Supply Installation Testing and Commissioning of Fully Automatic Cleaning and Grading Plant 2 TPH

Supply, Installation, Testing & Commissioning Of Fully Automatic Cleaning and Grading Plant 2 TPH As per Details given in Bid Document

Bucket Elevator to Feed Seed Grader- • Capacity: Minimum 3 TPH (Based on wheat, at 12% moisture and 10% impurities). • Feed machine complete S.S Spouting, S.S Spout section. • Power: 1 H.P • Material used: G.I Steel • Platform with ladder • Bucket: HDPE, self-cleaning type buckets. • Bucket size: minimum 4 inch • Bearing made: NTN/SKF/NRB/NBC /FK OR EQUIVALENT • Belt: Nylon/Cotton • Belt speed: will not exceed 1M/sec. • Leg Casing Gauge: 18 Gauge of G.I steel • with suitable inspection door opening at suitable height • Head & Boot Casing Gauge- 14 Gauge • Dump Hopper: It shall be made of G.I steel.

Seed Grader 2 Ton- • Seed grader should contain three screens model suitable for cleaning & grading of various crop seeds i.e. Wheat, Paddy, Barley, Gram, Pulses, and Maize etc. • Capacity: minimum 2TPH (Based on wheat, at 12% moisture and 10% impurities). • Feed roller and hopper. • 1 set of screens of particular crop • 2-meter-long air trunk with 01 Elbow. • Total installed power of machine shall be 6 HP (Make: Crompton/ Kirloskar/Havel’s or Equivalent) • Sieves are quick changeable type. • Double Aspiration system for removing dust from the seeds • All screen sections will be changeable & screen perforation will be cleaned by rubber balls. • Arrangement of inspection window for checking/working of screens. • Toolkit and other standard features. • Bearing made: NTN/SKF/DODGE/NRB/NBC or Equivalent • Rectangular Pipe: Tata Steel/standard make. • Shaft: 50 mm, drawn shaft. All shafts are made of EN-8 & are mounted on • Pillow/flange type self-aligned high quality ball bearings with built in casing

Bucket Elevator to Feed Magnetic Separator- • Capacity: Minimum 2 TPH (Based on wheat, at 12%moisture and 10% impurities). • Feed machine complete S.S Spouting, S. S. Spout section. • Power: 1 HP • Material used: G.I Steel • Platform • Bucket: HDPE, self-cleaning type buckets. • Bucket size: minimum 4 inch • Bearing made: NTN/SKF/NRB/NBC/ FK or Equivalent. • Belt: Nylon /cotton • Belt speed: will not exceed 1M/sec. • Leg Casing Gauge: 18 Gauge of G.I steelwith suitable inspection door opening atsuitable height. • Head & Boot Casing Gauge- 14 Gauge • Feeding Hopper: It shall be made of G.I steel

Magnetic Separator 2 Ton- • Magnetic separator of approx. 100*1000 mm with dusttight enclosure suitable • Capacity: minimum 2 TPH • Magnet Grade: higher Grade • Magnet Gauss Power: 12000 to 13000 Gauss Power or High-intensity magnetic separator, minimum magnetic field strength as required for effective removal of ferrous contaminants • MOC of product contact parts: M.S SHEET 16 SWG Side covers • Body construction: M.S BODY 50mm X50mm x 3mm • Supported Roll: M.S. 100mm Dia. X 1000mm LENGTH 1 NOS • Impurities to Be Trapped: Mud balls, FineMS particle, ferrous particles • Material size: Minimum 0 to 25 mm • Motor: 1.0 HP with 1440 rpm motor • Vibrating Motor: 0.5 hp Vibratory • Gear Box: Ratio 30:1 P80 Worm Gear • Pedestal: TR Make • Belt: 0.8mm PU Belt • Suitable for (Application): to separate magnetic material from raw material

Bucket Elevator to Feed Gravity Separator- • Capacity: Minimum 3 TPH (Based on wheat, at 12% moisture and 10% impurities). • Feed machine complete: S.S Spouting, SS Spout section. • Power: 1 HP • Material used: G.I Steel Platform • Bucket: HDPE, self-cleaning type buckets. • Bucket size: minimum 4 inch • Bearing made: NTN/SKF/NRB/NBC/ FK or Equivalent. • Belt: Nylon /cotton • Belt speed: will not exceed 1M/sec. • Leg Casing Gauge: 18 Gauge of G.I steelwith suitable inspection door opening atsuitable height. • Head & Boot Casing Gauge- 14 Gauge • Feeding Hopper: It shall be made of G.I steel

Automatic 3 Fan Gravity Separator (Panel With VFD)- • For separation of large size seeds like wheat,maize, peas, paddy, Lentil & mustard etc. • Quick assembly deck type arrangement andeasy adjustment for side and end slope, aircontrol mechanism for fan. • Capacity: 2TPH (Based on wheat, at 12%moisture and 10% impurities). • No. of fans – 03, mounted of single blowershaft with individual Air Flow Control System. All fans are dynamically balanced. • Surge hopper over Gravity (Material G.I used) • Electric Motor: 02 (05 HP for Blower fans and 1HP for Gravity Deck. Make: Crompton/Kirloskar/Havel’s or Equivalent) • Toolkit and other standard features. • Bearing made: NTN/SKF/NRB/DODGE/NBC or Equivalent • Shaft: 40mm, drawn shaft. All shafts are madeof EN-8 & are mounted on Pillow/flange type self-aligned high qualityball bearings with built in casing. • Channel: Tata Steel/ 4 inch, 100mm x 50mmor Standard Company make

Supply, Loading-Unloading, Erection, Installation, Testing, Commissioning and Training- Supply, Loading-Unloading, Erection, Installation, Testing, Commissioning and Trial Run shall be included. Training for operators shall be provided. Operation & maintenance manual should be provided.