CA NO. GE AF NO.1/GUR-12/2023-24 REPAIR, REPLACEMENT AND MAINTENANCE OF UNSERVICEABLE AND CORRODED GI/CI PIPE LINES AND ALLIED WORKS, SUPPLY AND DISTRIBUTION PIPE LINE OF SWT AND CONTROL VALVES INCLUDING ALLIED WORKS FOR WATER SUPPLY INSTALLATIONS AT

Amount

Excavation in trenches by any means in soft/loose soil, not exceeding 1.5 meter wide & not exceeding 1.5 metre in depth and getting out complete all as specified and as directed by E-in-Charge.

Returning, filling in trenches including spreading, leveling, watering and well ramming in layers not exceeding 25cms thick in each layer complete all as specified and directed by Engineer-in-Charge.

Removing surplus excavated soil to a distance n’exc 50 meters and depositing where directed at a level not exceeding 1.5 meter above the starting point all as specified and directed by Engineer –in-Charge.

Supply and fixing in replacement galvanized iron tubing 100mm bore medium grade with all ISI marked fittings laid in trenches floor/ road complete all as specified and directed by Engineer-in-Charge.

Supply and fixing in replacement galvanized iron tubing 80mm bore medium grade with all ISI marked fittings laid in trenches floor/ road complete all as specified and directed by Engineer-in-Charge.

Supply and fixing in replacement galvanized iron tubing 50mm bore medium grade with all ISI marked fittings laid in trenches floor/ road complete all as specified and directed by Engineer-in-Charge.

Supply and fixing in replacement galvanized iron tubing 40mm bore medium grade with all ISI marked fittings laid in trenches floor/ road complete all as specified and directed by Engineer-in-Charge.

Supply and fixing in replacement galvanized iron tubing 25mm bore medium grade with all ISI marked fittings laid in trenches floor/ road complete all as specified and directed by Engineer-in-Charge.

Supply and fixing in replacement galvanized iron tubing 20mm bore medium grade with all ISI marked fittings laid in trenches floor/ road complete all as specified and directed by Engineer-in-Charge.

Supply and fixing in replacement galvanized iron tubing 15mm bore medium grade with all ISI marked fittings laid in trenches floor/ road complete all as specified and directed by Engineer-in-Charge.

Taking out galvanized iron tubing 20 mm bore medium grade with joints , cleaning properly and refixing in the same or different location with new GI ISI marked fittings where ever required complete all as specified and directed by engr in charge.

Taking out galvanized iron tubing 25 mm bore medium grade with joints , cleaning properly and refixing in the same or different location with new GI ISI marked fittings where ever required complete all as specified and directed by engr in charge.

Taking out galvanized iron tubing 40 mm bore medium grade with joints , cleaning properly and refixing in the same or different location with new GI ISI marked fittings where ever required complete all as specified and directed by engr in charge.

Taking out galvanized iron tubing 50 mm bore medium grade with joints , cleaning properly and refixing in the same or different location with new GI ISI marked fittings where ever required complete all as specified and directed by engr in charge.

Supplying and Fixing of sluice valve cast iron size 150mm bore PN 1.6with brass spindle and fly nut flaged both ends and drilled for jointing wheel head type including two flanged joints with nuts, bolts and washer, rubber insertion packing etc including taking out old sluice valve complete all as specified.

Supplying and Fixing of sluice valve cast iron size 100mm bore PN 1.6 with brass spindle and fly nut flaged both ends and drilled for jointing wheel head type including two flanged joints with nuts, bolts and washer, rubber insertion packing etc including taking out old sluice valve complete all as specified.

Supplying and Fixing of sluice valve cast iron size 80mm bore PN 1.6 with brass spindle and fly nut flaged both ends and drilled for jointing wheel head type including two flanged joints with nuts, bolts and washer, rubber insertion packing etc including taking out old sluice valve complete all as specified.

Supply and laying cast iron pipe spigot and socket ends centrifugally cast, Class LA, in any length laid in trenches of sizes 150mm dia including taking out old GI/CI/DI pipe line complete all as specified and as directed by Engr-in-charge.

Supply and laying cast iron pipe spigot and socket ends centrifugally cast, Class LA, in any length laid in trenches of sizes 100mm dia including taking out old GI/CI/DI pipe line complete all as specified and as directed by Engr-in-charge.

Supply and laying cast iron pipe spigot and socket ends centrifugally cast, Class LA, in any length laid in trenches of sizes 80mm dia including taking out old GI/CI/DI pipe line complete all as specified and as directed by Engr-in-charge.

Supply and laying jointing and testing for DI ductile iron pipe K-7 spigot and socketed type suitable for tightend joint of size 150mm dia compelete, including taking down old CI/DI pipe line complete all as specified and as directed.

Supply and fixing of Gun Metal, globe or gate valve, with iron wheel head, screwed both ends for iron pipe and fixed of size 40mm bore including taking down old valve complete all specified and as directed by Engr-in-Charge.

Supply and fixing of Gun Metal, globe or gate valve, with iron wheel head, screwed both ends for iron pipe and fixed of size 25mm bore including taking down old valve complete all specified and as directed by Engr-in-Charge.

Supply and fixing of Gun Metal, globe or gate valve, with iron wheel head, screwed both ends for iron pipe and fixed of size 20mm bore including taking down old valve complete all specified and as directed by Engr-in-Charge.

Material and labour for brick masonry valve pit of size 90cms x 90cms x 90cms (internal dimensions of chamber) depth to be reckoned from the top of PCC foundation to top of MS cover as shown on drgs with MS sheet cover 3 mm thick including frame of angle iron 40mm x 40mm x 6mm with locking arrangement including painting two coats of black synthetic enamel paint over a coat of red oxide primer etc including brick work in cement mortar 1:6 , 15mm thick plastering in cement mortar 1:4 (Internal and external) and necessary excavation and earth work in any type of soil returning, filling in disposal of surplus spoil to a distance not exc. 50 metres, 15cm thick PCC 1:4:8 type D-2 using 40 mm graded stone aggregate for base all as specified and shown in TD drawing. Note:- Note :- Drg for wall pit can be seen in office of Engr-in-Charge.

Supply and fixing of CI fittings such as bends (any type, radius and angles), tapers any type, Tee pieces single branch ‘Y’ Junction , double branch, cross (all sockets and spigot) collars, caps and plugs upto 150mm bore pipe complete all as specified. Note :-(Run lead joints etc shall be measured and paid separately)

Material and labour for cutting of existing CI/GI pipe line of size 150mm/100mm dia bore (supply main) and making connection by inserting CI Tee/CI collar etc and connecting to new GI Pipe line 50mm dia complete all as specified and directed by Engineer-in-Charge. Note :- Run lead joint, excavation earth work, CI specials measured and paid for separately)

M&L for run lead joints 80mm bore of pipe complete all as specified and directed by Engineer-in-Charge

M&L for run lead joints 100mm bore of pipe complete all as specified and directed by Engineer-in-Charge

M&L for run lead joints 150mm bore of pipe complete all as specified and directed by Engineer-in-Charge

M&L for in repair of rubber gaskit Flanged joints including rubber gaskits , nut,bolts , and washer upto 150mm bore of pipe complete all as specified and directed by Engineer-in-Charge

M&L for in repair of rubber gaskit Flanged joints including rubber gaskits , nut,bolts , and washer upto 100mm bore of pipe complete all as specified and directed by Engineer-in-Charge

M&L for in repair of rubber gaskit Flanged joints including rubber gaskits , nut,bolts , and washer upto 80mm bore of pipe complete all as specified and directed by Engineer-in-Charge

Supply and fixing in replacement Non return sluice valve cast iron size 150 mm bore flanged joints with nuts ,bolts and washer , rubber insertion packing etc complete all as specified and directed by Engineer-in-Charge

Supply and fixing in replacement Non return sluice valve cast iron size 100 mm bore flanged joints with nuts ,bolts and washer , rubber insertion packing etc complete all as specified and directed by Engineer-in-Charge

Supply and fixing in replacement Non return sluice valve cast iron size 80 mm bore flanged joints with nuts ,bolts and washer , rubber insertion packing etc complete all as specified and directed by Engineer-in-Charge

Suplpy and Fixing of air release valve cast iron size 80mm bore with twin air outlet suitable to be fixed in 100mm dia DI pipe flanged ends with flanged pipes 80mm dia of suitable length rubber insertion packing rungs, nuts, washers and complete jointing material of 100mm dia including taking out old sluice valve complete all as specified.

M&L for drilling hole under hardstanding / road in different location as per site requirement (between 03 metre to 12 metre ) for laying GI /CI pipe by mean of T&P and without disturbing the top surfaces and making good disturbed surfaces with existing material (if any ) complete all as specified and as directed.

M&L for rectifying leakage of GI pipe line including excavation in mud (not exc 0.7m x0.7mx0.7m) and making arrangement for dewatering by using electric/diesel pump/manual additional labour, taking out existing joint and making joint including providing all GI fittings i.e. socket, tee, elbow , nipples upto 6'' length,GI unions,Reducer (Except GI pipes) complete all as directed for following size of pipe lines:-

(a) 80 mm bore.

(b) 50 mm bore.

(c) 32 to 40 mm bore.

(d) 25 mm bore.

(e)20 mm bore.

(f) 15 mm bore.

Note:- (a) The amount of Rs 1,76,798/- against Schedule of Credit on Page No 110 & 111 shall be deducted from the total amount quoted against Sch 'A' while deriving the Contract Sum for Acceptance.

NAVYUG VYAPARI

M/S PARKASH ENTERPRISES

M/S Anand Enterprises