SPECIAL REPAIRS TO BLDG NO P-8, P-9, PROVN OF COVERED PARKING SHED, SOLAR STREET LIGHTS AND AUGUMENTATION OF WATER PIPE LINE AT MIL STN BHUSAWAL UNDER GE (S) AHMEDNAGAR

Amount

Dismantling of AC sheet (corrugated, semicorrugated etc) as in roof covering including ridges complete all as specified and as directed.

Demolition of Kota/Cudappah/Granite stone slabs of any description or thickness in floors, aprons etc. laid, bedded and pointed in any mortar all as specified and as directed.

Demolition of cement concrete in ground floors and pavings n exc 15cm thick (below or above gound level) all as specified and as directed.

Demoltion of brickwork or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars, etc. all as specified and as directed.

Dismantling wrought iron or mild steel work of any description and in any position complete all as specified and as directed.

Dismantling floor, hearth or wall tiling including cement morter bedding (but not backing), removing serviceable tiles to store and rubbish off the premises all as specified and as directed.

Taking down chowkats or frames not exc 1.5sqm each with shutters without taking off shutters from the frame all as specified and as directed.

Taking down chowkats or frames exc 1.5 Sqm but not exc 4 sqm each with shutters without taking off shutters from the frame all as specified and as directed.

Taking down shutters of any description exc 1 Sqm and n.exc 2 Sqm each all as specified and as directed.

Taking down shutters of any description exc 2 Sqm each all as specified and as directed.

Taking down shutters of any description exc 1 Sqm and n.exc 2 Sqm each and refixing in same opening all as specified and as directed.

Taking down shutters of any description exc 2 Sqm each and refixing in same opening all as specified and as directed.

Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc all as specified and as directed.

Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads all as specified and as directed.

Taking up or down 15mm bore steel tubing and connections etc. all as specified and as directed.

Taking up or down 20mm bore steel tubing and connections etc. all as specified and as directed.

Taking up or down 25mm bore steel tubing and connections etc. all as specified and as directed.

Excavating in post holes(or similar holes) each not exc 0.5 CuM getting out , returning filling in and ramming earth or broken rubble mixed with earth around, in layers not exc 25 cm, in Soft/ loose soil

Excavation in trenches, n.exc. 1.5m wide and n.exc. 1.5m in depth; for foundations, etc or for shafts, wells, cesspits, manholes, pier holes, etc. n.exc 10 sqm on plan and n.exc 1.5m in depth and getting out in soft/loose soil complete all as specified and as directed.

Excavation in trenches, n.exc. 1.5m wide and n.exc. 1.5m in depth; for foundations, etc or for shafts, wells, cesspits, manholes, pier holes, etc. n.exc 10 sqm on plan and n.exc 1.5m in depth and getting out in hard/dense soil complete all as specified and as directed.

Returning, filling in, including, spreading, levelling, watering and well ramming in layers not exceeding 25 cm thick in any type of soil complete all as specified and as directed.

Removing excavated soil to distance n.exc. 50m and depositing where directed at a level n.exc. 1.5m above the starting point complete all as specified and as directed.

M&L for hard core of broken stone, gauge not exc. 63mm, deposited, spread, levelled and rammed in layers not exc. 15 cm thick, including watering complete all as specified and as directed.

M&L for PCC 1:4:8, type D-2 using 40 mm graded stone aggregate) as in foundations, filling and mass concrete complete all as specified and as directed.

M&L for PCC 1:3:6, Type C-2 (using 40mm graded stone aggregates) as in foudation, filling and mass concrete complete all as specified and as directed.

M&L for cement concrete 1:2:4, type B1 (using 20mm graded stone aggregates) as in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, lacing courses, parapets and railings upto 60 cm in height, copings, apex stones, bed plates etc all as specified and as directed.

M&L for PCC 1:3:6, type C-1 (using 20mm graded stone aggregates) as in hold fasts, bed blocks, bed plates, concrete filling around pipes including necessary formwork all as specified and as directed.

M&L for brickwork with subclass ‘B’ bricks, old size, straight or curved on plan exc 6m mean radius, built in cement mortar 1:6 complete all as specified and as directed.

S&F factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 65 x 125 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete all as specified and as directed.

S&F Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 35 mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as specified and as directed.

S&F 35mm thick second class hard wood glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats all as specified and as directed.

S&F 75mm size mild steel butt hinges, medium weight, cold rolled and fixed all as specified and as directed.

S&F 100mm size mild steel butt hinges, medium weight, cold rolled and fixed all as specified and as directed.

S&F 200 mm size aluminium anodised, barrel tower bolts of extruded section and fixed all as specified and as directed.

S&F 100 mm size aluminium anodised, barrel tower bolts of extruded section and fixed all as specified and as directed.

S&F 150 mm size extruded aluminium alloy handles, fabricated type, anodised all as specified and as directed.

S&F 100 mm size extruded aluminium alloy handles, fabricated type, anodised all as specified and as directed.

S&F 300 mm long aluminum alloy anodised sliding door bolt with hasp, staple (bolt type) and fixing clips of steel, cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast aluminum alloy complete all as specified and as directed.

S&F stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples all as specified and as directed.

S&F in repairs stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples all as specified and as directed.

S&F in repairs, brass chromium plated tubular towel rail, 20 mm dia, D type, 60 cm long between flanges and fixed all as specified and as directed.

M&L for framed work such as grills, grating etc with end of bars shoulderd and/or riveted, welded or forged into spikes, framed guard bars iron doors, ladders, framed balusters, walk ways, railings, frame work of water tanks and similar work conforming to Fe 290 Gde E-165 all as specified and as directed.

S&F mild steel bands, straps, supports or stays, rainwater ventilating pipes including bolts of required size, hooks (stay) heavy for large gates hook and pintle hinges large hasps and staples chains hand made sliding bolts, clamps, hold fasts, wall tiles, hooks for hanging fans, plain angle cleats for securing purlins to wood truses or fats knee piece insert two way and three way straps plate washers and similar small articles conforming to Fe 290 Gde E-165 all as specified and as directed.

S&F rolled mild steel sections as in main and cross beams, hip and jack rafters, purlins where connected to common rafters and running rails fixed with angle cleats or other connecting plates, conforming to Fe 410-W(Gde-E-250) quality-A, complete all as specified and as directed.

S&F steel windows with side hung shutters including projecting type hinges with steel handle and steel peg stay complete with glazing bars, dovetailed or welded complete all as specified and as directed.

S&F steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete without glazing bars, dovetailed or welded complete all as specified and as directed

M&L for mild steel work as in wind ties for roof including securing bolts complete including all necessary drilling, bolting or riveting etc and similar work conforming to Fe-290 Gde-E-165 complete all as specified and as directed.

M&L for anodised aluminium snap grid framework for false ceiling, size of grid 605 x 605 mm, including 4mm dia GI wire hangers at 1.2m centres, 4mm thick, non asbestos fibre designer cement building boards (decorative type), fixed or laid/ inserted to aluminium framework/grid including dismantling and taking down existing false ceiling (framework, boards, hangers, cover fillets etc) complete all as specified and as directed.

S&F prepainted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified, colour and design as approved by GE complete all as specified and as directed.

S&F prepainted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, ridges, hips, valley gutters, drip and straight flashings fixed with self tapping screws as specified colour and design as approved by GE complete all as specified and as directed.

M&L for 75mm thick, PCC 1:4:8, type D-2 (using 40mm graded stone aggregates) as in sub base complete all as specified and as directed.

M&L for 100mm thick plain cement concrete, 1:2:4 type B-2, using 40 mm graded stone aggregate, finished even and fair as in ramp/path/hard standing all as specified and as directed

M&L for 75mm thick PCC 1:3:6, type C2 (using 40mm graded stone aggregate) as in plinth protection, etc finished the surface even and smooth without using extra cement including provision of joint of size 10 mm wide & 10 mm deep and filling with bitumen mastic joint filling at every 3m length and at corners complete all as specified and as directed.

M&L for 18-20mm thick granite (of any type), table rubbed and polished as in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with the shade of granite complete all as specified and as directed.

M&L for 20-25mm thick machine cut Cudappah stone slabs as in cooking platform including cutting chesis in brick walls and fixing the cuddapa stone in cement mortar 1:2 complete all as specified and as directed.

M&L for 20-25 mm thick machine cut Kota stone flooring (size of kota stone slab 22"x22") laid over and including 20 mm thick bedding layer in cement mortar 1:6, set and jointed in neat cement slurry and pointed in white or coloured cement to match including cutting, rubbing and mirror finish polishing including removing dust etc complete all as specified and as directed.

M&L for 20-25 mm thick machine cut Kota stone slabs on vertical surfaces like risers to steps, skirting etc with and including 10mm thick backing coat in cement mortar 1:4, set and jointed in neat cement slurry and pointed in white or coloured cement to match including cutting, rubbing and polishing including removing dust etc complete all as specified and as directed.

M&L for non skid ceramic coloured tiles 7 to 8 mm thick (square or rectangular) area of each tile exc 0.06 sqm but n exc 0.11 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match complete and with including 15mm thick screed bed in cement mortar 1:6 complete all as specified and directed.

M&L for 350 x 250 x 7mm thick or 450 x 350 x 7 mm thick glazed ceramic coloured tiles on vertical surfaces set and jointed in neat cement slurry and pointed in white or coloured cement to match complete with and including 10mm thick backing coat in cement mortar 1:4 all as specified and as directed.

M&L for 80mm thick machine pressed, precast concrete interlocking paver block of any shape and size confirming to IS 15658-2006 of M-40 Grade with grey cement and no pigment, laid over and including 25mm thick sand cushioning all as specified and as directed.

M&L for 10mm thick rendering on other than fair faces of brick work or concrete surfaces (internal surfaces of walls) in cement mortar 1:6, finished even and smooth without using extra cement all as specified and as directed.

M&L for 15mm thick rendering in two layers on fair faces of brick work or concrete surfaces (external surfaces of walls) first layer of 10mm thick in cement mortar 1:6 and second layer of 5mm in cement mortar in cement mortar 1:4 mixed, finished even and fair all as specified and as directed.

M&L for preparation of newly plastered or unplastered surfaces and two coats of white washing complete all as specified and as directed.

M&L for preparation of newly plastered or unplastered surfaces of walls and applying two coats of oil bound distemper over a coat of chalk whitening primer all as specified and as directed.

M&L for preparation of newly plastered or unplastered surfaces of ceiling and applying two coats of oil bound distemper over a coat of chalk whitening primer all as specified and as directed.

M&L for preparation of newly plastered surfaces of walls and applying two coats of cement base paint over a coat of primer all as specified and as directed.

M&L for complete removal of existing treatment on walls including cornices by scrapping with steel scrappers or any other means including filling depressions of scrapped surfaces and making smooth surface with one coat of 1mm thick (minimum) wall care putty and applying two coats of oil bound distemper (white or tinted) over a coat of primer complete all as specified and as directed.

M&L for complete removal of existing treatment on walls and roof including removing nails, making good holes cracks etc brooming down or steel wire brushing scrapping down or steel wire brushing scrapping down smoke soots etc and applying two coats of exterior acrylic emulsion, any tint over one coat of exterior acrylic primer with and including provision of scaffolding if required for the treatment to external surfaces of building with required safety measures etc complete all as specified and as directed.

M&L for complete removal of existing treatment on ceiling and applying two coats of plastic emulsion paint (white or tinted) over a coat of primer complete all as specified and as directed.

S&F 3mm thick plain sheet glass and glazing with oil putty in square n exc 0.5 Sqm in each pane and fixed complete all as specified and as directed.

S&F 4mm thick plain sheet glass and glazing with oil putty in square n exc 0.5 Sqm in each pane and fixed complete all as specified and as directed.

M&L for preparation of new wood and wood based surfaces of any description not otherwise described exc 10cm width or girth and applying two coats of synthetic enamel paint on over a coat of pink primer all as specified and as directed.

M&L for preparation of old wood and wood based surfaces of any description not otherwise described exc 10cm width or girth and applying one coat of synthetic enamel paint all as specified and as directed.

M&L for preparation of old wood and wood based surfaces of any description not otherwise described but not exc 10cm width or girth and applying one coat of synthetic enamel paint all as specified and as directed.

M&L for preparation of new steel or iron surfaces of any description not otherwise described exc 10cm width or girth and applying two coats of synthetic enamel paint on over a coat of red oxide primer all as specified and as directed.

M&L for preparation of new steel or iron surfaces of any description not otherwise described, not exc 10cm in width or girth, when unconnected with other painting or when paintd in a different tint, applying two coats of synthetic enamel paint on over a coat of red oxide primer all as specified and as directed.

M&L for preparation of old painted surfaces of steel and iron of any description, over 10 cm in width or girth, not otherwise described include for all necessary preparatory work required and applying one coat of synthetic enamel paint all as specified and as directed.

M&L for preparation of old painted surfaces of steel and iron of any description, not exc 10cm in width or girth, when unconnected with other painting or when paintd in a different tint and applying one coat of synthetic enamel paint all as specified and as directed.

S&F in repairs, vitreous china wash hand basin, white, flat back, size 550 mm x 400 mm, including brackets, pillar tap 15 mm bore chromium plated, fancy type, cast copper alloy with capstan heads, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks, 32 mm dia waste coupling brass chromium plated with long screwed shanks and fly nuts, 32mm size brass chromium plated bottle trap inlet and outlet screwed for pipe or connections including necessary packing union and cap, PVC waste pipe,15mm dia PVC connection pipe complete all as specified and as directed.

S&F in repairs vitreous china wash down water closet (Pedestal pattern) including connection to drain (or outgoing pipe) and flushing pipe, anti syphonage pipe, trap set and including white or black seat cover for pedestal pan with mild steel chromium plated aluminium hinging device, fixed to pan with suitable screws etc complete all as specified and as directed.

S&F in repairs PVC valveless syphonic action type flusing cistern, 10 litre capacity, low level type, white with inlet, ball valve, float handle , brackets etc complete all as specifed and as direced.

S&F in repairs vitreous China squatting pan, ‘Orissa’ pattern, size 630 mm x 450 mm white, with integral foot rests with and including 10 litre capacity PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets all as specified and as directed

S&F in repairs 15mm bore health faucet with 1.2 metre long flexble pipe and wall hook complete all as spcified and as directed. Model No. ALD-563 of Jaquar or equivalent model of make Mark, Cera as approved by GE

S&F in repairs vitreous china soap dish, white, approximate size 160 x 160 x 90mm and fixed complete in wall all as specified and as directed

S&F sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long fixed to wall with brass screws all as specified and as directed.

S&F in repairs 75mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and as directed.

S&F in repairs 110mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and as directed.

S&F in repairs 75mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls complete all as specified and as directed.

S&F in repairs 110mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls complete all as specified and as directed.

S&F in repairs 75mm dia PVC (SWR) bends any radius complete all as specified and as directed.

S&F in repairs 110mm dia PVC (SWR) bends any radius complete all as specified and as directed.

S&F in repairs 110mm dia PVC (SWR) bends any radius with access door complete all as specified and as directed.

S&F in repairs PVC (SWR) branch piece, single (single Y) equal or unequal, 110 mm bore with oval access door all as specified and as directed.

S&F in repairs PVC (SWR) branch piece, single (single Y) equal or unequal, 75 mm bore with oval access door all as specified and as directed.

M&L for 15mm bore GI tubing medium grade with all fittings and fixed complete on walls and ceilings or laid in floors etc complete all as specified and as directed.

Refixing old steel tubing and connections in new or old position, 15mm bore galvanised, with and including all new fittings; laid in trenches fixed complete to walls or laid in floors complete all as specified and as directed.

M&L for 20mm bore GI tubing medium grade with all fittings and fixed complete on walls and ceilings or laid in floors etc complete all as specified and as directed.

Refixing old steel tubing and connections in new or old position, 20mm bore galvanised, with and including all new fittings; laid in trenches fixed complete to walls or laid in floors complete all as specified and as directed.

M&L for 25mm bore GI tubing medium grade with all fittings and fixed complete on walls and ceilings or laid in floors etc complete all as specified and as directed.

Refixing old steel tubing and connections in new or old position, 25mm bore galvanised, with and includig all new fittings; laid in trenches fixed complete to walls or laid in floors complete all as specified and as directed.

S&F in repairs stop valves, fancy type brass chromium plated, 15 mm bore screwed down, high pressure, screwed both ends for iron pipe or for unions and fixed all as specified and as directed.

S&F in repairs bib tap, 15mm bore, cast copper alloy, chromium plated, fancy type, with crutch or butterfly handles screwed down for iron pipe or for brass ferrule complete all as specified and as directed.

S&F in repairs sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified and as directed.

M&L for DI pipes 200 mm bore with spigot and socket ends centrifugally cast class K-9 pressure pipe for water supply ISI marked ( IS-1536 of 2001 as amended till date ) including suitable ring tyton joint & rubber ring, laid in trenches in proper alignment including testing complete including taking up or down unserviceable CI/DI water mains 200mm bore, alongwith fittings all as specified and directed.

M&L for DI pipes 150 mm bore with spigot and socket ends centrifugally cast class K-9 pressure pipe for water supply ISI marked ( IS-1536 of 2001 as amended till date ) including suitable ring tyton joint & rubber ring, laid in trenches in proper alignment including testing complete including taking up or down unserviceable CI/DI water mains 150mm bore, alongwith fittings all as specified and directed.

S&F sluice valve cast iron 150 mm bore long body both ends flanged as per IS-14846 and drilled with stainless steel spindle, iron wheel head and as per pressure rating PN 1.6, Class I, ISI marked alongwith nuts, bolts, washers , gaskets etc. and fixed in position including dismantling and taking out old unserviceable sluice valve from valve chamber / trenches etc complete all as specified and as directed

All as per serial item No. 105 but 200 mm bore.

M&L for dismantaling damaged and broken valve chamber of size 2000 mm x 2000 mm x1800 mm including unserviceable rusted MS cover complete without distrubing the existing pipe lines, valves and constructing new valve chamber including necessary earth work in any type of soil ,PCC 1:3:6 in base concrete 100 mm thick ,brick work in CM (1:6) with 10 mm thick plaster internally and 15 mm thick externally in CM (1:4) ,6 mm thick MS sheet cover with hinges and locking arrangements fixed to angle iron frame made out of 50 mm x 50 mm x 6 mm MS angle complete with two coats of synthetic enamelled paint over a coat of red oxide on all steel work and three coats of white washing on plastered surface of valve chamber complete all as specified and as directed

M&L for cutting existing road/hard standing surfaces to a depth of 60 cm and 50 cm width and getting out for laying under ground pipe including returning filling in, watering well ramming in layers not exceeding 25cm in soil and filling the trench top with 15 cm thick PCC 1:2:4, type B1 (using 20 mm graded stone aggregate) and making good the disturbed surface complete all as specified and as directed

Taking down carefully copper/aluminum point wiring (Light, Fan, Socket or power) complete including fittings such as switches, ceiling rose, regulator, sockets etc and making good disturbed surfaces of walls, floors etc and matching with existing surface complete all as specified and as directed.

M&L for point wiring (Light Poin) complete with 1.5 Sqmm single core multistranded copper conductor FRLSH , PVC insluated and unsheathed cable 650/1100 volts grade, confirming to IS-694 1990, drawn through and including PVC casing capping 32mm /25 mm width with all accessories as specified with modular cover plate with frame and modular metal flux boxes, blank plate for mounting fitting & fixture like switches sockets and fan regulators etc including copper earth contunity wire for PVC insulated of size 1.5 Sqmm for one light point controlled by one way switch complete all as specified and as directed.

All as per serial item No. 112 but for one fan point controlled by one way switch and regulator.

All as per serial item No.112 but for one 3 pin socket outlet, 5 Amps on same board.

All as per serial item No 112 but for one 3 pin socket outlet , 5 Amps on independent board but below the switch board of light points in the same vertical plane

All as per serial item No. 112 but for one 3 pin socket outlet, 5 Amps on independent board complete all as specified and as directed.

All as per serial item No 112 but for one bell point controlled by one bell push.

All as per serial item No 112 but for one light point controlled by two, two way switch.

All as per serial item No.112 but with 4.0 Sqmm copper conductor cable for socket outlet 15 Amps complete all as specified and as directed.

S&F modular switch, single pole, one way, 5/6 Amps, 1 module complete all as specified and as directed.

S&F modular switch, single pole, one way, 16 Amps, 1 module complete all as specified and as directed

S&F modular socket, 6 Amp, 2/3 pin, combined, 2 module complete all as specified and as directed

S&F modular socket, 6 A/16 Amp, 2/3 pin, combined, 2 module complete all as specified and as directed.

S&F modular bell switch, 5/6 Amp, 1 module complete all as specified and as directed.

S&F modular switch, 2 way, 1 module complete all as specified and directed.

S&F modular fan regulator, step type, 120W, 2 module complete all as specified and as directed

S&F ceiling rose, surface bakelite, three terminal type complete all as specified and as directed.

S&F in repairs, decorative, ultra slim, square profile LED lighting fixture with extruded polycarbonate, environmental friendly , energy efficient of capacity 18 Watt, appx 4 feet long, 6500K with inbuilt driver complete fitting and all other accessories fitting arrangements including connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and as directed

S&F in repairs, decorative, ultra slim, square profile LED lighting fixture with extruded polycarbonate,environmental friendly, energy efficient of capacity 10 Watt, 2 feet long, 3000 K with inbuilt driver complete fitting and all other accessories fitting arrangements including connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and as directed

S&F in repairs, LED luminaire, 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser, soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and as directed

S&F in repairs, LED light fitting 1x 9W / 1X10W bulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size complete all as specified and as directed

S&F in repairs, lamp holder, PVC/Polycarbonate type with back plate suitable for batten fittings complete all as specified and as directed.

S&F in repairs, lamp LED 9/10 Watt, 230 volts 50 Hz AC complete all as specified and as directed.

S&F in repairs, 35/40 Watt building mounted LED Security light fitting complete made up of pressure die cast housing with toughned glass and individual high power LEDs with secondary optics, IP66 protection and impact resistance of IK07 & 10KV external SPD, including GI bracket made out of GI pipe 40/50 mm bore, medium grade pipe 1.2 m long bend to shape required fixed to pole / wall with 02 Nos MS clamps made out of flat iron 40 x 5 mm including nuts, bolts and washer, painting with two coats aluminium paint over a coat of primer, suitable for LED fitting, complete all as specified and directed by Engr in Charge.

S&F in repairs MCB DB double door 4 way TPN with suitable rated busbar 240 V complete all as specified and as directed.

S&F in repairs MCB DB double door 8 way SPN with suitable rated busbar 240 V complete all as specified and as directed

S&F in repairs, MCB DB double door 4 way SPN with suitable rated busbar 240 V complete all as specified and as directed

S&F in repairs, MCB DB double door 12 way SPN with suitable rated busbar 240 V complete all as specified and as directed

S&F in repairs, of MCB TPN, C Curve 40-100 Amps, 415 V complete all as specified and as directed.

S&F in repairs, MCB single pole & Neutral (DP) 240 volts 40-63 Amps "C" curve complete all as specified and as directed.

S&F in repairs, MCB single pole 240 volts 6 to 32 Amps "C" curve complete all as specified and as directed.

S&F in repairs, single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB of capacity 20 Amp 240 Volts complete all as specified and as directed.

M&L for sub main wiring with 2 runs of 4.0 sqmm, single core, PVC insulated & unsheathed cable, conforming to IS-694, 1100 volts with copper conductor, multi stranded, drawn in and including suitable size PVC Casing Caping (ISI marked) with all accessories such as Tees, Elbows, junction box etc as requied alongwith one run of 4.0 sqmm single core PVC insulated & unsheathed copper conductor as continuous earth wire dolly and connecting to existing main switch board / distribution board of each building as ordered and testing on completion including taking down old submain wiring and any type of casing/caping/Conduit, complete all as specified and as directed. Note : Two runs of 4.0 Sqmm cable, one run of 4.0 Sqmm cable and one run of PVC casing/caping shall be measured as one unit all as specified and as directed.

M&L for sub main wiring with 2 runs of 2.5 sqmm, single core, PVC insulated & unsheathed cable, conforming to IS-694, 1100 volts with copper conductor, multi stranded, drawn in and including suitable size PVC casing caping (ISI marked) with all accessories such as Tees, Elbows, junction box etc as requied alongwith one run of 2.5 sqmm single core PVC insulated & unsheathed copper conductor as continuous earth wire dolly and connecting to existing main switch board / distribution board of each building as ordered and testing on completion including taking down old submain wiring and any type of casing/caping/conduit, complete all as specified and as directed. Note : Two runs of 2.5 Sqmm cable, one run of 2.5 Sqmm cable and one run of PVC casing/caping shall be measured as one unit all as specified and as directed.

S&F in repairs, post top lantern LED type 20 watt 230 watt volts AC outdoor type with decorative post top for 360 degree indirect light IP 65 protection with impact and corrosion resistant complete with driver and lamp complete including suitable size of GI pipe as per lamp size including connection and testing complete all as specified and as directed.

Supply, laying and testing 50 Sqmm 3.5 Core, XLPE insulated, PVC sheathed, conforming to relevant IS, ISI marked, earthed system, armoured heavy duty, electric cable with aluminium conductor, 1100 volts grade, in trenches/wall/floor/pole complete and making connection including suitable size Aluminium lugs, including taking out existing cable and cable covers all as specified and as directed

M&L for double walled corrugated (DWC) HDPE pipe of outer dia 50mm and internal dia 38mm including 90 degree bends with coupler and rubber ring laid in trenches of size 50 mm suitable for cable protection of size 2 core 10 sqmm to 3.5 core 70 Sqmm all as specified and as directed.

S&F 40 mm bore, galvanised steel tubing, light grade, ISI marked, for protection of under ground cable on pole/wall/under road including taking out old unserviceable pipe complete all as specified and as directed.

Supply, fixing and testing, ALL-IN-ONE Solar Street Light fitting, 20 Watts LED lamp, Range -(2 days backup), including LED Light, MPPT SCC, Mono Crystalline SPV Panel, LiFeP04 Battery with tamper proof MS box with corrosion resistance paint suitable for battery , bend pipe and clamps suitable for mounting lamps fixtures complete including providing HDG tubular pole 6 m TUB Pole(B) above ground, designed to specifycally for Solar light fitting, including PCC work & foundation (as per manufacturers instructions), earth work if required for embedding the pole in ground, including suitable size of cable, complete all as specified and as directed. Make- Havells, FG code LHSTAKU7CBAF020 HSN Code 8541 or equivalent model in Phillips/ Wipro/ Crompton/HPL/Luker/Halonix.

M&L for earthing complete with galvanised steel earth plate electrode, 60cm x 60cm x 6.0 mm thick, burried directly in ground(earth pit not less than 2.25metre deep below normal ground level) with top edge of earth plate not less than 1.5 metre below normal ground level, connected to and including galvanised earth lead wire of 4 mm dia from earth pit to each qtr DB by means of nuts & bolts, check nuts and washers of galvanised including PCC pit of 1:2:4, type B-1, cover reinforced with XPM weight not less than 4 Kg/Sqm and 6mm dia bar handle, mild steel angle iron 25 x 25 x 3mm in frame, excavation and earth work in any type of soil, charcoal dust, salt, light grade GI watering pipe 20mm dia with funnel and wire -mesh and medium grade GI protection pipe of 15mm bore from top edge of earth plate upto main distribution board complete all to as shown in electrical plate no 3 of MES sch 2009 (Part I), including taking out old earthing connected main switch board all as specified and testing on completion all as spcified and as directed.

Bhirud Electric Stores

M/S K. K. ENTERPRISES

CHAUDHARY AND ASSOCIATES