Construction work of a New Inspection Bungalow in Chintamani Assembly constituency of Chikkaballapur District

Construction work of a New Inspection Bungalow in Chintamani Assembly constituency of Chikkaballapur District(Ground floor)

Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with ...

Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disposal of unserviceable ...

Earth work in surface excavation by mechanical means for lowering & leveling the ground without blasting for all works other than foundation in Ordinary/ Soft rock & depth not exceeding 300mm as per d...

Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...

Excavation in hard rock of all toughness including boulders above 3.1. 0.6 m diameter (0.113 cum) for canals, cut-off trench of embankments, filter / catch water drains and other appurtenent...

Providing and fixing 25mm diameter steel anchor dowel in hard rock including drilling hole of 32 mm diameter up to 0.75 mtrs depth, placing the dowel in position and effectively grouting the hole with...

Loading and Unloading of Stone Boulder/Stone aggregates/ Sand/Kankar/Moorum. ---- including the cost and conveyance of all materials, Curing, cost of labour hire charges of equipment and machine...

Providing and injecting chemical emulsion for Pre-constructional Anti-Termite Treatment, creating continuous chemical barrier under and around the column pits, walls, trenches, basement excavation, to...

Filling approved earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and ...

Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes...

Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with supe...

Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with supe...

Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra...

Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with supe...

Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with supe...

Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with supe...

Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with supe...

Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with supe...

Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with supe...

Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with supe...

Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra...

Providing lath plaster with cement mortar 1:3, 5cms thick with 6mm dia mild steel bars at 20 cms. c to c both horizontally and vertically fixed with chicken mesh for drop chajja,facia, backing to cup ...

Supplying, fitting and placing TMT FE 550/550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying ...

Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2...

Providing and constructing load bearing wall with Solid Concrete blocks of size 400x100x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2...

Providing Salwood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and side c...

Fixing of door frame in an existing opening including embedding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1:3:6 of 20mm and down size grani...

Providing and fixing Stainless Steel Fixtures conforming to 304 graded steel as per direction of engineer in charge.SS Handles 300mm ---- including the cost and conveyance of all materials, Curing, co...

Providing and fixing Stainless Steel Fixtures conforming to 304 graded steel as per direction of engineer in charge.SS Aldrop 16mm dia, 300mm ---- including the cost and conveyance of all materials, C...

Providing and fixing Stainless Steel Fixtures conforming to 304 graded steel as per direction of engineer in charge.SS Tower Bolts 200x10mm ---- including the cost and conveyance of all materials, Cur...

Providing and fixing Stainless Steel Fixtures conforming to 304 graded steel as per direction of engineer in charge.SS hinges 100 mm ---- including the cost and conveyance of all materials, Curing, co...

Providing and fixing Stainless Steel Fixtures conforming to 304 graded steel as per direction of engineer in charge.SS Door stopper 75mm ---- including the cost and conveyance of all materials, Curing...

Providing and fixing chromium plated brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete. ---- including the cost and ...

Providing and fixing expansion hold fasteners on C.C. /R.C.C./Brick masonry surface backing including drilling necessary holes and the cost of bolt etc complete. Fastener with threaded dia 12 ...

Supplying and fixing new teak wood beads wherever necessary including cost of materials, labour, complete as per specifications. ---- including the cost and conveyance of all materials, Curing, cost o...

Providing and fixing flush door shutter made out of solid core block board type, well seasoned , chemicaly treated hard wood battens and internal frame with minimum 45 mm wide wooden frame alround doo...

Providing & fixing of 3track x 2panel sliding windows made out of multi chambered UPVC(Matching to RAL9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) ...

Providing & fixing of louvered ventilator made out of multi chambered UPVC(Matching to RAL9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead fre...

Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to stee...

Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid door/window/Clerestory windows & other Frames/ Chowkhat comprising of virgin PVC polymer of K value 58-60 (Suspensi...

Providing and fixing factory made Green certified, Anti Termite, UV resistant, high water absorbant single extruded WPC (Wood PolymerComposite) solid plain flush door shutter of required size comprisi...

Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width u...

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per sp...

Providing 12 mm cement plaster finished with a floating coat of neat cement of mix :1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, pr...

Providing 15 mm cement plaster on rough side of single or half brick wall finished with a floating coat of neat cement of mix: 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corne...

Providing 20 mm cement plaster of mix :1:4 (1 cement: 4 fine sand) to brick/stone masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, includi...

Providing and fixing suitable plaster mesh 100mm wide manufactured out of hot dipped galvanised iron of nominal thickness 0.35mm with a zinc coating of 120g/m2 width, along route of walls chipped for ...

Forming groove of uniform size in the top layer of plaster as per approved pattern including repair to the edges of panels and finishing the groove complete as per specific...

Providing and laying Vitrified tiles with thickness 9-10 mm in different sizes with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, over 12 mm...

Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 m...

Providing and laying flooring and steps fine machine polished granite stone slabs 20 mm thick on cement mortar bed 1:6, 20 mm thick, and joints finished with cement mortar 1:3 over existing cement co...

Providing and laying Black Lapotra Granite stone flooring in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18mm thick stone slab over 20 mm...

Providing and laying Polished Glazed Vitrified tiles with thickness 10 mm in floor with different sizes with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufactur...

Providing and fixing of wall cladding using 20mm thick gang saw water cut Shiva gold granite, grey granite in CM 1:3 (1 cement : 3 coarse sand) proportion cut to required shape, pattern with paper j...

Providing 15 mm cement plaster on the rough side of single or half brick wall of mix 1:4 (1 cement: 4 fine sand) including rounding off corners wherever required smooth rendering, providing and removi...

Providing and supplying crystalline integral concrete waterproofing admixture that waterproofs concrete by forming crystals deep in the pores, capillaries and microcracks of the c...

Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thick- ness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades,...

Providing skirting, dadooing, rises of steps with colour glazed tiles 6mm thick on 10mm thick cement plaster 1:3 and jointed with white cement slurry over existing rough plaster surface using glazed t...

Providing and fixing 18 mm thick gang saw cut granite of any color and shade, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias an...

Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitt...

Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops an...

Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 g/L and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of r...

Applying priming coat: With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/ steel works including preparing the surface after thorougly cleaning ...

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and for...

Applying priming coat: With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood) including preparing the surface after thorougly cleaning oil, grease, di...

Polishing in high gloss/matt finish melamine clear polish on wood work in required color/wooden shade texture with following process in the sequence as detailed below:

1. The surface to be polished is...

Providing and supplying aluminium extruded tubular and other aluminium sections as per the architectural drawings and approved drawings of Chief Architect, GoK.The aluminium quality shal...

Providing, assembling and supplying vision glass panels (IGUs) comprising of hermeticallysealed 6 1 2 6 mm insulated glass (double glazed) vision panel units of size and shape as required and s...

Polyurethane based water proofing for Retaining Wall Providing and laying water proofing treatment to the Retaining wall area with PU Elastomeric Single component liquid applied, cold applied, mois- t...

Providing weep holes in Brick masonry/Plain/ Reinforced concrete abutment, wing wall/ return wall with PVC Pipe 110mm outer dia at 2 kg per m2, extending through the full width of the structure with s...

Providing & fixing 100% Polyester Curtains with specification of regular wash as per direction of Engineer in charge ---- including the cost and conveyance of all materials, Curing, cost of la...

Providing and fixing brass curtain rods of wall thickness 1.25 mm with two brass brackets fixed with brass screws and wooden plugs etc. wherever necessary complete.20 mm diameter. ---- including the c...

Providing and fixing of expansion joint system related with floor location as per drawings and direction of Engineer-In-Charge. The joints system will be of extruded aluminum base members, self aligni...

Providing and fixing of expansion joint system related with wall joint (internal/external) location as per drawings and direction of Engineer-InCharge. The joints shall be of extruded aluminum base me...

Providing and fixing of expansion joint system of approved make and manufactures for various roof locations as per approved drawings and direction of Engineer-In-Charge. The joints shall be of extrude...

Construction work of a New Inspection Bungalow in Chintamani Assembly constituency of Chikkaballapur District(First floor)

Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra...

Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra...

Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra...

Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra...

Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra...

Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra...

Supplying, fitting and placing TMT FE 550/550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying ...

Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2...

Providing and constructing load bearing wall with Solid Concrete blocks of size 400x100x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2...

Providing Salwood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and side c...

Fixing of door frame in an existing opening including embedding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1:3:6 of 20mm and down size grani...

Providing and fixing Stainless Steel Fixtures conforming to 304

graded steel as per direction of engineer in charge.SS Handles 300mm ---- including the cost and conveyance of all materials, Curing, co...

Providing and fixing Stainless Steel Fixtures conforming to 304

graded steel as per direction of engineer in charge.SS Aldrop 16mm dia, 300mm ---- including the cost and conveyance of all materials, C...

Providing and fixing Stainless Steel Fixtures conforming to 304 graded steel as per direction of engineer in charge.SS Tower Bolts 200x10mm ---- including the cost and conveyance of all materials, Cur...

Providing and fixing Stainless Steel Fixtures conforming to 304 graded steel as per direction of engineer in charge.SS hinges 100 mm ---- including the cost and conveyance of all materials, Curing, co...

Providing and fixing Stainless Steel Fixtures conforming to 304 graded steel as per direction of engineer in charge.SS Door stopper 75mm ---- including the cost and conveyance of all materials, Curing...

Providing and fixing chromium plated brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete. ---- including the cost and ...

Providing and fixing expansion hold fasteners on C.C. /R.C.C./Brick masonry surface backing including drilling necessary holes and the cost of bolt etc complete. Fastener with threaded dia 12 ...

Supplying and fixing new teak wood beads wherever necessary including cost of materials, labour, complete as per specifications. ---- including the cost and conveyance of all materials, Curing, cost o...

Providing and fixing flush door shutter made out of solid core block board type, well seasoned , chemicaly treated hard wood battens and internal frame with minimum 45 mm wide wooden frame alround doo...

Providing & fixing of 3track x 2panel sliding windows made out of multi chambered UPVC(Matching to RAL9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) ...

Providing & fixing of louvered ventilator made out of multi chambered UPVC(Matching to RAL9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead fre...

Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to stee...

Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid door/window/Clerestory windows & other Frames/ Chowkhat comprising of virgin PVC polymer of K value 58-60 (Suspensi...

Providing and fixing factory made Green certified, Anti Termite, UV resistant, high water absorbant single extruded WPC (Wood PolymerComposite) solid plain flush door shutter of required size comprisi...

Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width u...

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per sp...

Providing 12 mm cement plaster finished with a floating coat of neat cement of mix :1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, pr...

Providing 15 mm cement plaster on rough side of single or half brick wall finished with a floating coat of neat cement of mix: 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corne...

Providing 20 mm cement plaster of mix :1:4 (1 cement: 4 fine sand) to brick/stone masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, includi...

Providing and fixing suitable plaster mesh 100mm wide manufactured out of hot dipped galvanised iron of nominal thickness 0.35mm with a zinc coating of 120g/m2 width, along route of walls chipped for ...

Forming groove of uniform size in the top layer of plaster as per approved pattern including repair to the edges of panels and finishing the groove complete as per specific...

Providing and laying Vitrified tiles with thickness 9-10 mm in different sizes with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, over 12 mm...

Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 m...

Providing and laying flooring and steps fine machine polished granite stone slabs 20 mm thick on cement mortar bed 1:6, 20 mm thick, and joints finished with cement mortar 1:3 over existing cement co...

Providing and fixing of wall cladding using 20mm thick gang saw water cut Shiva gold granite, grey granite in CM 1:3 (1 cement : 3 coarse sand) proportion cut to required shape, pattern with paper j...

Providing 15 mm cement plaster on the rough side of single or half brick wall of mix 1:4 (1 cement: 4 fine sand) including rounding off corners wherever required smooth rendering, providing and removi...

Providing and supplying crystalline integral concrete waterproofing admixture that waterproofs concrete by forming crystals deep in the pores, capillaries and microcracks of the c...

Providing and laying cinder concrete in cement 1:15 ( 1 cement : 15 cinder of 12.5mm nominal gauge) on terraced roof or sunken slabs, laid to slope compacting, including cost of materials, labour, c...

Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thick- ness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades,...

Providing skirting, dadooing, rises of steps with colour glazed tiles 6mm thick on 10mm thick cement plaster 1:3 and jointed with white cement slurry over existing rough plaster surface using glazed t...

Providing and fixing 18 mm thick gang saw cut granite of any color and shade, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias an...

Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitt...

Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops an...

Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 g/L and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of r...

Applying priming coat: With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/ steel works including preparing the surface after thorougly cleaning ...

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and for...

Applying priming coat: With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood) including preparing the surface after thorougly cleaning oil, grease, di...

Polishing in high gloss/matt finish melamine clear polish on wood work in required color/wooden shade texture with following process in the sequence as detailed below:

1. The surface to be polished is...

Providing & fixing 100% Polyester Curtains with specification of regular wash as per direction of Engineer in charge ---- including the cost and conveyance of all materials, Curing, cost of la...

Providing and fixing brass curtain rods of wall thickness 1.25 mm with two brass brackets fixed with brass screws and wooden plugs etc. wherever necessary complete.20 mm diameter. ---- including the c...

Construction work of a New Inspection Bungalow in Chintamani Assembly constituency of Chikkaballapur District(Second floor)

Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra...

Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra...

Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra...

Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra...

Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra...

Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra...

Supplying, fitting and placing TMT FE 550/550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying ...

Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2...

Providing and constructing load bearing wall with Solid Concrete blocks of size 400x100x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2...

Providing Salwood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and side c...

Fixing of door frame in an existing opening including embedding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1:3:6 of 20mm and down size grani...

Providing and fixing Stainless Steel Fixtures conforming to 304 graded steel as per direction of engineer in charge.SS Handles 300mm ---- including the cost and conveyance of all materials, Curing, co...

Providing and fixing Stainless Steel Fixtures conforming to 304 graded steel as per direction of engineer in charge.SS Aldrop 16mm dia, 300mm ---- including the cost and conveyance of all materials, C...

Providing and fixing Stainless Steel Fixtures conforming to 304 graded steel as per direction of engineer in charge.SS Tower Bolts 200x10mm ---- including the cost and conveyance of all materials, Cur...

Providing and fixing Stainless Steel Fixtures conforming to 304 graded steel as per direction of engineer in charge.SS hinges 100 mm ---- including the cost and conveyance of all materials, Curing, co...

Providing and fixing Stainless Steel Fixtures conforming to 304 graded steel as per direction of engineer in charge.SS Door stopper 75mm ---- including the cost and conveyance of all materials, Curing...

Providing and fixing chromium plated brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete. ---- including the cost and ...

Providing and fixing expansion hold fasteners on C.C. /R.C.C./Brick masonry surface backing including drilling necessary holes and the cost of bolt etc complete. Fastener with threaded dia 12 ...

Supplying and fixing new teak wood beads wherever necessary including cost of materials, labour, complete as per specifications. ---- including the cost and conveyance of all materials, Curing, cost o...

Providing and fixing flush door shutter made out of solid core block board type, well seasoned , chemicaly treated hard wood battens and internal frame with minimum 45 mm wide wooden frame alround doo...

Providing & fixing of 3-track x 2-panel sliding windows made out of multi chambered UPVC (Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastom...

Providing & fixing of louvered ventilator made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead fr...

Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to stee...

Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid door/window/Clerestory windows & other Frames/ Chowkhat comprising of virgin PVC polymer of K value 58-60 (Suspensi...

Providing and fixing factory made Green certified, Anti Termite, UV resistant, high water absorbant single extruded WPC (Wood PolymerComposite) solid plain flush door shutter of required size comprisi...

Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width u...

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per sp...

Providing 12 mm cement plaster finished with a floating coat of neat cement of mix :1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, pr...

Providing 15 mm cement plaster on rough side of single or half brick wall finished with a floating coat of neat cement of mix: 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corne...

Providing 20 mm cement plaster of mix :1:4 (1 cement: 4 fine sand) to brick/stone masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, includi...

Providing and fixing suitable plaster mesh 100mm wide manufactured out of hot dipped galvanised iron of nominal thickness 0.35mm with a zinc coating of 120g/m2 width, along route of walls chipped for ...

Forming groove of uniform size in the top layer of plaster as per approved pattern including repair to the edges of panels and finishing the groove complete as per specific...

Providing and laying Vitrified tiles with thickness 9-10 mm in different sizes with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, over 12 mm...

Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 m...

Providing and laying flooring and steps fine machine polished granite stone slabs 20 mm thick on cement mortar bed 1:6, 20 mm thick, and joints finished with cement mortar 1:3 over existing cement co...

Providing and fixing of wall cladding using 20mm thick gang saw water cut Shiva gold granite, grey granite in CM 1:3 (1 cement : 3 coarse sand) proportion cut to required shape, pattern with paper j...

Providing 15 mm cement plaster on the rough side of single or half brick wall of mix 1:4 (1 cement: 4 fine sand) including rounding off corners wherever required smooth rendering, providing and removi...

Providing and supplying crystalline integral concrete waterproofing admixture that waterproofs concrete by forming crystals deep in the pores, capillaries and microcracks of the c...

Providing and laying cinder concrete in cement 1:15 ( 1 cement : 15 cinder of 12.5mm nominal gauge) on terraced roof or sunken slabs, laid to slope compacting, including cost of materials, labour, c...

Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thick- ness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades,...

Providing skirting, dadooing, rises of steps with colour glazed tiles 6mm thick on 10mm thick cement plaster 1:3 and jointed with white cement slurry over existing rough plaster surface using glazed t...

Providing and fixing 18 mm thick gang saw cut granite of any color and shade, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias an...

Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitt...

Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops an...

Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 g/L and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of r...

Applying priming coat: With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/ steel works including preparing the surface after thorougly cleaning ...

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and for...

Applying priming coat: With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood) including preparing the surface after thorougly cleaning oil, grease, di...

Polishing in high gloss/matt finish melamine clear polish on wood work in required color/wooden shade texture with following process in the sequence as detailed below:

1. The surface to be polished is...

Providing & fixing 100% Polyester Curtains with specification of regular wash as per direction of Engineer in charge ---- including the cost and conveyance of all materials, Curing, cost of la...

Providing and fixing brass curtain rods of wall thickness 1.25 mm with two brass brackets fixed with brass screws and wooden plugs etc. wherever necessary complete.20 mm diameter. ---- including the c...

Construction work of a New Inspection Bungalow in Chintamani Assembly constituency of Chikkaballapur District(TERRACE floor)

Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra...

Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra...

Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra...

Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra...

Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra...

Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra...

Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tyin...

Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2...

Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a pri...

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surfa...

Providing 12 mm cement plaster finished with a floating coat of neat cement of mix :1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, pr...

Providing 15 mm cement plaster on rough side of single or half brick wall finished with a floating coat of neat cement of mix: 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corn...

Newly Constructed Roof/Podium with PU Waterproof coating - Above 500 m2. Providing and Applying single component Polyurethane based cold applied seamless waterproofing coating to the RCC surface like ...

Forming groove of uniform size in the top layer of plaster as per approved pattern including repair to the edges of panels and finishing the groove complete as per specific...

Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops an...

Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 g/L and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of r...

Providing and fixing MS ladder between landings, 45 cms wide using angle iron of specified sizes, 20mm MS bars at 25 cms. centre to centre, with necessary supports of same angle iron etc. as directe...

Providing and fixing Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of appr...

Providing and fixing 6mm Clear/opal white/solar bronze/ blue/green tinted Multi wall poly carbonate sheet for Tubular structure. The work including cost of all materials, labour charges and usage ch...

Construction work of a New Inspection Bungalow in Chintamani Assembly constituency of Chikkaballapur District(False Ceiling)

Providing & Fixing of Intergral Densified Micro Look edged Eco Friendly Lightweight Calcium Silicate Suspended Ceiling System in Module Size of 600x600x15mm Suitable with Exposed GI Silhouette Profile...

Providing & Fixing of Intergral Densified Micro Look edged Eco Friendly Lightweight Calcium Silicate Suspended Ceiling System in Module Size of 600x600x15mm Suitable with Exposed GI Silhouette Profile...

Providing and fixing in position 12mm thick plaster of paris (Gypsum anhydrous) for ceiling reinforced with hessian cloth flat surface with ceiling tiles up to a height of 5 m above...

Providing and fixing in position 12mm thick plaster of paris (Gypsum anhydrous) for ceiling reinforced with hessian cloth flat surface with ceiling tiles up to a height of 5 m above floor level over a...

Construction work of a New Inspection Bungalow in Chintamani Assembly constituency of Chikkaballapur District(Furniture Works))

Teak Wood Dinning Table Size 8'X4' : Made out of Teak wood using 4" X 4" plain or turning leg, Table frame 4" X 1.25" Top 18mm plywood with sunmica with 3" Teak Wood Border. Table shall be neatly fini...

Providing and fixing Single seater Sofa with cushion of size 3(L)x2.5(W) X2.75(H) ft made of upholstery fabric with seats fitted with padding, springs, webbing and as per direction of engineer in char...

Providing and fixing Two seater Sofa with cushion of size 5(L)x2.5(W) X2.75(H) ft made of upholstery fabric with seats fitted with padding, springs, webbing and as per direction of engineer in charge ...

Providing and fixing Three seater Sofa with cushion of size 7(L)x2.5(W) X2.75(H) ft made of upholstery fabric with seats fitted with padding, springs, webbing and as per direction of engineer in charg...

Teak Wood Dinning Square Leg Chair, Seat With Cushion back with patti : (Rose wood model) Made out of Teak Wood leg size 2.5"x2.5" seat patties of size 3"x1.25"seat with cushion, back with patties. Ch...

Providing & fixing of Tea table 900mm x 750mm 450mm with 12mm thick ethched tempered glass with bevelled drawing made out of BWP ply and out faces laminated with 4mm thick veneer or 1mm thick laminate...

Providing And Supplying hardwood Centre Table of Approved Design, Finish with Polish And Top Covered With 6mm palin Glass with Alround polish, Complete. including the cost of all materials, labour and...

Single Cot: of size 75''X30''X18'' using 18mm ply with one side laminate / 16g sheet for the bed and the framework is made by using 1''X1'' rectangular/ Round of 16g and 1''X1'' Square/round pipe for ...

Teak Wood Sunrise Cot Double : Of size 6.5'x5' (without side box) Head side -5'x3"x2"-02 Nos. Panels - 5'x32"x1.5"-01 No. Average. Leg side-1.5'x3"x2"-02 Nos. Panels - 5'x18"x1.5"-01 No.- Average. Bas...

Providing and supplying Single size 6ft x 2.5ft Soft PU foam 5 inch thick mattress of reputed make with better enhanced air circulation & breathability & sleeping comfort of size as per direction of e...

Providing and supplying King Size 6ft x 6ft Soft PU foam 5 inch thick mattress with better enhanced air circulation & breathability & sleeping comfort of size as per direction of engineer in charge --...

6 Supplying and fixing SIDE TABLE of size 400x400x400 mm square Smtr. shape made out using 19mm thick Plywood with 4mm thick veneer sheet for all exposed edge faces with suitable adhesives. complete. ...

9 Providing and fixing of Dessing table by using 19mm Commercial Smtr. plywood with approved 1mm laminate for all exprosed area over 12mm plywood on backside. Fixing 6mm mirrror over 19mm plywood. ope...

Teak Wood Stool : Made out of Teak Wood of height 18" including top, which is of size 12"x12" legs to be of 2"x2" thickness and top patties should be of 3"x1" thickness with bottom supporting patties ...

Manufacturing, supplying and fixing wooden ward robe of 0.60m deep Smtr. using 25mm thick water proof block board for shutter and 19mm plywood for allround ward robe, openable shutters with 25mm x 6mm...

18 Providing and fixing U Shaped ’CONFERENCE TABLE" of overall size 7950mm x 2600mm x 750mm using 19mm Plywood for legsat suitable intervals , horizontal support at top and horizontal support at bot...

Supplying and fixing Medium back Leatherette Chairs with knee tilt , with Gas Lift, Lumbar support of featherlite/ Godrej or equivalent make, including the cost of all materials, labour and transporta...

Providing and Supplying Medium Back Revolving chairs with Mesh Back And Soft Cushioning Seat, Fixed lumber Support and Gas Lift, Knee tilt Mechanism of featherliteGodrej or equivalent make, including ...

Supplying and providing Computer revolving chairs with height adjustment arms of Featherlite or equivalent make etc., The work includes cost of all materials, labour charges, with all lead and lift, l...

Construction work of a New Inspection Bungalow in Chintamani Assembly constituency of Chikkaballapur District(EXTERNAL BITUMINOUS ROAD WORK)

Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut ...

Mechanical Means -

Earth work in surface excavation by mechanical means for lowering & leveling the ground for all works other than foundation in all kinds of soils & upto depth not exceeding 300mm a...

Mechanical Means -

Earth work excavation for Foundation by Mechanical means depth upto 1.50m, as per drawing and technical specifications, including setting out, shoring, strutting, barric...

Filling approved earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating Each deposited layer ...

Removal of Unserviceable Soil with Disposal upto a suitable distance as directed by the Engineer incharge of work. Ref to MoRT&H : IRC - 301 ---- including the cost and conveyance of all mate...

Making 50 mm x 50 mm Furrows - Making 50 mm x 50 mm furrows, 25mm/ 50mm deep, 45 degrees to the center line of the road and at one metre interval in the existing thin bituminous wearing c...

Compacting Original Ground - Compacting original ground supporting embankment - Loosening, leveling and Compacting original ground supporting embankment to facilitate placement of first layer of emba...

Granular Sub-Base - Plant Mix Method - Construction of Granular Sub-Base of required grading as per design mixing in a mechanical mix plant at OMC, carriage of mixed Material...

Wet Mix Macadam (Plant Mix Method) - Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC ...

Prime Coat over WMM/WBM - Providing and applying primer coat with SS1 grade Bitumen Emulsion on prepared surface of granular base including cleaning of road surface and spraying ...

Tack coat on Bituminous surface - Providing and applying tack coat with RS1 Bituminous Emulsion using emulsion pressure distributor at the rate of 0.20 kg/m2 on the prepared bituminous surface clean...

Bituminous Macadam Grading - I for traffic <20 MSA - Providing and laying Bituminous Macadam with 120 TPH capacity hot mix plant batch type using crushed aggregates of speci...

Semi Dense Bituminous Concrete - Providing and laying Semi Dense Bituminous Concrete with 40/60 TPH capacity hot mix plant batch type using crushed aggregates of specified grading pre...

Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates ...

Kerb Stones - Supplying and fixing M15 grade precast cement concrete Kerb stones for Roadway, Sidewalls and gutters fixed with CM 1:3 fixed and finsihed in line as per direction of Engineer i...

Construction of Median and Island with Soil Taken from Roadway Cutting - Construction of Median and Island above road level with approved material deposited at site from ...

Painting Two Coats on New Concrete Surfaces - Painting two coats after filling the surface with synthetic enamel paint in all shades on new plastered concrete surfaces. Ref to MoRT&H : IRC - 8...

Construction work of a New Inspection Bungalow in Chintamani Assembly constituency of Chikkaballapur District(ROAD DRAIN)

Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut ...

Mechanical Means -

Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, stru...

Mechanical Means -

Earth work excavation for Foundation by Mechanical means depth upto 1.50m, as per drawing and technical specifications, including setting out, shoring, strutting, barric...

Loading and Unloading of Stone Boulder/Stone aggregates/Sand/ Kankar/Moorum. (Tipper 5.5 m3) ---- including the cost and conveyance of all materials, Curing, cost of labour hire charges of equipment a...

Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates ...

Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite...

Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite...

Providing and laying 100mm thick pre-cast cover slabs over drains & Rain pit of width not exceeding 800 mm using M20 concrete reinforced with Micro Alloyed High carbon steel with 3mm - 3ply ...

Steel Fabrication

Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting,...

Construction work of a New Inspection Bungalow in Chintamani Assembly constituency of Chikkaballapur District(PATHWAY)

Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut ...

Mechanical Means -

Earth work in surface excavation by mechanical means for lowering & leveling the ground for all works other than foundation in all kinds of soils & upto depth not exceeding 300mm a...

Earth work excavation by manual means for drains, canals, waste weir, draft, approach channels, key trenches, foundation of Buildings & bridges and such simillar works in all kinds of...

Wet Mix Macadam (Plant Mix Method) - Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC ...

Precast Cement Concrete Interlocking Blocks - Providing and laying 80mm thick factory made precast M -30 grade Cement Concrete Paver Block as per IRC SP 63:2018 & IS 15658 for Commercial Tra...

Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates ...

Kerb Stones - Supplying and fixing M15 grade precast cement concrete Kerb stones for Roadway, Sidewalls and gutters fixed with CM 1:3 fixed and finsihed in line as per direction of Engineer i...

Painting Two Coats on New Concrete Surfaces - Painting two coats after filling the surface with synthetic enamel paint in all shades on new plastered concrete surfaces. Ref to MoRT&H : IRC - 8...

Construction work of a New Inspection Bungalow in Chintamani Assembly constituency of Chikkaballapur District(LANDSCAPING)

Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut ...

Mechanical Means -

Earth work in surface excavation by mechanical means for lowering & leveling the ground for all works other than foundation in all kinds of soils & upto depth not exceeding 300mm a...

Filling approved earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating Each deposited layer ...

SCRAPPINGANDREMOVINGTOPSOIL:-Scrappingtheareabyremoving0.15msoilandremovingofunwantedplants,grassalongwithroots.25kminitialtransport,including lead, lift loading and unloading charges. (1x1x0.15mt) --...

1STDIGGING:-Diggingoftheareafordevelopinglawnincludingremovingweeds,debris if any and breaking of clumps, watering etc. (1x1x0.45mt) ---- including the cost and conveyance of all materials, Curing, co...

2NDDIGGING:-Diggingofsoilbyremovinggrassetcifanyandlevellingofthesoiletc . (1x1x0.45mt) ---- including the cost and conveyance of all materials, Curing, cost of labour hire charges of equipment and ma...

procurement of quality red earth/soil and heap around pit (1x1x0.15mt) ---- including the cost and conveyance of all materials, Curing, cost of labour hire charges of equipment and machinery, all lead...

Supply of in put ssuch as sand, FYM,Red earth in1:3:6ratio.mixingandspreadingthe mixture to 7.50cm thickness wherever required.* Red soil-0.0075cum, *Farm Yard manure-0.0225cum, * Sand-0.045cum ---- i...

Procurement of quality lawn grass Bermuda Grass ---- including the cost and conveyance of all materials, Curing, cost of labour hire charges of equipment and machinery, all lead and lift, loading and ...

Procurement of quality lawn grass Mexican Grass ---- including the cost and conveyance of all materials, Curing, cost of labour hire charges of equipment and machinery, all lead and lift, loading and ...

Labour Charges mixingInputsasperprescribedproportionandquantityandspreading,applyingfertilizers,digging,levelling,anddibblingwithlawngrassataspacingof5cmx5cm& as per the direction of the Officer in ch...

Labour Charges mixingInputsasperprescribedproportionandquantityandspreading,applyingfertilizers,digging,levelling,anddibblingwithlawngrassataspacingof5cmx5cm& as per the direction of the Officer in ch...

Upto 8000.0 m2 (2.0 Acres)-WORK TO BE UNDER TAKEN DURING MAINTENANCE:-Watering : The plants and lawns in the garden should be watered frequently as required looking to the climate, soil and plant cond...

Planting of trees-Digging pits of size 0.75 x 0.75x 0.75m, filling 50% of the pit with top soil and remaining 50% of pit with 1:2:3 proportion ofsand (0.035cum) FYM (0.070cum) Red earth (0.105 cum) an...

Construction work of a New Inspection Bungalow in Chintamani Assembly constituency of Chikkaballapur District(COMPOUND WALL)

Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut ...

Mechanical Means -

Earth work in surface excavation by mechanical means for lowering & leveling the ground for all works other than foundation in all kinds of soils & upto depth not exceeding 300mm a...

Mechanical Means -

Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, stru...

Mechanical Means -

Earth work excavation for Foundation by Mechanical means depth upto 1.50m, as per drawing and technical specifications, including setting out, shoring, strutting, barric...

Loading and Unloading of Stone Boulder/Stone aggregates/Sand/ Kankar/Moorum. (Tipper 5.5 m3) ---- including the cost and conveyance of all materials, Curing, cost of labour hire charges of equipment a...

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating Each depos...

Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates ...

Steel Fabrication

Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting,...

Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates ...

Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite...

Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 con...

Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) finished with a top layer 6 mm thick cement plaster with cement mor...

Providing and fixing Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural ...

Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives with pure Acrylic Resin, UV resistant, dirt & pick up resistant, Alkali & Water resistan...

Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite...

Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite...

Construction work of a New Inspection Bungalow in Chintamani Assembly constituency of Chikkaballapur District(Road Retaining wall)

Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...

Earth work excavation for Foundation by Mechanical means depth upto 1.50m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, includin...

Loading and Unloading of Stone Boulder/Stone aggregates/ Sand/Kankar/Moorum. ---- including the cost and conveyance of all materials, Curing, cost of labour hire charges of equipment and machine...

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by r...

Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes...

Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tyin...

Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with supe...

Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with supe...

Providing and laying water proofing treatment to the Retaining wall area with PU Elastomeric Single component liquid applied, cold applied, moisture cured high tensile elastomeric PU waterproofing mem...

Construction work of a New Inspection Bungalow in Chintamani Assembly constituency of Chikkaballapur District(SUMP TANK)

Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disposal of unserviceable ...

Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...

Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...

Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...

Loading and Unloading of Stone Boulder/Stone aggregates/ Sand/Kankar/Moorum. ---- including the cost and conveyance of all materials, Curing, cost of labour hire charges of equipment and machine...

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by r...

Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes...

Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with supe...

Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with supe...

Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with supe...

Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tyin...

Polyurethane based Single Component for New Surface

Providing and laying water proofing treatment to the Roof with PU based single component elastomeric pure polyurethane based coating on New terrace/...

Providing 20 mm cement plaster of mix :1:4 (1 cement: 4 fine sand) to brick/stone masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, includi...

Providing 12 mm cement plaster finished with a floating coat of neat cement of mix :1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, pr...

Providing & fixing 455x610 mm cast iron cover with frame weight to be not less 38kgs (weight of cover 23 kgs and weight of frame 15 kgs)and necessary locking arrangements with M.S flats 32x6 mm etc & ...

Construction work of a New Inspection Bungalow in Chintamani Assembly constituency of Chikkaballapur District(BORE WELL)

Geophysical investigation at site for sinking borewells for Providing drinking water to the habitation either through the Hand Pump MWS or P.W.S.S, by vertical electrical sounding by adopting ...

Supply of ISI mark 175mm nominal bore,plain and steel casing pipe grade of steel Fe 410 of wall thickness conforming to IS 4270-2001 nd latest ammendments, electrical resistance welded steel tubes, t...

Supply and delivery at site 50mm(2”) dia heavy duty unplasticized PVC Column pipes with heavy duty collars,rubber profile ring,vibration control profile ring,freezing and turbulence free leak proof ...

Providing and fixing MS casing collars per IS 1239 (part-II) 1982 with all latest amendments if any for any dia. The thic ness of plate used for covering one end shall be 3mm (minimum). The dimension...

Providing and laying at site of wor MS asing caps as per IS 1239 (part- II) 1982 with all latest amendm nts if any for any dia. The thickness of plate used for covering one e shall be 3mm (minimum)...

Providing NP/CP 50mm dia Waste Unions conforming to ISI specifications and fixing them in position as per directions (Rates includes cost of materials fixtures and conveyance to work spot etc complete...

Providing Submersible Pump Set of 150mm dia suitable for bore well and confirming to IS 8034-2000;3Phase, SS Bowl & Impeller with Low volt Motor as per specifications, to work site as per necessary ...

Supply, installing,testing and commissioning COMMON control panel consisting of the following INCOMING:1 No set of Phase indicating lamps with SFU of suitable rating 1 No, Analog Ammeter, 1 No Analog ...

Supply and delivery at site 50mm(2”) dia heavy duty CI adopter set complete suitable for uPVC Column pipes for Submersible pumpsets ---- including the cost and conveyance of all materials, Curing, c...

Supply and delivery at site Stringing of heavy duty Naylone/PP rope with ISI etc complete suitable for Single phase Pumpsets. ---- including the cost and conveyance of all materials, Curing, cost of l...

Labour charges for Erection, Electrification and commissioning of Pump sets, including aligning and balancing of all items including supply and erection of two pair of supporting clamps, bore well cap...

Labour charges for erection of indoor type panel board and meter board units with all necessary materials and labour tools and equipments including cement concrete for foundation/bed etc,complete as p...

Supplying and drawing 3 core flat PVC sheathed submersible pump cable manufactured with electrolytic grade copper with flexible copper with low resistance conductor confirming to13:8130-1984 and virgi...

Fabricating supplying and mounting MS box made out ....SWG suitable for floor /wall mounting, fully weather proof with provision for better heat dissipation, provided with hinged front cover, equipped...

Supply and Installation / Fixing / Provision of Outdoor type Thermoplastic Modular Panel enclosure with transparent Polycarbonate Lid, shock proof, IP65 (Weather Proof), rust proof, dust proof, water ...

Supply and fixing polished wood board made of not less than 15mm thick plank on both sides of not more than 2 pieces and fixing the same to the wall using tapered inverted wooden plugs screws.20" x 20...

Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capa...

Fixing of ..... A TPST / change over switch / Contactor along with neutral link with screws, bolts, nuts and wiring using required capacity wires and circuit labelling..15A to 63A TPST ---- including ...

Supplying, fixing and wiring heavy duty low voltage capacitors conforming to IS 2834. 3 phase, 400/440 V grade, for power factor improvement of rotating machineries like induction motor. ---- includin...

Sinking of Borewell of 165mm dia clear using super fast hydraulic rig of capacity 300 PSIG & above 1100 CMF & above in all strata including over burdern upto 20 m. Fixing of casing pipes, collars and ...

Sinking of Borewell of 165mm dia clear using super fast hydraulic rig of capacity 300 PSIG & above 1100 CMF & above in all strata including over burdern upto 20 m. Fixing of casing pipes, collars and ...

Sinking of Borewell of 165mm dia clear using super fast hydraulic rig of capacity 300 PSIG & above 1100 CMF & above in all strata including over burdern upto 20 m. Fixing of casing pipes, collars and ...

Sinking of Borewell of 165mm dia clear using super fast hydraulic rig of capacity 300 PSIG & above 1100 CMF & above in all strata including over burdern upto 20 m. Fixing of casing pipes, collars and ...

Sinking of Borewell of 165mm dia clear using super fast hydraulic rig of capacity 300 PSIG & above 1100 CMF & above in all strata including over burdern upto 20 m. Fixing of casing pipes, collars and ...

Sinking of Borewell of 165mm dia clear using super fast hydraulic rig of capacity 300 PSIG & above 1100 CMF & above in all strata including over burdern upto 20 m. Fixing of casing pipes, collars and ...

Sinking of Borewell of 165mm dia clear using super fast hydraulic rig of capacity 300 PSIG & above 1100 CMF & above in all strata including over burdern upto 20 m. Fixing of casing pipes, collars and ...

Construction work of a New Inspection Bungalow in Chintamani Assembly constituency of Chikkaballapur District(SEPTIC TANK & SOAK PIT)

Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disposal of unserviceable ...

Earth work in surface excavation by mechanical means for lowering & leveling the ground for all works other than foundation in all kinds of soils & upto depth not exceeding 300mm as per drawing and te...

Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by r...

Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...

Loading and Unloading of Stone Boulder/Stone aggregates/ Sand/Kankar/Moorum ---- including the cost and conveyance of all materials, Curing, cost of labour hire charges of equipment and machiner...

Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes...

Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with supe...

Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with supe...

Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with supe...

Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tyin...

Providing and laying water proofing treatment to the Roof with PU based single component elastomeric pure polyurethane based coating on New terrace/Chajjas/ Sunken portion of WC:Bathroom, cold ...

Providing 12 mm cement plaster finished with a floating coat of neat cement of mix :1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, pr...

Providing 20 mm cement plaster of mix :1:4 (1 cement: 4 fine sand) to brick/stone masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, includi...

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, ...

Providing & fixing 455x610 mm cast iron cover with frame weight to be not less 38kgs (weight of cover 23 kgs and weight of frame 15 kgs)and necessary locking arrangements with M.S flats 32x6 mm etc & ...

Providing Brick work with common burnt clay machine moulded perforated bricks of class designation 5.0 conforming to IS: 2222 in superstructure above plinth level in cement mortar 1:6 (1 cement : 6 co...

Providing 20 mm cement plaster with cement mortar 1:3 (1 cement:

3 coarse sand) finished with a floating coat of neat cement to brick/ stone masonry including rounding off corners wherever require...

Supplying, filling, spreading & leveling stone boulders of size range 5 cm to 20 cm, in recharge pit, in the required thickness, for all leads & lifts, all complete as per direction of Engineer-in-cha...

Supplying, filling, spreading &leveling gravels of size range 5 mm to 10 mm, in the recharge pit, over the existing layer of boulders, in required thickness, for all leads & lifts, all complete as per...

Supplying, filling, spreading &leveling coarse sand of size range 1.5 mm to 2 mm in recharge pit, in required thickness over gravel layer, for all leads

& lifts, all complete as per direction of Engin...

Gravel packing in tube well construction in accordance with IS: 4097, including providing gravel fine/ medium/ coarse, in required grading & sizes as per actual requirement, all complete as per direct...

Providing and Filling in foundation with granite / trap broken metal 100mm. and down size & with approved sand including hand packing, ramming, watering, including cost of all materials and labour wit...

Providing and fixing Sewer (SWR) pipes, including all fittings, This includes jointing of pipes & fittings with one step solvent cement, trenching, refilling & testing of joints complete as per direct...

Construction work of a New Inspection Bungalow in Chintamani Assembly constituency of Chikkaballapur District(Consultancy)

Consultancy Fee for Civil Works in Public Works Department.construction drawings for Architectural, Structural & all Services (For Buildings &

Bridges) as per I.S Codes, ---- etc., complete with al...

Construction work of a New Inspection Bungalow in Chintamani Assembly constituency of Chikkaballapur District(WATER SUPPLY AND SANITARY WORKS - IB-GF)

Providing and fixing Unplasticised Polyvinyl Chloride (uPVC) pipes, for

cold water supply including all uPVC plain & brass threaded fittings

This includes jointing of pipes & fittings with one step uP...

Providing and fixing Unplasticised Polyvinyl Chloride (uPVC) pipes, for

cold water supply including all uPVC plain & brass threaded fittings

This includes jointing of pipes & fittings with one step uP...

Providing and fixing Sewer (SWR) pipes, including all fittings,This includes jointing of pipes & fittings with one step solvent cement, trenching, refilling & testing of joints complete as per directi...

Providing and fixing Sewer (SWR) pipes, including all fittings,This includes jointing of pipes & fittings with one step solvent cement, trenching, refilling & testing of joints complete as per directi...

Providing and fixing PVC (S.W.R) Multi Floor Trap 10.0 cm X 7.5 cm X 5.0

cm X 4.0 cm with all fitting arrangements & all necessary accessories

complete ---- including the cost and conveyance of all ma...

PVC pipe - OD 75mm and 6 Kg/sqcm - (Shaft Drainage) ---- including the cost and conveyance of all materials, Curing, cost of labour hire charges of equipment and machinery, all lead and lift, loading ...

PVC pipe - OD 110mm and 6 Kg/sqcm - (Shaft Drainage) ---- including the cost and conveyance of all materials, Curing, cost of labour hire charges of equipment and machinery, all lead and lift, loading...

Providing and fixing on wall face unplasticised Rigid PVC rain water

pipes conforming to IS : 13592 Type A, including jointing with seal ring

conforming to IS : 5382, leaving 10 mm gap for thermal exp...

Providing and fixing on wall face unplasticised Rigid PVC rain water

pipes conforming to IS : 13592 Type A, including jointing with seal ring

conforming to IS : 5382, leaving 10 mm gap for thermal exp...

Providing and fixing on wall face unplasticised Rigid PVC rain water

pipes conforming to IS : 13592 Type A, including jointing with seal ring

conforming to IS : 5382, leaving 10 mm gap for thermal exp...

Providing and fixing 600x450 mm beveled edge mirror of superior glass

(of approved quality) complete with 6 mm thick hard board ground fixed

to wooden cleats with C.P. brass screws and washers complet...

Providing and fixing C.P. brass angle valve for basin mixer and geyser

points of approved quality conforming to IS:8931 ---- including the cost and conveyance of all materials, Curing, cost of labour ...

Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet : 150 mm diameter ---- including the cost and conveyance of all materials, Curing, cost of labour hire charges of equipment and machi...

Providing and fixing CP Brass 15 mm nominal dia Single lever telephonic

wall mixer of quality & make as approved by Engineer in charge. ---- including the cost and conveyance of all materials, Curing...

Providing and fixing PTMT towel rail complete with brackets fixed to

wooden cleats with CP brass screws with concealed fittings arrangement

of approved quality and colour 600 mm long towel rail with...

Providing and fixing PTMT liquid soap container 109 mm wide, 125 mm

high and 112 mm distance from wall of standard shape with bracket of

the same materials with snap fittings of approved quality and...

Providing and fixing white vitreous china extended wall mounting water closet of size 780x370x690 mm of approved shape including providing & fixing white vitreous china cistern with dual flush fitting...

Providing and fixing white vitreous china flat back or wall corner type

lipped front urinal basin of 430x260x350 mm and 340x410x265 mm

sizes respectively with automatic flushing cistern with standard ...

Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the w...

Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making go...

Providing and fixing Single lever sink mixer with swivel spout top outlet wall mountable made of Stainless steel with all concealed fitting arrangements & all necessary accesories complete - Class Eco...

Providing and fixing Toilet paper holder made of Stainless steel with all

concealed fitting arrangements & all necessary accesories complete - Class:Premium ---- including the cost and conveyance of a...

Providing and fixing Soap dish wired with 200mm width made of Stainless

steel with all concealed fitting arrangements & all necessary accesories

complete - Class : Premium ---- including the cost and...

Providing and fixing Robe hook twin made of Stainless steel with all

concealed fitting arrangements & all necessary accesories complete - Class Premium ---- including the cost and conveyance of all ma...

Providing and fixing Towel rail 450mm length made of Stainless steel with

all concealed fitting arrangements & all necessary accesories complete

- Class Premium ---- including the cost and conveyance ...

Providing and fixing Stainless Steel Grab Bar 600 mm Long with all

concealed fitting arrangements & all necessary accesories complete - Class ---- including the cost and conveyance of all materials, C...

Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931. ---- including the cost and conveyance of all materials, Curing, cost of labour hir...

Providing and fixing brass bib cock of approved quality 15 mm nominal bore ---- including the cost and conveyance of all materials, Curing, cost of labour hire charges of equipment and machinery, all ...

Providing and fixing CP Brass 32mm size Bottle Trap of approved quality& make and as per the direction of Engineer-in-charge. ---- including the cost and conveyance of all materials, Curing, cost of l...

Providing and fixing unplasticised PVC connection pipe with brass unions :(30 cm length 15 mm nominal bore) ---- including the cost and conveyance of all materials, Curing, cost of labour hire charges...

Providing and fixing PTMT Bottle Trap for Wash basin and sink. Bottle trap 31mm single piece moulded with height of 270 mm, eTFective

length of tail pipe 260 mm from the centre of the waste coupling, ...

Providing and fixing PTMT Waste Coupling for wash basin and sink, of

approved quality and colour. Waste coupling 31 mm dia of 79 mm length and 62mm breadth weighing not less than 45 g ---- including t...

Providing and fixing PTMT extension nipple for water tank pipe, fittings

of approved quality and colour. 15 mm nominal bore, weighing not less than 32 g ---- including the cost and conveyance of all...

Providing and laying flooring and steps fine dressed granite stone slabs

40 mm thick on cement mortar bed 1:6, 25 mm thick, and pointed with

cement mortar 1:3 over existing cement concrete bed , inc...

Providing and fixing granite stone slab with table rubbed, edges rounded

and polished, of size 75x50 cm deep and 1.8 cm thick, fixed in urinal parti-

tions by cutting a chase of appropriate width with...

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,

having thermal stability for hot & cold water supply, including all CPVC

plain & brass threaded fittings, i/c fixing the pipe with cla...

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,

having thermal stability for hot & cold water supply, including all CPVC

plain & brass threaded fittings, i/c fixing the pipe with cla...

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,

having thermal stability for hot & cold water supply, including all CPVC

plain & brass threaded fittings, i/c fixing the pipe with cla...

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,

having thermal stability for hot & cold water supply, including all CPVC

plain & brass threaded fittings, i/c fixing the pipe with cla...

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,

having thermal stability for hot & cold water supply including all CPVC

plain & brass threaded fittings This includes jointing of pipe...

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,

having thermal stability for hot & cold water supply including all CPVC

plain & brass threaded fittings This includes jointing of pipe...

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,

having thermal stability for hot & cold water supply including all CPVC

plain & brass threaded fittings This includes jointing of pipe...

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,

having thermal stability for hot & cold water supply including all CPVC

plain & brass threaded fittings This includes jointing of pipe...

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,

having thermal stability for hot & cold water supply including all CPVC

plain & brass threaded fittings This includes jointing of pipe...

Providing and fixing ball valve (brass) of approved quality, High or low

pressure, with plastic floats complete : 20 mm nominal bore ---- including the cost and conveyance of all materials, Curing, co...

Providing and fixing ball valve (brass) of approved quality, High or low

pressure, with plastic floats complete : 25 mm nominal bore ---- including the cost and conveyance of all materials, Curing, co...

Providing and fixing Brass full way valve gate with C.I. wheel of

approved quality (screwed end) : 32 mm nominal bore ---- including the cost and conveyance of all materials, Curing, cost of labour hi...

Providing and fixing Brass full way valve gate with C.I. wheel of

approved quality (screwed end) : 40 mm nominal bore ---- including the cost and conveyance of all materials, Curing, cost of labour hi...

Providing and fixing Brass full way valve gate with C.I. wheel of

approved quality (screwed end) : 50 mm nominal bore ---- including the cost and conveyance of all materials, Curing, cost of labour hi...

Providing and fixing gun metal non- return valve of approved quality (screwed end) : 50 mm nominal bore Horizontal ---- including the cost and conveyance of all materials, Curing, cost of labour hire...

Supplying, installation, testing and commissioning of solar hot water

heater comprising of solar Flat Plate Collector (FPC) of size

2120x1040x100mm and stainless steel hot water storage tank with

Providing and placing on terrace (at all floor levels) polyethylene

water storage tank, IS : 12701 marked, with cover and suitable locking

arrangement and making necessary holes for inlet, outlet an...

Providing and fixing Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approv...

Providing and inserting nipples with approved fixing compound

after drilling holes for grouting as per Technical Specifications

including subsequent cutting/removal and sealing of the hole as

Providing and fixing PTMT grating of approved quality and colour: Rectangular type with openable circular lid ---- including the cost and conveyance of all materials, Curing, cost of labour hire charg...

Providing and fixing Bidet spray made of Stainless steel with all concealed

fitting arrangements & all necessary accesories complete - Class : Premium ---- including the cost and conveyance of all mat...

Construction work of a New Inspection Bungalow in Chintamani Assembly constituency of Chikkaballapur District(WATER SUPPLY AND SANITARY WORKS - IB-FF)

Providing and fixing Unplasticised Polyvinyl Chloride (uPVC) pipes, for

cold water supply including all uPVC plain & brass threaded fittings

This includes jointing of pipes & fittings with one step uP...

Providing and fixing Sewer (SWR) pipes, including all fittings, This

includes jointing of pipes & fittings with one step solvent cement,

trenching, refilling & testing of joints complete as per direct...

Providing and fixing Sewer (SWR) pipes, including all fittings, This

includes jointing of pipes & fittings with one step solvent cement,

trenching, refilling & testing of joints complete as per direct...

Providing and fixing PVC (S.W.R) Multi Floor Trap 10.0 cm X 7.5 cm X 5.0

cm X 4.0 cm with all fitting arrangements & all necessary accessories

complete ---- including the cost and conveyance of all ma...

Providing and fixing 600x450 mm beveled edge mirror of superior glass

(of approved quality) complete with 6 mm thick hard board ground fixed

to wooden cleats with C.P. brass screws and washers complet...

Providing and fixing C.P. brass angle valve for basin mixer and geyser

points of approved quality conforming to IS:8931 ---- including the cost and conveyance of all materials, Curing, cost of labour ...

Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet : 150 mm diameter ---- including the cost and conveyance of all materials, Curing, cost of labour hire charges of equipment and machi...

Providing and fixing CP Brass 15 mm nominal dia Single lever telephonic

wall mixer of quality & make as approved by Engineer in charge. ---- including the cost and conveyance of all materials, Curing...

Providing and fixing PTMT towel rail complete with brackets fixed to

wooden cleats with CP brass screws with concealed fittings arrangement

of approved quality and colour 600 mm long towel rail with...

Providing and fixing PTMT liquid soap container 109 mm wide, 125 mm

high and 112 mm distance from wall of standard shape with bracket of

the same materials with snap fittings of approved quality and...

Providing and fixing white vitreous china extended wall mounting water closet of size 780x370x690 mm of approved shape including providing & fixing white vitreous china cistern with dual flush fitting...

Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the w...

Providing and fixing Toilet paper holder made of Stainless steel with all

concealed fitting arrangements & all necessary accesories complete - Class:Premium ---- including the cost and conveyance of a...

Providing and fixing Soap dish wired with 200mm width made of Stainless

steel with all concealed fitting arrangements & all necessary accesories

complete - Class : Premium ---- including the cost and...

Providing and fixing Robe hook twin made of Stainless steel with all

concealed fitting arrangements & all necessary accesories complete - Class Premium ---- including the cost and conveyance of all ma...

Providing and fixing Towel rail 450mm length made of Stainless steel with

all concealed fitting arrangements & all necessary accesories complete

- Class Premium ---- including the cost and conveyance ...

Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931. ---- including the cost and conveyance of all materials, Curing, cost of labour hir...

Providing and fixing brass bib cock of approved quality 15 mm nominal bore ---- including the cost and conveyance of all materials, Curing, cost of labour hire charges of equipment and machinery, all ...

Providing and fixing CP Brass 32mm size Bottle Trap of approved quality& make and as per the direction of Engineer-in-charge. ---- including the cost and conveyance of all materials, Curing, cost of l...

Providing and fixing unplasticised PVC connection pipe with brass unions :(30 cm length 15 mm nominal bore) ---- including the cost and conveyance of all materials, Curing, cost of labour hire charges...

Providing and fixing PTMT Bottle Trap for Wash basin and sink. Bottle trap 31mm single piece moulded with height of 270 mm, eTFective

length of tail pipe 260 mm from the centre of the waste coupling, ...

Providing and fixing PTMT Waste Coupling for wash basin and sink, of

approved quality and colour. Waste coupling 31 mm dia of 79 mm length and 62mm breadth weighing not less than 45 g ---- including t...

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,

having thermal stability for hot & cold water supply, including all CPVC

plain & brass threaded fittings, i/c fixing the pipe with cla...

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,

having thermal stability for hot & cold water supply, including all CPVC

plain & brass threaded fittings, i/c fixing the pipe with cla...

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,

having thermal stability for hot & cold water supply, including all CPVC

plain & brass threaded fittings, i/c fixing the pipe with cla...

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,

having thermal stability for hot & cold water supply, including all CPVC

plain & brass threaded fittings, i/c fixing the pipe with cla...

Providing and inserting nipples with approved fixing compound

after drilling holes for grouting as per Technical Specifications

including subsequent cutting/removal and sealing of the hole as

Providing and fixing PTMT grating of approved quality and colour: Rectangular type with openable circular lid ---- including the cost and conveyance of all materials, Curing, cost of labour hire charg...

Providing and fixing Bidet spray made of Stainless steel with all concealed

fitting arrangements & all necessary accesories complete - Class : Premium ---- including the cost and conveyance of all mat...

Construction work of a New Inspection Bungalow in Chintamani Assembly constituency of Chikkaballapur District(WATER SUPPLY AND SANITARY WORKS - IB-SF)

Providing and fixing Unplasticised Polyvinyl Chloride (uPVC) pipes, for

cold water supply including all uPVC plain & brass threaded fittings

This includes jointing of pipes & fittings with one step uP...

Providing and fixing Sewer (SWR) pipes, including all fittings, This

includes jointing of pipes & fittings with one step solvent cement,

trenching, refilling & testing of joints complete as per direct...

Providing and fixing Sewer (SWR) pipes, including all fittings, This

includes jointing of pipes & fittings with one step solvent cement,

trenching, refilling & testing of joints complete as per direct...

Providing and fixing PVC (S.W.R) Multi Floor Trap 10.0 cm X 7.5 cm X 5.0

cm X 4.0 cm with all fitting arrangements & all necessary accessories

complete ---- including the cost and conveyance of all ma...

Providing and fixing 600x450 mm beveled edge mirror of superior glass

(of approved quality) complete with 6 mm thick hard board ground fixed

to wooden cleats with C.P. brass screws and washers complet...

Providing and fixing C.P. brass angle valve for basin mixer and geyser

points of approved quality conforming to IS:8931 ---- including the cost and conveyance of all materials, Curing, cost of labour ...

Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet : 150 mm diameter ---- including the cost and conveyance of all materials, Curing, cost of labour hire charges of equipment and machi...

Providing and fixing CP Brass 15 mm nominal dia Single lever telephonic

wall mixer of quality & make as approved by Engineer in charge. ---- including the cost and conveyance of all materials, Curing...

Providing and fixing PTMT towel rail complete with brackets fixed to

wooden cleats with CP brass screws with concealed fittings arrangement

of approved quality and colour 600 mm long towel rail with...

Providing and fixing PTMT liquid soap container 109 mm wide, 125 mm

high and 112 mm distance from wall of standard shape with bracket of

the same materials with snap fittings of approved quality and...

Providing and fixing white vitreous china extended wall mounting water closet of size 780x370x690 mm of approved shape including providing & fixing white vitreous china cistern with dual flush fitting...

Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the w...

Providing and fixing Toilet paper holder made of Stainless steel with all

concealed fitting arrangements & all necessary accesories complete - Class:Premium ---- including the cost and conveyance of a...

Providing and fixing Soap dish wired with 200mm width made of Stainless

steel with all concealed fitting arrangements & all necessary accesories

complete - Class : Premium ---- including the cost and...

Providing and fixing Robe hook twin made of Stainless steel with all

concealed fitting arrangements & all necessary accesories complete - Class Premium ---- including the cost and conveyance of all ma...

Providing and fixing Towel rail 450mm length made of Stainless steel with

all concealed fitting arrangements & all necessary accesories complete

- Class Premium ---- including the cost and conveyance ...

Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931. ---- including the cost and conveyance of all materials, Curing, cost of labour hir...

Providing and fixing brass bib cock of approved quality 15 mm nominal bore ---- including the cost and conveyance of all materials, Curing, cost of labour hire charges of equipment and machinery, all ...

Providing and fixing CP Brass 32mm size Bottle Trap of approved quality& make and as per the direction of Engineer-in-charge. ---- including the cost and conveyance of all materials, Curing, cost of l...

Providing and fixing unplasticised PVC connection pipe with brass unions :(30 cm length 15 mm nominal bore) ---- including the cost and conveyance of all materials, Curing, cost of labour hire charges...

Providing and fixing PTMT Bottle Trap for Wash basin and sink. Bottle trap 31mm single piece moulded with height of 270 mm, eTFective

length of tail pipe 260 mm from the centre of the waste coupling, ...

Providing and fixing PTMT Waste Coupling for wash basin and sink, of

approved quality and colour. Waste coupling 31 mm dia of 79 mm length and 62mm breadth weighing not less than 45 g ---- including t...

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,

having thermal stability for hot & cold water supply, including all CPVC

plain & brass threaded fittings, i/c fixing the pipe with cla...

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,

having thermal stability for hot & cold water supply, including all CPVC

plain & brass threaded fittings, i/c fixing the pipe with cla...

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,

having thermal stability for hot & cold water supply, including all CPVC

plain & brass threaded fittings, i/c fixing the pipe with cla...

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,

having thermal stability for hot & cold water supply, including all CPVC

plain & brass threaded fittings, i/c fixing the pipe with cla...

Providing and inserting nipples with approved fixing compound

after drilling holes for grouting as per Technical Specifications

including subsequent cutting/removal and sealing of the hole as

Providing and fixing PTMT grating of approved quality and colour: Rectangular type with openable circular lid ---- including the cost and conveyance of all materials, Curing, cost of labour hire charg...

Providing and fixing Bidet spray made of Stainless steel with all concealed

fitting arrangements & all necessary accesories complete - Class : Premium ---- including the cost and conveyance of all mat...

Construction work of a New Inspection Bungalow in Chintamani Assembly constituency of Chikkaballapur District(WATER SUPPLY AND SANITARY WORKS-EXTERNAL)

Earth work excavation by manual means for drains,canals, waste weir,

draft, approach channels, key trenches, foundation of bridges and

such simillar works in all kinds of soils , as per drawing and ...

Filling approved earth (excluding rock) in trenches, plinth, sides of

foundations and other similar works etc. in layers not exceeding 20cm

in depth, consolidating each deposited layer by ramming and ...

Providing UPVC FOAM CORE pipes conforming to IS 16098 P-1 2013

with latest amendments ended with integral sockets with ISI mark and

conveying to worksite, rolling and lowering into trenches, laying ...

Constructing brick masonry chamber of internal dimension 600x600mm

and depth of 600mm (inner dimensions) with modular bricks of CD 75

in cement mortar 1:6, bed concrete 150mm thick with 1:3:6, plast...

Providing and fixing square-mouth S.W. gully trap class SP-1 complete

with C.I. grating brick masonry chamber 150 x 100 mm size P type With

Non Modular common burnt clay bricks of designation 3.5 & wi...

Construction of RCC Machinehole chambers of 1:1.5:3 proportion

or approved type Cast-insitu / Pre-cast RCC Machinehole chambers,

constructed using form vibrators of standard type, with barricading, ...

Construction of RCC Machinehole chambers of 1:1.5:3 proportion

or approved type Cast-insitu / Pre-cast RCC Machinehole chambers,

constructed using form vibrators of standard type, with barricading, ...

Providing and fixing PTMT Ball cock of approved quality, colour and make complete with Epoxy coated aluminium rod with L.P./ H.P.H.D. plastic ball. (50 mm nominal bore, 242mm long, weighing not less t...

Providing and fixing DI/CI puddle flanges conforming to IS 7181-1986

with latest ammendments., in position for RCC walls including hoisting

and conveying them to work spot with all lead and lifts et...

Providing and fixing DI/CI puddle flanges conforming to IS 7181-1986

with latest ammendments., in position for RCC walls including hoisting

and conveying them to work spot with all lead and lifts et...

Providing and fixing DI/CI puddle flanges conforming to IS 7181-1986

with latest ammendments., in position for RCC walls including hoisting

and conveying them to work spot with all lead and lifts et...

Providing and fixing DI/CI puddle flanges conforming to IS 7181-1986

with latest ammendments., in position for RCC walls including hoisting

and conveying them to work spot with all lead and lifts et...

Providing and fixing DI/CI puddle flanges conforming to IS 7181-1986

with latest ammendments., in position for RCC walls including hoisting

and conveying them to work spot with all lead and lifts et...

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,

having thermal stability for hot & cold water supply including all CPVC

plain & brass threaded fittings This includes jointing of pipe...

Construction work of a New Inspection Bungalow in Chintamani Assembly constituency of Chikkaballapur District(PUMPS-SR)

Supply and delivery of Centrifugal pumpset at site brand new best make and with discharge duty confirming to ISI standards and its latest amendments. SUMP TO DWS OHT 5 HP, size 80x65 Head 23.50M, Disc...

Labour charges for Erection, Electrification and commissioning of Pump sets, including aligning and balancing of all items including supply and erection of two pair of supporting clamps, bore well cap...

Construction work of a New Inspection Bungalow in Chintamani Assembly constituency of Chikkaballapur District(softner)

Supplying of water softner with necessary accessories complete with internal piping, suitable supports for mounting pressure gauges & automatic type multiport valve , etc. the softner shall be made o...

Construction work of a New Inspection Bungalow in Chintamani Assembly constituency of Chikkaballapur District(INTERNAL ELECTRICAL WORKS)

Point wiring using Copper wire without switch. Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wi...

Point wiring using Copper wire without switch. Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wi...

Point wiring using Copper wire without switch. Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wi...

Point wiring using Copper wire without switch. Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wi...

Point wiring using Copper wire without switch. Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wi...

Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 1...

Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 3...

Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 4...

Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 6...

Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 8...

Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 1...

Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing m...

Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing m...

Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing m...

Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing m...

Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing m...

Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing m...

Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6Amps one way Switch ---- including the cost and conveyance of all materials...

Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6Amps Two way Switch ---- including the cost and conveyance of all materials...

Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6Amps 3way socket ---- including the cost and conveyance of all materials, C...

Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. Stepped Fan Regulator. ---- including the cost and conveyance of all materia...

Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 32Amps DP switch ---- including the cost and conveyance of all materials, Cu...

Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6/16Amps universal socket ---- including the cost and conveyance of all mate...

Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 16Amps one way switch ---- including the cost and conveyance of all material...

Supplyin and Fixing Metal Fan Box with Round Hook. ---- including the cost and conveyance of all materials, Curing, cost of labour hire charges of equipment and machinery, all lead and lift, loading a...

TV/Telephone socket ---- including the cost and conveyance of all materials, Curing, cost of labour hire charges of equipment and machinery, all lead and lift, loading and unloading charges, transport...

RJ45/ I.O. outlet Cat 6 ---- including the cost and conveyance of all materials, Curing, cost of labour hire charges of equipment and machinery, all lead and lift, loading and unloading charges, trans...

Supplying heavy gauge PVC conduit pipe …….dia ...... mm thick confirming to IS 2509 with suitable size bends, metal/PVC junction boxes adhesive paste etc., and running before concreting the slab....

Supplying heavy gauge PVC conduit pipe …….dia ...... mm thick confirming to IS 2509 with suitable size bends, metal/PVC junction boxes adhesive paste etc., and running before concreting the slab....

Supplying heavy gauge PVC conduit pipe …….dia ...... mm thick confirming to IS 2509 with suitable size bends, metal/PVC junction boxes adhesive paste etc., and running before concreting the slab....

Supplying heavy gauge PVC conduit pipe …….dia ...... mm thick confirming to IS 2509 with suitable size bends, metal/PVC junction boxes adhesive paste etc., by groove cutting in wall and fixing by...

Supplying heavy gauge PVC conduit pipe …….dia ...... mm thick confirming to IS 2509 with suitable size bends, metal/PVC junction boxes adhesive paste etc., by groove cutting in wall and fixing by...

Supplying heavy gauge PVC conduit pipe …….dia ...... mm thick confirming to IS 2509 with suitable size bends, metal/PVC junction boxes adhesive paste etc., by groove cutting in wall and fixing by...

Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS...

Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS...

Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS...

Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS...

Supplying and fixing regular MCB distribution boards on wall/ wood board I flush mounting using required clamps,i bolts, nuts etc., with provision for fixing suitable type capacity MCB's s...

Supplying and fixing regular MCB distribution boards on wall/ wood board I flush mounting using required clamps,i bolts, nuts etc., with provision for fixing suitable type capacity MCB's s...

Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short ci...

Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short ci...

Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short ci...

Supplying, fixing and wiring Earth Leakage Miniature Circuit Breaker [ELMCB] 240/450V up to 300mA sensitivity on existing wood/panel board 16-25 Amps 2 pole ---- including the cost and conveyanc...

Supplying, fixing and wiring Residual current Circuit Breaker [RCCB] 240/450V up to 300mA sensitivity on existing wood/panel board 32-40 Amps 4 pole ---- including the cost and conveyance of all ...

1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part 1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3975 4 core 1...

1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part 1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3975 3.5 core...

1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part 1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3975 3.5 core...

Laying of cable in Existing Trench/GI pipe/Stone Ware/RCC Hume pipe using Wooden/Aluminum Rollers as directed by the departmental staff 2.5 sqmm to 25 sqmm ---- including the cost and conveyance of al...

Laying of cable in Existing Trench/GI pipe/Stone Ware/RCC Hume pipe using Wooden/Aluminum Rollers as directed by the departmental staff 35 sqmm to 95 sqmm ---- including the cost and conveyance of all...

Supplying and fiixing of heavy duty cable glands suitable for UG cable of 1.1 KV class (metal only) 25mm dia ---- including the cost and conveyance of all materials, Curing, cost of labour hire charge...

Supplying and fiixing of heavy duty cable glands suitable for UG cable of 1.1 KV class (metal only) 32mm dia ---- including the cost and conveyance of all materials, Curing, cost of labour hire charge...

Supplying tinned copper lugs and crimping and wiring to terminal point for wire of the following sizes. 25 sqmm Long Barrel ---- including the cost and conveyance of all materials, Curing, cost of lab...

Supplying tinned copper lugs and crimping and wiring to terminal point for wire of the following sizes. 35 sqmm Long Barrel ---- including the cost and conveyance of all materials, Curing, cost of l...

Supplying tinned copper lugs and crimping and wiring to terminal point for wire of the following sizes. 50 sqmm Long Barrel ---- including the cost and conveyance of all materials, Curing, cost of l...

Supplying and drawing PVC flexible 2 pair telepone unarmoured tinned copper cable. ---- including the cost and conveyance of all materials, Curing, cost of labour hire charges of equipment and machin...

Supplying and drawing PVC insulated gas injected physical foam jelly flooded co-axial TV cable.RG-6. ---- including the cost and conveyance of all materials, Curing, cost of labour hire charges of equ...

Supplying and drawing UTP-CAT 6E LAN cable ---- including the cost and conveyance of all materials, Curing, cost of labour hire charges of equipment and machinery, all lead and lift, loading and unlo...

Supplying, fixing, wiring, earth electrode for grounding conduits, I.C.

cutouts and other equipment's on the meter board using 40 mm dia

2.90 mm thick GI pipe 2.5m long buried in a pit . The pit shoul...

Supplying and running of GI/Copper strips for grounding connections, using necessary fixing materials as required. 25x3mm GI strip ---- including the cost and conveyance of all materials, Curing, cost...

Supplying and running of GI/Copper strips for grounding connections, using necessary fixing materials as required. 25x3mm Copper strip ---- including the cost and conveyance of all materials, Curing, ...

Supplying and running of GI/Copper strips for grounding connections, using necessary fixing materials as required. 600 X 600 X 3 mm GI plate. ---- including the cost and conveyance of all materials, C...

Supplying of ......feet - PVC Batten with integrated LED tube .....W with high quality diffuser with Life of 25000 burning hours & 70% lumen maintenance with CRI 80. Power Input: 220-240V @ 50/60Hz & ...

Supply of round/square recess/surface mounted rolling type LED Down light with .......W GU 10 LED Lamp Rib Fabricated from Die cast aluminium with white powder coated prewired to mains connector & has...

Supply of round/square recess/surface mounted rolling type LED Down light with .......W GU 10 LED Lamp Rib Fabricated from Die cast aluminium with white powder coated prewired to mains connector & has...

Supplying of recess mounting non integral type ........LED ...... W luminaire comprising of pressure decast/extruded aluminium housing, with spring loaded fase ceiling clamps, Power LEDs with CCT 6500...

Supplying & fixing of retrofit type - LED bulb.......W with OPAL acrylic diffuser comprising of LED source with CCT 6500 degree K, CRI 70%. efficacy 80 lumen per watt, life 25000 burning hours and Com...

Supplying & fixing of retrofit type - LED bulb.......W with OPAL acrylic diffuser comprising of LED source with CCT 6500 degree K, CRI70%. efficacy 80 lumen per watt, life25000 burning hours and Compl...

Supplying & fixing of retrofit type - LED bulb.......W with OPAL acrylic diffuser comprising of LED source with CCT 6500 degree K, CRI70%. efficacy 80 lumen per watt, life 25000 burning hours and Comp...

Supplying and fixing of LED Bulkhead of 10W with IP65 protection and IK 08 impact resistance suitable for surface and wall mounting applications. ---- including the cost and conveyance of all material...

Supplying & Fixing of Special Type pigmy and candle lamp.

Operating voltage range from 180V to 265V, 50Hz AC power Supply ---- including the cost and conveyance of all materials, Curing, cost of labou...

Supplying & Fixing of 70-150 Watts lamp holder 2 Pin ---- including the cost and conveyance of all materials, Curing, cost of labour hire charges of equipment and machinery, all lead and lift, loading...

Supplying exhaust fan of 1440 RPM of 300mm (12") size with bracket blades complete for light duty suitable to operate on 230V 50Hz, AC Supply. ---- including the cost and conveyance of all materials, ...

Supplying of Ceiling Fan with Capacitor rating As per guideline of BEE 5 star rating and IS:374/19 and also comply with IS: 1709/1984 with latest amendment, Rated voltage 220 V/50 Hz, Rated ...

Supplying wall mounting fan suitable to operate at singlephase 230v A.C. supply. 300mm Sweep ---- including the cost and conveyance of all materials, Curing, cost of labour hire charges of equipment a...

Supply of LED Streetlight luminaire with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of anti glare clear diffuser with Injection moulded polyc...

Fixing all types and all capacities of fluorescent / false ceiling / spot light / CFL / LED fittings indoor on the wall / ceiling / rafters / girders using 23/0.0076” twin twisted PVC insulated wire...

Fixing a ceiling / wall mounting fan of all capacities and all types, with necessary clamps and 'S' hook made out of 15mm dia MS rod, with 5 amps. ceiling rose of approved quality with necessary lengt...

Fixing one exhaust fan after making a suitable nitch in the wall and finishing with cement mortar and colouring to match the existing wall or brackets, with bolts and nuts and a 5 amps, ceiling rose w...

Supplying and fixing telescopic M.S. bracket fabricated by using 0.5m length 4” dia telescopic M. S. pipe, with 2” dia 1.5m long M. S. bracket and are welded with suitable angle, using 6mm thick M...

Fixing halogen/metal halide / SVL / IL / LED floodlight fitting over existing pole / wall ceiling including clamps, bolts, nuts and wiring using suitable capacity wires. ---- including the cost and co...

Fabricating supplying and mounting MS box made out ...SWG suitable for floor I wall mounting, fully weather proof with provision for better heat dissipation, provided with hinged front cover,...

Supplying .........amps rated 3phase with neutral bus bar using required capacity electrolytic aluminum strips covered with heat shrinkable coloured PVC sleeve, mounted on phenoliciFRP/DMC i...

Supplying and fixing angle iron frame work iabricated out of M.S. angle iron.. and M.S. flat ... with bolts, washers etc.,and painted with 2 coats of red oxide and then two coats of approved pai...

Supplying and fixing angle iron frame work iabricated out of M.S. angle iron.. and M.S. flat ... with bolts, washers etc.,and painted with 2 coats of red oxide and then two coats of approved pai...

Supplying and fixing Moulded Case Circuit Breaker (MCCB) over the existing wood/panel board using necessary screws, bolts, nuts, necessary phase separators, handle...

Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short ci...

Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short ci...

Supplying of multi function digital meter with three line back light LCD type display for voltage, Current, frequency, Power, power factor, KVA, KWH,KVAR suitable for 3 phase, 4 wire LT netwo...

Supplying and fixing of LED type panel board indicating lamp with required colour suitable for 220v A.C. 50 Hz 12/24v D.C ---- including the cost and conveyance of all materials, Curing, cost of labou...

Supplying, fixing and wiring 50/5 to 400/5Amps 5VA burden Current Transformer. Class 0.5 accuracy with Tape Wound ---- including the cost and conveyance of all materials, Curing, cost of labour hir...

Supply and fixing of fully Enclosed 125A Automatic Transfer Switch (ATS) Pre-wired with Flexible Settings and seamless transfer between two power sources. The enclosure made of MS Power coated of nece...

Supplying, fixing and wiring Automatic Power Factor controller fully, static units controlled by 14 stage microprocessor operation, relays LED display, self programming function for power ...

Supplying, fixing and wiring heavy duty low voltage capacitors conforming to IS 2834. 3 phase, 400/440 volts grade, for power factor improvement of rotating machinery ---- including the cost and conv...

Supply and fixing of 4pole power contactor with NO/NC contacts on existing wood/panel board using necessary bolts, nuts, washers and wiring etc., complete with AC-3 Rating and as per IS-13947. 25 Amps...

Supplying of…TR split Air conditioners suitable for operation on A/C supply single phase 50 Hz 230 Volts with hermetically sealed compressor with air cooled condenser, motor capacitor and start run ...

Supplying, erecting, testing and commissioning of voltage stabilizer suitable for 170 to 270 v in put and load variation from no load to full load, with over load protection, spike suppression, operat...

Installation charges for split type air conditioner with allied works for one indoor and one outdoor unit is to be mounted on suitable Angle Iron support up to 3.0 ton split/cassette type A/C. --...

Supplying ...litres capacity vertical/horizontal type wall mounting Electrical water heater with 22 SWG copper/SS sheet metal inner Container tinned inside Fiber body outside, filled with glass wool b...

Construction work of a New Inspection Bungalow in Chintamani Assembly constituency of Chikkaballapur District(EXTERNAL ELECTRICAL WORKS)

Supply RCC Pole - 9 Mtr Long, 145 Kg WL as per IS- 785 ---- including the cost and conveyance of all materials, Curing, cost of labour hire charges of equipment and machinery, all lead and lift, loadi...

Erection of RCC Pole - 9 Mtr Long, 145 Kg WL as per IS- 785 ---- including the cost and conveyance of all materials, Curing, cost of labour hire charges of equipment and machinery, all lead and lift, ...

Supply of 11 kV, 45 KN Polymeric Insulator ---- including the cost and conveyance of all materials, Curing, cost of labour hire charges of equipment and machinery, all lead and lift, loading and unlo...

Erection of 11 kV, 45 KN Polymeric Insulator ---- including the cost and conveyance of all materials, Curing, cost of labour hire charges of equipment and machinery, all lead and lift, loading and un...

Supply of Spiral Earth Electrode ---- including the cost and conveyance of all materials, Curing, cost of labour hire charges of equipment and machinery, all lead and lift, loading and unloading char...

Erection of Spiral Earth Electrode ---- including the cost and conveyance of all materials, Curing, cost of labour hire charges of equipment and machinery, all lead and lift, loading and unloading ch...

Supply and fixing of Caution/Danger Board ---- including the cost and conveyance of all materials, Curing, cost of labour hire charges of equipment and machinery, all lead and lift, loading and unload...

Supply of Anti Climbing Device (12 Mtr GI Barbed Wire ---- including the cost and conveyance of all materials, Curing, cost of labour hire charges of equipment and machinery, all lead and lift, loadin...

Erection of Anti Climbing Device (12 Mtr GI Barbed Wire ---- including the cost and conveyance of all materials, Curing, cost of labour hire charges of equipment and machinery, all lead and lift, load...

Supply and fixing of 11 kV, 400 Amps Double Break GOS ---- including the cost and conveyance of all materials, Curing, cost of labour hire charges of equipment and machinery, all lead and lift, loadin...

Supply and fixing of H-Frame for mounting GOS ---- including the cost and conveyance of all materials, Curing, cost of labour hire charges of equipment and machinery, all lead and lift, loading and un...

Supply of DOLO Cut Out ---- including the cost and conveyance of all materials, Curing, cost of labour hire charges of equipment and machinery, all lead and lift, loading and unloading charges, transp...

Erection of DOLO Cut Out ---- including the cost and conveyance of all materials, Curing, cost of labour hire charges of equipment and machinery, all lead and lift, loading and unloading charges, tran...

Supply RCC Pole - 9 Mtr Long, 145 Kg WL as per IS- 785 ---- including the cost and conveyance of all materials, Curing, cost of labour hire charges of equipment and machinery, all lead and lift, loadi...

Erection of RCC Pole - 9 Mtr Long, 145 Kg WL as per IS- 785 ---- including the cost and conveyance of all materials, Curing, cost of labour hire charges of equipment and machinery, all lead and lift, ...

Supply of 11 kV, Horizontal Cross Arm with clamps, HTST

supports, bolts, nuts and washers for RCC Pole - 9 Mtr

Long, 145 Kg WL ---- including the cost and conveyance of all materials, Curing, cost ...

Erection of 11 kV, Horizontal Cross Arm with clamps, HTST

supports, bolts, nuts and washers for RCC Pole - 9 Mtr

Long, 145 Kg WL ---- including the cost and conveyance of all materials, Curing, cost...

Supply and fixing of 11 kV, 5 KN Polymeric Pin Insulator (24 mm Dia FRP

Rod) ---- including the cost and conveyance of all materials, Curing, cost of labour hire charges of equipment and machinery, a...

Supply and fixing of 11 kV, 45 KN Polymeric Insulator ---- including the cost and conveyance of all materials, Curing, cost of labour hire charges of equipment and machinery, all lead and lift, loadi...

Erection of 11 kV, 45 KN Polymeric Insulator ---- including the cost and conveyance of all materials, Curing, cost of labour hire charges of equipment and machinery, all lead and lift, loading and un...

Supply and fixing of 15 Strain Insulator ---- including the cost and conveyance of all materials, Curing, cost of labour hire charges of equipment and machinery, all lead and lift, loading and unload...

Supply of Rabbit ACSR Conductor ---- including the cost and conveyance of all materials, Curing, cost of labour hire charges of equipment and machinery, all lead and lift, loading and unloading charg...

Erection of Rabbit ACSR Conductor ---- including the cost and conveyance of all materials, Curing, cost of labour hire charges of equipment and machinery, all lead and lift, loading and unloading cha...

Supply and fixing of PG Clamps for Rabbit Conductor ---- including the cost and conveyance of all materials, Curing, cost of labour hire charges of equipment and machinery, all lead and lift, loading...

Supply of Spiral Earth Electrode ---- including the cost and conveyance of all materials, Curing, cost of labour hire charges of equipment and machinery, all lead and lift, loading and unloading char...

Erection of Spiral Earth Electrode ---- including the cost and conveyance of all materials, Curing, cost of labour hire charges of equipment and machinery, all lead and lift, loading and unloading ch...

Supply and fixing of Caution/Danger Board ---- including the cost and conveyance of all materials, Curing, cost of labour hire charges of equipment and machinery, all lead and lift, loading and unload...

Supply of Anti Climbing Device (12 Mtr GI Barbed Wire ---- including the cost and conveyance of all materials, Curing, cost of labour hire charges of equipment and machinery, all lead and lift, loadin...

Erection of Anti Climbing Device (12 Mtr GI Barbed Wire ---- including the cost and conveyance of all materials, Curing, cost of labour hire charges of equipment and machinery, all lead and lift, load...

LT Metering Cubicle at Low Tension for 50KW to 150KW having specification and design as per the prototype approval (Excluding Meter cost and modem cost) ---- including the cost and conveyance of all m...

CT PT Operated ETV Meter 0.2s Accuracy class with ABT feature and DLMS protocal with ToD with RS232 Port UNIDIRACTIONAL ( Used for HT Installation, LT Metering Cubicle (50-150KW) ---- including the co...

GSM modem with connecting cable for remote communicating capabilities. ---- including the cost and conveyance of all materials, Curing, cost of labour hire charges of equipment and machinery, all lead...

Supply, erection, testing and commissioning of 63 KVA 5Star rated Aluminium wound Distribution Transformer 11KV/433V with Off Load Tap Switch, Buchholtz relay winding temperature indicator, oil temper...

Supplying, fixing, wiring, earth electrode for grounding conduits, I.C.

cutouts and other equipment's on the meter board using 40 mm dia

2.90 mm thick GI pipe 2.5m long buried in a pit . The pit shoul...

Supplying and running of GI/Copper strips for grounding connections, using necessary fixing materials as required. 25x6mm GI strip ---- including the cost and conveyance of all materials, Curing, cos...

Supplying and running of GI/Copper strips for grounding connections, using necessary fixing materials as required. 40x6mm Copper strip ---- including the cost and conveyance of all materials, Curing,...

Supplying and running of GI/Copper strips for grounding connections, using necessary fixing materials as required. 600x600x3mm Copper plate ---- including the cost and conveyance of all materials, Cu...

Supply & Making of 11KV (E) Extruded "X" linked for tubing & moulded & cross-linked components using Heat Shrink Stress Control tube having High Permittivity XLPE Terminations - INDOOR & OUTDOOR...

Supply & Making of 11KV (E) Extruded "X" linked for tubing & moulded & cross-linked components using Heat Shrink Stress Control tube having High Permittivity XLPE Terminations - INDOOR & OUTDOOR...

11 kV, 3 Core, XPLE HTUG Cable with pressure extruded inner sheeth, ROUND

WIRE ARMOURED as per IS-7098 (Part-2) Armouring wires dia and Resistivity as per IS-3975. 95 Sqmm, (54 GI Wires - 2.5 mm Dia)...

Providing chain link fencing 50X 50 mm size of 10 guage properly stretched between

rectangular Poles and fixed with suitable bolts & nuts, the free ends shall be

welded to the Pole and block pipe at t...

Fabricating supplying and mounting MS box made out ...SWG suitable for floor I wall mounting, fully weather proof with provision for better heat dissipation, provided with hinged front cover,...

Supplying .........amps rated 3phase with neutral bus bar using required capacity electrolytic aluminum strips covered with heat shrinkable coloured PVC sleeve, mounted on phenoliciFRP/DMC i...

Supplying and fixing angle iron frame work iabricated out of M.S. angle iron.. and M.S. flat ... with bolts, washers etc.,and painted with 2 coats of red oxide and then two coats of approved pai...

Supplying and fixing angle iron frame work iabricated out of M.S. angle iron.. and M.S. flat ... with bolts, washers etc.,and painted with 2 coats of red oxide and then two coats of approved pai...

Supplying and fixing Moulded Case Circuit Breaker (MCCB) over the existing wood/panel board using necessary screws, bolts, nuts, necessary phase separators, handle...

Supplying and fixing of LED type panel board indicating lamp with required colour suitable for 220v A.C. 50 Hz 12/24v D.C ---- including the cost and conveyance of all materials, Curing, cost of labou...

Construction work of a New Inspection Bungalow in Chintamani Assembly constituency of Chikkaballapur District(D G SETS)

Supplying, installing, testing and commissioning of 25KVA/20kw Diesel Generator set(CPCB-4) with following specifications. Power rating as per standard reference condition as per-BS 5514 / ISO 3046 / ...

Supply, Erection, testing and commissioning of AMF panel suitable for .KVA DG set. The panel is of cubical type base/floor mounting control panel with hinged doors, undrilled bottom gland plate, alumi...

Construction work of a New Inspection Bungalow in Chintamani Assembly constituency of Chikkaballapur District(L I F T S )

Design, supplying, erecting testing and commissioning of - 8Passenger lift(3 stops/3 Opening) with speed of 1mtr per second, variable voltage variable frequency drive, with or without machine room for...

Construction work of a New Inspection Bungalow in Chintamani Assembly constituency of Chikkaballapur District(C C T V )

Supply Installation testing and fixing of 5MP IR Dome Camera (6.0mm Lens with Aperture of F1.6 (By Default) / F2.0 (On demand)) 1/2.8” SONY - CMOS (STARVIS

Series) 5MP, 0Lux with IR LED ON ...

Supply Installation testing and fixing of 5MP IR BulletCamera (6.0mm Lens with Aperture of F1.6 (By Default) / F2.0 (On demand)) 1/2.8 SONY - CMOS (STARVIS

Series) SMP, 0Lux with IR ...

Supply Installation testing and fixing of SMP Pan-Tilt- Zoom Camera with 42x Optical Zoom SMP IR Dome PTZ with 42X Zoom 1/ 2.8CMOS Sensor 5 MP,

0.005 IuxF1.2,BW 0 lux with ...

Supply Installation testing and "fix"ing" of 64Channel NVR with 8SATA Port 64 Channel NVR with 4K Support and 8 HDD Slots 64 IP Channel Inputs; 4K HDMI, 1/1 Audio I/O and 2/1 Alarm...

Supply Installation testing and fixing of SEAGATE-AV- HARD DISK - 8 TB Height (mm/in)3 26.1mm/1.028in Width (mm/in, max)3 101.85mm/4.010in,Depth (mm/in, max)3 147.0mm/5....

Supply, installation, testing and commissioning of 24 Port PoE GIGABIT SWITCH With with 4 Gigabit SFP Ports,4 uplink ports, supporting 1GB connectivity on every port D-link inc...

Supply and Installation of 43"LED Monitor The rate shall include all mounting accessories complete as required ---- including the cost and conveyance of all materials, Curing, cost of labour hire char...

Supplying & Fixing of 2 ms Cat 6 Patch Cable ---- including the cost and conveyance of all materials, Curing, cost of labour hire charges of equipment and machinery, all lead and lift, loading and unl...

Supplying and drawing UTP-CAT 6E LAN cable ---- including the cost and conveyance of all materials, Curing, cost of labour hire charges of equipment and machinery, all lead and lift, loading and unlo...

Supplying heavy gauge PVC Consealed conduit pipe …….dia ...... mm thick confirming to IS 2509 with suitable size bends, metal/PVC junction boxes adhesive paste etc., and running before concreting...

Supplying & Fixing of Patch panel for LAN cabling .24 Port 10/100 patch panel ---- including the cost and conveyance of all materials, Curing, cost of labour hire charges of equipment and machin...

Supplying & Fixing of switch mounting rack with power manager & Cable manager 9U with 450mm depth ---- including the cost and conveyance of all materials, Curing, cost of labour hire charges of e...