8502 REPAIRS TO CERTAIN B/R WORKS AT SESS PALAYAMKOTTAI UNDER GE TIRUNELVELI

Demolition of PCC in ground floor & pavings/Tiles not exc 15 CM thickness complete all as specified and as directed

Material and labour 100mm thick PCC 1:4:8 type D2 using 40 mm graded stone aggregate as in foundations, filling and mass-concrete complete all as specified and directed.

Material and labour Cement concrete tiles 30cm x 30cm x25mm thick, with grey cement and pigment machine pressed antifungal treated; set, jointed and pointed in neat cement slurry in floors, including screed bed or bedding layer of mortar 20 mm thick in CM (1:4) for laying floor finishes complete all as specified and directed.

Material and labour for laying 80mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as specified and directed.

Material and labour providing cement concrete type B1 1:2:4 (20mm graded aggregate) copings,kneelers,apex stones, bed plates, kerbs, water troughs and the like including weathering slightly rounded or chamfered angles and throating complete all as specified and as directed.

Material and labour 100 mm thick PCC 1:3:6 type C-2 using 40mm graded stone aggregate for footpath/ hard standing, complete all as specified and as directed.

Material and labour for forming construction (Dummy) joint 65mm deep and 10mm wide and filled with sealing compound Grade A complete all as specified and as directed.

Supply and fixing in repair 110mm dia PVC (SWR) pipe and single socketed in any length with rubber ring joint laid in trenches or in floor etc complete all as specified and as directed.

Material and labour for preparation of old wall surfaces and applying one coat of Super Acrylic emulsion paint of approved brand and colour complete all as specified and directed.

Material and labour for preparation of old wall surfaces and applying one coat of 100% Acrylic exterior emulsion paint of approved brand and colour complete all as specified and directed.

Material and labour for preparation of old decorated surfaces and applying one coat of High Albedo paint having minimum solar reflective index (SRI) 108 (with solar reflectance & thermal emittance tested as per ASTM) C 1549 and ASTM C 1371 respectively), VOC less than 10cc/gm. The coating thickness and the methodology of application shall be strictly as per manufacturer's specifications and as approved by Engineer-in-charge. The contractor shall give guarantee for all the performance of SRI and also the durability of coating, all completed as direction of Engineer-in-charge.

Taking down cement plaster on brick or stone wall including raking out joints, hacking for key, scrubbing down with water etc complete all as specified.

Material and labour for rendering 15 mm thick in CM 1:4 on fair face of brick work or concrete surfaces and finished even and smooth without using extra cement complete all as specified and as directed.

Material and labour for rendering 10 mm thick in CM 1:6 on fair face of brick work or concrete surfaces and finished even and smooth without using extra cement complete all as specified and as directed.

Material and labour for rendering 10 mm thick plaster in cm 1:3 as in ceiling , surfaces finished even & smooth (without using extra cement) complete all as specified and directed.

Material and labour for preparing new plastered surfaces and applying three coat of white wash on ceiling complete all as specified and directed.

Material and labour for Preparation of new plastered surfaces and applying two coats of Oil bound distemper over a coat of 2mm thick wall care putty over a coat of alkaline resistant primer on walls complete all as specified and directed.

Material and labour for Preparation of new plastered surface on wall and applying Two coats of 100% Premium acrylic emulsion paint including priming coat complete all as specified and directed.

Material and labour for Preparation of old painted surfaces of wall and applying a coat of 100% Acrylic exterior emulsion paint of approved brand and colour complete all as specified and directed.

Material and labour for Preparation of old plastered surface on wall and applying Two coats of 100% acrylic exterior emulsion paint of approved brand and colour complete all as specified and directed.

Material and Labour for PCC 1:3:6, type C-2 as in concrete bed to drain pipes including packing under and haunching against the sides of pipes after they are laid and tested for 150 mm dia complete all as specified and directed.

Material and labour for Preparation of old painted surfaces by washing, rubbing, brooming down or steel wire brushing or scraping down and applying one coat of White wash on walls complete all as specified and directed.

Material and labour for Preparation of old painted surfaces by washing, rubbing, brooming down or steel wire brushing or scraping down and applying two coats of White wash on walls complete all as specified and directed.

Material and Labour for PCC 1:3:6, type C-2 as in concrete bed to drain pipes including packing under and haunching against the sides of pipes after they are laid and tested for 200 mm dia complete all as specified and directed.

Material and labour preparation of old decorated wooden surfaces of any description over 10 cm in width or girth and applying one coat on synthetic enamel paint complete all as specified and as directed.

Material and labour preparation of old decorated wooden surfaces of any description over 10 cm in width or girth and applying two coat on synthetic enamel paint complete all as specified and as directed.

Material and labour preparation of old painted steel surfaces of steel of any description not exceeding 10 cm in width or girth and applying one coat on synthetic enamel paint all as specified and as directed.

Material and labour preparation of old painted steel surfaces over 10 cm in width or girth and applying one coat on synthetic enamel paint complete all as specified and as directed.

Material and labour for preparation of old decorated surfaces of wall by washing, rubbing down and stopping of painted surfaces and applying two coats of cement based paint complete all as specified and directed.

Material and labour Writing letters or figures (Block, Roman, Italic or Indian) not exceeding 30 cm high (per cm of height)

Material and labour for 25mm thick PCC 1:2:4 type B0(using 12.5 mm graded aggregate) as in floor complete etc. all as specified and as directed

Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises all as specified and as directed.

Material and labour vitrified tiles light shade 10mm thick joint free (square/rectangular) area of each tile not exceeding 0.36 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15 mm thick screed bed in CM 1 :4 complete all as specified and directed.

All as per item No 33 above, but on vertical surface over and including 10 mm thick screed bed in CM 1 :3 set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

Material and labour for Granite (of any type) tiles 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing over 15 mm thick screed bed in CM 1 :4 etc complete all as specified and directed.

Material and labour 20mm thick Granite (of any type) tiles machine cut, in skirting/ dado laid over cement screed and jointed with grey cement slurry, and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing over 10 mm thick screed bed in CM 1 :3 complete all as specified and directed.

Material and labour for non skid joint free ceramic coloured tiles 7 to 8 mm thick (square / rectangular) area of each tile exceeding 0.11 sqm but not exc 0.18 sqm in floors over and including 15 mm thick screed bed in CM 1 :4 set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

Material and labour for joint free Glazed ceramic coloured tiles in vertical surface 450x350x7mm thick over 10 mm thick screed bed in CM 1 :3 set and jointed in neat cement slurry and pointed in white or coloured cement to match etc complete all as specified and directed.

Cutting chases, pinning in, making good to facing where required & pointing in CM 1:3 for conc. water tubing and like not exc 10CM girth in brick wall etc complete all as specified and as directed

(a) 15 mm dia bore

(b) 20 mm dia bore

Taking down shutters of any description size not exc 1 Sqm each for taking into credit complete all as specified and as directed.

Taking down shutters of any description size exc 1 Sqm and not exceeding 2.0 Sqm each for taking into credit complete all as specified and as directed.

Taking down shutters of any description size not exc 1 Sqm each and refixing in the same opening including necessary repairs complete all as specified and as directed.

Taking down shutters of any description size exc 1 Sqm and not exceeding 2.0 Sqm each and refixing in the same opening including necessary repairs complete all as specified and as directed.

Supply and fixing solid PVC frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with M.S. square tube, Supply and fixing in opening as per specification & drawing etc complete all as specified and as directed

Supply and fixing factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails, MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail lock rail & bottom rail on either side and as gap insert for top rail bottom rail, paneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement Supply and fixing in the frame at site as per specification & drawing etc complete all as specified and as directed

Material and labour Anodised powder coated aluminium frame (minimum thickness of powder coating 50 micron of approved colour) for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified

Supply and fixing Sheet glass 5.5 mm thick , ordinary quality and glazing with beads fixed with metal panel in square in n exc 0.5 sq.m in each pane including hacking out old /broken glass complete all as specified and directed

Supply and fixing Aluminium alloy wire cloth, 0.45mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminium wire staples complete all as specified and directed

Supply and fixing in repair Aluminium alloy wire cloth, 0.45mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminium wire staples complete all as specified and directed

Supply and fixing aluminium alloy anodised 100mm Butt hinges complete all as specified and directed.

Supply and fixing in repair aluminium alloy anodised 100mm Butt hinges complete all as specified and directed.

Supply and fixing aluminum anodized barrel tower bolts of extruded section 200 mm long complete all as specified and as directed

Supply and fixing in repair aluminum anodized barrel tower bolts of extruded section 200 mm long complete all as specified and as directed

Supply and fixing aluminum handles cast type anodized 125 mm size complete all as specified and as directed

Supply and fixing in repair aluminum handles cast type anodized 125 mm size complete all as specified and as directed

Supply and fixing in repair 500 ltr capacity or rotational moulded polyethylene water storage tank (cylindrical vertical with closed top) ISI marked or make specified, two layered construction hoisted and fixed in position complete all as specified and as directed

S & F in repair 20mm dia Gun metal gate valve with iron wheel head, screwed both ends for iron pipe complete all as specified and as directed.

Supply and fixing in repair 20mm bore ball valve high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed (minimum weight 210gms) complete all as specified and directed

Supply and fixing in repair vitreous China wash down water closet pan (pedestal pattern) white, incl. P or S Trap , connection to drain and flushing pipe complete all as specified and as directed.

Supply and fixing in repair plastic seat cover, closed pattern with flat bottom, complete all as specified and as directed.

S & F in repair flush valve for Cera Calibre Model FV2204T complete all as specified and as directed.

S & F in repair inlet valve for Cera Calibre Model IV2204T complete all as specified and as directed.

Supply and

fixing in repair PVC connections 150 mm size with PTMT nuts of length 450mm etc complete all as specified and as directed

Supply and fixing in repair 15mm fancy type bore cast copper alloy chromium plated angle cock with long shank & cup concealed type complete all as specified and as directed.

Supply and fixing in repair 15mm bore fancy type chromium plated bib tap cast copper alloy with crutch or butterfly handle, screwed for iron pipe or for brass ferrule etc complete all as specified and as directed

Supply and fixing in repair brass chromium plated tubular towel rail 20mm dia ‘D’ type 60 Cm long between flanges aluminium anodised all as specified and as directed.

Supply and fixing in repair 75mm dia PVC (SWR) pipe and single socketed in any length with rubber ring joint laid in trenches or in floor etc complete all as specified and as directed

Supply and fixing in repair 110mm dia PVC (SWR) pipe and single socketed in any length with rubber ring joint laid /fixed in walls etc complete all as specified and as directed

Supply and fixing 75mm bore PVC (SWR) bend in any radius with access door complete all as specified and as directed

Supply and fixing 110mm bore PVC (SWR) bend in any radius with access door complete all as specified and as directed

Supply and fixing in repair fancy type CP Health Faucet (ABS with SS tube 1 Mtr tube and hook complete all as specified and directed.

Material and labour for 75mm thick cement concrete type C-2, ( 1:3:6) (40 mm graded aggregate) as in plinth protection finished even and smooth without using extra cement complete all as specified and directed.

Supply and fixing in repairs CP brass chromium plated shower rose 125 mm size fixed to 15mm pipe of revolving type complete all as specified and directed.

Supply and fixing in repairs 15mm Stop valves, (concealed type) fancy type, chromium plated cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.

Disconnecting existing tanks, setting aside (of lowering if required) for repairs, cleaning etc and hoisting if required reconnecting and refixing in position of capacity exc 250 & n exc 500 liters including cleaning and removing the water scale and dirt from the water tank, all as specified and as directed.

Supply and fixing in repairs PVC water tank covers/Lit any type for suitable for 500 and 1000 Litre tanks all as specified and as directed.

Material and labour for greasing , servicing and necessary repair including welding to steel rolling shutters gear/ manual operated type complete all as specified and as directed.

Supply and fixing in repair PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement complete all as specified and as directed.

Supply and fixing in repair PVC (SWR) floor trap, plain with grating 75mm dia including jointing with solvent cement complete all as specified and as directed.

Supply and fixing in repairs vitreous china ware wash basins, white of size 550x400mm, including cutting for and pinning in ends of brackets or erecting stand but exclusive of fixing of supply and waste pipe, taps, chain and plug and porcelain stopper but inclusive of brackets complete all as specified and directed.

Demolition Brick Work/stone masonry built in cement mortar or cement lime mortar, complete all as specified and as directed.

Material and labour for brick work with sub class 'B' old size built in CM 1:6, straight or curved on plan exc 6m mean radius on plan complete all as specified and directed.

All as per item No.85 above, but except bricks.

Dismantling Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets complete all as specified and directed.

Providing and fixing of Armstrong Mineral Fibre Acoustical Suspended ceiling system with Fine Fissured (Bevelled TEGULAR) Edge Tiles with Armstrong 15mm exposed GRID. The tiles should have humidity resistance (RH) of 99%, NRC 0.6, Light Reflectance > 85%, Thermal conductivity k = 0.052-0.057w/m K, colour white, Fire Performance UK class 0 / class 1 (BS 476 pt-6&7) in module size of 600 x 600 x 16 mm, suitable for green building application, with recycled content of 31%. The tiles shall be laid on Armstrong superfine 32 with 15 mm wide T section flanges colour white having rotary stitching on all T sections i.e. the main runner, 1200 mm & 600 mm cross tees with a web height of 32 mm and a load carrying capacity of 7.5kg/m2 & minimum pull out strength of 100 kgs. The 'T' section have galvaning of 90grams per M2 and need to be installed with suspension system complete all as specified and as directed.

Taking down stainless steel railing and refixing in the same opening including necessary repairs complete all as specified and as directed.

Supply and fixing in repair Roller blinds for window cover made of polyester fabric rolls into aluminium tube located at top of blind complete all as specified and directed.

Material and labour for Walling of random rubble masonry uncoursed built in cement mortar 1:6 complete all as specified and directed.

All as per item no 91 above but with old stone masonry (Except stone) complete all as specified and directed.

Raking out joints / pointing to random rubble or polygonal rubble uncoursed or brought up to courses built in cement mortar complete all as specified and directed.

Material and labour for Keyed pointing to random rubble uncoursed masonry in CM 1:4 complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.

S& F Mild steel angle iron cut to shape as directed drilling holes notching for wire as in posts and struts in fencing etc including all necessary cutting and welding etc and for similar work complete all as specified.

Supply and fixing Framed work such as in grills, gratings with ends of bar shouldered and/ or riveted forged into spikes including welding all as specified & directed.

Supply and fixing in repairs Galvanized 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacing and straining and fixing to any type of standard rails straining bolts including securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc complete all as specified and directed.( each line of wire to be measured)

Dismantling of concertina coil dia 850mm to 1200mm or any size or description complete all as specified and directed.

Supply and fixing of Razor blade galvanised barbed concertina coil 1.05m dia coil stretched to a length of 10m to 12m to achieve 950mm dia as in fencing including supply and fixing with special galvanised fasteners such as 'J' clips 'C' clips complete all as specified and directed.

Demolition of cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed.

Dismantling of fencing wire mesh any type and size complete all as specified and directed.

Dismantling posts or struts (wood, steel or R.C.C.) any section, including taking out embedded portion and making good disturbed ground complete all as specified and directed.

Excavation in post holes (or similar holes) each n exc 0.5 cum and getting out, soft loose soil and removing surplus soil to a distance n exc 50m and making good surface complete all as specified and directed.

Material and labour for cement concrete type C-2, 1:3:6 (using 40mm graded stone aggregate) in foundation and filling concrete for columns, fencing posts etc complete all as specified and directed.

Supply and fixing for mild steel screw bolts (machine cut) with hexagonal or square heads at one end and screwed the other or screwed both ends each screwed end to be fitted with washers and one hexagonal or square not exceeding 5 cm long and diameter

of neck 5 to 10mm complete all as specified and directed.

Supply and fixing Chain Link fencing of 50mm x 50mmx 3.90 mesh size including fixing line wires, any mesh, size and type to any type of standards, rails, straining bolts, by providing binding wire complete all as specified and directed.

Material and labour preparation of new surface of iron/steel area over 10 cm in width or girth and applying two coat of synthetic enamel paint over a coat of red oxide complete and all as specified and as directed

Material and labour for Preparation of old or previously untreated surface and applying two coats of synthetic enamel paint on steel surfaces complete all as specified and directed.

Material and labour for 100mm thick PCC 1:2:4 type B2(using 40 mm graded aggregate) as in floor complete etc. all as specified and as directed

Material and labour for 35mm wide glass dividing strips, 3mm thick complete all as specified and directed.

Demolition of reinforced cement concrete in any position not other wise specifically provided complete all as specified and directed.

Material and labour Pre cast cement concrete type B-1 1:2:4 (using 20mm graded aggregate) as in cover slab and similar nature of works including necessary form works complete all as specified and directed.

Material and labour mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

Cleaning and removing of blockage of any type of sludge /effluent etc in sewage pipe line of 150mm internal dia from manhole and well flushing with water manually with the help of green bamboo or any other mechanical method as deemed fit including taking off and replacing manhole cover etc. all complete as directed (Depth of manhole n.exc 1.50 Mtr).

All as per item No.115 above but with depth of manhole exc. 1.5 m to 3.00 m.

Cleaning blockages from Nahani trap to Gully trap by Roding etc and cleaning the sludge from NT taking up and refixing the grating in CM (1:3) including testing by pouring the water until smooth flow, complete all as directed. Note:- Each time cleaning of blockage shall be paid and measured separately.

Cleaning of blockages from Gully trap to 1st Manhole length of sewer line not exceeding 5m by roding etc and cleaning all sludge from Gully trap to 1st Manhole including pouring water until the smooth flow and necessary earth work and disposed of sludge etc complete all as directed. Note:- Each time cleaning of blockage shall be paid and measured separately.

Cleaning blockages from water closet including cleaning the soil pipe by removing the access door cover in the bend and refixing it after cleaning the pipe, pouring water until smooth flow etc. complete all as specified and as directed. Note:- Each time cleaning of blockage shall be paid and measured separately.

Cleaning blockages from wash hand basin/sink including cleaning the soil pipe by removing the access door cover in the bend and refixing it after cleaning the pipe, pouring water until smooth flow etc. complete all as specified and as directed. Note:- Each time cleaning of blockage shall be paid and measured separately.

Material and labour for PCC 1:4:8 using 40mm graded stone aggregate as in bedding concrete in manholes complete all as specified and directed.

Excavation in trenches n.exc.1.5 metre wide and n.exc 1.5 metre depth and getting out in soft/loose soil as in foundation complete all as specified and as directed.

Returning filling in trenches including spreading levelling watering and well ramming in layers not exc.25 cms in soil complete all as specified and as directed.

Removing excavated material / soil to a distance n.exc 50m away and depositing where as directed at a level n.exc 1.5m above the starting point, complete all as specified and as directed.

Demolition and breaking up drain pipe salt glazed or AC or reinforced concrete and set in cement mortar 150 mm dia complete all as specified and as directed.

Demolition and breaking up drain pipe salt glazed or AC or reinforced concrete and set in cement mortar 200 mm dia complete all as specified and as directed.

Supply and fix 150mm dia reinforced concrete pipes, class NP2, laid and jointed with collars complete all as specified and as directed.

All as per item No.127 above, but 200 mm dia.