E quotation for SITC of asthetic facade lighting for chatrapati shivaji maharaj statue, S N 234 reservation no 72 in Lonavala Municipal Council dist Pune

Amount

SITC of 30 w LED Facade/Flood light luminaire IP65/66, made of single piece high pressure die cast aluminum alloy (ADCI) body of Rectangular shape with heat resistant silicon gasket and having PMMA optics lens for asymmetrical rectangular beam of horizontal axis as per site requirement with extra Clear thermally hardened glass cover. The fixture should have high power LEDs preferred make of LED – OSRAM, CREE, SEMICOM, Niche. CCT- 3000K to 6500K as per site Engineer. Lenses used in the fixture should be of LEDIL / CATHODE. The Luminaire should be driverless and compatible with CCS and CDS. (1. Tof- 30W- 16 nos. 2. other any structure 10 Nos. )

SITC of 60 w LED Facade/Flood light luminaire IP65/66, made of single piece high pressure die cast aluminum alloy (ADCI) body of Rectangular shape with heat resistant silicon gasket and having PMMA optics lens for asymmetrical rectangular beam of horizontal axis as per site requirement with extra Clear thermally hardened glass cover. The fixture should have high power LEDs preferred make of LED – OSRAM, CREE, SEMICOM, Niche. CCT- 3000K to 6500K as per site Engineer. Lenses used in the fixture should be of LEDIL / CATHODE. The luminaire should be driverless and compatible with CCS and CDS. (for Flag)

SITC of 100 w LED Facade/Flood light luminaire IP65/66, made of single piece high pressure die cast aluminum alloy (ADCI) body of Rectangular shape with heat resistant silicon gasket and having PMMA optics lens for asymmetrical rectangular beam of horizontal axis as per site requirement with extra Clear thermally hardened glass cover. The fixture should have high power LEDs preferred make of LED – OSRAM, CREE, SEMICOM, Niche. CCT- 3000K to 6500K as per site Engineer. Lenses used in the fixture should be of LEDIL / CATHODE. The luminaires should be driverless and compatible with CCS and CDS. (For Statue)

SITC of Surface/Wall Mounted Mashaal Light having IP65. LED 20W 2200K CCT, Diffused beam angle. (For Wall Sureface)

SITC of high quality LED Linear wall washer lights, Protection Rating : IP65, Additional wall mount yoke arrangements for fixing the lights. Power : 12 X 3W, Warm white IP65, Beam Angle 25 deg, Body : Extruded aluminium with waterproof air valve to balance pressure, get rid of moisture on glass innerface. (According to location for wall illuminate)

SITC of warm white LED linear light embedded in Aluminium extrusion flex base 10mm with height 18mm designed specifically to deliver high quality linear light effect. This is new light source which reduces power consumption while delivering significantly greater effect Linear lighting functionally and an unrevealed light quality. LED linear light with 80 LEDS/ mtr, LED wattage 8w/mtr with high quality AL extrusion. Should comply IP 66/68. CCT 2700K to 3000K. ( Border 200 mtr)

Distribution Control Panel: SITC of Control Panel-Distribution ( upto 400 watt ) CRCA Powder coated Box Size 375 x 150 x 295 mm, Made of CRCA Sheet with powder coating. Hinged door with safety lock system with IP55/ IK 10. All cables will be connected to a terminal by crimp lugs and routed through truff.

SITC of Centralized Control Panel as switching point, made from 14 SWG MS/CRCA sheet of size 1.2x0.9x0.45 mtr, with slanted Roof & minimum 2 Louvers on side walls, Front Single Door (Flush / surface finish type) hinged (3 Nos) from inside with Double folded 14 SWG MS Sheet with rubber gasket on the touching face of edge, complete with powder coating. Hinged door with safety lock system with IP55/ IK 10. The Control Panel wired up with 16 sq.mm Copper stranded single core PVC insulated wire for power wiring & 1.5 sq.mm single core PVC insulated copper wire for control wiring. Earthing connection stud provision on both side faces. Electronic Stabilizer of required KVA Rating of range 10-20 KVA, operating voltage range 90-300V, neutral Busbar 300 mm with insulated support, with protecting & controlling Devices such as MCB/ contactors as per requirement. With I/C 100 A Kitkat Fuses 3 Nos. All Accessories mounted on Plywood 19 mm Thick of approx. Size 1.0 m x 0.8 m All cables will be connected to a terminal by crimp lugs and routed through truff.

Supplying, erecting & terminating XLPE Flexible cable 4 core 4 sq. mm. copper conductor continuous 5.48 sq. mm. (12 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/ pole or laid in provided trench/ pipe as per specification.

Supplying and erecting Un-armoured control cable with ISI mark stranded / solid copper conductor 1.1 kV grade complete erected on wall / panel or in provided trench in an approved manner.3 core 1.5 sq mm.

Supplying, erecting & terminating XLPE armoured cable 4 core 25 sq. mm. aluminium conductor with continuous 5.48 sq. mm. (12 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification.

Supplying and erecting HMS PVC conduit 32 mm dia. with PVC accessories on wall / ceiling as per specification No: WG-MA/CON.

Supplying and laying (including excavation of suitable width & depth up to 90 cm) 50 mm outside dia. double wall corrugated pipes (DWC) of HDPE for enclosing cable below ground/road surface, to required depth complete.

Supplying, erecting & marking DPMCB 6 A to 32 A B- series (for lighting) in provided distribution board as per specification .

Providing earthing with galvanized iron earth plate size 60 x 60 x 0.6 cm with funnel with a wire mesh for watering and brick masonry block C.l. cover complete with all materials, testing & recording the results as per specification.

Providing and Back filling back filling ground enhancing compound 25 kg bag complete.

Supplying and erecting iron, sheet metal work consisting of CRCA sheets, various sections of iron, plates, chequered plates, rods, bars, MS pipes, etc. for panel board or any other purpose with bending, cutting, drilling and welding complete erected at the position with necessary materials duly painted with one coat of red oxide and two coats of enamel paint to match the switchgears or as per directions by the authority.

Supplying and erecting metal work in CRCA sheet with fabrication of boxes, panel boards, etc. including cutting, bending, drilling, welding, riveting, treated with anti-rust treatment and duly powder coated or painted with one coat of red lead paint and 2 coats of enamel paint complete.

Making cement concrete foundation in 1:3:6 cement concrete, (20 to 25) mm. stone metal duly plastered with necessary curing for complete. (pole muffing or any other purpose).

Sumi Electrical Services (BID ID -6844810)

ELECTRO MECHANICS (BID ID -6844955)