SPECIAL REPAIR TO BLUILDING NO P 61 AT TRAINING BATTALION 2 BOMBAY ENGINEER AND CENTER DIGHI CAMP UNDER AGE B R P IN GE C KIRKEE

Amount

Taking down chowkats or frames with shutters (without taking off shutters from the frames) area n. exc. 1.5 sqm each and removing from site complete all as specified and as directed.

Taking down chowkats or frames with shutters (without taking off shutters from the frames) area exceeding 1.5 sqm and not exceeding 4 sqm each and removing from site complete all as specified and as directed.

Taking down shutters exceeding 1.00 Sqm but not exceeding 2.00 Sqm each and removing from site complete all as specified and as directed.

S & F Solid PVC Door Frame of size 50mm X 47mm made out of 5mm plain colour PVC sheet reinforced with M S Square tube,supplying and fixing in opening as per manufacturers instructions & drawing shown on Page No. 160 of SSR 2010 part II complete all as specified and as directed.

S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame as per manufacturer's instructions and as directed by Engineer-in-Charge. complete all as specified and as directed.

S & F Pressed steel door frame of size 105 x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc, complete all as specified and as directed.

S & F 30mm thick IInd class HW glazed and skeleton shutter, open rebated and prepared to receive glass, gauze, etc. (without such bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc size of shutters as specified in SSR-I, Section 8.24(a) supplied and fitted to chowkats complete all as specified and as directed.

S&F 35mm thick plain framed, panelled shutter (two panel) Factory made with lock rail and panel of 9mm B.W.P. commercial ply. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated supplied and fitted to chowkats complete all as specified and as directed.

S&F in repairs steel windows double shutters, one glazed and other flyproof shutter, side hung, friction type hinges with steel handles and steel peg stay complete with glazing bars dovetailed or welded complete including 12mm square guard bars as specified in relevent IS complete all as specified and as directed.

Supplying and fixing (in repairs) steel ventilators with top hung shutter including hinges, steel peg stay complete all as specified and as directed.

S&F butt hinges medium weight cold rolled mils steel 100mm long complete all as specified and as directed.

S&F butt hinges midium weight cold rolled mild steel 125mm size complete all as specified and as directed.

S&F aluminium anodised barrel tower bolts of extruded section 100mm long complete all as specified and as directed.

S&F aluminium anodised barrel tower bolts of extruded section 150mm long complete all as specified and as directed.

S&F aluminium alloy, anodised, sliding door bolt with hasp, staple and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy 300mm long complete all as specified and as directed.

S&F aluminium alloy anodised handle, cast type 150mm long complete all as specified and as directed.

S&F aluminium alloy anodised handle, cast type 100mm long complete all as specified and as directed.

M&L for running welding for fixing hinges in repair work complete all as specified and as directed.

Hacking out old broken glass ( any thickness size ,quality or description ) from wooden/Steel frames glazed with putty or fixed with beads complete all as specified and as directed.

M & L for 3 mm thick plain sheet glass ordinary quality and glazing with oil putty or wooden beads in squares not exceeding 0.50 sqm in each pane complete all as specified and as directed.

M & L for 3 mm thick sheet frosted/pin headed glass ordinary quality and glazing with oil putty or wooden beads in squares n.exc 0.50 sqm in each pane complete all as specified and as directed.

S & F Galvanised mild steel wire cloth, 0.63mm nominal dia of wire and average width of apertune 1.40 mm and fixed with tinned tacks ,or galvanised wire staples including necessary beading complete all as specified and as directed.

S & F in repair Galvanised mild steel wire cloth, 0.63mm nominal dia of wire and average width of apertune 1.40 mm and fixed with tinned tacks ,or galvanised wire staples in steel windows/ventilators or in fly proof shutter including necessary beading complete all as specified and as directed.

M&L for preparation of new wooden surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coat synthetic enamel paint over one coat of pink primer complete all as specified and as directed.

M&L for preparation of new steel surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coat synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and as directed.

M&L for rendering 10 mm thick cement plaster in CM 1:3 mixed with WPC @ 3% by weight of cement on brick or concrete surfaces as in sunken portion complete all as specified and as directed. Note:- water proofing compound shall be measured and paid separately.

M&Lfor polythene film, 150micron thick, laid over and including a coat of bitumen primer@ 0.5 kg per sq.m complete all as specified and as directed.

Supply only integral water proofing compound complete all as specified and as directed.

Dismantling of stone slab and tiles of any description or thickness in cooking platform laid bedded and pointed in any mortar and removing debries outside the MD complete all as specified and as directed.

Dismantling of floor hearth or wall tilling including cement mortar bedding and removing debries outside the MD complete all as specified and as directed.

M&L, 50mm thick Cement concrete type D1, 1:4:8 mix (using 20mm graded stone aggregates as in sub base or levelling course in floors complete all as specified and as directed.

M & L for glazed ceramic coloured tiles (300x200mm) x 7 mm thick in Dado/Skirting set and jointed in neat cement slurry and pointed in white or coloured cement to match coloured tiles over and including 10 mm thick backing coat in CM (1:4) complete all as specified and as directed.

M & L for Non skid ceramic coloured tiles 7 to 8mm thick (square or rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set in neat cement slurry and pointed in coloured cement to match coloured tiles over and including 15mm thick screed bed in CM (1:6) complete all as specified and as directed.

M & L for machine cut cuddappa stone slab 30 to 40mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing over and including 15mm thick screed bed in CM 1:4 complete all as specified and as directed.

Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water etc and removing debries outside the MDcomplete all as specified and as directed.

M&L for 10 mm thick rendering in CM 1:3 on concrete surfaces as on ceiling/Chajjas at any height and finished even and smooth without using extra cement and applying three coats of white wash including preparation of new plastered surfaces complete all as specified and as directed.

M&L for rendering 10mm thick on fair faces of brick work or concrete surfaces in CM 1:4 finished even and smooth without using extra cement complete all as specified and as directed.

M&L for rendering 15mm thick on fair faces of brick work or concrete surfaces in CM 1:6 finished even and smooth without using extra cement complete all as specified and as directed.

M&L for preparation of new plastered surfaces of wall and applying two coats of cement based paint (any tint) on walls complete all as specified and as directed.

S & F in repairs water closet (Squatt Pattern) complete including provision of cement concrete 1:4:8 type D2 using 40 mm graded brick aggregate "Orissa pattern" of size 580 x 440mm white with integral foot rests (excluding flush pipe or flushing cisterns) including connection to trap and flushing pipe anti syphonage pipe etc. and making good to floor complete all as specified and as directed.

S & F in repairs PVC High/Low level flushing cistern 10 litres capacity including all fittings i.e float valve, syphon, flush pipe,brackets complete all as specified and as directed.

S & F in repairs viterious china wash basin white flat back size 550 x 400 mm excluding taps waste chain and plug and porcelain stopper but including necessary brackets CP wastes and other fittings complete all as specified and as directed.

S & F PVC connections 15mm dia with brass check nut on both ends and washers 450mm long including taking down old complete all as specified and as directed.

S & F in repairs pillar taps chromium plated cast copper alloy with capstan heads screwed down high pressure with or without lettered ( Hot or cold) with long screwed shanks and fly nuts screwed for iron pipes 15 mm complete all as specified and as directed.

S& F in repairs bib taps CP brass fancy type with crutch or butterfly handle screwed down screwed for iron pipe for brass ferrule 15 mm dia complete all as specified and as directed.

S&F in repair stop valves cast copper alloy, screwed down, high pressure with butterfly handle, screwed both ends for iron pipe or for unions 15mm bore complete all as specified and as directed.

S & F Brass Chromium Plated Shower Rose of size 125mm with or with out swivel joints fixing to steel pipes complete all as specified and as directed.

Taking down or up steel tubing and connections for 15 mm bore of pipe complete all as specified and as directed.

Taking down or up steel tubing and connections for 20 mm bore of pipe complete all as specified and as directed.

S&F 15mm bore GI tubing ISI marked of size 'medium grade' with and including all fittings such as bends, socket, tees, elbows, unions, barrel, nipple, plugs, etc fixed to walls, ceiling or laid in floors complete all as specified and directed.

S&F 20mm bore GI tubing ISI marked of size 'medium grade' with and including all fittings such as bends, socket, tees, elbows, unions, barrel, nipple, plugs, etc fixed to walls, ceiling or laid in floors complete all as specified and directed.

Dismantling water tanks (RCC hume pipe / PVC etc.) including all disconnections for capacities:- UP TO 2000 ltrs setting aside (or lowering if required) and hoisting if required, reconnecting or removing to store of credit to the contractor complete all as specified and as directed.

Supply and fix 2000 litres capacity rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) double layered 'ISI' marked, hoisted & fixed in position with existing inlet, outlets & provision of washouts, vent pipe, nipples of suitable size hoisted and fixed in position all as specified in SSR part-I (2009)complete all as specified and as directed.

S&F in repair 20mm bore, gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe complete all as specified and as directed.

S&F in repair ball brass valve, high pressure, with ploythelene float and flynut complete, screwed for iron pipe or brass ferrule 20 mm bore complete all as specified and as directed.

S&F in repair Cast iron floor trap, with grating 75mm including jointing to wast pipe fixed in cement concrete type B1 (1:2:4) ,in repairs and including water leak proof treatment complete all as specified and as directed.

S&F in repair Cast iron Nahani trap, with grating 100mm including jointing to wast pipe fixed in cement concrete type B1 (1:2:4) ,in repairs and including water leak proof treatment complete all as specified and as directed.

S&F in repair sand Cast Soil, waste and vent pipe 75mm bore in any length with or without ears, with cement joints, laid in floors complete all as specified and as directed.

S&F in repair sand Cast Soil, waste and vent pipe 100mm bore in any length with or without ears, with cement joints, laid in floors complete all as specified and as directed.

S&F in repair 100mm cast iron sanitary connection P branch with branch 375 to 450mm long to fit WC out let joint to be sealed with lead joint complete all as specified and as directed.

M & L Water proofing treatment to RCC roof slab, walls, chhajjas etc, shall be carried out as specified below and as directed by Engineer-in-Charge. (a) Removing old tar felt, all loose dirt, old roof tiles, cement plaster cleaning the concrete surfaces including removal & cleaning of vegetation, fungus, moss small trees etc. from the roof top with wire brushes including removal of debris to a distance not exceeding 1.5 KM (b) Screed bed or bedding layer of mortar 15 mm thick in cement mortar 1:4 as in roof slab with mixing of WPC and surface finished even and smooth without using extra cement. (Note: Water Proofing Compound shall be measured and paid separately). (c) Preparing plastered surfaces of roof slab, walls, chhajjas etc, by brooming with broom sweeping free from dirt dust etc & evenly applying a coat of approved cold bituminous primer @ 0.25 ltr /Sqm conforming to IS:3384-1986 of area complete all as specified. (c) Laying APP based polymeric membrane minimum weight not less than 3.5kg/sqm and minimum 3mm thick reinforced with polyester non woven fabric (wt. not less than 150 gms/sqm) with laps & overlaps as specified & joints sealed and applied complete by torch application method all as specified & directed by Engr-in-Charge. Carrying out test by flooding water for 24 hrs for leakage & seepages and rectifying the same to the entire satisfaction of GE. (d) Finally applying a coat of solar reflective bituminous aluminium paint @ 0.15 ltr/sqm on the top of membrane surfaces complete all as specified & as directed by Engr in Charge. Note : The rate includes all necessery temporary arrangements to be made by contractor for ponding test and relevant guarantee period of Ten years.

Taking down cement or cement lime plaster, any description on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc. and removing the debris outside MD land complete all as specified and as directed.

M& L for of 5 mm thick rendering in CM 1:3 on concrete surfaces as on ceiling/Chajjas at any height and finished fair and even and applying two coats of white wash including preparation of new plastered surfaces complete all as specified and directed.

M&L for preparation of old undecorated surfaces of walls by washing, rubbing down and stopping of distempred and painted surfaces including complete removal of existing treatment and applying two coats of oil bound distemper over a coat of primer complete all as specified and as directed.

M &L for preparation of old painted wooden surfaces of any description not otherwise described over 10cm width or girth and applying one coat of synthetic enamel paint any tint complete all as specified and as directed.

M & L for preparation of old undecorated surfaces of walls washing rubbing down and stopping of distempered and painted surfaces including complete removal of existing treatement and applying two coats of cement based paint (any tint) over a coat of alkali resistant primer on walls complete all as specified and as directed.

M&L for non skid ceramic coloured (colour and shade as approved) tile of size 40x400x7mm thick as in floors set and jointed in neat cement slurry over and including 15mm thick screed bed in CM (1:6) and pointed in white/coloured cement with pigment to match the colour of tiles complete all as specified and as directed.

M&L for non skid ceramic coloured (colour and shade as approved) tile of size 40x400x7mm thick on vertical surface as in skirting/dado etc length of each unit ot less than 400mm, set and jointed in neat cement slurry over and including 10mm thick screed bed in CM (1:3) and pointed in white/coloured cement with pigment to match the colour of tiles complete all as specified and as directed.

M&L for preparation of old painted steel surfaces of any description not otherwise described over 10cm width or girth and applying one coat of synthetic enamel paint any tint complete all as specified and as directed.

M & L for preparing new plastered surfaces of wall and applying three coats of white (Lime) wash on ceiling complete all as specified and as directed.

M &L for preparation of old painted wooden surfaces of any description not otherwise described over 10cm width or girth and applyinbg one coat of synthetic enamel paint any tint complete all as specified and as directed.

M & L for surface point wiring with two single core PVC insulated unsheathed 1100 volt grade multi stranded FRLSH Copper conductor cable of size 1.5 sqmm (Nominal area) drawn in and including PVC casing caping of required size with all fittings and accessories alongwith one single core green colour PVC insulated 1100 volt grade multi stranded FRLSH Copper conductor cable of size 1.5 sqmm as earth lead and connected to earth dolly for one light point or one fan point or one call bell point controlled by one, one way switch including PVC switch board of required size or 3mm thick hylam sheet screwed with 04 nos cadmium coated screws & cup washer on existing MS concealled box for mounting of switch, regulators or bell push and casing caping terminal box for mounting ceiling rose/ holders etc. including dismantling and taking down old unserviceable point wiring and making good to disturbed surfaces complete all as specified and as directed.

M & L for surface point wiring with two single core PVC insulated unsheathed 1100 volt grade multi stranded FRLSH Copper conductor cable of size 1.5 sqmm (Nominal area) drawn in and including PVC casing caping of required size with all fittings and accessories alongwith one single core green colour PVC insulated 1100 volt grade multi stranded FRLSH Copper conductor cable of size 1.5 sqmm as earth lead and connected to earth dolly for one 5 amps socket point independent board including PVC switch board of required size or 3mm thick hylam sheet screwed with 04 nos cadmium coated screws & cup washer on existing MS concealled box for mounting of switch, socket including dismantling and taking down old unserviceable point wiring and making good to disturbed surfaces complete all as specified and as directed.

M & L for surface point wiring with two single core PVC insulated unsheathed 1100 volt grade multi stranded FRLSH Copper conductor cable of size 1.5 sqmm (Nominal area) drawn in and including PVC casing caping of required size with all fittings and accessories alongwith one single core green colour PVC insulated 1100 volt grade multi stranded FRLSH Copper conductor cable of size 1.5 sqmm as earth lead and connected to earth dolly for one 5 amps socket point on same board with other switches including dismantling taking down old unserviceable point wiring and making good to disturbed surfaces all as specified and directed.

M & L for surface point wiring with two single core PVC insulated unsheathed 1100 volt grade multi stranded FRLSH Copper conductor cable of size 1.5 sqmm (Nominal area) drawn in and including PVC casing caping of required size with all fittings and accessories alongwith one single core green colour PVC insulated unsheathed 1100 volt grade multi stranded FRLSH Copper conductor cable of size 1.5 sqmm as earth lead and connected to earth dolly for one two way light point controlled by two, two way switches including PVC switch board of required size or 3mm thick hylam sheet screwed with 04 nos cadmium coated screws & cup washer on existing MS concealled box for mounting of switch etc. including dismantling taking down old unserviceable point wiring and making good to disturbed surfaces complete all as specified and as directed.

M & L for surface point wiring with two single core PVC insulated unsheathed 1100 volt grade multi stranded FRLSH Copper conductor cable of size 2.5 sqmm (Nominal area) drawn in and including PVC casing caping of required size with all fittings and accessories alongwith one single core green colour PVC insulated unsheathed 1100 volt grade multi stranded FRLSH Copper conductor cable of size 2.5 sqmm as earth lead and connected to earth dolly for one 16amps socket (Power) point on independent board including PVC switch board of required size or 3mm thick hylam sheet screwed with 04 nos cadmium coated screws & cup washer on existing MS concealled box for mounting of switch, socket complete all as specified and as directed.

M & L for submain wiring with two single core PVC insulated unsheathed 1100 volt grade multi stranded FRLSH Copper conductor cable of size 2.5 sqmm (Nominal area) drawn through in and including PVC casing caping/PVC conduit size with all fittings and accessories alongwith one single core green colour PVC insulated unsheathed 1100 volt grade multi stranded FRLSH Copper conductor cable of size 2.5 sqmm as earth lead and connected to earth dolly including dismantling and taking down old unserviceable wiring and making good to disturbed surfaces all as specified and directed. NOTE: (a) Two run of cable with one run of earth wire and one run of casing capping/conduit will be measured as one length.

M & L for surface sub main wiring with two single core PVC insulated unsheathed 1100 volt grade multi stranded FRLSH Copper conductor cable of size 6.0 sqmm (Nominal area) drawn through in and including PVC casing caping/PVC conduit size with all fittings and accessories alongwith one single core green colour PVC insulated unsheathed 1100 volt grade multi stranded FRLSH Copper conductor cable of size 6.0 sqmm as earth lead and connected to earth dolly including dismantling and taking down old unserviceable wiring and making good to disturbed surfaces all as specified and directed. NOTE: (a)Two run of cable with one run of earth wire and one run of casing capping/conduit will be measured as one length.

M & L for surface sub main wiring with two single core PVC insulated unsheathed 1100 volt grade multi stranded FR Copper conductor cable of size 10.0 sqmm (Nominal area) drawn through in and including PVC casing caping/PVC conduit size with all fittings and accessories alongwith one single core green colour PVC insulated unsheathed 1100 volt grade multi stranded FR Copper conductor cable of size 10.0 sqmm as earth lead and connected to earth dolly including dismantling and taking down old unserviceable wiring and making good to disturbed surfaces all as specified and directed. NOTE: (a)Two run of cable with one run of earth wire and one run of casing capping/conduit will be measured as one length.

M & L for surface sub main wiring with four single core PVC insulated unsheathed 1100 volt grade multi stranded FRLSH Copper conductor cable of size 10.0 sqmm (Nominal area) drawn through in and including PVC casing caping/PVC conduit size with all fittings and accessories alongwith two single core green colour PVC insulated unsheathed 1100 volt grade multi stranded FRLSH Copper conductor cable of size 10.0 sqmm as earth lead and connected to earth dolly including dismantling and taking down old unserviceable wiring and making good to disturbed surfaces all as specified and directed. NOTE: (a) Four run of cable with two run of earth wire and one run of casing capping/conduit will be measured as one length.

S&F 5 Amp switch piano type single pole one way including dismantling and taking down unserviceable switches complete all as specified and as directed.

S&F 5 Amp switch piano type single pole two way including dismantling and taking down unserviceable switches complete all as specified and as directed.

S&F bell push piano type one way 240 volt including dismantling and taking down unserviceable bell push complete all as specified and as directed.

S&F socket flush type 6 amps, 5 pin, 230v including dismantling and taking down unserviceable socket complete all as specified and as directed.

S&F switch socket combination multipurpose 2-in-1 flush type 3 pin 16 amps and 3 pin 6 amps, 230v including dismantling and taking down unserviceable switch socket complete all as specified and as directed.

S&F lamp Holder insulated body with back plate for batten fitting including dismantling and taking down unserviceable lamp holder complete all as specified and as directed.

S&F LED lamp 12 watt, CDL, B-22 cap, (Pin type), 230V, PF-0.95 (min) including dismantling and taking down unserviceable lamp complete all as specified and as directed. Make-HPL/Havells/CG/Bajaj/ Philips as approved by GE.

S&F ceiling rose surface Bakelite three terminal including dismantling and taking down unserviceable ceiling rose complete all as specified and as directed.

S&F bell electric AC 240 volt, 50 HZ. including dismantling and taking down unserviceable bell complete all as specified and as directed.

S&F flush type electronic fan regulator with 5 step type,120 W, AC 240 Volts, 50 Hz including dismantling and taking down unserviceable fan regulator complete all as specified and as directed.

S&F MCB, Single Pole, 6 to 32 amps, 240 Volts, 10 KA breaking cap, ‘’C” curve including dismantling and taking down unserviceable MCB complete all as specified and as directed. MAKE- Cat Part No- 4085-87 to 4085-95 of Legrand or equivalent of Schneider/ABB as approved by GE.

S&F MCB, Single Pole and Neutral 6 to 32 amps, 240 Volts, 10 KA breaking cap, ‘’C” curve including dismantling and taking down unserviceable MCB complete all as specified and as directed. MAKE- Cat Part No- 4086-09 to 4086-17 of Legrand or equivalent of Schneider/ABB

S&F MCB, Four Pole 16 KA, C curve, 40 to 100 amps, 415 Volts including dismantling and taking down unserviceable MCB any type complete all as specified and as directed. MAKE- Cat Part No- 4087-92 to 4087-94 of Legrand or equivalent of Schneider/ABB as approved by GE.

S&F MCB distribution board, IP 43 protection, Double door, metal enclosure, SPN, 230 Volts, 8 way including dismantling and taking down unserviceable MCB DB complete all as specified and as directed. MAKE- Cat Part No- 6077 11 of Legrand or equivalent of Schneider/ABB as approved by GE.

S&F Vertical MCB distribution board, as MCCB incomer, IP 43 protection, Double door, metal enclosure, TPN, 415 Volts, 6 way including dismantling and taking down unserviceable MCB DB complete all as specified and as directed. MAKE- Cat Part No- 5077 20 of Legrand or equivalent of Schneider/ABB as approved by GE.

S&F Metal plug and socket board with MCB SP 20 amp, 16 KA including dismantling and taking down unserviceable metal plug complete all as specified and as directed. MAKE- Cat Part No- 6078-41 of Legrand or equivalent of Schneider/ABB as approved by GE.

S&F Lumino LED surface mounting light fitting square type product code HPLLEDPR15(WW)SS of HPL along with fixtures, 15 Watts including dismantling and taking down unserviceable fitting complete all as specified and as directed. Make cat part no.HPLLEDPR15(WW)SS of HPL or equivalent of Philips or Crompton Greaves or Wipro or LUKER as approved by GE

S&F bright LED T5 tube light fitting complete 10 watts product codeHPLLED T5PC10WW including dismantling and taking down unserviceable fitting complete all as specified and as directed. Make :- Cat part no.eHPLLED T5PC10WW of HPL or equivalent of Philips or Crompton Greaves or Wipro or LUKER as approved by GE

S&F LED bulk head along with fixtures, 10Watts product code HPLLEDPCBH10WCW of HPL including dismantling and taking down unserviceable bulk head fitting complete all as specified and as directed. Make:- Cat part no.HPLLEDPCBH10WCW of HPL or equivalent of Philips or Crompton Greaves or Wipro or LUKER as approved by GE

S&F LED Bldg security light 20 Watt product code HPLLEDSL02060F of HPL including dismantling and taking down unserviceable fitting complete all as specified and as directed. Make:- Cat part no.HPLLEDSL02060F of HPL or equivalent of Philips or Crompton Greaves or Wipro or LUKER as approved by GE

S&F aries plus LED T5 Fitting 20 watt product code HPLLEDT520WW of HPL including dismantling and taking down unserviceable fitting complete all as specified and as directed. Make:- Cat part no.HPLLEDT520WW of HPL or equivalent of Philips or Crompton Greaves or Wipro or LUKER as approved by GE

Taking down defective ceiling fan of any sweep and depositting to MES store yard and S&F ceiling fan of 1200 mm sweep 5 star rated complete including fan necessary regulator, suitable fan rod with suitable clamp, Fan hook fixed on roof by drilling holes fixing fastener etc., nut, bolt & washers complete all as specified and as directed. Make:- crompton greaves/bajaj/usha as approved by GE

M&L for Rewinding of Ceiling fan 1400 mm /1200 mm sweep after dismanting complete motor assembly, bearings, bushings, removal of burnt copper wire, cleaning of core, inserting proper insulating paper in slots, winding with and as per existing size / turn of super enamelled copper wire, heating, vernishing, replacement of unserviceable bearings / bushings, assembling of rotor and stator unit with capacitor, connecting wire, down rod, bladesincluding one coat of painting and writing MES Number on fan complete with white enamel paint and testing complete all as specified and as directed. Note: 1. Contractor will collect fans from site and bring back to site after repair. Cost of transportation will be inclusive of quoted rate. 2. Spares require for replacement such as bearing, Bushing, capacitor shall be measured and paid separately as supply & Fixing only. 3. Cost of Connector bock and capacitor holder shall be inclusive of the quoted rate.

S&F ball bearing No 6201/6202/6203/6204 complete all as specified and as directed. Make: SKF/Tata/NBC as approved by GE

S&F G.M. Bush for bearing for ceiling fan as per existing pattern complete all as specified and as directed.

S&F capacitor AC for 230 volts 50 Hz of capacity 1.8 Mfd complete all as specified and as directed.

Taking down defective Exhaust fans of any sweep and depositting to MES Store Yard and Supply and fix new Exhaust fan 300 mm Heavy duty including all connection and making suitable hole in brick or concrete walls including making good and matching with sorroundings etc. complete all as specified and as directed.

Taking down defective Exhaust fans of any sweep and depositting to MES Store Yard and Supply and fix new Exhaust fan 450mm Heavy duty including all connection and making suitable hole in brick or concrete walls including making good and matching with sorroundings etc. complete all as specified and as directed.

Supply and laying in trenches or fixed on wall or pole and testing cable XLPE insulated screened pvc bedded galvanised steel strip or wire armoured electric power cable (heavy duty )1100 volts grade with stranded aluminium conductor of size 3.5 core 95 sq mm complete all as specified and as directed.

Supply and laying in trenches, fixed on walls, passing through pipes, jointing and testing of electric cables, PVC insulated, PVC sheathed, galvanised steel strip or wire armoured electric power cables with stranded aluminium conductors 1100 Volts grade (Heavy Duty) of size 3.5 core 35 sq mm complete all as specified and as directed.

Excavation in trenches, not exceeding 1.5 M wide and not exceeding 1.5 M depth n.exc.10 Sqm on plan for laying of pipe etc., and getting out in soft / loose soil complete all as specified and as directed.

Returning, filling in including spreading, levelling, watering and well ramming in layers n.exc 25cm thick complete all as specified and as directed.

Removing of excavated material not exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and as directed.

Material and labour for crushed stone dust as in cushioning to underground cables in trenches including spreading, levelling, hand punning and consolidating complete all as specified and as directed. Note: Punned thickness shall be measured and paid.

M&L for old size sub class "B" bricks as in protection for UG cable laid in trenches complete all as specified and directed.

S&F 50mm bore GI tubing ISI marked of size 'light grade' with and including all fittings such as bends, socket, tees, elbows, unions, barrel, nipple, plugs, etc laid in floors /wall/poles etc. for protection of cable including taking down existing GI tubing complete all as specified and directed.

Supply and installation of solar water heating system flat plate collector type with heat exchanger of 200 litre per day capacity with electrical heating back up including removing unservicable geysers of any capacity and depositing to E/M store yard complete all as specified and as directed.

Supply and fix 500 litres capacity rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) double layered 'ISI' marked, hoisted & fixed in position with existing inlet, outlets & provision of washouts, vent pipe, nipples of suitable size hoisted and fixed in position all as specified in SSR part-I (2009) including 25 mm dia brass float valve and polyethylene ball and including dismantling and removal of existing water tank from site complete all as specified and as directed.

S&F 25mm bore GI tubing ISI marked of size 'medium grade' with and including all fittings such as bends, socket, tees, elbows, unions, barrel, nipple, plugs, etc fixed to walls. Celing or laid in floors complete all as specified and directed.

S&F 20mm bore GI tubing ISI marked of size 'medium grade' with and including all fittings such as bends, socket, tees, elbows, unions, barrel, nipple, plugs, etc fixed to walls. Celing or laid in floors complete all as specified and directed.

Lagging to pipes of internal dia 25 mm all arround with 25 mm thick bonded mineral wool preformed 'SNAPON' pipe sections of density 144 Kg/cum confirming to IS 9842 complete all as specified and as directed.

M&L for Gunmetal globe or gate valves with iron wheel head screwed both ends for iron pipe of bore 25 mm complete all as specified and as directed.

M&L for bib taps cast copper alloy with crutch or butterfly handle, screwed down screwed for iron pipe or for brass ferrule and fixed of bore 20 mm complete all as specified and as directed.

M&L framed brackets of angle or Tees with web and flanges cut into shape,drilled and counter sunk for screws,including bending and welding angles,as necessary gusset plates,rivetting etcn exc confirming to Fe.290 Gde-E-165 complete all as specified and as directed.

M&L PCC type C-2, 1:3:6 using 40 mm graded stone aggregate as in foundations, filling and mass concrete complete all as specified and as directed.

M & L for Earthing complete with galvanised steel pipe electrode, 40mm bore, medium grade, 3 mtr long burried directly and vertically in ground with top edge at ground level after making bore hole of size not less than 300 mm dia and 3.0 Mtr long using suitable mechanical drilling rig (for drilling near the specified bldg), connected with galvanised steel earthing lead of 4mm dia all as shown in Plate No-2, connected to the earthing test point, concrete pit in PCC 1:3:6 type C-2 with RCC precast pit cover slab 400mmx400mmx80mm with handle for lifting made out of 8mm dia MS rod, funnel, wiremesh, 15 mm dia light grade GI tubing for protection of GI wire 4mm dia, charcoal and salt in alternate 150mm thick layers around GI earth pipe, including necessary returning filling in & removal all as specified or indicated in SSR Part-I, including testing to achieve earth resistance value as per IS specification on completion complete all as specified and as directed.

vishalconstruction

L.K.R.TIWARI CONSTRUCTION

Horizon Construction