CA NO GE/AFJ-19/2020-21 CAMOUFLAGE PAINTING TO CERTAIN BUILDINGS AND COMPOUND WALL IN KALUCHAK AREA AND TECHNICAL AREA UNDER GE AIR FORCE JAMMU

Amount

Preparation of newly plastered surfaces of walls and applying two coats of exterior emulsion paint of Make Apex (Asian) in any tint, over a coat of primer (as per manufacturer's instruction of Apex) over and including one coat of Birla white wall care putty, as on melbow width like wall, roof projection, facias, chhajja, etc all as per manufacturer's instructions all as specified and directed by Engr-in-charge. MAKE: BERGER (WEATHER COAT ALL GUARD) / ASIAN (APEX ULTIMA) / NEROLAC (EXCEL TOTAL) / JEHNSON & NICHOLSON / DULUX ICI

Preparation of old previously treated surfaces of walls and applying two coats of exterior emulsion paint of Make Apex (Asian) in any tint, camouflage painting/ Sigma pattern (with RGB value of each bldg as approved by user) width like wall, roof projection, facias, chhajja, etc all as per manufacturer's instructions all as specified and directed by Engr-in-charge. MAKE: BERGER (WEATHER COAT ALL GUARD) / ASIAN (APEX ULTIMA) / NEROLAC (EXCEL TOTAL) / JEHNSON & NICHOLSON / DULUX ICI

Preparation of newly plastered / unplastered surfaces of walls and applying two coats of cement base paints in camouflage pattern (Military green, Coffee green, apple green) of any shade on walls (shade as approved by users) including curing before and after applying each coat complete all as specified and directed by Engineer-in-Charge. MAKE: SNOWCEM / ASIAN / JEHNSON & NICHOLSON / BERGER / DURACEM

Preparation of old treated plastered / unplastered surfaces of walls and applying one coat of cement base paints in camouflage pattern (Military green, Coffee green, apple green) of any shade on walls (shade as approved by users) including curing before and after applying each coat complete all as specified and directed by Engineer-in-Charge. MAKE: SNOWCEM / ASIAN / JEHNSON & NICHOLSON / BERGER / DURACEM

Preparation of old decorated surfaces of steel or iron works of any description exc 10 cm over width or girth and applying one coat of synthetic enamel paint, complete all as specified and directed by Engr-in-charge. MAKE: NEROLAC PAINTS / JEHNSON & NICHOLSON / BERGER PAINTS / ICI DULUXE / ASIAN PAINTS

Preparation of old decorated surfaces of wood and wood based material of any description over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed by Engr-in-charge. MAKE: NEROLAC PAINTS / JEHNSON & NICHOLSON / BERGER PAINTS / ICI DULUXE / ASIAN PAINTS

Preparation of old surfaces of walls by brooming down with steel wire brushes, scrapping down smoke soot moulds moss and efflorescence salts washing, rubbing down and cleaning oil greasy spots etc and apply one coat of white wash to walls complete all as specified and directed by Engr-in-charge.

Preparation of old surfaces of ceiling by brooming down with steel wire brushes, scrapping down smoke soot moulds moss and efflorescence salts washing, rubbing down and cleaning oil greasy spots etc and apply one coat of white wash to ceiling complete all as specified and directed by Engr-in-charge.

Preparation of old surfaces of walls by brooming down with steel wire brushes, scrapping down smoke soot moulds moss and efflorescence salts washing, rubbing down and cleaning oil greasy spots etc and applying one coat of distempering with oil emulsion distemper white or any tinted on walls, filling gaps by putty after washing rubbing down and stopping of distermpered surfaces, complete all as specified and directed by Engr-in-charge. MAKE: NEROLAC PAINTS / JEHNSON & NICHOLSON / BERGER PAINTS / ICI DULUXE / ASIAN PAINTS

Preparation of old previously treated surfaces of walls including complete removal of exisiting treatment and applying two coats of oil emulsion distemper, over a coat of primer (as per manufacturer's instruction) over and including one coat of Birla white wall care putty, all as specified and directed by Engr-in-charge. MAKE: NEROLAC PAINTS / JEHNSON & NICHOLSON / BERGER PAINTS / ICI DULUXE / ASIAN PAINTS

Taking down cement plaster on brick/concrete surfaces etc including racking out joints, hacking for keys and scrubbing down with water etc and removing all debris to a distance exc 50 mtr but not exc 100 mtrs, complete all as specified and directed by Engr-in-charge.

Dismantling wrought iron or mild steel work in posts, struts, including doors, gates but excluding framed truss, etc. or of any description not otherwise provided for complete all as specified and directed by Engr-in-charge.

Demolition of Cement Concrete of any description and in any position not otherwise specifically provided for, complete all as specified and as directed by Engineer-in-charge.

Demolition of brick work or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars,drains etc, but excluding ashlars facings, dressed stone work and precast concrete articles complete all as specified and directed.

Providing, cement concrete 1:2:4 type B-1 using 20mm graded crushed stone aggregates) in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, bed blocks for hold fasts, kerbs, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, all as specified and directed by Engineer-in-Charge.

Material and labour including roughening of existing old surface of concrete including picking, sweeping, cleaning and washing down with water to remove dust and other unwanted materials and brushing neat cement slurry with 3.00 kg of cement per Sqm complete all as specified and as directed by Engineer-in-charge.

Material and labour plain cement concrete 1:1.5:3 type B-1 using 20mm graded crushed stone aggregates including finishing the surfaces even and smooth as in roof padding on roof upto height 30 metre from ground level complete all as specified and as directed by Engineer-in-charge.

M/L Cement concrete 1:3:6 type C2 using 40mm graded stone crushed aggregate in plinth protection, 75mm thick, finished even and smooth using extra cement, including making joints 12mm wide to the full depth of PCC at every 3 metres and at every change of direction and filling the same with & including bitumen and sand 1:3 by weight complete.

Brick work with old size sub class 'B' bricks, straight or curved on plan exc 6 m mean radius built in cement mortar 1:4, complete all as specified and as directed by Engr-in-Charge.

M&L for Brick work with old size bricks, using old serviceable bricks, as retrieved from dismantling of brick work under respective item, after removing mortar from and cleaning bricks; straight or curved on plan exc 6m mean radius, built in CM 1:4 complete all as specified and directed.

Hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts; posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165,complete all as specified and as directed by Engineer-in-charge.

Rendering 15 mm thick on fair faces of brick work or concrete surfaces upto 1.50 metre height, finished even and smooth (without using extra cement) on walls in cement mortar (1:4), complete all as specified and directed by Engr-in-charge.

Rendering 15 mm thick on fair faces of brick work or concrete surfaces beyond 1.50 metre height, finished even and smooth (without using extra cement) on walls in cement mortar (1:4), including mixing of water proofing compound as per manufacturer's instructions complete all as specified and directed by Engr-in-charge. Note: Water proofing compound shall be measured and paid seperately as "Supply only"

Supply only liquid water proofing admixture @ 0.20 litre per bag of cement complete all as specified and directed by Engr-in-charge. Make: Dr. Fixit/Pidilite

Preparation of old/previously decorated unplastered or plastered surfaces of wall/ceiling/roof and applying one coat of "AQUA Crete Paint" complete all as specified and directed by Engr-in-charge.

Preparation of old/previously decorated unplastered or plastered surfaces of wall/ceiling/roof and applying one coat of "Bitumenous paint" complete all as specified and directed by Engr-in-charge.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tile to store and rubbish off the premises complete all as specified and directed by Engineer-in-Charge.

Glazed ceramic coloured tiles as per IS-13753, 350mm x 250 mm x 7 mm thick/450mm x 350mm x 7mm thick on vertical surfaces such as skirting /dado etc. set and jointed in neat cement slurry and pointed in white or colour cement to match laid over and including 10mm thick rendering in cement mortar 1:4 on fair faces of brick work or concrete surfaces as backing coat complete all as specified and directed by Engineer-in-Charge. MAKE: KAJARIA/SOMANY/NITCO

Galvanised. 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured) complete including taking down/ dismantling of old barbed wire in fencing of any description complete all as specified and directed by Engr-in-charge.

Re-straining/Re-scuring existing barbed wire of any description, including securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured) complete all as specified and directed by Engr-in-charge.

Taking out from any position of old concertina coil, any type, 600 mm dia having weight 8.60 kg per coil and refixing the same in same position including stretching to a suitable length complete all as specified and directed by Engr-in-charge.

Barbed razor tape concertina coil SG hot galvanized spring tensile wire of UTS 145 to 150 Kg/mm, dia of coil 600mm and having minimum 10 number of coils per running metre when stretched, 105 bars on each trun when stretched, having minimum 8.50 kg weight of each coil including dismantling/taking out old expended concertina coil of any description or in any position complete all as specified and directed by Engr-in-charge. Make: Manufactured by M/s Special Steel Ltd or M/s Super Fence or M/s Global Engineering

Preparation of new steel and iron surfaces exceeding 10 cms width or girth and applying two coats of synthetic enamel paint over a coat of red oxide/zink chrome primer, including removing of zinc coating by using modrant solution before applying red oxide primer complete all as specified and as directed by Engr-in-Charge.

SCHEDULE 'A' PART-II (Schedule of credit) Credit amount of Rs (Refer schedule of credit) for retrieved material mentioned in Sch 'A' Part-II (if applicable) of Tender documents in PDF form will be deducted offline during acceptance of tender of lowest bidder.

Note: (1) The repair including periodical services has to carried out as and when required basis and accordingly site will be available in piecemeal wise and as directed by Enginer-in-Charge.

(2) The contractor shall remove all the rubish/waste materials from the site of the work and deposit the same at a place exceeding 100 metres as directed by Engineer-in-Charge. The contractor shall also clean all joinery, floor, glass panes, fittings and fixtures etc. which may have been affected by the execution of work and will leave the site clean and tidy to the entire satisfaction of Engineer-in-Charge. The rates quoted by the Contractor for all the relevant items of BOQ shall be deemed to be included of this element.

(3) Camouflage painting (Sigma pattern with RGB value) for each bldg will be approved by the users.

Karmnaya Construction

M/s Sunny Gupta

M/S GEE EMM MIR

M/S SV CONSTRUCTIONS