Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹21.5 LAccepted-AOC 2349 BEDI NAGAR NAGPUR ROAD JABALPUR MP 282001 | AGRA | UTTAR PRADESH | 282001 | L1 | Accepted-AOC BEING LOWEST BIDDER | |
| 2 | L2₹22.6 L+₹35,596 (1.60%)Rejected-Finance HOUSE NO 25 CANTT BOARD WARD SADAR BAZAR CANTT JABALPUR MP 482001 | JABALPUR | MADHYA PRADESH | 482001 | L2 | Rejected-Finance OTHER THAN LOWEST BIDDER | |
| 3 | L3₹23.2 L+₹98,822 (4.45%)Rejected-Finance | L3 | Rejected-Finance OTHER THAN LOWEST BIDDER | |
| 4 | L4₹23.3 L+₹1.1 L (5.06%)Rejected-Finance 1409 512 PREM NAGAR MADAN MAHAL JABALPUR M P | JABALPUR | MADHYA PRADESH | 482002 | L4 | Rejected-Finance OTHER THAN LOWEST BIDDER | |
| 5 | L5₹23.6 L+₹1.4 L (6.45%)Rejected-Finance H NO 113 APR COLONY KATANGA CANTT JABALPUR M P PIN 482001 | JABALPUR | MADHYA PRADESH | 482001 | L5 | Rejected-Finance OTHER THAN LOWEST BIDDER |
Tender Value
₹26 L
EMD Value
₹52,000
Closing Date
30 Apr 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
CWE JABALPUR
HQ CWE JABALPUR OPPOSITE SUPPLY DEPOT SADAR JABALPUR 482001
SPL REPAIR OR MD ACCN BLOCK NO P-450 OF ROBERT BK HQ MB AREA UNDER GE (W) JABALPUR
2024_MES_649160_1
81036/E8
Open Tender
Civil Works
Item Rate
180 days
JABALPUR
AS PER NIT
7 documents required · 7 mandatory
₹500
Yes
GE WEST JABALPUR
₹52,000
Yes
CWE JABALPUR
23 Jul 2024
4 Apr 2024
2 May 2024
4 Apr 2024
30 Apr 2024
18 Apr 2024
4 Apr 2024 - 17 Apr 2024
17 Apr 2024
Amount
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) including removal of debris to out side MD land complete all as specified & directed.
Taking down cement plaster etc on brick walls/ concrete (ceiling) surfaces of any descriptions including racking out joints, hacking for keys, scrubbing down with water and disposal of unserviceable materials to out side of MD land complete all as specified & directed.
M&L for 15mm thick rendering in CM 1:6 on internal surfaces of wall, finished even and smooth without using extra cement complete all as specified & directed.
M&L 15 mm thick rendering in CM 1:4 on external surfaces of walls & top surfaces of chajja/roof, mixed with liquid water proofing compound as per Manufacturer's' instructions, surface finished even and smooth without using extra cement complete all as specified & directed. ( Note : Liquid water proofing compound will be measured and paid for separately against relevant item of BoQ)
Supply only liquid water proofing compound ISI Marked, of make as approved by GE complete all as specified & directed.
Demolition of cement concrete of any description (unreinforced) in ground floors and paving not exceeding 15 cms thickness (below or above ground level) including removal of debris to out side MD land complete all as specified & directed.
M&L for 25mm thick PCC (1:2:4) Type B-0 using 12.50 mm graded crushed stone aggregate as in floor, surface finished even & fair without using extra cement complete all as specified and directed.
M&L for non-skid joint free coloured ceramic tiles 7-8mm thick (square/ rectangular) area of each tile exc 0.18 Sqm but not exc 0.38 Sqm(600x600mm) as in vertical surfaces such as skirting/dado etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10 mm thick screed bed in CM (1:4) complete all as specified & directed.
M&L for non-skid joint free coloured ceramic tiles 7-8mm thick (square/ rectangular) area of each tile exc 0.18 Sqm but not exc 0.38 Sqm as in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed in CM (1:6) complete all as specified & directed.
M&L for non-skid joint free coloured ceramic tiles 7-8mm thick (square/ rectangular) area of each tile exc 0.11 Sqm but not exc 0.18 Sqm as in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed in CM (1:6) complete all as specified & directed.
Material and labour for Glazed ceramic tiles of size 350x 250x 7mm/ 450X 350X 7mm thick in vertical surfaces such as dado/ skirting etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10mm thick rendering in CM 1:4 all as specified
Taking down Chowkhats or frame with shutter (without taking off shutter from the frame) area n.exc 1.50 sqm each and removal complete all as specified & directed.
Taking down Chowkhats or frame with shutter (without taking off shutter from the frame) area exc 1.50 sqm but n.exc 4 sqm each and removal complete all as specified & directed.
S&F steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded complete all as specified and directed.
S&F steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete without glazing bars, dovetailed or welded complete all as specified and directed.
M&L for IInd class (Indian Sal, Bijasal, Hollock or Benteak) hardwood plain, solid, straight chowkhats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue, pinned at joints complete all as specified & directed.
S&F mild steel works as in Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required, hooks (stay), heavy, for large gates, hook and pintle hinges, large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165 complete all as specified & directed.
M&L for factory made second class (Indian Sal, Bijasal, Hollock or Benteak) hardwood glazed and skeleton shutters 35mm thick, open rebated and prepared to receive glass, gauze, etc divided into squares, with plain, chamfered or rounded, mitred and rebated sash bars, any numbers, edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc sizes of members of shutters as specified in SSR Part-I, Section 8, clause 8.24 (a) and fitted to chowkats complete all as specified & directed. Notes:- (i) glazing will be measured and paid for separately. (ii) Butt hinge will be measured and paid for separately .
S&F 35mm thick flush shutters, solid core construction with block board core and plywood face panels commercial type on one face and other side covered with decorative face veneer with liping/frame to match complete all as specified and directed.( Note : The unit rate quoted by the Bidder is deemed to include for provision of suitable blocks for taking mortice locks, latches , or other fittings)
S&F, 1mm thick wood grain printed PVC sheet fixed or laid on to flush doors by using rubber used adhesive, supplying & fixing at site as per specification, complete all as specified and directed
Supply & fix 300mm long aluminium alloy, anodised sliding door bolts with hasp & staple (bolt type) & fixing clips of sheet, cast or extruded section and fixing bolts & sliding bolts of extruded section or cast aluminium alloy complete all as specified & directed.
Supplying & fixing 300mm size ordinary rat tail rod pattern springs of mild steel including roller and roller plate complete all as specified & directed.
Supplying & fixing 100mm size butt hinges, extruded aluminium alloy with galvanized mild steel hinge pin, anodized, type C-21 complete all as specified & directed.
Supply and fix aluminium handles 150mm size, cast type, anodised complete all as specified & directed.
Supply and fix 150mm long aluminium anodised barrel tower bolts of extruded section complete all as specified & directed.
S&F in repair 18 mm thick ply , PVC sheet coloured Prelaminated on one side with approved texture as in kitchen cabinet ( with shelves and partition ) including necessary fittings & fixtures as per manufacturer's instrucions complete all as specified and directed
S&F continuous (piano) hinges, stainless steel bright finish or electro galvanised width of flaps (when open) n.exc. 36mm complete all as specified and directed.
S& F for Solid PVC moulded door frame of size 50mm x 95mm made from coloured PVC with rebate single/double to receive shutter including necessary block for fixing hinge and lugs complete all as specified and directed.
S&F, Factory Made Solid PVC Moulded Door Shutters with wood free EPS 28 to 30 mm thick (stile:), with 2,4 or 6 raised panel design with 2mm thick Moulded Prelam PVC Sheet on the front face & 2mm prelam PVC Sheet on back face with particle board core, supplying & fixing in frame at site as per specification & drawing complete all as specified and directed.
Taking up or down steel tubing and connections, including cleaning for refixing or removing to store of size 15mm bore of pipe complete all as specified and as directed.
Taking up or down steel tubing and connections, including cleaning for refixing or removing to store of size 20mm bore of pipe complete all as specified and as directed.
Taking up or down steel tubing and connections, including cleaning for refixing or removing to store of size 25mm bore of pipe complete all as specified and as directed.
Supply & fix 20 mm bore medium grade galvanised steel tubes with all fittings and fixed complete to walls and ceilings or laid in floor/ trenches complete all as specified & directed.
Supply & fix 25 mm bore medium grade galvanised steel tubes with all fittings and fixed complete to walls and ceilings or laid in floor/ trenches complete all as specified & directed.
Supply & fix 40 mm bore medium grade galvanised steel tubes with all fittings and fixed complete to walls and ceilings or laid in floor/ trenches complete all as specified & directed.
Supply & fix 50 mm bore medium grade galvanised steel tubes with all fittings and fixed complete to walls and ceilings or laid in floor/ trenches complete all as specified & directed.
Supplying and laying of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors with chase cutting, concealing, for 25mm dia including fitting and fixing in position with solvent and brass threaded fittings for fixing tap etc complete all as specified and directed.
Supplying and laying of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors with chase cutting, concealing, for 20mm dia including fitting and fixing in position with solvent and brass threaded fittings for fixing tap etc complete all as specified and directed.
Dismantling of water tank of any description of capacity exc. 250 litres but not exc. 500 litres, removing to store or from the site complete all as specified and as directed.
Supply and fix 500 ltrs capacity rotational moulded polyethylene water storage tank double layered (cylindrical vertical with closed top) hoisted and fixed in position complete all as specified & directed.
S&F Ball valves 20mm dia high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed, complete all as specified and directed (Minimum weight of ball valve -210gms).
Supply & fix in repairs, 25mm bore gun metal globe or gate valves, with iron wheel head, screwed both ends for iron pipe complete all as specified and directed.
Supply & fix 50mm bore gun metal globe or gate valves, with iron wheel head, screwed both ends for iron pipe complete all as specified and directed.
S&F bib tap suitable for 15mm bore GI pipe, PTMT, any colour, high pressure, screwed down for iron pipe complete all as specified & directed. ( Minimum weight - 120gm)
Material and labour for drilling and tapping cast iron / ductile iron water mains(in position) for Branch connection, of the internal diametre 50 to 20mm including necessary fittings suach as ferrules, nipple, short pipe etc complete all as specified & directed.
Supply & fix kitchen sink with drainage board made of stainless steel 1.0mm thick with plug, washers with and including 32 mm dia PVC rigid waste pipes and C.P coupling including fixing cantilever brackets of suitable shape & size as required at site and connecting unions to pipe, overall size 915 mm x 460mm, bowl size 410 mm x 330 mm x 160mm and necessary cutting to slab complete all as specified & directed.
Supply and fix in repair 10 ltr capacity PVC valve less syphonic action type flushing cistern low level 'white' with inlet ball valve, float valve & handle Including 32mm bore PVC flush pipe suitable for squatting(Orissa) Pan and brackets fixed to wall complete all as specified & directed.
S&F 0.63 mm thick stainless steel Kitchen plate racks, size 775 X 900 X 220 mm , fixed with wooden plug with suitable size of screws complete all as specified and directed.
S & F Door bottom Seal rubber ( 36 inch x 1.5 inch) etc, complete all as specified and directed
S&F PVC bath cabinet with mirror, size 400x500mm , of approved colour complete all as specified & directed.
Supply & fix, in repair, vitreous china squatting pan, Orissa pattern of size 580x440 mm white, with integral foot rest and PVC 'P' or 'S' trap including connection to trap, and to flush pipe, etc (excluding flushing pipe) and making good to floor complete all as specified & directed.
Supply & fix in repairs vitreous china wash down water closet pan (pedestal pattern) white (excluding fixing bolts, flushing cistern and flush pipe) but plastic water closet seat, black/ white, closed pattern with recessed bottom, and cover and mild steel chromium plated or aluminium hinging device, complete all as specified & directed.
S&F in repair brass chromium plated shower rose 125 mm size with or without swivel joint complete all as specified and directed.
S & F in repair 15 mm bore brass chromium plated Wall Mixer three in one including Provn of OH shower fancy type screwed down to GI pipe with CP brass cup complete all as specified and directed.
S & F in repair 15 mm bore brass chromium plated Wash Basin Mixer for hot & cold water with long shank and fly nut complete all as specified and directed.
S & F in repair 15mm bore brass chromium plated stop cock/angle cock fancy type long body with CP brass cup and screwed down to GI pipe complete all as specified and directed.
S&F in repair 15mm bore bib tap fancy type chromium plated long body cast copper alloy screwed down for iron pipes or for brass ferrule complete all as specified and directed by Engr-in-charge.
S&F in repair stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks or galvanized wire staples beads or in steel/wooden window complete all as specified and directed .
S&F Soap Dish,Chromium plated fancy type with brass screws and wooden/plastic cleats complete all as specified and directed.
S & F Shelf of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats complete all as specified and directed. (Minimum weight 300gms).
S&F 3 mm thick sheet glass, ordinary quality and glazing with oil putty /wooden beads in square n. exc 0.5 sqm in each pane complete all as specified and as directed.
S&F 3mm thick figured glass pin head type and glazing with oil putty or wooden beads in squares n exc 0.50 Sqmtr each pane complete all as specified and directed .
Supply & Fix in repair CP Towel Ring as approved by GE complete all as specified and directed.
S&F brass chromium plated tubular towel rail, 20 mm dia, D type, 60 cm long between flanges complete all as specified and directed.
M & L Granite (Black/Ruby Red ) work (table rubbed and polished) 20 mm thick in cooking platforms bedded and jointed with grey cement slurry and pointed with white cement with admixure of pigment to match the shade of granite stone including grinding and polishing complete over and including screed bed 15 mm thick in CM 1 : 6 and brushing with neat cement slurry with 3 kg of cement per sq metre complete all as specified and directed.
M&L for rounding to edges of granite stone slabs one edge, such as in cooking platform, and other similar situations complete all as specified and as directed.
M&L for machine cut cudappah stone slab as in cooking platform/ shelf , 20-25mm thick over & including 15mm thick cement screed bed in CM (1:6) laid and jointed with grey cement slurry mixed with pigment to match with the shade of the slab including rubbing and polishing complete all as specified & directed.
Taking down eaves gutters and rain water pipes (any size or pattern), including all fittings, head, shoes, bends, swan-necks atc., including cleaning or refixing or removal to store (measured overall as fixed along the centre line over fittings and accessories) complete all as specified & directed
S&F, PVC (SWR) pipes 110mm bore single socketed, in any length with rubber ring joints, laid in trenches or in walls complete all as specified and directed.
S&F, in repair PVC (SWR) pipes 75mm bore single socketed, in any length with rubber ring joints, laid in trenches or in walls complete all as specified and directed.
S&F PVC (SWR) bends ISI marked any radius of 110 mm bore with access door complete all as specified and directed.
S&F PVC (SWR) bends ISI marked any radius of 75 mm bore with access door complete all as specified and directed.
S&F in repairs PVC (SWR) junction single, (single T) equal or un equal of 110 mm bore of pipe complete all as specified and directed
S&F in repairs PVC (SWR) junction single, (single T) equal or un equal of 75 mm bore of pipe complete all as specified and directed
M&L 100 mm thick PCC 1:4:8 type D2 (using 40 mm graded stone aggregate) as in floor sub base and finished even and fair complete all as specified and directed.
M&L for Machine pressed precast cement concrete rubber moulded interlocking paver block any shape and size conforming to IS 15658-2006 of 80mm thickness, M-40 Grade of concrete, laid over and including 50 mm thick sand cushion complete all as specified and directed.
M&L for PCC 1:3:6 type C2 using 40mm graded stone aggregate, 75mm thick in plinth protection laid in panels and finished even and smooth without using extra cement including necessary form work complete all as specified and directed.
M&L for PCC 1:2:4, type B-1 using 20 mm graded stone aggregate as in coping, benching, bed block, lintel band, plinth courses etc and similar work including necessary form work complete all as specified and directed.
Providing precast reinforced cement concrete 1:2:4 type B-1 using 20mm graded stone aggregate in cover slabs (for manholes etc), shelves and similar articles with plain faces including necessary moulds and setting in cement mortar 1:6 complete all as specified and directed. Note:- Reinforcement shall be measured & paid for separately under respective item of BOQ.
M&L for mild steel TMT bars 10 mm dia and over as in reinforcement for concrete, cut to length, bent to shape required, including cranking, bending, hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.
M&L for complete removal of existing water proofing treatment including plaster if any from top of roof and canopies / chajjas of building including removal of debris out side MD land complete all as specified and directed..
M&L for 10mm thick rendering over roof surfaces in CM 1:3 with using liquid water proofing compound as per manufacturer's instructions, finished even and smooth without using extra cement complete all as specified & directed. Note: WPC shall be measured and paid for separately as "Supply Only" under respective item of BOQ.
M&L for applying evenly tack coat of hot blown bitumen 85/25 grade conforming to IS-702 @ 1.20 kg/sqm over & including a coat of bitumen primer @ 0.30 litre/ sqm consisting of 3/4 part bitumen of grade 85/25 and 1/4 part of kerosene oil on the top of prepared roof surfaces complete all as specified & directed.
M&L for 3mm thick APP modified Water Proofing membrane with minimum weight @3.50kg per sq metre laid over on roof surface with torch application and pressed on roof surface with roller, with minimum side over lap of 100mm and end over lap of 150 mm complete all as specified & directed. Note:- Suitable embedment of APP modified water proofing membrane shall be ensured into walls/parapet walls, special care shall be taken in laying APP modified water proofing membrane in situations such as drain/ expansion joints etc.
M&L for applying two coat of bituminous aluminium paint @ 200gm/ sqm over non-accessible roof over sealed surface of APP membrane complete all as specified & directed. Note- Bituminous aluminium paint shall be of same manufacturer as specified for polymeric water proofing membrane.
S&F fancy type drapery rods with two way wooden/brass brackets, 25mm bore, cut to length as required, of colour as approved by GE complete all as specified and directed.
S&F mild steel framed work such as grills, gratings etc with ends of bars shouldered and/ or riveted, or forged into spikes, framed guard bars and similar work conforming to Fe- 290 ( Gde-E-165) complete all as specified and as directed. Note: The unit rate quoted by contractor is deemed to be inclusive of cutting to dead lenth where required, notching, drilling, fitting, rivetting and/or welding or connecting with bolts and nuts (including rivets or bolt and nuts). No claim whatso ever shall be entertained by Govt on this account.
Dismantling of brick work or stone/ boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars etc but excluding ashlar ficings, dressed stone work and pre-cast concrete articles complete all as specified and directed.
M&L for brick work with sub class 'B' fly ash bricks, straight or curved on plan exc 6m mean radius built in CM (1:4) complete all as specified & directed.
Cutting holes in brick walls, exc. half brick but not exc. one brick in cement mortar for inserting holdfasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 Type B-1 as required complete all as specified and directed.
S&F 15mm bore PVC connection pipe 450mm long with brass nuts complete all as specified & directed.
S&F of chromium plated mild steel hat peg, set of 6, fixed to wall with PVC plugs and screw complete all as specified and directed.
M&L for preparation of new surfaces of iron/ steel of any description over 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of red oxide primer as approved by GE complete all as specified & directed.
M&L for preparation of new surfaces of wood or wood based materials of any description over 10 cm width or girth and applying two coat synthetic enamel paint of colour as approved by GE over and including a coat of pink primer complete all as specified & directed.
M&L for preparation of old painted surfaces of wood or wood based materials of any description over 10cm width or girth and applying two coat of synthetic enamel paint complete all as specified & directed.
M&L for preparation of old painted surfaces of steel of any description over 10cm width or girth and applying two coat of synthetic enamel paint complete all as specified & directed.
M&L for preparing new plastered or unplastered surfaces of walls and applying two coats of distemper, oil emulsion, white or tinted, with and including 2mm thick wall care putty and one coat of appropriate primer complete all as specified and directed.
M&L for prepration of old decorated plastered or unplastered surfaces of walls of any description by complete removal of existing treatment and applying two coats of distemper, oil emulsion, white or tinted, over and including 2mm thick wall care putty and one coat of appropriate primer complete all as specified and directed.
M&L for prepration of new plastered surfaces of walls and applying two coats of cement base paint over & including a coat of cement base primer complete all as specified & directed.
M&L for preparing old plastered or unplastered surfaces of walls and applying two coats of cement based paint complete all as specified and directed.
M&L for preparing old decorated plastered or unplastered surfaces of ceiling by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spot and applying two coat of white wash complete all as specified and as directed.
M&L for preparing new plastered or unplastered surfaces of ceiling and applying three coats of white wash complete all as specified and directed.
Taking down carefully any type of old unserviceable point wiring copper or aluminium conductor (light, fan, socket, bell or power) point complete with fittings such as switches ceiling roses, lamp holders, sockets, fan regulators, call bell, light fittings with PVC conduit surface / concealed or wooden battens including sunken cast iron / pressed steel terminal boxes etc and making good the disturbed surfaces of walls, roof, floors etc to match with the existing surfaces complete all as specified & directed by Engineer-in-Charge.
Taking down old/unserviceable distribution board by disconnection of electric connection carefully SPN DBs/TPN DBs/ Main Switch including old unserviceable MCCBs/ MCBs, Isolators, etc and making good to disturbed surface complete all as specified and directed at site.
Taking down existing exhaust/ ceiling fan of any size/ sweep for keeping the safe custody and re-fixing/ re-hanging the same after repair work or as directed and connecting up the same with & including twin twisted copper flexible wire from ceiling rose to exhaust/ ceiling fan complete all as specified & directed.
Taking down existing old/ unserviceable sub main wiring of any type and description, removal of teak wood batten/ PVC pipe/ PVC casing & caping and making good disturbed surfaces of walls, ceilings etc as per existing complete all as specified and directed.
M&L for provision of sub main wiring with two runs of single core FRLS PVC insulated, unsheathed, mutistranded copper conductor cable of size 6.0 sqmm drawn in and including rigid PVC conduit medium grade ISI marked not less than 20mm dia with its accessories, concealed type, including one run of single core FRLS PVC insulated, unsheathed, multistranded copper conductor cable of size 6 sqmm as earth continuity and cutting chases as per standard engineering practice & making good the disturbed surfaces as per existing finish complete all as specified & directed. Notes:- (i) Finished sub main wiring with two runs of 6.0 sqmm cable & one run of 6 sqmm cable alongwith PVC conduit and its accessories shall be measured and paid as one unit length. (ii) Connections of cables with MCBs or bus bars shall be done through appropriate size brass/copper thimbles. (iii) Colour coding for wiring/ bus bar/ main connection shall be followed .
M&L for provision of sub main wiring with two runs of single core FRLS PVC insulated, unsheathed, mutistranded copper conductor cable of size 4.0 sqmm drawn in and including rigid PVC conduit medium grade ISI marked not less than 20mm dia with its accessories, concealed type, including one run of single core FRLS PVC insulated, unsheathed, multistranded copper conductor cable of size 4 sqmm as earth continuity and cutting chases as per standard engineering practice & making good the disturbed surfaces as per existing finish complete all as specified & directed. Notes:- (i) Finished sub main wiring with two runs of 4.0 sqmm cable & one run of 4 sqmm cable alongwith PVC conduit and its accessories shall be measured and paid as one unit length. (ii) Connections of cables with MCBs or bus bars shall be done through appropriate size brass/copper thimbles. (iii) Colour coding for wiring/ bus bar/ main connection shall be followed .
M&L for point wiring concealed type with 1.50sqmm PVC insulated, unsheathed, single core, multistranded copper conductor FRLS cable 1100 volts grade including 1.5sqmm PVC insulated unsheathed multistranded copper copper conductor FRLS cable as earth continuity conductor drawn through in and including rigid PVC conduit not less than 20mm dia with its accessories, sunken type pressed steel terminal box made of 1.2mm thick MS sheet/ anodised steel box painted with one coat of red oxide primer including 3.0mm thick ISI marked laminated/ ebonite sheet cover for fixing switches/ socket/ regulators etc including all fixing accessories and cutting chases as per standard engineering practice & making good the disturbed surfaces as per existing finish for the followings complete all as specified & directed.
(a) One light point/Bell point controlled by one switch 5/6 Amp.
(b) One fan point controlled by one switch 5/6 Amp.
(c) One socket point controlled by one switch 5/6 Amp on same board.
(d) One socket point controlled by one switch 5/6 Amp on Independent board.
M&L for point wiring concealed type with 2.50sqmm PVC insulated, unsheathed, single core, multistranded copper conductor FRLS cable 1100 volts grade including 1.5sqmm PVC insulated unsheathed multistranded copper conductor FRLS cable as earth continuity conductor drawn through in and including rigid PVC conduit not less than 20mm dia with its accessories, sunken type pressed steel terminal box made of 1.2mm thick MS sheet/ anodised steel box painted with one coat of red oxide primer including 3.0mm thick ISI marked laminated/ ebonite sheet cover for fixing switches/ socket/regulators etc including all fixing accessories and cutting chases as per standard engineering practice & making good the disturbed surfaces as per existing finish for the one socket out let 3/6 pin, 15/16 Amps controlled by one no one way piano type switch on independent board complete all as specified & directed.
S & F in repair for bell ding dong AC 230 volts single pole one way complete all as specified and directed .
S & F in repair for Switch piano flush type AC 230 volts 5 Amps single pole one way complete all as specified and directed .
S & F in repair for Socket outlet 3 pin, 5 Amps and AC 230 volts flush type complete all as specified and directed.
S & F in repair for switch socket combination 3 pin 5 and 16 Amps AC 230 volts flush type complete all as specified and directed .
S & F in repair for Ceiling rose surface bakelite 65 mm x50 mm three terminal AC 230 volts flush type complete all as specified and directed .
S & F in repair fan regulator Step type of polycarbonate complete all as specified and directed .
Supply anf fixing in repair of LED lamp rotary type/holder type of 12 watt complete all as specified and directed.
Supply and fixing in replacement of decorative wall light fitting WITH LAMPS 9 WATT made up of Polycarbonate , City-1 , Cylindrical shape , with LED lamp 9 Watt complete with fixing arrangements on wall complete all as specified and directed.
Supply & Fixing Smart bright Batten Series, LED luminaire using LED 22 watt 110 Lumens/watt with diffuser which ensures uniform distribution and comfort, batten series features latest LEDs and delivers consistent light output, stable color start Extruded Aluminium housing, Energy efficient, Flicker free start Inbuilt driver unit, Suitable for wall and ceiling mounting using brackets with and including the luminaire testing on completion as per Standard Specification IEC 60598-2-1 / IS: 10322(Parts/Sec-l), complete all as specified and directed.
S & F in repair of LED Decorative /mirror light fitting 9 watt along with fixture Surface mounted suitable for indoor aplication , connector block, etc . Complete with all accessories internally pre-wired and including round wood block, connecting up with three core flexible flexible copper conductor cable suitable size complete all as specified and directed .
S & F in repair Bulk head endura LED light fitting complete with10 watt LED and making necessary electric connection to ceiling rose with copper conductor of suiyable size & length complete all as specified & directed.
Supply & fix in replacement of LED Security Light Luminaire 35 watt 6000K with .high power LED cool white,CRI 75,+/- 5% supply voltage 220/240/50 Hz, light engine driver base.pole adapter,powder coated pressure die cast aluminium with heat resistant toughened glass with lens type,GI pipe 40 mm dia medium Grade not less than with 1.2 m.long in any shape with 2 nos of pole fitting clamps made out of MS flat , nuts and bolts and painting with aluminium paint. complete all as specified and as directed.
S&F in replacement of sheet steel enclouser distribution boards, double door factory made TPN 4 way 3 phase 415 volts 4 way with 200 amps rating copper bus bar and PVC insulated copper jumpers of suitable size from the MCB to the out going circuits one comprising of 3 phase 4 wire of suitable rating all as specified and directed.
S & F MCB TPN 25 to 63 Amps, 240 Volts, minimum 10 KA, "C" series rupturing capacity and to be housed in DBs catered here in before complete all as specified and directed (Note :- Proper and suitable size cablecopper lugs to be fixed with MCBs are included in unit rate of each MCB of any rating)
Supply and fixing Single phase ceiling fan 1200 mm permanent magnet brushless DC Motor 230 v 50 Hz single phase 26-30watt rated current 0.16 amp,pf 0.98 370/360 rpm air delivery 220 cubic metre rated service value 629m3/min/watt, no of blades three, type of blade leaf 1.05 mm thick aluminium sheet remote control radio frequency 5 speed +off timer option speed regulation class of insulation two nos bearings including connecting wire complete with all as required and directed at site by eng in charge
Supply & Fixing in repair sheet metal enclosure MCB DB double door [Acrylic], single pole and neutral, 240 volts, 8 way with 200 Amp, 10 KA breaking capacity rated bus bar with blanking plate wherever required and IP-43 degree protection complete all as specified & directed.
S & F for MCB Single pole and neutral rated capacity 40 Amps, 240 Volts breaking capacity 10 KA, 'C' curve complete all as specified and as directed.
S & F for MCB Single pole rated capacity 6 to 40 Amps, 240 Volts breaking capacity 10 KA, 'C' curve complete all as specified and as directed..
Supply & Fixing in repair single pole and netural sheet metal enclosure with a two pin and earth plug and socket complete with 01 number single pole MCB 20 Amps complete all as specified & directed.
Earthing complete with galvanised steel earth plate electrode 60 cm x60 cm x 6 mm thick buried directly in ground ,(Earth pit not less than 2.25 meter deep below ground level) with top edge of plate not less than 1.5 meter below normal ground level ,connected to and including galvanised iron earth wire 4 mm dia by means of nut, bolts, check nuts and washers of galvanised iron or steel complete all as specified and directed including testing on completion including the material and labour of the following : - (a) Excavation and earth work for drilling hole for electrode in any type of Soil. (b) PCC pit in cement concrete 1:2:4 type B-1, Pre cast RCC cover with suitable handle 40 mm thick in PCC 1:2:4 type B-1, reinforced with welded steel wire fabric weighing not less than1.87 Kg/ Sq meter. (c) Funnel with watering pipe of GI 20 mm nominal bore light grade and lugs etc complete all as specified and directed (d) 15 mm nominal bore medium grade GI protection pipe 5 meter long for protection of earthing lead complete all as specified and directed. (e) Requisite quantity of common salt and charcoal. (f) Testing of earthing.
S & F in repair for bell push piano flush type AC 230 volts 5 Amps single pole one way complete all as specified and directed by Engineer in charge.
Supply and fixing Single phase propeller type ventilating ( Exhaust fan) heavy duty AC 230 volts 300 mm sweep, metallic body complete with Metalic louvers including making holes of suitable size and making good the disturbed surface and shutters including electric connection with pvc flexible twin core copper wire from ceiling rose to Exhaust fan, nut & bolt complete all as specified and as directed. NOTE:- Old US fans to be deposited to MES store
Supply and fixing Single phase propeller type ventilating ( Exhaust fan) heavy duty AC 230 volts 300 mm sweep PVC body complete , including making holes of suitable size and making good the disturbed surface and shutters including electric connection with pvc flexible twin core copper wire from ceiling rose to Exhaust fan, nut & bolt complete all as specified and as directed.. NOTE:- Old US fans to be deposited to MES store
Supply , laying and testsilng cable XLPE insulated , screened, PVC bedded , galvanized , steel strip or wire armoured, electric power cables ( Heavy duty ) 1100 volts grade with stranded aluminium conductor of size 4 core 25 Sqmm complete all as specified and directed by Engineer in charge . ( Note : Excavation and earthwork, sand cushioning and brick cable protection shall be measured and paid for separately against relevant items of this BoQ)
Supply,laying & fixing double wall corrugated (DWC) pipes made of high density polythethyline (HDPE) with all accessories i.e. all type of joints,Sockets,Elbows,bends and End caps etc with all as required and specified as directed by Engr in Charge.of size 50 mm outer dia and 38 mm inner dia complete all as specified and directed .
Excavation in trenches, n exc 1.5m wide and n exc 1.5m in depth , for foundation, etc or for shafts, wells, cesspits, manholes, pier holes,etc. n exc 10sqm on plan and n exc 1.5m in depth and getting out in any type of soil
M/L for Returning , filling in, including spreading, leveling, watering and well ramming in layers not exc 25 cm complete all as specified and as directed.
M/L for Removing excavated material n exc 50m and depositing where directed at a level n exc 1.5m above the starting point complete all as specified and as directed.
Schedule of credit amount of Rs 73,445.00 to be deducted during AOC
Arpit dixit construction
KRD ASSOCIATE
charanjeet singh
DEEPAK CONSTRUCTION
Kirti Chandeliya and Assosicates
M/S Modern builders
a k builders
M/s Ram Associates
stage.html
html • 0.07 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .