC moulded fittings/accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion.Single Tee without Door size 75x75x75 mm.
Providing and fixing on wall face unplasticised - PVC moulded fittings/accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion.Single Tee without Door size 110x110x110 mm.
Providing and fixing on wall face unplasticised - PVC moulded fittings/accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion.Bend 87.5° 75 mm bend.
Providing and fixing on wall face unplasticised - PVC moulded fittings/accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion.Bend 87.5° 110 mm bend.
12 mm cement plaster of mix 1:6 (1 cement: 6 fine sand)
20 mm cement plaster of mix 1:6 (1 cement: 6 fine sand)
Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface : Water thinnable cement primer.
Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications : Two or more coats applied on walls @ 1.25 ltr/10 sqm over and including one coat of Special primer applied @ 0.75 ltr /10 sqm.
Providing and applying white cement based putty of average thickness 1mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.
French spirit polishing : One or more coats on old work.
Providing and fixing double scaffolding system (cup lock type) on the exterior side, up to seven story height made with 40 mm dia M.S. tube 1.5 m centre to centre, horizontal & vertical tubes joining with cup & lock system with M.S. tubes, M.S. tube challies, M.S. clamps and M.S. staircase system in the scaffolding for working platform etc. and maintaining it in a serviceable condition for the required duration as approved and removing it there after .The scaffolding system shall be stiffened with bracings, runners, connection with the building etc wherever required for inspection of work at required locations with essential safety features for the workmen etc. complete as per directions and approval of Engineer-in-charge .The elevational area of the scaffolding shall be measured for payment purpose .The payment will be made once irrespective of duration of scaffolding. Note: - This item to be used for maintenance work judicially, necessary deduction for scaffolding in the existing item to be done.
Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer - in- charge.
Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge. In cement mortar.
Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead : Of area 3 sq. metres and below.
Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead. For thickness of tiles 10 mm to 25 mm.
Dismantling of flushing cistern of all types (C.I./PVC/Vitrious China) including stacking of useful materials near the site and disposal of unserviceable materials within 50 metres lead.
Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.
Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing: Rectangular shape 1500x450mm
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. 20 mm nominal outer dia Pipes.
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. 32 mm nominal outer dia Pipes.
Providing & fixing in position Phenol bonded Bamboowood flooring with planks of sizes 14mm thick, 1800mm length (minimum) and 130 mm wide(minimum), in approved colour, texture and finish, having Performance Appraisal Certificate (PAC) issued by Building Materials & Technology Promotion Council (BMTPC). The flooring shall be fixed with tongue and groove interlocking system, with underlayment of 4mm thick expanded polyethylene foam sheets having density 40kg/cum, over prepared surface with necessary quarter round planks of size 1900mm x 18mm and door reducer of size 1900mm x 44mm, wherever required. The bamboowood planks shall have minimum density of 1000 Kg/cum & minimum Hardness 1000 Kgf. with Eco friendly UV coating, all complete as per direction of the Engineer in-charge.
Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed steel conduit as required. 2 X 4 sq. mm + 1 X 4 sq. mm earth wire.
Wiring for light point/ fan point/ exaust fan point/call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required - Group 'A'
Wiring for light point/ fan point/ exaust fan point/call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit with modular switch, odular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required - Group 'B'
Wiring for twin control light point with 1.5 sqmm FRLS PVC insulated copper conductor single core cable in surface/ recessed medium class pvc conduit, 2 way modular switch, modular plate, suitable GI box and earthing the point with 1.5 sqmm FRLS PVC insulated copper conducter single core cable etc. required.
Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel / PVC conduit as required. 4 x 1.5 Sq.mm
Supplying and drawing following pair 0.5 mm dia FRLS PVC insulated annealed copper conductor, unarmoured telephone cable in the existing surface/ recessed steel/ PVC conduit as required. 2 Pair
Supplying and fixing metal box of following sizes (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including painting etc, as required. 100 mm X 100 mm X 60 mm deep.
Installation of exhaust fan in the existing opening, including making good the damage, connection, testing, commissioning etc, as required - Upto 450 mm sweep.
Supplying and fixing 20 amps, 240 volts SPN industrial type socket outlet with 2 pole and earth metal enclosed plug top along with 20amps 'c' curve SP, MCB, in sheet steel enclosure on surface or in recess, with chained metal cover for the socket outlet and complete with connections , testing and commissioning etc., as required
Supplying and fixing call bell/ buzzer suitable for single phase, 230 volts, complete as required.
Disposal of moorum/ building rubbish/ malba/ similar unserviceable, dismantled or waste material by mechanical transport including loading, transporting, unloading to approved municipal dumping ground for lead upto 40 km for all lifts, complete as per directions of Engineer-in-charge.
Lock: Providing and fixing Stainless steel 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete.
EWC: Providing and fixing vitreous china water wall mounted closet(European type 35x57cm) with seat , fittings & CI brackets 40 mm flush bend, with special of standard make including painting of fittings and brackets, cutting and making good the walls wherever required: WC with ISI marked solid plastic seat and lid. Make Jaquar model no: ARS-WHT-0110
Health faucet: Providing and fixing CP Health Faucet with 8mm dia. 1 meter Long Flexible tube & Wall Hook. Jaguar model no:ALD-573
Wash Basin: Providing and fixing wash basin of Standard pattern including cutting and making good the walls wherever required: Make Hindware pastel model no:91059
Wall mixer: Providing and fixing concealed body for single lever High Flow Diverter with Button Assembly, Cartridge sleeve but without Exposed Part complete including cutting and making good the walls wherever required. Jaguar model no:ALD-079.
Basin mixer: Providing and fixing basin mixer complete including cutting and making good the walls wherever required. Jaguar model no:LYR38001B
Angle valve: Providing and fixing 15 mm CP brass angle valve with nuts, washer with flange complete including cutting and making good the walls, wherever required. Jaguar model no: FUS 29053 (excluding connection hose).
Paper holder: Providing and fixing toilet roll Holder with flap complete including cutting and making good the walls wherever required. Jaguar model no:AKP 35753P
Shower: Providing and fixing CP Over head Shower 100mm dia. round shape single flow with Grey Face Plate with Rubit Cleaning system. Jaguar model no:OHS-1989
Shower arm: Providing and fixing CP Shower Arm casted 190mm long Light Body round shape for wall Mounted shower with flange. Jaguar model no:SHA-447
Towel ring: Providing and fixing CP brass Towel ring 300mm long fixed to wooden cleats with CP brass screws including cutting and making good the walls wherever required. Jaguar model no:ACN 1101N
Coat hook: Providing and fixing CP Cast brass twin coathook fixed to wooden cleats with CP brass screws including cutting and making good the walls wherever required. Jaguar model no:ACN 1161N
Soap holder dish: Providing and fixing Soap Dish holder complete including cutting and making good the walls wherever required. Jaguar model no:AKP 35731P
Bottle trap: Providing and fixing Bottle trap (with internal partition) 32mm size with 300mm x 190mm long wall connection pipes & wall flang complete including cutting and making good the walls wherever required. Jaguar model no:ALD-769L
Connection hose: Providing and fixing connection hose 450mm long braided hose with two 15mm nuts & rubber washers without nipple. Jaguar model no:ALD-805B
Waste coupling: Providing and fixing click clack waste 32mm size Half thread with 80mm height (Waste coupling) complete including cutting and making good the walls wherever required. Jaguar model no: ALD-729
Towel rail: Providing and fixing CP brass Towel ring 300mm long fixed to wooden cleats with CP brass screw including cutting and making good the walls wherever required. Jaguar model no:CAN 1101N or equivalent.
Flush valve: Providing and fixing metropole flush valve Dual Flow 32mm size (concealed Body) with concealed shut off provision & Rectangular Dual Flush plate, ABS chrome plated (3.0/6.0 Lts. Per Flushing) Jaquar Model No: FLV-1085DFP.
Exposed part for wall mixer: Providing and fixing CP single lever Exposed parts Kit of High Flow Diverter consisting of Operating Lever, Wall Flange (with seals) & Button Only (suitable for item ALD-079) complete including cutting and making good the walls wherever required. Jaguar model no:LYR-38079K
Towel rack: Providing and fixing Towel rack with lower hanger (stainless steel) fixed to wooden cleats with CP brass screws including cutting and making good the walls wherever required. Jaquar model No; AHS1581
Office Table: Supply and placing 18mm thick teak class I wood block board office table size 900x600x750mm with drawer and 6mm thick glass top including spirit polishing with melamine finish complete.
Study chair: Providing and arranging in position study chair of over all size 470x490x1000mm made by Burma teak wood consist of (2 Nos) front corner vertical supports of size 415x50x50mm, (2 nos) rear corner vertical supports of size 850x70x38mm which is connected at top by semicircular frame of size 600x75x38mm. These four legs are connected at seat level by 4 nos of wooden frame of size 380x78x30mm which is connected to rear frame by 2 nos of wooden arms of size 420x40x30mm and four legs are connected at bottom with three nos of reeper of size 380x25x25mm with melamine finished including 100mm thick 40 density cushion and 25mm foam rubber.
Double cot bed: Providing and placing in position a wooden double bed (box type) of overall size 2000x1860x380mm, box inner size of 1900x1800x300mm made of water proof commercial BWR type plywood 20mm thick, box divided into two portions with center plywood partition and the top board at bed level is openable which is supported by 3 nos of teak wooden frame of size 1800x50x40mm and the whole box is rested on the wooden frame of size 1800x50x40mm attached with the head and leg board . Head board of size 1860x1070x50mm and Leg board of size 1860x380x50mm, made of tead wood class -I, antique design with grooves on both side with golden paint over wooden lipings.
Bed side Table: Providing and arranging in position Bed side table of over all size 400x440x470mm made of Burma teak wood having 2 nos of drawers, inner size of 340x320x150mm, antique design with grooves and golden paint over wooden lipings, including all hardware fitting with sliding tray chennel and top closed with wooden board covered alround by teak wood lipping of size (1No) 440x40x10mm ,(2 Nos) 400x40x10mm with toughned black glass of size 385x42x6mm with melamine finished.
Mattress: Providing and arranging mattress of overall size 1800x1900x125mm with offwhite Design cover.
LCD paneling: Providing and fixing LCD paneling on wall, on GI hat furring channel 22-25 mm depth with grid size 600 X 600mm both ways fixed to wall, columns in any profiles and covered with 8mm plywood of approved make and finished with veneer duly polished as approved on exposed faces with grooves as per design. The rates shall include all hardware, fittings, adhesives, beadings, lippings, etc. as directed.
Providing and fixing wooden ward rope/cub board made with 19mm water proof ply board BWR with both side laminated inner & outer side 1 mm thick sheet as per approved design by Engineer-in-charge includes S.S. Hardware fittings like hinges,handles, magnet catcher, lock etc. all complete size 7'X3'X2' depth.
Supply and assembling, installation, testing & commissioning of following type of light fixtures and fans. (d) Providing 225mm dia, 900 rpm single phase exhaust fan with louver shutters etc., as required. Model: Havells Birdie HS.
Providing and fixing telephone socket on the existing wall.
Providing and fixing 600mm LED tube light of 20w capacity 600mm length.
Providing and fixing Television socket on the existing wall.
Providing and fixing ceiling fan of approved make with 1200mm, including wiring the down rod of standard length (upto 30cm ) with 1.5sqmm FRLS PVC copper conductor, single core cable as required. (make : Crompton Greaves)
Providing and fixing 1200mm LED tube light of 20w capacity.
Removing of split A.C. indoor unit before commencement of civil work and refixing after completion of civil work including cutting of copper pipe, drain drain pipe, wiring and joining the same, as per instruction of Engineer-in-charge
Supplying stiching and fixing of window curtain cloth for the glazed windows of size 1.80m length and 1.2m height by providing 25mm dia. Stainless steel curtain pipe of length 2.4 mts., and tie the curtain pipe with 3 nos. of stainless steel brackets and 2 nos. of decorative side holdings. The curtain cloth of 10 mts will be provided to the window from top of the window to the floor level i.e., 2.1 mts. height. The curtain cloth will be made of polyster cotton biscos and jute texture in the ratio as per the manufacturers specifications as per the direction of the Engineer-In -Charge.
SANTOSH KUMAR PANDEY
ANWAR HUSSAIN
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .