Renovation of Conference Hall on First Floor at Mini Sectt., at Gurugram

Amount

Dismantling wooden boardings in lining of walls and partitions,excluding supporting members but including stacking within 50 metres lead :Thickness above 25 mm up to 40 mm (HSR 5.46.3)

Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead For thickness of tiles above 25 mm and up to 40 mm (HSR 5.43.2)

Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge (HSR 5.23.2)

Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead (HSR 5.29.1)

Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved (HSR 5.70)

Providing and fixing specified wood frame work consisting of battens 50x25mm fixed with rawl plug and drilling necessary holes for rawl plug etc. including priming coat complete Kiln seasoned and chemically treated Hollock wood (HSR 8.18.1)

Providing and fixing plain lining with necessary screws/nuts & bolts/ nails, including a coat of approved primer on one face, and fixed on wooden /steel including a coat of approved primer on one face, and fixed on wooden /steel shall be paid separately). 12mm thick commercial ply conforming to IS : 1328 BWR type ( HSR 12.22.1)

Providing and fixing plywood 4 mm thick, one side decorative veneer conforming to IS: 1328 (type-1), for plain lining / cladding with necessary screws, including priming coat on unexposed surface with : Decorative veneer facings of approved manufacture (HSR 8.19.1)

Polyurethane polish (PU) two or more coats to give required finish including sqm two coat of wood sealer Including Preparation of surface/base complete as per specification (HSR-11.121)

Providing and fixing thermal insulation with Resin Bonded Fibre glass wool conforming to IS: 8183 having density 24 kg/m3, 50 mm thick, wrapped in 200G Virgin Polythene Bags fixed to wall with screw, rawl plug & washers and held in position by criss crossing GI wire etc. complete as per directions of Engineer-in-Charge. (HSR 28.45)

66mm overall thickness Partition with 8mm thick double skin Calcium Silicate Board made with Calcareous & Siliceous materials reinforced with cellulose fibre manufactured through autoclaving process with Compressive Strength 225 kg/sq.cm, Bending Strength 100 kg./ sq.cm (HSR 12.155.3)

Providing and fixing 12 mm thick frameless toughened glass door shutter of approved brand and manufacture, including providing and fixing top & bottom pivot & double acting hydraulic floor spring type fixing arrangement and making necessary holes etc. for fixing required door fittings, all complete as` per direction of Engineer-in-charge (Door handle, lock and stopper etc.to be paid separately). (HSR 12.171)

Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws (HSR 12.36.1)

Extra for Providing and fixing flush doors with decorative veneering instead of non decorative ISI marked flush door shutters conforming to IS: 2202 (Part I) On one side only (HSR12.38.1)

Providing and fixing double action hydraulic floor spring of approved brand and manufacture conforming to IS : 6315, having brand logo embossed on the body / plate with double spring mechanism and door weight up to 125 kg, for doors, including cost of cutting floors, embedding in floors as required and making good the same matching to the existing floor finishing and cover plates with brass pivot and single piece M.S. sheet outer box with slide plate etc. complete as per the direction of Engineer-in-charge With stainless steel cover plate minimum 1.25 mm thickness (HSR 12.160.1)

Providing and fixing mineral fibre false ceiling tiles at all heightsof size 595X595mm of approved texture, design and pattern. Thetiles should have Humidity Resistance (RH) of 99%, LightReflectance i!: 85%, Thermal Conductivity k = 0.052 - 0.057 w/mK, Fire Performance as per (BS 476 pt - 6&7)in true horizontallevel suspended on interlocking T-Grid of hot dipped all roundgalvanized iron section of 0.33 mm thick (galvanized @120gsm) comprising of main T runners of 15x32 mm of length 3000mm, cross T of size15x32mm of length 1200 mm and secondaryintermediate cross T of size 15x32 mm of length 600 mm to formgrid module of size 600x600 mm suspended from ceiling usinggalvanized mild steel item (galvanised@80gsm) 50 mm long8mm outer diameter M-6 dash fasteners, 6 mm diameter fullythreaded hanger rod up to 1000 mm length and L-shape leveladjuster of size 85x25x2 mm, spaced at 1200 mm centre tocentre along main 'T'. The system should rest on periphery walls/partitions with the help of GI perimeter wall angle ofsize24x24X3000 mm made of 0.40 mm thick sheet, to be fixedto the wall with help of plastic rawl plug at 450 mm centre tocentre & 40 mm long dry wall S.S. screws. The exposed bottomportion of all T-sections used in false ceiling support system shallbe pre-painted with polyester baked paint, for all heights. Thework shall be carried out as per specifications, drawings and asper directions of the engineer-in-charge.With 16 mm thick bevelled tegularmineral fibre falseceiling tile (NRC 0.55 to 0.6(HSR 32.47.1)

Providing and laying vitrified floor tiles in different sizes (thickness to bespecified by the manufacturer) with water absorption less than 0.08% andconforming to IS: 15622, of approved make, in all colours and shades, laid on20mm thick cement mortar 1 :4 (1cement : 4 coarse sand), jointing with greycement slurry @ 3.3 kg/ sqm includinggrouting the joints with white cementand matching pigments etc., complete. Size of Tile 1000x1000 mm(HSR 10.63.4)

Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by themanufacturer ) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1 :3 (1 cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete.(HSR 10.58)

Providing and fixing wash basin with C.I. brackets, 15 mm dia CP Brasssingle hole basin mixer of approved quality and make, including painting offittings and brackets, cutting and making good the walls wherever required:- White vitreous chinaware Wash basin size 550x400 mm with a 15 mm CP Brass single hole basin mixer(HSR 22.2.1)

Providing and fixing Stainless Steel A ISi 304 (18/8) kitchen sink as perIS:13983 with C.I. brackets and stainless steel plug 40 mm, including paintingof fittings and brackets, cutting and making good the walls wherever required Kitchen sink with drain board 510x1040 mm bowl depth 225 mm(HSR 22.10.1.2)

Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C.waste fittings complete. Semi rigid pipe 40 mm dia(HSR 22.14.1.2)

Providing and fixing CP Brass 32mm size Bottle Trap of approved quality & make and as per the direction of Engineer-in-charge.(HSR 22.15)

Providing and fixing floor mounted, white vitreous chinaware single piece, double traps syphonic water closet of approved brand/make, shape, size andpattern including integrated white vitreous chinaware cistern of capacity 1 Olitres with dual flushing system, including all fittings and fixtures with seatcover, cistern fittings, nuts, bolts and gasket etc including making connectionwith the existing P/S trap, complete in all respect as per directions ofEngineer-in-Charge.(HSR 22.34)

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, havingthermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. 20 mm nominal outer dia Pipes(HSR 22.86.2)

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. 20 mm nominal outer dia Pipes(HSR 22.87.2)

Providing and fixing C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms. 15 mm nominal bore(HSR 22.105.1)

Providing and fixing C.P. brass long body bib cock of approved qualityconforming to IS standards and weighing not less than 690 gms. 15 mm nominal bore(HSR 22.106.1)

Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931 15 mm nominal bore(HSR 22.107.1)

Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 15mm nominal bore(HSR 22.108.1)

Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS: 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.(HSR 22.181)(2Nos.) 1000Ltr.

Providing and fixing ball valve (brass) of approved quality, High or lowpressure, with plastic floats complete :15 mm nominal bore(HSR 22.103.1)

Providing and fixing 18 mm thick gang saw cut, mirror polished, premouldedand prepolished, machine cut for kitchen platfonns, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1 :4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. Granite of any colour and shade Area of slab over 0.50 sqm(HSR 8.26.2.2)

Extra for providing opening of required size& shape for wash basin/ kitchen sink in kitchen platfonn, vanity counter and similar location in marble/ Granite/ stone work, including necessary holes for pillar taps etc. including moulding, rubbing and polishing of cut edges etc. complete.(HSR 8.28)

Providing and fixing glazing in aluminium door, window, ventilator shuttersand partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of With toughened glass panes of 6 mm thickness (weight not less sqm than 15 kg/sqm)(HSR 12.177.1)

Recovery Items:-Bidder have to quote rate for recovery items at least or more than reserve price. The rate quoted against recovery items will not be included in the total amount rather it will be deducted while calculating financial statement of the agency.T Note:- The reserve rate/amount is minimum amount to be used as base for quoted purchase rate by the agency. No rates/amount below the reserve price will be entertained and reserve price will be considered for all purposes in case the agency quotes lesser than reserve price.-- Door @800/- Each

Window @300/- Each

Partition @12/- Kg In case of any difference in the Unit & Nomenclature of any of the HSR Items of Civil, PH depiced in the DNIT and that given in HSR, the unit and nomenclature given in HSR shall be applicable. The agency to whom the workk has been allotted have to produce original bill/ voucher for all quantity in tokan of proof of purchase of material.

Pulkit Aggarwal