Providing Mastic Asphalt surfacing over damaged /settled concrete road surfaces at Gate No.1 and 2 including different bridges and approaches at Paradip Port

Amount

Dismantling of RCC works by Jack hammer or any approved method and disposing the same with supply of all labour, engagement, hire & running charges of all equipments, T&P, all taxes, Port entry fees, providing safety arrangements for workmen, cleaning the site, all transportation etc all complete excluding GST and as directed by the Engineer in charge.

Cement concrete (1:1.5:3) using 12mm to 20mm size C.B.G. chips for all floors, foundation & plinth etc. of approved quality mixing, hoisting, laying, compacting, curing with cost and supply of all materials, labour, T&P, taxes, tollage, royalties, etc. all complete but excluding GST as directed by Engineer-in-charge.

Supply Tor/TMT Steel manufactured by SAIL/TISCON/VIZAC of Fe-500 confirming to IS-1786 including cutting, straightening, bending, binding & placing the grills in position for RCC works binding the grills with binding wire of 18 to 20 gauge including supply of steel, labour, materials, transportation charges, T&P, taxes, etc. all complete but excluding GST as per the direction of Engineer-in-charge. (NB: No payment shall be made for extra weight than theoretical co-efficient).

Providing rigid smooth leak proof centering & shuttering made of steel/ply, plank of approved quality for R.C.C. structures and deshuttering and removing the same after due period with supply of all materials, labour, T&P, taxes, royalties, tollage, etc. all complete but excluding GST as directed by Engineer-in-charge.

Foundation and Plinth

Providing and laying bitumen mastic wearing course (as per specification) with industrial bitumen of grade 85/25 confirming to IS 702, prepared by using mastic cooker and laid to required level and slope including providing antiskid surface with bitumen precoated fine grained hard stone chipping of approved size at the rate of 0.005 cum per 10 sqm and at approximate spcing of 10cm centre to centre in both directions,pressed into surface protruding 1 mm to 4 mm over mastic surface including cleaning the surface, removal of debris etc. all complete .(Considering bitumen using 10.2% as per MORTH specification ) excluding GST as directed by Engineer-in-Charge.

25mm thick

40mm thick

LAXMIDHAR ROUT (BID ID -3244546)

SM ENTERPRISES (BID ID -3244016)

SRINIBAS PRADHAN INFRA PRIVATE LIMITED (BID ID -3243693)

M/S.RAMESH CHANDRA MOHANTY (BID ID -3244288)

M/s. P N Construction (BID ID -3244490)

M/S BHAIRAB CHARAN SWAIN (BID ID -3244443)

SABITA BEHERA (BID ID -3243980)