Interior Painting, Deep Cleaning, Waterproofing, Plaster Patch Repair of Rooms, Flats and Common Areas at RGNAU, Fursatganj, Amethi 229302

Deep Cleaning of all interior surfaces (walls, ceilings, floors, window sills, ledges, electrical fixtures, fittings, mirrors, sanitary fittings including commode seats & washbasins, windows, doors, door/window frames, grills, common corridors, staircases, and other exposed surfaces) in unoccupied flats/rooms and common areas heavily affected by bird droppings, dust, cobwebs etc. including removal of bird droppings by mechanical & eco-friendly chemical methods, high-pressure water jet cleaning / scrubbing with approved detergents/disinfectants, thorough rinsing, mopping and disposal of debris/waste as per environmental norms (cleaning prior to any repair/painting work including final cleaning after painting before handover).

Repair to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sqm and under, including cutting the patch in proper shape with half brick backing, including disposal of rubbish, all complete as per direction of Engineer-in-Charge (for plaster patch repair after hacking loose plaster and applying 1:4 cement mortar to true line, level & plumb with 7 days curing).

Waterproofing Chemical Treatment on Walls — Application of approved high-performance interior waterproofing solution such as Asian Paints SmartCare Hydroloc Xtreme, Dr. Fixit Sureseal, Berger Dampstop or equivalent on all internal wall surfaces (including repaired patches) prone to or showing signs of seepage/dampness/efflorescence as directed by the Engineer-in-Charge. Treatment on both affected and preventive basis. Surface preparation: clean, sound, free from dust, oil, grease, and loose particles; dampen the surface before application. Minimum two coats with proper overlapping at joints and corners. The treatment shall render the wall surface waterproof, resist efflorescence and provide a suitable base for painting. For areas affected by efflorescence where plaster is loose or hollow, the loose plaster shall be completely removed, the surface cleaned of all salt deposits using suitable mechanical and chemical methods, and fresh cement mortar plaster applied. Thereafter, approved waterproofing solution shall be applied in minimum two coats.

Wall painting with acrylic emulsion paint, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour: One Coat

Wall painting with acrylic emulsion paint, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour: Two or More Coat

Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound ) content. With water thinnable cement primer on wall surface having VOC content less than 50 grams/ litre, wherever required and as directed by Engineer In Charge

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.

Providing and Fixing Pigeon Net in balconies of 4 flats — Supplying and fixing heavy-duty UV-stabilized HDPE pigeon/bird protection net (mesh size approx. 1" x 1" or approved), including necessary fixing arrangement with GI wires / clamps / fasteners on balcony of height 12 ft and width 12 ft per flat, complete as directed.

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : One or more coats on old work