Repair to plumbing, sunken floor, sanitary items and cleaning of over head tanks in Md/OTM accn under AGE B/R Aurangabad at GE (S) Ahmednagar

Amount

Excavation in trenches n.exc 1.5m wide and n.exc 1.5m in depth in hard/dense soil for foundation etc complete all as specified and directed.

Returning, filling including spreading, levelling watering and well ramming in layers not exc 25cm as in soil complete all as specified and directed.

Removing excavated material (soil) to a distance n.exc 50 m and depositing where directed at a level n exc 1.5m above the starting point complete all as specified and directed.

Moorum filling in floors or pavings, laid in layers n exc 15 cm thick, spread, levelled and rammed including watering complete all as specified and directed.

Hardcore of gauge exc 63mm but n exc 100mm, deposited, spread and levelled in layers n exc 15 cm thick, watered and rolled / rammed to a true surface complete all as specified and directed.

Disconnecting existing tanks, exc 250 Ltrs but not exc 500 Ltrs capacity, setting a side (or lowering if required) for repairs, cleaning etc and hoisting if required reconnecting and re-fixng in position including cleaning and removing all scales and dirt etc from mouths circulating pipe etc complete all as specified and directed.

Disconnecting existing tanks, but exc 500 Ltrs not exceeding 1000 Ltrs capacity, setting a side (or lowering if required) for repairs, cleaning etc and hoisting if required reconnecting and re-fixng in position including cleaning and removing all scales and dirt etc from mouths circulating pipe etc complete all as specified and directed.

Disconnecting existing tanks, but exc 1000 Ltrs not exceeding 2000 Ltrs capacity, setting a side (or lowering if required) for repairs, cleaning etc and hoisting if required reconnecting and re-fixng in position including cleaning and removing all scales and dirt etc from mouths circulating pipe etc complete all as specified and directed.

Polythene water tank cover including lid and locking arrangement for any capacity of rotational moulded PVC tanks including fixing with necessary device complete all as specified and directed.

Rotational moulded polytethne storage tanks of 500 ltrs capacity (cylinderical vertical with closed top) hoisted and fixed in repairs in position ISI Marked complete all as specified and directed.in SSR Part- I.

Rotational moulded polytethne storage tanks of 1000 ltrs capacity. (cylinderical vertical with closed top) hoisted and fixed in repairs in position ISI Marked complete all as specified and directed in SSR Part- I.

Rotational moulded polytethne storage tanks of 2000 Ltrs Capacity. (cylinderical vertical with closed top) hoisted and fixed in repairs in position ISI Marked complete all as specified and directed in SSR Part- I.

Ball valves high pressure of 15mm bore of pipe.PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed in repairs, (minimum weight 142 gms) complete all as specified and directed. Make :- Prayag or Symet.

Ball valves high pressure of 20 mm bore of pipe.PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed in repairs, (minimum weight for 210 gm) complete all as specified and directed. Make :- Prayag or Symet

Ball valves high pressure of 25 mm bore of pipe PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed in repairs, (minimum weight for 455 gm) complete all as specified and directed. Make Prayag or Symet.

Gun metal globe or gate valves 15 mm bore with iron wheel head, screwed both ends for iron pipe, fixed in repairs complete all as specified and diercted.

Gun metal globe or gate valves 20 mm bore with iron wheel head, screwed both ends for iron pipe,fixed in repairs complete all as specified and directed.

Stop valves 15 mm bore, cast copper alloy, chromium plated, screwed both ends for iron pipe, fixed in repairs complete all as specified and diercted.

Stop valves, fancy type, 15 mm bore , chromium plated cast copper alloy, screwed both ends for iron pipe,fixed in repairs complete all as specified and directed.

Stop valves cast copper alloy 20 mm bore, screwed both ends for iron pipe,fixed in repairs complete all as specified and directed.

Stop valves, fancy type, 20 mm bore , chromium plated cast copper alloy, screwed both ends for iron pipe,fixed in repairs complete all as specified and directed.

Taking up or down GI steel tubing and connections including cleaning for re-fixing or removal of 15 mm bore pipe complete all as specified and directed.

Taking up or down GI steel tubing and connections including cleaning for re-fixing or removal of 20 mm bore pipe complete all as specified and directed.

Taking up or down GI steel tubing and connections including cleaning for re-fixing or removal of 25 mm bore pipe complete all as specified and directed.

GI steel tubing medium grade with all fittings and fixed complete to walls or laid in floors ISI marked of 15 mm bore pipe complete all as specified and directed.

GI steel tubing medium grade with all fittings and fixed complete to walls or laid in floors ISI marked of 20 mm bore pipe complete all as specified and directed.

GI steel tubing medium grade with all fittings and fixed complete to walls or laid in floors ISI marked of 25 mm bore pipe complete all as specified and directed.

Refixing old GI steel tubing and connections in new or old position walls, ceiling, floors etc of 15mm bore pipe complete all as specified and directed.

Refixing old GI steel tubing and connections in new or old position walls, ceiling, floors etc of 20 mm bore pipe complete all as specified and directed.

Refixing old GI steel tubing and connections in new or old position walls, ceiling, floors etc of 25 mm bore pipe complete all as specified and directed

Supplying and laying of CPVC pipes 16mm outer dia of SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and directed.

Supplying and laying of CPVC pipes 20 mm outer dia of SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and directed.

Supplying and laying of CPVC pipes 25 mm outer dia of SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified. all as specified

Brass elbow of 16 mm external dia fixed in repairs, complete all as specified and directed.

Brass elbow of 20 mm external dia fixed in repairs, complete all as specified and directed.

Male brass threaded adaptor (MTA/MBTA) ) of 16 mm external dia fixed in repairs, complete all as specified and directed.

Male brass threaded adaptor (MTA/MBTA) ) of 20 mm external dia fixed in repairs, complete all as specified and directed.

Male brass threaded adaptor (MTA/MBTA) ) of 25 mm external dia fixed in repairs, complete all as specified and directed.

Female brass threaded adaptor (FTA/ FBTA) of 16 mm external dia fixed in repairs, complete all as specified and directed.

Female brass threaded adaptor (FTA/ FBTA) of 20 mm external dia fixed in repairs, complete all as specified and directed.

Female brass threaded adaptor (FTA/ FBTA) of 25 mm external dia fixed in repairs, complete all as specified and directed.

Brass chromium plated swivel shower rose 125 mm size incl swivel arm fixed in repairs, complete all as specified and directed.

15 mm bore bib tap, cast copper alloy, chromium plated, with crutch butter handle, screwed down screwed for iron pipe or for brass ferrule,fixed in repairs complete all as specified and directed.

All as per item No. 43 here-in-before but fancy type.

15 mm bore pillar taps, cast copper alloy, chromium plated with capstain heads, chromium plated, screwed down high pressure, with or without lettered `Hot' or Cold with long screwed shanks and fly-nuts, screwed for iron pipe,fixed in repairs complete all as specified and directed.

All as per item No. 45 here-in-before but fancy type.

Brass CP mixer for Sink/WHB for mixing hot & cold water screwed down for iron pipe 15 mm bore, fixed in repairs complete all as specified and directed.

Towel rail 600 mm long of PTMT fixed with and including chromium plated brass screws and wooden/plastic cleats. (minimum weight 190 gms), fixed in repairs complete all as specified and directed.

Towel ring of PTMT fixed with and including chromium plated brass screws and wooden/plastic cleats (Minimum weight 90 gms),fixed in repairs complete all as specified and directed.

Soap dish, vitreous china white, approximate size 160 mm x 160 mm x 90 mm. fixed with screws complete all as specified and directed.

Grating doom PTMT 125 mm dia with waste hole (minimum weight 40 gms), fixed in position complete all as specified and directed.

Shelf of PTMT fixed in position with and including chromium plated brass screws and wooden / plastic cleats (minimum weight 300 gms) complete all as specified and directed.

PVC connection with PTMT nuts 15 mm bore, of length 600 mm, fixed in repairs complete all as specified and directed.

PVC low level flushing cistern, 10 ltrs capacity, coloured, including ball valve, bracket, inlet, PVC pipe, PVC connection 600 mm long etc. fixed in repair complete all as specified and directed.

Dismantling floor .hearth or wall tiling including cement mortar bedding, removing serviceable tiles to store and removing the rubbish off the premises. complete all as specified and directed.

Non-skid coloured ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 Sqm but not exceeding 0.11 sqm, as in floors etc. laid over and including 15 mm thick screed bed in CM 1:6, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles complete all as specified and directed.

Glazed ceramic tiles (plain or printed) of each tile of size exceeding 0.11 Sqm but not exceeding 0.18 sqm, 7 mm thick as on vertical surfaces like dado, skirting etc jointed in neat cement slurry and pointed in coloured cement laid over and including 10 mm cement plaster backing in CM 1:4 complete all as specified and directed.

Demolition of plain cement concrete (unreinforced) in ground floor and pavings n.exc 15 cm thickness (below or above ground level) complete all as specified and directed.

Cement concrete 1:3:6, type C-2, using 40 mm graded stone aggregate, 75 mm thick as in plinth protection including finishing the surface fair and even laid in alternate bays system, length of each bay n exc 1.5 mtr, including forming 12mm wide and 50 mm deep joint, filled with mastic filling to the full depth comprising mixture of one part heated blown bitumen of 85/25 penetration and two parts sand by (volume) complete all as specified and directed.

100 mm thick PCC 1:4:8,, type D-2 using 40 mm graded aggregate as in floors and pavings complete all as specified and directed.

Machine in cut kota stone flooring 20-25 mm thick (size of kota stone slab 22"x22") laid over and including 20 mm thick bedding layer CM 1:6 with pigments to match the shade of slab including cutting, rubbing and mirror/ granite finish polishing including to remove dust complete all as specified and directed.

PCC 1:2:4, type B1 using 20 mm graded aggregate as in lintels upto 1.5 m clear span, cills, steps; seismic and other similar bands,plinth courses, string courses,lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones,bed plates, kerbs not provided for in Item 04028, water troughs and the like including weathering, slightly rounded or chamfered angles and throating complete all as specified and directed (Note :- The cost of form work shall deemed to be included in the unit rate quoted).

Demolition of plain cement concrete (reinforced) as in ground floor and pavings n.exc 15 cm thickness (below or above ground level) complete all as specified and directed.

Precast reinforcement concrete 1:2:4, type B-1, using 20 mm graded aggregate as in landings, covers for manholes etc complete all as specified and directed.

Mild steel TMT bars 10 mm dia and over, cut to length, bent to shape required, including crankng, bending spirally for hooping for columns hooking ends and binding with and dincluding mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed.

Taking down shutters of any description exc 1 sqm & n.exc 2 sqm each leaf and refixing in same opening complete all as specified and directed.

Taking down shutters of any description exc 2 sqm each leaf and refixing in same opening complete all as specified and directed.

Special treatment to sunken portion with 10mm thick plaster in CM 1:4 with WPC liquid complast 421 and applying one coat each of Nittoproof 100 and Nittoproof 120 on plaster surface. Rendering again 10 mm thick plaster in CM 1:4 mixed with complast 421 in sunken portion of WC and CI pipe joints shall be filled / jointed with mixture of cement, fine sand and Nittoproof 130 and provide hole in the wall and fix 600 mm long 20 mm dia GI spouts light grade 1:3:6 filling, floor area of WC upto 1.5 Sqm etc. complete all as specified and directed. Note :- The rates incl for drilling of the hole RCC @ 1.00 m centre to centre, to a depth to a length of 30 mm and fixing of PVC pipes of dia 15/20 mm laid dry and grouting with cement slurry mixed with can bax 100 chemical with pressure grouting with minimm 3 Kg/Sqm all as specified and directed.

Water closets, Vitreous China, Orissa Pattern of size 580 x 440 mm, with white integral foot rest including cast iron `P' or `S' trap & connections to flushing pipe, anti syphonage pipe etc, fixed in repairs complete all as specified & directed by Engineer in Charge.

Vitreous china wash down water closet pan ( padestal pattern) any colour, including P or S trap with and including plastic seat cover and fixing bolts etc. and making connections, fixed in repairs complete all as specified and directed.

Vitreous China wash hand basin White of 580 mm x 450 mm size flat back including cutting for and pinning in ends of brackets, including waste coupling CP and waste / vent pipe and brackets but excluding taps, fixed in repairs complete all as specified & directed.

Vitreous china urinal, half stall type white (excluding flushing cistern, flush pipe and vent pipes) but including pair of brackets,PVC waste & vent pipe and connections, fixed in repairs complete all as specified & directed.

75 mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls as in repairs complete all as specified and directed.

110 mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls as in repairs complete all as specified and directed.

75 mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches/floors, as in repairs, complete all as specified and directed.

110 mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches/floors, as in repairs, complete all as specified and directed.

PVC (SWR) bends any radius with access door of 75 mm bore,fixed in repairs complete all as specified and directed.

PVC (SWR) bends any radius with access door of 110 mm bore,fixed in repairs complete all as specified and directed.

PVC (SWR) junction of 75 mm bore single, (single T) equal or unequal with access door, fixed in repairs, complete all as specified and directed.

PVC (SWR) junction of 110 mm bore single, (single T) equal or unequal with access door, fixed in repairs, complete all as specified and directed.

PVC (SWR) branch piece of 75 mm bore ,double (double Y) equal or unequal fixed in repairs, complete all as specified and directed.

PVC (SWR) branch piece of 110 mm bore ,double (double Y) equal or unequal fixed in repairs, complete all as specified and directed.

PVC (SWR) 75 mm bore vent cowl fixed in repairs, complete all as specified and directed.

PVC (SWR) 110 mm bore vent cowl fixed in repairs, complete all as specified and directed.

75 mm dia cast iron floor trap plain with CP gratings including jointing with solvent cement and setting in and including PCC 1:2:4, type B1 complete all as specified and directed.

PVC (SWR) gully trap 125/110 mm, with including setting and jointing with solvent cement complete all as specified and directed.

Demolition of brickwork or stone/boulder masonry, built in Cement mortar/ Cement lime mortar including all quoins, arches, pillars,etc, but including ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed.

Brickwork with fly ash bricks, straight or curved on plan exc 6 m mean radius, built in CM 1:6, complete all as specified and directed.

Taking down cement plaster of any description on brick or stone walls etc., including raking out joints, hacking for key, scrubbing down with water etc., complete all as specified and as directed.

10 mm thick rendering in CM 1:6 on fair faces of brick or concrete surface finished even and smooth without using extra cement complete all as specified and directed.

15 mm thick rendering in CM 1:4 on other than fair faces brick or concrete masonary surface finished even and smooth without using extra cement complete all as specified and directed.

Preparation of newly plastered surfaces of walls and applying three coats of white wash complete all as specified and directed.

Complete removal of existing treatment of old plastered surface of ceilings and applying two coats of white wash complete all as specified and directed.

Preparation of newly plastered surfaces of walls and applying two coat of cement base paint over a coat of alkali resistent primer complete all as specified and directed.

Preparation of new plastered surfaces and applying two coats of oil bound distemper over one coat of chalk whitining on walls complete all as specified and directed.

Complete removal of existing treatment of old plastered surfaces fo walls and applying two coats of oil bound distemper over a coat of chalk whitening complete all as specified and directed.

Preparing old surfaces of wood and wood based material of any description and exceeding 10 cm width or girth, not otherwise described and applying of two coats of synthetic enamel paint complete all as specified and directed.

Galvanised mild steel wire cloth, 0.63 mm nominal dia of wire and average width of aperature 1.40 mm and fixed with tinned tacks or galvanised wire staples, fixed in repairs complete all as specified and directed.

3 mm thick sheet glass, ordinary quality with oil putty/wooden beading, in square not exceeding 0.50 sqm in each pane including hacking out old existing broken glass pieces complete all as specified and directed.

3 mm thick figured glass,pin headed type with oil putty/wooden beading in square not exceeding 0.50sqm in each pane including hacking out old existing broken glass pieces but complete all as specified and directed.

Sinks with drainage board made of stainless steel 1 mm thick, kitchen or laboratory with plugs, washers and wastes ; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915 mm x 460 mm, bowl size 410 mm x 330 mm x 160 mm, includind down take pipe and CP coupling, fixed in repairs complete all as specified and directed.

Sinks made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495 mm x 420 mm bowl size 410 mm x 330 mm x 160 mm includind down take pipe and CP coupling, fixed in repairs complete all as specified and directed.

Dismantling of stone slabs and tiles of any description or thickness in floors, aprons, laid bedded and pointed in any mortar etc complete all as specified and directed.

Granite 20mm thick (of any type) table rubbed and polished green colour as in steps , jambs, pillars, windows cill, cooking platform and like in one piece laid over and inlcluding 15 mm thick cement mortar (1:4) and pointing in white cement (1:2) using marble dust with admixture of pigment to match the shade of granite complete all as specified and directed.

Machine cut cudappa stone slab 20-25 mm thick over and including 15 mm thick cement screed bed in CM 1:6, laid and jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing, polishing complete all as specified and directed.

Form work for sides of concrerte of pillar, posts, struts for rough finished surfaces of concrete flat complete all as specified and directed

sonu enterprises

M/s S.R lahoti