REPAIR / MAINT OF INTERNAL ELECTRIFICATION AT JNE AREA, ARV, 5071 ASC BN, 5171 ASC BN AND ADJOINING AREA UNDER GE (NORTH) UDHAMPUR

Taking down carefully the existing copper / aluminium point wiring of any size and type by disconnecting from the either terminals complete with switches, sockets, ceiling rose, regulators, bell etc. by unscrewing and removing materials to store for keeping in safe custody for re-use or for taking credit and making good to disturbed surface of walls, floors etc. to match with existing surfaces, complete all as specified and direcetd.

Taking down carefully by unscrewing from boards / outlet boxes fittings and fixture such as LED fittiings and fixtures, bulk head light fitting and LED security light etc, complete all as specified and direcetd.

M&L for point wiring for one light point, controlled by one one way switch 5 Amp with 1.5 Sqmm single core multi standed copper conductor FRLSH insulated and unsheathed heavy duty cable in colour code including continuos earth wire with cable of size 1.5 Sqmm copper conductor flexible FRLS insulated drawn into and including concealed PVC rigid conduit of not less than 25mm dia and 1.5mm wall thickness ISI marked, terminated into annealed steel terminal boxes, flush to surface including 3mm thick hylam brand IS-2036 marked laminated sheet cover for mounting switches, sockets, fan regulators etc. complete all as specified and directed.

All as per serial item No. 3.00 here-in-above but for one fan point.

All as per serial item No. 3.00 here-in-above but for one bell / buzzer point.

All as per serial item No. 3.00 here-in-above but for 3 pin socket outlet 5 Amps on same board.

All as per serial item No. 3.00 here-in-above but for one 5 Amps socket outlet on independent board.

All as per serial item No. 3.00 here-in-above but wire size 2.5 Sqmm to controlled the 3 Pin 5/15 Amps socket outlet on independent board and providing earth continuity wire using PVC insulated, FRLSH 1100 volts grade unsheathed single core multistranded copper conductor cable of size 2.5 Sqmm.

All as per serial item No. 3.00 here-in-above but one light/ fan point, controlled by two way switch.

S&F in replacement of switch piano, flush type, single pole, 5 Amps, one way, complete all as specified and direcetd.

S&F in replacement of socket outlet, two in one, 3/5 Pin, piano type, 5 Amps, flush type, complete all as specified and direcetd.

S&F in replacement of switch socket combination piano type, 5 Pin, 5 Amps, flush type, complete all as specified and direcetd.

S&F in replacement of switch socket combination piano type, 6 Pin, 16 Amps, flush type, complete all as specified and direcetd.

S&F in replacement of flush type bell push, 5/6 Amps, complete all as specified and direcetd.

S&F in replacement of ceiling rose, 3 terminal, PVC / polycarbonet, isolated body, complete all as specified and direcetd.

S&F in replacement of electric bell, ding dong type, AC 230/240 volts grade, single pole, complete all as specified and direcetd.

S&F in replacement of electronic fan regulator, stepped type, 230/240 Volt, flush type, suitable for 1200/1400mm sweep ceiling fan, complete all as specified and direcetd.

S&F in replacement of switch socket combination, box type, 5 Pin, 5 Amps, flush type, complete all as specified and direcetd.

S&F in replacement of switch socket combination, box type, 5 Pin, 15 Amps, flush type, complete all as specified and direcetd.

M&L for point wiring for one light / fan / bell point with using approved color coding as per IS code (Red, Black and Green for single phase circuit) with multi stranded copper condutor 1.5 Sqmm nominal cross section area, single core, PVC insulated and unsheathed FRLSH cable 1100V grade in and including medium grade,PVC concealed conduit ISI marked of dia not less than 20mm and conduit accessories, concealed in wall/ roof/ floor etc. with terminated to new pressed flush metal box and readily available cover with outer plates and inner plates etc, suitable for mounting modular type switches, sockets, fan regulators etc. and PVC insulated multistranded copper condutor 1.5 Sqmm nominal cross section area, single core FRLSH cable as earth continuity conductor to common earth and connecting to earth dolly, complete all as specified and directed for the followings :-

All as per serial item No. 20.00 here-in-above but for 3/5 Pin 5 Amp socket on the same board with other switches.

All as per serial item No. 20.00 here-in-above but 3/5 Pin 5 Amp Socket on independent board.

All as per serial item No. 20.00 here-in-above but for point wiring with two runs of FRLSH PVC insulated unsheathed, 1100 V grade cable multi stranded copper conductor of size 2.5 Sqmm, drawn through in and including PVC conduit size of not less than 25mm concecled in wall / surface.

All as per serial item No. 20.00 here-in-above but one light / fan point, controlled by two way switch.

S&F in replacement of modular switch, single pole, one module, 6 Amps, one way complete all as specified and directed.

S&F in replacement of modular socket, 6 Amps, 2/3 pin, 2 module, complete all as specified and directed.

S&F in replacement of modular switch, single pole, one module, one way 16 Amps, complete all as specified and directed.

S&F in replacement of modular socket, 6/16 Amps, 2/3 pin, 2 module, complete all as specified and directed.

S&F in replacement of modular bell push, 6 Amps, 1 module, flush type, complete all as specified and directed.

S&F in replacement of modular electronic fan regulator, step type, two module, 120 watt, 230 Volt and making all necessary connections, complete all as specified and directed.

S&F in replacement of switch piano, flush type, single pole, two way, 5/6 Amps, complete all as specified and direcetd.

S&F LED light fitting 1x22 Watt, 230 V, high quality LED batten with aluminum extrusion housing with PC diffuser IP-20, connecting up with flexible copper wire of suitable size from ceiling rose to LED fitting, with CRI >, 80 efficacy : 120 Lm/W , IP-20, complete all as specified and direcetd.

S&F LED light fitting mirror type with high out put diffuser, 2 feet, 10/12 Watt, 220 V, AC, decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size, with CRI >, 80 efficacy : 120 Lm/W , IP-20, complete all as specified and direcetd.

S&F LED light fitting with high out put diffuser, 1 feet, 5 Watt, 220 V, AC, decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size, with CRI >, 80 efficacy : 120 Lm/W , IP-20, complete all as specified and direcetd.

S&F LED bulk head (6500K) fitting of 9/10 Watt with CRI >, 80 efficacy : 120 Lm/W , IP-20, surface mounting type extruded aluminium body with diffuser, complete all as specified and directed.

S&F LED light fitting 1x20 Watt, 4 feet with emergency inverter batten with 3 Hours backup (100Lm/W) 230 V, high quality LED batten with aluminum extrusion housing with PC diffuser IP-20, connecting up with flexible copper wire of suitable size from ceiling rose to LED fitting, with CRI >, 80 efficacy : 120 Lm/W , IP-20, complete all as specified and direcetd.

S&F LED lights fitting 1x10 Watt, 2 feet with emergency inverter batten with 3 Hours backup (100Lm/W) 230V, high quality LED batten with aluminum extrusion housing with PC diffuser IP-20, connecting up with flexible copper wire of suitable size from ceiling rose to LED fitting, with CRI >, 80 efficacy : 120 Lm/W , IP-20, complete all as specified and direcetd.

S&F 20 Watt LED cone round clear/ milky diffuser with die cast body post top lantern, suitable for LED 100 Lm/W with IP-65 protection outdoor type with complete accessories including suitable size black iron pipe, connection wire upto 10 RM with conduite pipe of suitable size and junction box with MCB, SP, 6/10 Amps, complete all as specified and directed.

S&F 15 Watt energy saving LED garden light fitting, decorative, bollard type, glare free mushroom shaped, milky diffuser (Bulb 100Lm/W) aluminium housing complete with all accessaries and fixing arrangement on PCC block of size 45cm x 45cm alogwith suitable size PVC junction box for connection of wire, Gl pipe, nuts, bolts, washers etc. complete with PVC insulated copper conductor, multistranded cable of size 10 Sqmm 2 Core with PVC conduit of suitable size, complete all as specified and directed.

S&F surface/ recessed mounting LED luminaire, size 600mm x 600mm, capacity 35/36 Watt, 220 Volts, AC, recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders and LED lamp, suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size, complete all as specified and directed.

S&F decorative wall light fixture, made up of polycarbonate, suitable for 9 Watt LED (B-22 base) complete with LED with CRI >, 80 efficacy : 120 Lm/W , IP-20, complete all as specified and directed.

S&F LED building security light 25/35 Watt, 230 Volts AC (120 Ln/W) with high pressure die cast aluminum housing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP-66 protection, complete all as specified and directed.

S&F surface/ recessed mounting LED warm light fitting, panel 2 feet x 2 feet (Min size 600mm x 600mm), capacity 35/36 Watt, environmental freindly, new generation, aesthetically designed, ultra modern recess mounting limunaire with high brightness SMD LEDs as light source, suitable for armstrong / grid / false ceiling, complete all as specified and directed.

M&L for submain wiring with two run single core 4.0 Sqmm FRLSH copper conductor cable PVC insulated, unsheathed, 1100 Volts grade including 25mm dia in PVC concealed conduit, medium grade, ISI marked with all accessories such as Tees, elbows, junction boxes etc. as required, fixed on wall alongwith one run of 4.0 Sqmm single core PVC FRLSH insulated unsheathed copper conductor cable as continuous earth wire and connecting to existing main switch board / distribution board, complete including taking down unserviceable submain of any type/size and testing on completion, complete all as specified and directed. Note :- Two run of 4.0 Sqmm and one run 4.0 Sqmm cable and one run of PVC conduit / PVC casing & caping shall be measured as one unit/RM.

M&L for submain wiring with two run single core 6.0 Sqmm FRLSH copper conductor cable PVC insulated, unsheathed, 1100 Volts grade including 25mm dia in PVC concealed conduit, medium grade, ISI marked with all accessories such as Tees, elbows, junction boxes etc. as required, fixed on wall alongwith one run of 6.0 Sqmm single core PVC FRLSH insulated unsheathed copper conductor cable as continuous earth wire and connecting to existing main switch board / distribution board, complete including taking down unserviceable submain of any type/size and testing on completion, complete all as specified and directed. Note :- Two run of 6.0 Sqmm and one run 6.0 Sqmm cable and one run of PVC conduit / PVC casing & caping shall be measured as one unit/RM.

S&F in replacement of SPN sheet metal steel powder coated distribution board for MCBs fitted with bus bar neutral link earth bar and din rail suitable for use on 240 Volts, 50Hz, double door, DB system, 4 way, complete all as specified and directed.

S&F in replacement of SPN sheet metal steel powder coated distribution board for MCBs fitted with bus bar neutral link earth bar and din rail suitable for use on 240 Volts, 50Hz, double door, DB system, 8 way, complete all as specified and directed.

S&F in replacement of SPN sheet metal steel powder coated distribution board for MCBs fitted with bus bar neutral link earth bar and din rail suitable for use on 240 Volts, 50Hz, double door, DB system, 12 way, complete all as specified and directed.

S&F in replacement of TPN sheet metal steel powder coated distribution board for MCBs fitted with bus bar neutral link earth bar and din rail suitable for use on 415 Volts, 50Hz, double door, DB system, 4 way, complete all as specified and directed.

S&F in replacement of VTPN MCCB, 125 Amps, double door distribution board, 4 Way, 415 Volts grade IP-43 Protection with provision for MCCB as incoming and three / single phase (TP/SP) outgoings, complete with insulated bus bar arrangements, fixed/ flush to wall complete including connections with and including necessary reducer lugs, complete all as specified and directed.

S&F in replacement of thermal magnetic MCCB, 4 Pole, 100 Amps, 415 Volts, 16 KA including making necessary arrangements, complete all as specified and directed.

S&F in replacement of thermal magnetic MCCB, 4 Pole, 125 Amps, 415 Volts, 16 KA including making necessary arrangements, complete all as specified and directed.

S&F in replacement, connection and testing 'B' series SPN MCB, capacity 40 to 63 Amps, 240 Volts, 50 Hz, 10 KA for lighting and other domesitc loads including necessary copper lugs, complete all as specified and directed.

S&F in replacement of 'B' series MCB SP, capacity 6-32 Amps, 10 KA, complete all as specified and directed.

S&F in replacement of 'B' series MCB SPN, capacity 32-40 Amps, 10 KA, complete all as specified and directed.

S&F in replacement of MCB, TPN, 100 Amps, 415 Volts, 10 KA, complete all as specified and directed.

S&F in replacement of surface/ recessed mounting Trim NXT 15 Watt LED down light, round/ square type, 220 Volts AC, cool light, suitable for ceiling with high efficiency PMMA and surge protection upto 3 KV, diffuser soft glare free light complete with drivers including connecting cable of suitable size, complete all as specified and directed.

S&F in replacement of on load changeover switch, 4 Pole, 415 Volts in sheet metal enclosure of capacity 100 Amps, complete all as specified and directed.

S&F in replacement of metal clad plug socket, single pole enclosure with two pin earth plug and socket including MCB SP 20 Amp 240 volts, complete all as specified and directed.

S&F in replacement of 3mm thick plastic laminated ebonite sheet cover of any size including cutting / finishing or making hole for mounting of switches, sockets, regulators etc. including screws, washers, plastic gutties, complete all as specified and directed.

M&L for earthing complete with galvanized steel earth plate electrode of size 600mm x 600mm x 6mm thick, buried directly in ground (earth pit not less than 2.25 mtr deep below ground level) with top edge of the plate not less than 1.5 mtr below normal ground level, connected to earth plate with GI wire of 4mm dia by means of nuts, bolts and washers, check nuts of galvanized iron or steel including 15mm dia GI pipe light grade upto 1.5 mtr below GL for protection pipe, excavation and earth work, charcoal dust, common salt, PCC 1:3:6 type C-1 chamber with cover and RCC 1:2:4 type B-1 (using 20mm graded crushed stone aggregates), reinforced with 6mm dia round bars @ 75mm c/c both way with MS handle 12mm dia, PGI funnel and wire mesh all as shown in electrical plate No. 3 of SSR Part-I, connected to earthing test point terminal including testing on completion, complete all as specified and directed.