Electrical work for renovation of HAL Canteen and Kitchen area

Light/Fan/Exhaust Fan Point wiring

Supply & making One Light point/fan point/exhaust fan point/call bell point controlled by one modular type switches, 6 Amps 230 Volts with 1.5 sqmm, P.V.C. insulated, copper FRLS type conductor multi stranded wire of 1100/660 Volts grade in heavy duty P.V.C. pipe with modular switch, modular plate, suitable GI box and earthing the point with 1.5 Sq mm FRLS PVC insulated copper conductor single core etc. including all accessories such as bends, J.B,tees, ceiling rose, batten holder etc. required for point wiring work. The pipe shall be laid concealed in wall; partially it may be flush to the wall as per site requirement.

Add to the above Item-1 for each addition on only light points on the same switch circuit including all materials required for such wiring work.

Supply & making One (half point) with 5 pin, 6 Amps modular socket controlled by 6 Amps switch modular type on the same board with other switches with 1.5 sqmm, PVC. insulated,copper FRLS type conductor, multi stranded wire.

Supply and Fixing Following modules GI Box along with modular base & cover plate for modular switches in recess etc as required. The work includes removing of old damaged boxes and cover plate etc.

Supply and Fixing Following modular switch/socket on the existing modular plate & switch box including connections but excluding modular plate etc as required.

Rewiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable and 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable as earth wire in existing surface/ recessed steel/PVC conduit including dismantling as required.

Sub-main/Circuit Wiring

Wiring for circuit /submains wiring alonghwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface /recessed heavy duty class PVC conduit as required.

Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required.

Power Point

Supply & making One independent domestic power point with 3 pin, 5/6 Amps modular socket controlled by 5/6 Amp modular switch, including 3 module GI box along with modular base and cover plate for modular switches, connections to switches etc as required.

Supply & making One independent domestic power point with 3/5 pin, 15/16 Amps modular socket controlled by 15/16 Amp modular switch, including 3 module GI box along with modular base and cover plate for modular switches, connections to switches etc as required.

Supply & Fixing suitable size GI Box with Modular plate and cover in front on surface or in recess including proving and fixing 25A modular socket and 25A modular SP MCB "C curve including connection, painting etc. as required.

Dressing Lan/Wan/Telephone Cable

Supplying and fixing of 25MM of Heavy class PVC conduit and dressing of LAN/WAN/telephone cable along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required. (Make: AKG/CAP/Anchor/MODI)

MCB DB

Supply and installation of three phase, double door MCB DB suitable for incorporating MCB's, 4 way per phase with following incoming and out goings MCB's Incoming- 63 Amps, TPN Isolator,:MCB-01 No., Outgoings: 10-32 Amps S.P. MCB –12 Nos. The D.B. must be installed flush to the wall and wall must make good after fixing.

Supply and installation of three phase, double door MCB DB suitable for incorporating MCB's, 8 way per phase with following incoming and out goings MCB's Incoming- 63 Amps, TPN Isolator,:MCB-01 No., Outgoings: 10-32 Amps S.P. MCB – 24 Nos. The D.B. must be installed flush to the wall and wall must make good after fixing.

Power Cable

Supply/Laying

Supply & Laying of XLPE insulated, PVC sheathed Armored, 1.1 KV grade, Aluminium conductor power cable, conforming to IS 7098 (Part-I). Concealed cabling can be done to cut/chase the wall/floor, laying cable tray (provided by HAL) and after laying of cable wall/floor shall be finished as original & if cable laid on wall then use clamps for fixing the cable. The work also includes connection work which includes all the required materials for their jointing work. Cable to be laid as required at site and as per the direction of Engineer-In-Charge.

a) Size of cable 4 core x 25 sqmm

End/Straight Trough Joint

Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required

4C x 25 Sqmm.Al Arm LT cable.

Earthing

Supply of UL listed CPRI Tested maintenance free copper bonded earth rod of 3 metre having diameter of 17.2mm with 250 micron copper bonding tested 45 kA peak short-circuit current with clamp made of stainless steel for terminating cable / flat conductor. Earth enhancing mineral backfill compound ( electrical resistivity 0.018 ohm metre ), environmental friendly, 25 kg tested for Leaching & TCLP with NABL accredited lab. The systems is conforming to IS 3043, IS / IEC 62305, IEC 61643-5-54, UL 467, the rod has to be tested to for dimension, marking, tensile strength, salt mist, coating thickness, electrical resistivity test before and after corrosion test etc as per IEC 62561-2.Chamber Inspection Pit made up of PP material can bear 60kN load. Set Consist of following BOM (1) Earth rod of 3 mtr length having the dia of 17.2 mm dia (2) Backfill Compound 12.5 Kg bag x 2 nos (3) Universal SS Clamp Make: Cape/Sabo/Zeff/SPG Power

Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing along with existing surface/ recessed conduit/ submain wiring/ cable as required.

Supplying and laying 25 mm X 5 mm GI strip at 0.50 meter below ground as strip earth electrode, including connection/termination with nut, bolt, spring, washer etc as required.(Jointing shall be done by overlapping and with 2 sets of brass nut bolt & spring washer spaced at 50mm)

Removal of Old Wiring

Removal of old Cables, Wires, Light Fitting, fan and DB, MCB DB and all other accessories required to meet the scope of work at site and at nearby location like passage, Gallery etc after tracing of live and non live wires of electrical, Lan and Telephone thereafter dressing of cable as directed by EIC.

Lighting Fixtures

Supply and installation of recess mounting LED luminaire of size 600 mm x600 mm 35/36W 220 V AC with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp including connecting up with dirver thre core flexible copper cable. The work also includes connection from ceiling rose to fitting with twin core, white color flat wire of 1100/660 Volts grade. All material required for the work shall be supplied by the contractor.

Supply and Installation of Industrial well glass hanging/Fixed cool white down lights for kitchen area with all necessary material required for installation work and connection. The work shall be done as per direction of engineer incharge. Specifications: Housing: pressure Die Cast Diffuser: PC-Translucent Lumenn Pack: 8300 Wattage: 70 Watt Input Vol: 120-277VAC IP/Impact resistance: IP66/IK10 Lm/W:120 PF: >0.9 Surge Protection: 4KV in-builtenst Surge Protection: yes Over voltage protection: yes @ 325 V with auto restart

Supply & installation of LED Light Fitting, 4 feet x 34-38 watt twin T-8 LED tube of philips make or equivalent Crompton/Bajaj/Havells make complete fitting to be installed on ceiling or hanging from ceiling by m.s pipe/suspension wire or fixed on wall with all necessary fixing materials and arrangement. The installation work must be done as per direction of Engineer-In-Charge. The work also includes connection from ceiling rose to fitting with twin core, white color flat wire of 23/.0076 size, 1100/660 Volts grade wire. All material required for the work shall be supplied by the contractor. The work shall be done as per direction of engineer incharge.

Supply & installation of LED Batten Light Fitting, 4 feet, 20 Watt , Cool white complete fitting to be installed on ceiling or fixed on wall with all necessary fixing materials and arrangement. The installation work must be done as per direction of Engineer-In-Charge. The work also includes connection from ceiling rose to fitting with twin core, white color flat wire of 23/.0076 size, 1100/660 Volts grade wire. All material required for the work shall be supplied by the contractor. The work shall be done as per direction of engineer incharge.

Supply & installation of LED Batten Light Fitting, 2 feet, 10 Watt, Cool white/warm white complete fitting to be installed on ceiling or fixed on wall with all necessary fixing materials and arrangement. The installation work must be done as per direction of Engineer-In-Charge. The work also includes connection from ceiling rose to fitting with twin core, white color flat wire of 23/.0076 size, 1100/660 Volts grade wire. All material required for the work shall be supplied by the contractor. The work shall be done as per direction of engineer incharge.

Supply and fixing LED street light fitting 70 watt 230V AC outdoor type with high pressure die cast aluminium hosing and heat resistant complete with driver, lamp bracket, GI Pipe etc as required for installation with impact and corrosion resistant including thermal management in multi optics complete with IP 65/66.

Insect Killer

Supply , installation, testing and Commissioning of industrial insect killer,compact size, light weight easy to install with Dual 30 watt each UV Tube with 10,000.00 hrs of long life and its robust high voltage net. Make: Maharaja/Pest-O-Flash

SUB-TOTAL

GST @18% on SUB-TOTAL

TOTAL

Name of Vendor:

Note: PLEASE REFER CHAPTER 6(B) OF TECHNICAL BID FOR APPROVED MAKES OF ITEMS & EQUIPMENTS FOR THIS WORK .

HINDUSTAN AERONAUTICS LIMITED ACCESSORIES DIVISION, LUCKNOW PQ FORM/ELIGIBILITY CRITERION-MATRIX

NAME OF THE WORK: "Electrical work for renovation of HAL Canteen and Kitchen area"

Estimated Cost (in Rs.)

Name of the Individual / Firm / Company: * Mandatory

Type of ownership Pvt. Ltd./ Proprietorship/Partnership/ Public limited/ Govt. Agencies/ Trust If Other, please specify

Details of Constitution or Legal Status such as certificate of incorporation, shops and establishments, Contractor registration No etc.,

Address of Correspondence

Contact Details: Contact person name: Designation: Mobile No:. Ph. No. with STD code: Email Id :

Contractor must give his acceptance to provide services as per ‘Requirement, Scope of work, Drawings’ and ‘Terms & Conditions' contained in Technical Bid.

Self attested copy of PAN Registration certificate issued by income tax authority.

Sel attested Copy of GST Registration Certificate.

DECLARATION I

The document being viewed / downloaded from the website and having read & understood all the contents of the tender document mentioned under terms and conditions including price bid do hereby accept all the terms and conditions laid down in the said Tender document and will abide by the same on acceptance and ward of work.

DECLARATION II

I/We declare and confirm that - 1. All information and attachments submitted along with this offer are true and correct. 2. I/We are aware that any false information provided herein will result in the rejection of my offer . 3. I/We shall not make refund claims of expenditure incurred in processing this offer. 4. I / We aware that document sought only be uploaded for evaluation of offer. 5.I/We are not debarred / blacklisted from any Govt agencies, if debars for specified period reason for debar and copy of resumption of same shall be provided. 6. I/We have not concealed any information which may adversely effect my qualification.

DECLARATION III

I/We declare and confirm that all the documents related to NIT mentioned at SI.No.2 and 3 have been attached with the technical bid.

Name of Bidder:

* 1. To be filled by Bidder essentially and carefully. Supporting documents must be attached as proof. Clarifications shall be sought w.r.t. information provided with tender documents. 2. Similar works implied that works related to LT/HT Electrical Works in nature. Mere supply of electrical goods does not mean qulification in the tender. 3. Scanned copy of completed work orders and completion certificate issued by respective clients to be attached. If the completion certificate is form private organization the same shall be uploaded with TDS certificate. 4. The work shall be completed as a whole, Partial value/completion will not be considered. 5. The Bidders are requested to attach scan copies of all the relevant / desired / required proofs/ documents on e-portal, failing which tender shall be summarily rejected without assigning any reason to bidders.