PROVN OF UNIT SHOP AT ZANGLI UNDER THE AOR OF GE 874 EWS

Surface excavation n. exc 30cm deep and averaging 15cm deep and getting out in soft/loose soil complete all as specified and directed.

Excavation in trenches n.exc 1.50m wide and n. exc 1.50m in depth and getting out soft/loose soil complete all as specified and directed.

Returning, filling in including spreading, levelling, watering and well ramming in layers not exc 25cm complete all as specified and directed.

Removing excavated material n exc 50m and depositing where directed at a level n exc 1.5m above the starting point complete all as specified and directed.

M&L for PCC (1:4:8), type D-2 using 40mm graded stone aggregate as in foundations, filling and mass concrete complete all as specified and directed.

M&L for brick work with sub class 'B' bricks, straight or curved on plan exc. 6m mean radius built in CM 1:6 complete all as specified and directed.

M&L for reinforced cement concrete (1:2:4), nominal mix, type B-1 using 20 mm graded stone aggregate as in lintel bands, gable bands etc complete all as specified and directed.

M&L for providing cement concrete 1:2:4 type B-1 using 20mm graded stone aggregate as in lintels up to 1.5m clear span, cills, steps, and other similar bands, plinth courses, string courses, lacing courses, parapets and railing up to 60cm height, copings, kneelers, apex stone, bed plates and the like including weathering slightly rounded or chamfered angles and throating, complete all as specified and directed.

M&L for formwork to sides of rough finished surfaces of RCC/PCC bands in walls, complete all as specified and directed.

M&L for RCC M-25 (Design mix) as in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc; basement slabs, under-reamed piles and mass concrete complete all as specified and directed.

M&L RCC M-25 (Design mix) as in Columns, pillars, piers, posts and struts complete all as specified and directed.

M&L RCC M-25 (Design mix) as in Beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and directed.

M&L for formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter with rough finish flat surface complete all as specified and directed.

M&L for formwork to sides and soffits of floor or roof beams, beam haunching’s, girders, bressummers, lintels, cantilevers, shelves including sup-ports, overhangs, etc. also splays between floors and beams, etc finish with rough finish flat surface complete all as specified and directed.

M&L for formwork to sides of pillars, posts, struts, piers, columns, and stanchions, etc finish with rough finish flat surface complete all as specified and directed.

M&L Mild steel TMT bars 10mm dia and over, cut to length bent to shape required including cranking, bending spirally for hooping for columns hooking ends and binding with and including mild steel wire (annealed not less than 0.9 mm dia or securing with clips quality conforming to FE-410-s or FE 410-0 complete all as specified and directed.

All as per item No-16 above but 6 to 8 mm dia bars as in stirrups/ spacers complete all as specified and directed.

M&L for rendering 10mm thick plaster on fair faces of brick work, internal face of wall in CM (1:6) finished even and smooth without using extra cement complete all as specified and directed.

M&L for rendering 15mm thick plaster on other than fair faces of wall in CM 1:4 finished even and smooth without using extra cement complete all as specified and directed.

M&L for applying two coats of cement base paint over a coat of alkali resistant primer including preparation of newly plaster surface of wall complete all as specified and directed.

M&L for applying three coats of white wash on wall including preparation of plastered or un-plastered surfaces of walls, complete all as specified and directed.

S&F for 9 mm thick plywood, grade BWR type BB fixed with nails to timber frame work as in ceiling, complete all as specified and directed.

S & F for 2nd class soft wood as in scantling, clean sawn fixed in unframed work, complete all as specified and directed.

S&F for plain fillets, rectangular or triangular in section clean sawn, secured with nails or brads sectional area exc 3 Sqcm & nexc 6Sqcm, second class soft wood (Kail) complete all as specified and directed.

M&L for applying two coats of synthetic enamel paint over a coat of wood primer including preparing surfaces of wood and wood based materials of any description not otherwise described over 10 cm width or girth complete all as specified and directed.

M&L for mild steel work as roof trusses (framed), trussed, purlins, posts, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc conforming Fe -410-W(gde-E-250) Quality A complete all as specified and directed.

M&L for Mild steel work for chimney bars (straight or camber) bearings bars trough or water bars for window frames; Window guard bars, plain let in and fixed independently in window frames, L or T section support for shelves etc, and similar articles confirming to Fe 250 gde E-165 complete all as specified and directed.

M&L for preparing new steel & iron surfaces of any description over 10cm in width or girth and applying two coats of synthetic enamel paint including a coat of red oxide primer complete all as specified and directed.

S & F steel windows with side hung shutters including projecting type hinges with handle and steel peg stay, complete with glazing bars, dovetailed or welded complete all as specified and directed.

S&F mild steel rolling shutters, Thickness of laths 1.25 mm without ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer; erected in position as indicated, complete: push pull or manual type complete all as specified and directed.

S&F sheet glass 5.5 mm thick, ordinary quality and glazing with oil putty in square exc 0.5 sqm in each pane complete all as specified and directed.

M&L for hardcore of gauge n exc. 63mm, deposited, spread and levelled in layers n exc. 100mm thick, watered and rammed to a true surface complete all as specified and directed.

M&L moorum/ red bajri filling in floors or pavings, laid in layers n.exc 15mm thick, spread, levelled and blinded with earth and rammed including watering complete all as specified and directed.

M&L for 100mm thick PCC 1:4:8 type D2 (using 40mm graded crushed stone aggregate) as in sub-bases complete all as specified and directed.

M&L for 50 mm thick PCC (1:3:6) type C-1 (using 20 mm graded crushed stone aggregate) as in plinth protection, surfaces finished even and fair complete all as specified and directed.

M&L for machine cut kota stone slab flooring 20-25 mm thick laid over and including cement screed base 15 mm thick in c:m (1:4) over and including 25mm thick PCC 1:2:4 type B-0 (using 12.50 mm graded crushed stone aggregate) and jointed with grey cement complete all as specified and directed.

All as per item No 36 above but on vertical surface such as skirting, dados, risers to steps, etc., set and jointed in neat cement slurry and pointed in coloured cement to match tiles, over and including 10 mm thick rendering in cement mortar 1:4 complete all as specified and directed.

S&F pre painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550MPa as in roof covering/cladding to wall, fixed with self tapping screw including necessary scaffolding, any type, any location/height complete all as specified and directed.

S & F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws including necessary scaffolding, any type, any location/ height complete all as specified and directed.

M & L for PCC (1:3:6) type C-2 as in foundation, filling and mass concrete (using 40 mm graded crushed stone aggregate) complete all as specified and directed.

M & L for brickwork with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius built in CM 1:4 complete all as specified and directed.

M&L for rendering 15 mm thick in CM 1:4 on brick masonry on fair faces of brickwork and finishing even & smooth without using extra cement complete all as specified and directed.

M&L for providing precast cement concrete (1:2:4), type B-1 using 20mm graded stone aggregate in landings, cover slabs (for man holes etc.) chullah hoods, chajjas, water troughs, mangers, shelves, drains and similar articles with plain faces set in CM 1:4 complete all as specified and directed.

M&L extra for forming fair finished drain or channel 45 cm inner girth in cement concrete using extra cement, including forms, moulds etc.

Removing excavated material to be a distance exc 250m but not exc 500 m and depositing where directed at a level n exc. 1.5m above the starting point complete all as specified and directed.

M&L for chequered cement concrete tiles 20cm x20cm x 25mm thick, with grey cement and pigment set, jointed and pointed in neat cement slurry in floors including 15 mm thick screed bed in CM 1:4 complete all as specified and directed.

M&L for point wiring for one light point/fan point controlled by one switch with cable 1.5 sqmm size PVC FRLSH insulated un-sheathed copper conductor single core multi strand flexible cable and 1.5 sqmm PVC FRLSH insulated un-sheathed copper conductor single core multi stranded flexible cable (green colour) as earth lead, 1100 volts grade including casing and capping (ISI marked) for one light/ fan point including 2nd class hard wood rectangular block open recessed cover with 3mm thick plastic laminated sheet cover including cutting chases to wall making good the disturbed surfaces to match with the existing specification complete all as specified and directed.

All as per item No 47 here-in- before but one 5 pin 5 Amps socket out let on Same board with 1.5 sq mm PVC insulated copper conductor for continuous earthing.

All as per item No 47 here-in- before but one 5 pin 5 Amps socket out let on independent board with 1.5 sq mm PVC insulated copper conductor for continuous earthing.

All as per item No 47 here-in- before but 6 pin15 Amps socket outlet on independent board with 2.5 sq mm PVC insulated and sheathed copper conductor with 2.5 sq mm PVC insulated copper conductor single core for continuous earthing.

Supply & fixing Switch piano type flush 6 Amp Single pole one way (ISI Marked) complete all as specified and directed.

S&F socket outlet multi 5 pins 6 amp, complete all as specified and directed.

Supply & fixing Switch socket combination 2 in 1, 3 pin, 5 and 15 Amp flush type universal controlled by one switch (ISI marked) complete all as specified and directed.

Supply & fixing Switch socket combination 2 in 1, 3 pin, 5 Amp flush type universal controlled by one switch (ISI marked) complete all as specified and directed.

Supply and fixing LED lights fitting 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed.

S & F LED light fitting 1x9W/10W bulk head luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.

Supply & fix 35/45 Watts LED luminaries building security light, Energy saving, environmental friendly, long life, exclusive innovative die-cast aluminium flood light with high power LEDs as light source with IP 66 protection and including driver unit etc complete all as specified and directed.

S & F in repair DB with sheet metal enclosure 415 volts, 4 way with rated bus bar Three pole & neutral (TPN) double door including fixing on suitable rectangular block complete all as specified and directed.

Supply and fix MCCB Metal enclosures, along with MCCB FP 63 Amps 415 Volts 16KA fixing in Metal enclosure, in wall mounted type complete with all accessories, connecting the cables with proper complete all as specified and directed.

S&F sheet metal enclosure for DBs (Double door type) when MCBs to be used single pole and neutral 4 way including blanking plate as required with 200 amps rated busbar 240V fixed sunk/flush to the wall or niche complete all as specified and directed.

S&F MCB 'C' series, SPN 240V, 32 Amp complete all as specified and directed.

S&F MCB 'C' series, single pole 240V , 6 to 32 Amp complete all as specified and directed.

M & L for sub main wiring with two single core 4 sqmm PVC insulated and unsheathed 1100 volts grade, stranded copper conductor FRLSH ISI marked drawn into & including medium grade PVC conduit/ casing caping 25 mm dia with all fittings and accessories and one continuous run of 4 sqmm copper conductor PVC insulated (green colour) as earth wire fixed into PVC casing / conduit (not less than 25mm outer dia) with all fittings and accessories fixed concealed/ surface submain wiring and making good disturbed surface complete all as specified and directed.

S & F XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, 3.5 core 35 sqmm cross sectional area in trenches or walls complete all as specified and as directed.

M&L for sand cushioning for protection of PVC cable with approved sand of uniform thickness, laid dry, by filling in trenches and punning to proper required cover complete all as specified and directed.

M & L Sub class ‘B brick, old size, brick covering laid dry, flat, transversally along the length of cable on sand cushioning, with width equal to the length of the brick, complete all as specified and directed.

Earthing complete with galvanised steel earth plate electrode 60×60cm.× 6mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less 'than 1.5 metres below normal ground level, connected to galvanised iron strip 25×4mm by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 3 connected to earthing test point all as specified or indicated including testing on completion complete all as specified and directed.

Please Enable Macros to View BoQ information