UPGRADATION OF EXTERNAL ELECTRIC SUPPLY AT 162 MH

Amount

Disconnecting and Shifting of existing transformer capacity of 400KVA, diconnection of LT/HT side cable of transformer and shifting of transformer from 162 MH to MES yard all complete as specified and as directed.

Disconnecting and Shifting of existing transformer capacity of 200KVA, diconnection of LT/HT side cable of transformer and shifting of transformer from 162 MH to MES yard all complete as specified and as directed.

Shifting, Mounting, installation, testing only 500KVA transformer and connection of LT/HT side cable of transformer from MES yard to 162 MH all complete as specified and as directed by Engr - in -charge. Cost of necessary T&P and Manpower required shall be deemed to be included in quoted rate of this item only.

Supply and Installation of Voltage stabilizer for automatic operation, three phase naturally oil cooled indoor type & designed for input variation between 340 V to 460 V with output voltage stabilized at 415 with accuracy ± 1% and speed of correction 50 Volts per second and of capacity 300 KVA 100% copper winding as per BIS specification IS 9815(part 1): 1994 reaffirmed 2009 or latest updated upto 2025 , manufacture must submit source of copper purchased and 100% copper used in winding, manufacture certificate of inhouse NABL accredited laboratory for testing of servo voltage stabilizer, calibration certificates of testing equipment's duly certified by NABL team, contactor will arrange testing facility at site or at manufacture workshop at his own cost and testing will be done in presence of engr-in-charge or rep of accepting officer. The cost of testing arrangement shall be included in item rate all compared as specified and directed.

Excavation in trenches in soft/loose soil not exceeding 1.5 mtr deep and not exceeding 1.5 mtr wide for laying of cable all as specified and directed at site.

Returning, filling in including spreading, leveling, watering and well ramming excavated soft/loose soil in layers , all as specified and directed at site

Removing excavated material surplus (soil ) to a distance not exceeding 50 mtr and depositing where directed at a level not exceeding 1.5m above the starting point all as specified and directed.

M&L for sand cushioning to under ground cable using locally available fine clean dry river sand over,under ground UG cable laid in treches and gently punning to cushioning to cable complete all as directed by Engineer-in-Charge.

Supplying and laying reinforced precast concrete cable cover Class LV, Type I, flat, size 250 mm x 150mm x 40mm complete all as specified and directed.

S&F in repair,given size bore tubing “light grade” in trenches/ on pole for protection of cables complete all as specified & directed by Engineer-in-charge 80 mm bore

As per Item No 10 : 50 mm bore

As per Item No 10 : 32 mm bore

Supply laying and testing cable XLPE insualted screened PVC bedded galvanished steel strip or wire armoured electric power cable(heavy duty) with standard aluminium conductor 11000 volts gared of size 3.5 core 150 Sqmm incuding all the fitting needed for installation all complete as specified and as directed.

Supply, laying & testing cable XLPE insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty)with stranded aluminium conductor, 11000 volts grade, of size 3 core 95 sq mm including all the fittings needed for its installation all complete as specified/directed.

Material and labour for earthing complete with galvanised steel earth plate electrode of size 600 x 600 x 6 mm thick, burried directly in ground (earth pit not less than 2.25 m below normal ground level) with top edge of the plate not less than 1.5 m below normal ground level connected to galvanised strip 32x6 mm as earthing lead by means of nuts, bolts and washers of galvanised iron and earth lead protected by galvanised iron pipe 15 mm bore (light grade) and connected to earth test point and including cement concrete pit in PCC (1:3:6) type C-1(using 20 mm graded aggregate) and pre-cast RCC cover slab of size 540 x 540 x 50 mm thick, reinforced with 8 mm dia TMT bars both ways and one handle for lifting made with 10 mm dia mild steel bar,funnel, wire mesh 20 mm bore galvanised (light grade) for watering, charcoal and salt in alternate layers including necessary execuation and eath works in any types of soil complete all as shown on Electrical plate No 3 of MES SSR-I including taking out the old earthing material complete all as specified and directed.

Supply & installation testing and commissioning of symmetric type Galvanized steel high mast lighting system of 11 meter in length in two section, 3 mm & 4 mm section thickness, top dia 150 mm, bottom dia 360 mm, with AISI 3161 steel wire rope 7/19, 6 mm dia system 2 for wich and 3 for lantern carriage, including of timer pannel, complete all as specified and as directed including following :- (a) Sustain upto wind speed of 180 Kmph (b) Non Flame Proof integral Motor. (c) Movable lantern carriage. (d) Double drum Winch. (e) 6 mm 316 Grade S S Hoisting Ropes of 7/19 construction. (f) Trailing Cable –1 per mast (5 Core 2.5 Sq mm) (g) Lightning Finial , Anchor Plate & Template (h) Accessories like Plug and Socket, GI Nut bolt with double washer,wiring cable for fixture, flexible conduit, copper lug, PVC tape, Cable tie etc (j) Foundation Bolt & Nuts T & P for fixing with its allied accessories as per OEM. System is suitable for loading 08 nos 350 w LED lights (k) Installation, Testing & Commissioning, Casting of foundation for High Mast & Panel @10T/sqm soil bearing as per OEM. (l) Earthing for High Mast and Timer panel, Power Supply up to the Panel & Cable laying, Providing Power Cable from High Mast to Panel. Note: Installation should be complete in presence of OEM Rep Make Crompton or Phillips or Bajaj

Supply and fixing of 9 watt LED aviation light with electric connection complete all as specified and directed.

Supply installation, commissioning and testing including providing all necessary electrical connection, LTpanel, outdoor type factory made out of 3.15 mm thick MS sheet of size 0.6 mx 0.6 mx 0.50 m deep having hinge opening arrangement in front and back side and bottom frame made out of angle iron of size 50x50x6mm thick and 04 Nos legs 0.5 meter length with cable entry and exit circular hole with cable gland & gasket at bottom including painting to all internal and external exposed steel surfaces with powder coating paint (5 stage process) with duly fixed in ground with necessary PCC foundation (1:2:4) type B1, with danger notice plate, street light panel of 1.6mm thick mild steel sheet, vitereous enamelled (white), with letters, figures and conventional skull and bones in signal red colour, fixing lugs, bolts, screws etc complete all as directed by the Engr-in-Charge and comprising of the following accessories complete including following accessories -(a) Aluminium bus bar suitable for 200 Amp 0.5 mtr long fixing on suitable capacity and size insulators ---04 nos , 100 A MCCB incommer, Phase indicator lamps (RYB) -set of 3, Internal Wiring complete all as specififed and directed. Note : Cost of foundation to be included in the quoted price.

Supply and fixing LED flood light 200 watt 230 V AC outdoor type with thermal management in multiple optics and equipped with IP66 protection, with impact and corrosion resistant complete with driver and lamp. Make - philips/havells/crompton.

Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 16 sq mm 4 core complete all as specified and directed.

M&L for horizantal boring/drilling hole mannual under the road in soft/loose soil without cutting/disturbing the existing road and inserting GI pipe 80/50/40/32mm bore for drawing the cables complete all as directed and specified. (Note: (i) Cost of acessories required for making hole/bore deemed to be included in the quoted rate. (ii) GI pipe has been measured and paid separately)

Supply & fixing flexible LED tricolor strip light length18mtrs high surge with stand capability uoto 3.5 kv, 96 LEDs per meter, 8w/mtr, 220V-240V, 50 Hz with IP 65 complete all as specified and directed.

S&F Supply of 60W All in One Hybrid Solar Street Light, 50,000 LED life, Panel 90 Wp Monocrystalline, AC input Voltage 140V-280V, System efficacy >150 LPW, MPPT, Intelligent Fix Dimmig/PIR Motion Dimming , 42Ah LiFePO4 12.8V DC Battery, CCT 5700 ANSI, CRI > 70, over charge, deep discharge, reverse polarity and over temperature protection, 24 hours autonomy, 4kV Internal with Driver +10KV SPD, Driver Efficiency > 85%, O/P Short Circuit Protection, O/P Open Circuit protection, OVP > 320 V AC, Housing Aluminium extruded body, externally accessible CCU and battery, IP65, Suitable for Pole top OD 70-80mm, Mounting Pole top, side/center mounting, Certification LM79 (NABL), TTR, BIS for Solar Panel, BIS for Battery, LM80 complete all as specified and as directed.

Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out complete all as specified and as directed.

M&L hardcore of gauge not exceeding 63 mm of broken bricks, deposited, spread and levelled in layers not exceeding 15 cm thick, watered and rammed to a true surface complete all as specified and as directed.

M&L for 75 mm thick PCC(1:3:6) type C-2 using 40 mm graded stone aggregateas in plinth protection including making dummy jionts finished even & smooth without using extea cement complete all as specified and as directed.

M&L for Machine pressed precast concrete interlocking colour paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade complete all as specified and as directed.

Demolition of cement concrete unreinforced, in ground floor or pavings below or above ground level from foundation of pump sets including removal of debris from site complete all as specified and as directed .

M&L for PCC 1:2:4 type B-1 using 20 mm graded mechanically crushed stone aggregates as in foundation, sub base or mass concrete complete all as specified and as directed.

M&L for Mild steel, plain, black sheet with 8mm thikness including bending or turning up, mitred angles, etc. as required complete all as specified and as directed.

M/S R D CONSTRUCTION (BID ID -3313668)

AFTAB ENTERPRISES (BID ID -3314128)

M/S. UDDUG CONSTRUCTION (BID ID -3313851)

R D Enterprises (BID ID -3313095)

FREEZCON (BID ID -3313922)

M H KHAN (BID ID -3313721)