PROVISION OF CERTAIN MINOR WORKS PHYSICAL TRAINING APPARATUS COMPRISING OF FOUR CHIN UP BARS AND FOUR BEAMS EACH WITH OVERHEAD PROTECTION AT 3MTR MARGAO AND COVERED SHED OF B COY BLDG NO 178 B AT 6TTR PONDA UNDER GE PANAJI GOA

Amount

Excavating in post holes (or similar holes) each not exceeding 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, in soft/loose soil complete all as specified and as directed.

Excavating in post holes (or similar holes) in hard/dense soil, each not exceeding 0.50 cum getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm watering, and removing surplus soil to a distance not exceeding 50m and making good disturbed surface complete all as specified and as directed.

Material and labour for cement concrete 1:2:4 Type B2, using 40mm graded aggregate as in foundations, including rafts, footings, foundation beams, plinth beams; bases for columns, etc. basement slabs, under-reamed piles and mass concrete complete all as specified and as directed.

Supply and fixing roof plates with sleeve pieces riveted or welded thereto, and similar roof and ceiling connections complete all as specified and as directed.

Supply and fixing steel work in tubular trusses including special shaped washer, welding, hooping etc complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240 complete all as specified and as directed.

Supply and fixing for rolled mild steel work in roof trusses (framed ), trussed, purlins crane gantries , rafts and fastening and heavy brackets framming (beams tee, angle channel and or flat sections) including distance pieces, cleat nut bolts etc quality confirming to Fe-290 (Gde E-165) complete all as specified and as directed.

Supply and fixing pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed.

All as per item No 7 Above but for plain sheet on ridge Roof

Material and labour for two coats of synthetic enamel paint over one coat of red oxide primer on steel surfaces of any description over 10cm width or girth including preparation of new surface complete all as specified and as directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25 cm in hard/dense soil complete all as specified and as directed.

Removing excavated material not exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and as directed.

Material and labour for rendering 15mm thick plaster in cement mortar 1:4 on external surfaces such as stone masonry surfaces mixed with using water proofing compound finished even and smooth without using extra cement complete all as specified and as directed. (Water proofing compound shall be measured and paid for separately)

Material and labour for applying two coat of cement based paint over a coat of alkali resistant priming paint primer of new surfaces of walls complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish of the premises complete all as specified and as directed.

Supply and fixing glazed ceramic tiles 300 x 200 x 7mm thick coloured on vertical surfaces such as dado skirting etc set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed.

Material and labour for rendering 10mm thick on brick or concrete surface in cement mortar 1:4 finished even and fair to received glazed tiles complete all as specified and as directed.

Supply and fixing Bib tap 15mm standard of PTMT any colour high pressure, long body screwed for CPVC pipe and fixed in repair (Minimum weight 15mm-120gms) 15mm bore complete all as specified and as directed.

Supply and fixing Stop valve 20mm of PTMT any colour high pressure screwed for iron pipe and fixed. (Minimum weight 15mm-90gms/ 20mm-92gms) complete all as specified and as directed.

Supply and fixing Stop valve 15mm of PTMT any colour with long shank and cup (concealed type), (Minimum weight 15mm-110gms/20mm- 112 gms) complete all as specified and as directed.

Supply and fixing Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat section) including distance pieces, cleats etc conforming to Fe 410-W(Gde-E-250) complete all as specified and as directed.

Supply and fixing compound girders and stanchions lattice girders aerial masts, staging for water tank and like including cap and bases , splices etc built up from two or more beam or channel section or angle with plates including all lattice bars stiffeners, gusset plate. Fe 290-W(Gde-E-165) complete all as specified and as directed.

Disconnecting and Supply and fixing rotational moulded polythylene water storage tank (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part -I (2000Ltrs) capacity complete all as specified and directed.

Taking up or down steel water tubing 15mm bore pipe complete all as specified and as directed.

All as in item No. 23 above, but 20mm bore pipe.

All as in item No. 23 above, but 25mm bore pipe.

Supplying & laying CPVC water tubing outer dia 20mm, SDR-11 grade with all fittings and fixed complete to walls and ceiling or laid in floors complete all as specified and as directed.

All as in item No. 26 above, but 25mm bore pipe.

All as in item No. 26 above, but 32mm bore pipe.

Sagar Constructions