Tender ID

Karnataka

Retender

Works

Lift Irrigation Scheme

Filling of Biranaholi Tanks from Ghataprabha river Through Lift Irrigation Scheme in Belagavi Tq Dist Belagavi (4702/2024-25)

Minor Irrigation Department

Minor Irrigation Division Belgaum | Karnataka

Amount: ₹3.4 CrCloses: 24 Feb 2025Closed

Tenderkart AI

Reads all tender documents

Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.

Timeline

Published15 Feb 2025
Closed24 Feb 2025
Retendered15 Feb 2025

Cancellation Details

Retendered

RetenderedRetenderedReason: Retendered

Published 15 Feb 2025

Tender Value

₹3.4 Cr

EMD Value

₹5.1 L

Closing Date

24 Feb 2025, 9:30 pmClosed

Tender Inviting Authority

Office Inviting Bids

Minor Irrigation Department

Contact Person

Mahadev B

Office Number

Work Description

Filling of Biranaholi Tanks from Ghataprabha river Through Lift Irrigation Scheme in Belagavi Tq Dist Belagavi (4702/2024-25)

Tender Information

Tender ID

MI/2024-25/LI/WORK_INDENT4567

Reference Number

MI/2024-25/LI/WORK_INDENT4567

Tender Type

Open

Product Category

Lift Irrigation Scheme

Form of Contract

Two Tender Document System(Two Cover)

Location

Minor Irrigation Division Belgaum

Source Website

Subscribe to view

Documents Required

12 documents required · 12 mandatory

Technical Bid

RequiredAnnual Turnover Certificate

RequiredContractor Registration Certificate

RequiredWork done certificate

RequiredWork done certificate showing quantities of different items executed

RequiredMachineryPurchase Invoice / second sale agreement

RequiredLine of Credit

RequiredTurnover & work in hand

RequiredGST Registration Certificate

RequiredPAN & TAN Certificate

RequiredScanned signature of the bidder/representative to be attached while uploading the bid document

RequiredFormats as per Section 3, Qualification Information

RequiredThe tenderer shall also disclose if there are any bankruptcy proceedings against him.

Eligibility Criteria

Tenders from Joint ventures are not acceptable.

Bidders shall not be under a declaration of ineligibility for corrupt and fraudulent practices issued by Government of Karnataka

Bidders shall ensure upload of relevant document certifying his/her status as Scheduled Caste/ Scheduled Tribe/other reserved category as prescribed in the tender document.

It shall be the responsibility of the Bidder to ensure credit of Tender Processing Fee and EMD into the respective receiving bank accounts of e-Procurement on or before the last date and time of bid submission.

EMD Payments through e-Payment mode shall be made as one single transaction and payments made in part are liable for rejection.

The Tender are invited as per Standard Tender bid document KW-4

Conditional Tenders will not be considered

All relevant documents as per the KW-4 need to be uploaded while submitting bid in general documents provision in KPPP portal.

The Employer reserves the right to accept or reject any of the tender without assigning any reason

The contractor has make his own arrangements for procurement of all the required materials and the materials so procured shall confirm to the relevant IS Specifications or Equivalent and obtain necessary quality certificate from authorized quality control.

The Contractor is fully responsible for the Equipment / Material until the same is handed over to the EXECUTIVE ENGINEER in an operating condition after commissioning. The Contractor is responsible for the proper maintenance of equipment / material as well as protection of the same against theft, elements of nature, damages etc., while in his custody as well as after erection until the same is taken over by the EXECUTIVE ENGINEER under due acknowledgment in writing

All the documents required as per technical qualification criteria needed to be uploaded in Original or Attested by any official not below the rank of Executive Engineer or Notary

The Contractors should submit all the Documents as uploaded in Original or duly attested by a Notary/an officer not below the rank of an Executive Engineer on or before opening of Technical Bid as Notified

Name, address, and telephone, telex, and fax numbers of the contractor is to be provided

The contractor has to furnish Additional security deposit for unbalance tender as per clause 29.1 of ITT, to an amount equal to difference in contract price and amount put to tender, in addition to 5% performance guarantee (in any of the form prescribed) while concluding the Agreement

Unique Document Identification Number (UDIN) from Practicing Chartered Accountant is preferred in Annual Turn over

The intending bidders are advised to visit the site of work and make themselves familiar with the local situation regarding the availability of the construction materials, workmen, land required for construction activities etc

The tenderer shall also disclose if there are any bankruptcy proceedings against him

The Contractor shall provide work program as per Clause 25 under the chapter Time control of conditions of contract. The contractor should adhere to the accepted execution plan submitted by him under any circumstances without linking to the pending payment of the work

During the execution of the works, if any minor minerals are required, contractors have to abide by the Karnataka Minor Mineral Concession Rules 1994 (as amended up to date). As per the prevailing rules for any use of minor minerals the contractor has to submit the Mineral Dispatch Permit obtained from Mines and Geology Department. If Mineral Dispatch Permit (MDP) is not submitted by the contractor along with the bill, the prevailing penalty and DMF contribution as per Karnataka Minor Mineral Concession Rules 1994 ( as amended from time to time) will be deducted from the contractors bill at the time of payment

The Work Done Certificates shall be issued by the Executive Engineer (if work done in Karnataka State), otherwise it shall be issued/ counter signed by Superintending Engineer (if work is done in other states).

A copy of GST registration certificate should be uploaded

The tenderer has to quote his rate by excluding GST. However contract will be conuluded for the AMOUNT (Exclusive of GST) but applicable GST will be paid extra prevailing at the time execution. If the GST rates are revised during the contract period the Tenderer/Employer has to accept the revised GST rates for making payment/recovery.

Estimate rates are excluding GST as per Common SR 2023-24 and prevailing GST (18 Percent of Amount put to Tender) amount is kept in form of Overhead sum in sanctioned estimate. According to guidelines in Common SR Amount put to tender and ECV amount are including GST. KPPP Portal format has No Options to add GST separately. The item wise rates do not include GST. Hence, GST will be paid separately for the quoted amount accordingly. Declaration Certificate must be attached mandatorily

If the GST rates are revised during the contract period, payment will be made/withdrawn accordingly

For Works estimate cost more than Rs. 100.00 Lakhs : For Quality control tests of materials the contractor should provide required Rammer with Core Cutter, Balance and Moisture Meter, size 15x15x15 cms Mould Sets and for testing of sand and metal set of required mesh etc.

i. Death of Contractor:In case of death of contractor after executing the agreement/commencement of the work, his legal heir, if an eligible registered contractor and is willing can execute and complete the work at the accepted tender rates irrespective of the cost of work.

ii. Method of Bidding a.If the bid is made by an individual the bid documents shall be signed by the individual with his full name and current address.

b.If the bid is made by a proprietary concern, the bid documents shall be signed by the proprietor with his full name as well as the same of the firm and full address. In the case of an authorized person holding power of attorney signing the bid documents, a certified copy of the registered power of attorney should be uploaded. The signature of the proprietor or authorized person shall be attested by a notary public and enclosed as a documentary evidence.

c.If the bid is made by a partnership fir, bid documents shall be signed by a partner holding power of attorney for siging the bis documents. A certified copy of registered power of attorney should be enclosed to the bid. It is also mandatory to furnish a certified copy of the registered partnership deed, current address of the partners, registered address of the firm along with the bid. The signatures of all the partner/power of attorney shall be attested by a notary public and enclosed as documentary evidence.

d.If the bid is made by a limited company or a limited corporation is shall be signed by a duly authorized person holding power of attorney for signing the bid documents in which the bid documents in which case certified copy of the registered power of attorney shall enclose satisfactory evidence of its existence along with the bid.

e.The bids form the contractors /firms shall be accompanied by an attested copy of the Income tax return certificate along with CPC (Central Processing Cell) acknowledgement certificate and goods and Services Tax Certificate relating to the previous financial year.

iii. Monthly Progress Reportsa.The Contractor shall submit a progress report to employer before 5th of every month regarding the progress of work done in the previous month. Such progress report shall consist.

b.Items of work done with approximate quantities.

c.Machinery and vehicles employed during the month with respective RC numbers and period of usage (days, hours)

d.Daily labour reports

e.It is the duty of the contractor to properly manage men and machinery deployed for the work and to see that no machinery/vehicles is kept idle unnecessarily and withraw my excess machinery and vehicles not required for the work

As Per the condition laid down in Govt Letter vide MID/319/MISU/2024,(3) Dated:16.07.2024 as condition that the works should be completed within the approved grant. Hence the contractor should quote rates similar to approved estimate price (including GST) or below the approved estiamte price (including GST)

Technical Criteria

General

Minimum financial turnover (civil engineering construction works) not less than two times the annual payments from this contract (Rs. xxxxx Lakhs)

Satisfactoriy completed (atleast 90%) as prime contractor at-least one such similar work of value not less than Rs. xxxxxxx (80% of estimated cost of tender)

Executed in any one year the following minimum quantities of work (Cement Concrete - xxxx cum, Earthwork - xxxx cum, etc) (80% of peak rate of construction)

Tenderer or his identified Sub Contractor should possess valid Electrical License for executing building electrificatio works and should have executed similar electrical works totallng Rs. xxxxxx (not less than 50% of electrical works) n any one year

Tenderer or his identified Sub Contractor should possess valid license for executing water supply / sanitary engineering works and should have executed similar works totallng Rs. xxxxxx (not less than 50% of electrical works) n any one year

Owning the following key and critical equipment for this work (xxxx, xxxx, xxxx)

Liquid assets and /or availability of credit facilities of no less than Rs. xxxxxx Lakhs (estimated cash flow for 3 months of peak construction period)

Total value of civl engineering works executed and payments received in the last five years (year-wise)

List of existing commitments and ongoing works

List of works for which tenders already submitted

Banker Details for reference

Construction equipment owned by the tenderer and equipment proposed to be deployed on this contract, if awarded

Reports on the financial standing of the tenderer, such as profit and loss statements and auditor’s reports for the last five years

Qualification and experience of the key technical and management personnel in permanent employment with the tenderer and those that are proposed to be deployed on this contract, if awarded

List of Financial Resources with Certificates

Past Experience

b) Satisfactorily completed (at least 90% of the Contract value), in last five years (I,e 2019-20 to 2023-24) as prime contractor, at least one similar work such as Lift Irrigation Scheme work to an extent of 50% of the cost of the work Rs.170.00 Lakhs. Work Done Certificates shall be issued by the Executive Engineer (if work done in Karnataka State), otherwise it shall be issued / counter signed by Superintending Engineer (if the work is done in other states)

Work Done Certificate

cExecuted in any one year, the following minimum quantities of workExcavationandEmbankment combinedquantities6530CumSupplyingandfixing OPVCpipes200and250mmdia4300RmtrSupply fixingofVerticalTurbinepumpsetswithelectrical upto90HP3NoCementConcreteIncludingRCC PSC170CumProviding Steel Reinforcement fabrication12900Kgs

Work Done Certificate

Financial Status

3.2 To qualify for award of this contract, each Tenderer in his name should have in the last five years i.e. (2019-20, 2020-21, 2021-22, 2022-23, 2023-24)Achieved in at least two financial years a minimum financial turnover (in all classes of civil engineering construction works only) of Rs.677.00 Lakhs. Financial turnover of previous years will be given a weightage of 10% per year to bring them to price level of FY 2024-25

Audited CA Certificate of Annual Turnover

Assessed available tender capacity -AxNx1.5-B where A -Maximum value of civil engineering works executed in any one year during the last five years (i.e. 2019-20 to 2023-24)(updated to 2024-25 price level) taking into account the completed as well as works in progress. N-Number of years prescribed for completion of the works for which tenders are invited. B-Value, at 2024-25 price level of existing commitments and on-going works to be completed during the next 09/12 years (period of completion of the works for which Tenders are invited) Note -The statements showing the value of existing commitments and on-going works as well as the stipulated period of completion remaining for each of the works listed should be countersigned by the Employer in charge, not below the rank of an Executive Engineer or equivalent

Audited CA Certificate of Annual Turnover

Others

3.3 Each Tenderer should further demonstrateaAvailability by owning at least 50percentof the required/specified key and criticalequipment for this work and (b) the remaining50percentcan be deployed on lease/hire basis for all works provided the relevant documents (commitment agreements etc.,) for availability for this work are furnishedHydraulicExcavator2NosLorry Tipper Tractor2NosHydraulicMobileCraneforpipelaying2Nos ConcreteTransitMixer1Nos

Others -- Machinary

b) Liquid assets and /or availability of credit facilities of no less than Rs.113.00 Lakhs (Credit lines/ letter of credit/ certificates from banks) for meeting the fund requirement etc.

Line of Credit

Fee & Financial Details

Tender Fee Amount

₹5,000

EMD Fee Amount

₹5.1 L

Important Dates

Last Activity

15 Feb 2025

Published

15 Feb 2025

Bid Opening

25 Feb 2025

Download Ends

21 Feb 2025

Pre-Bid Meeting

21 Feb 2025

BOQ Preview

•

PUMPING MACHINERY

•

Design, manufacture, supply, erection, trail running, performance testing and commissioning of vertical turbine pump of approved make conforming to IS: 1710 having specified pump output under specifie...

•

Providing and fixing Wafer type single flange Butterfly valve conforming to relevant IS 13099/9991 EN GGG40/50 with latest amendments as detailed below of the following diameter and types with TP set ...

•

Supply and fixing of Cast steel ASTM A 216 Gr.WCB double flanged Dual plate check valve Conforming to API 594 with latest amendments Shaft material shall be SS420 /431 and spring shall be spring steel...

•

Manufacturing, supplying, laying in position, aligning, jointing, testing and commissioning of electric resistance welded / submerged arc welded mild steel ( Fe- 410 grade ) delivery pipes of specifie...

•

Manufacturing, supplying, laying in position, aligning, jointing, testing and commissioning of electric resistance welded /submerged arc welded mild steel (Fe-410 grade) manifold pipe system of specif...

•

Design, fabrication, supply, erection, testing and commissioning EOT crane consisting of double girder box type construction, rail mounted end carraiges with long and cross travel arrangement, main an...

•

Supplying, installing and commissioning electrode actuated water level transmitter of approved make with all accessoreis to protect against dry running of pump etc., complete with all leads & lifts, a...

•

Supply and installation of floor mounting type LTAC panel of approved make fabricated from sheet metal and painted with provision for suitable incoming and specified number of outgoing feeder inlets w...

•

Supplying and drawing Copper control Cable manufactured with electrolytic grade flexible copper with low conductor confirming to IS 8130-1984 and (Virgin) PVC insulation sheathed suitable for working ...

•

Supplying, laying and connecting LT Power cables of 1.1 KV Class from Transformers to motors and etc., complete with all leads & lifts, as per detailed specifications, drawings and directions of the E...

•

Grounding of equipments including cost of 40mm dia 2.5 mm thick, class 'C' G.I pipe of 3 metre length as per specifications, with 50x6 mm GI Flats 3 meter long, salt charcoal, including excavation cha...

•

Grounding of equipment with 50 x 6 mm G.I. Flat and connecting Equipment to the earthmat /ground pit. Each point of earthing with all formation works like bending, twisting, drilling of holes and conn...

•

Supplying, erecting, testing & commissioning of ON-LINE UPS system suitable for operation on 230V, 50Hz, A/C supply, with isolation transformer all accessories complete and excluding batteries and wir...

•

Supplying, erecting, testing & commissioning of 12V 150 AH batteries in poly propylene container, low maintenance batteries, plate type etc., complete with all leads & lifts, as per detailed specifica...

•

PUMP HOUSE LIGHTING

•

Concealed Conduit System

•

Supplying heavy gauge PVC conduit pipe 25mm dia 2mm thick confirming to IS 2509 with suitable size bends, metal/PVC junction boxes, adhesive paste etc., and running before con...

•

Supplying heavy gauge PVC Conduit Pipe 25mm Dia 2mm thick with suitable size bends, metal junction boxes adhesive paste etc., by groove cutting in the wall and fixing by bracing U or J hooks and cemen...

•

Supplying and drawing Flexible Multicore Cable manufactured with electrolytic grade flexible copper with low conductor confirming to IS:8130-1984 and (Virgin) PVC insulation sheathed suitable for work...

•

Point wiring using Copper wire with switch.

•

Supplying and wiring adopting loop system in existing PVC Conduit /casing capping using 2x1.5mm2 (Phase & Neutral) & 1x1.0 mm2 (Earth wire) FRLS multi stran...

•

Point wiring using Copper wire with switch. Supplying and wiring adopting loop system in existing PVC Conduit /casing capping using 2x1.5mm2 (Phase & Neutral) & 1x1.0 mm2 (Earth wire) FRLS multi stran...

•

Point wiring using Copper wire with switch.

•

Supplying and wiring adopting loop system in existing PVC Conduit /casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLS multi str...

•

Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking ca...

•

Supplying and fixing regular MCB distribution boards on wall / wood board / flush mounting using required clamps, bolts, nuts etc., with provision for fixing suitable type capacity MCB's single phase ...

•

Supplying of 1440rpm heavy duty exhaust fan with bracket blades suitable to operate on 230V 50Hz, AC Supply complete. 12" Sweep (300mm) etc., complete with all leads & lifts, as per detailed specifica...

•

Fixing one exhaust fan after making a suitable nitch in the wall and finishing with cement mortar and colouring to match the existing wall or brackets, with bolts and nuts and a 5 amps, ceiling rose w...

•

Supply of round/square recess/surface mounted rollingtype LED Down light with 10-12W GU 10 LED Lamp Rib Fabricated from Die cast aluminium with white powder coated prewired to mains connector & has sw...

•

Supplying and fixing of slim patty fitting, made out of CRCA Sheet metal body with locking type holder completely wired. Excluding Ballast & Flouresent Tube.1 x 4' Tube light fitting etc., complete wi...

•

Supplying and fixing/replacing of 6/16/32Amps electrical accessories on existing switch board. Electronic stepped regulator etc., complete with all leads & lifts, as per detailed specifications, drawi...

•

Supplying capacitor type ceiling fan complete with down rod blades, shackle, canopies etc., for operation on 230 volts, 50 cycles. Single phase AC supply conforming to ISS-374- 1979 and with double ba...

•

Fixing a ceiling / wall mounting fan of all capacities and all types, with necessary clamps and 'S' hook made out of 15mm dia MS rod, with 5 amps. ceiling rose of approved quality with necessary lengt...

•

Supplying and Fixing 32mm dia class A GI pipe bracket up to 2.7 meters long terminated with a reducing collar of 40x25mm to which extra pipe of 175mm length is fixed for fixing LED street light fittin...

•

Fabricating supplying and mounting MS box made out 18SWG suitable for floor / wall mounting, fully weather proof with provision for better heat dissipation, provided with hinged front cover, equipped ...

•

Supplying 4mm thick plastic sheet with necessary nitchesfor fixing switches, regulators etc., and fixing on existing wooden or metal box using N.F. screws etc., complete with all leads & lifts, as per...

•

Supplying 6A flush type socket and 6 amps flush type SP switch either surface/flush mounting in existing gang box or in 4mm thick plastic sheet and fixing over a flush mounted wooden box and wiring us...

•

Supply of LED Streetlight luminaire with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of anti glare clear diffuser with Injection moulded polyc...

•

11KV ELECTRICAL SUBSTATION

•

Providing & fixing Double Pole Structure complete including 5 Kg, 8 SWG GI Wire for Structure Grounding etc., complete with all leads & lifts, as per detailed specifications, drawings and directions o...

•

Providing & fixing Lightning Arrestor 9 kV, 5 kA Polymeric Type with Ground disconnector etc., complete with all leads & lifts, as per detailed specifications, drawings and directions of the Engineer-...

•

Providing & fixing Isolators 11 kV, 400 Amps Double Break GOSetc., complete with all leads & lifts, as per detailed specifications, drawings and directions of the Engineer-in-Charge. (Relevant IS Spec...

•

Providing & fixing H - Frame Set for fixing 11 kV, 200 Amps Single Break GOS - (For DP structure for providing New GOS for sectionalisation) - MS etc., complete with all leads & lifts, as per detailed...

•

Providing & fixing 11KV DOLO Cut Out as per IS-9385, Conventional to etc., complete with all leads & lifts, as per detailed specifications, drawings and directions of the Engineer-in-Charge. (Relevant...

•

Providing & fixing Metering Cubicle equipment details

•

11 kV HT Metering cubicle of different CT Ratio, Both side cable entry type with 3 CT & 3 PT, With Transparent Cover TTB, with 30x8 mm Copper Busb...

•

Providing & fixing 11 kV, 3 Core, XPLE HTUG Cable with pressure extruded inner sheeth, ROUND WIRE ARMOURED as per IS-7098 (Part-2) Armouring wires dia and Resistivity as per IS-3975 240 Sqmm, (55 GI W...

•

Providing & fixing 11 kV, Jointing & Cable Termination Kit Heat Shrinkable outdoor Type Cable Termination Kit for XLPE Cable 3x240 Sqmm etc., complete with all leads & lifts, as per detailed specifica...

•

Providing & fixing Aluminium End Terminal (Lug) 240 Sqmm etc., complete with all leads & lifts, as per detailed specifications, drawings and directions of the Engineer-in-Charge. (Relevant IS Specific...

•

Providing & fixing Conventional RMU (VCB Type) with Copper

•

Busbar, 350 MVA, 630 Amps etc., complete with all leads & lifts, as per detailed specifications, drawings and directions of the Engineer-in-C...

•

Providing & fixing Testing & Commissioning

•

For first 11 kV Panel Outdoor type/Kiosk etc., complete with all leads & lifts, as per detailed specifications, drawings and directions of the Engineer-in-Ch...

•

Providing & fixing 250 kVA, 11 kV/433 V, 3 phase Delta Star, Dyn11 : Supply of Auxiliary Transformer with copper windings & oil, cable termination type on both HT & LT outdoor etc., complete with all ...

•

Providing & fixing Erection of Transformers etc., complete with all leads & lifts, as per detailed specifications, drawings and directions of the Engineer-in-Charge. (Relevant IS Specifications)

•

Providing & fixing Grounding mat and equipment earthing at Receiving End side etc., complete with all leads & lifts, as per detailed specifications, drawings and directions of the Engineer-in-Charge. ...

•

Providing & fixing 25mm dia M.S.rod 1.05 Mtr. Long earthmat spikes including heating, bending top 50mm over lap flattening and making spike edge at one end driving into the earth below the ground leve...

•

Providing & fixing Grounding of equipment with 50 x 6mm G.I. Flat and connecting Equipment to the earthmat/ground pit. Each point of earthing with all formation works like bending, twisting, drilling ...

•

Providing & fixing Grounding of equipments by providing cast iron pipe of 100 mm ID 13 mm thickness, 2.75 metres long with 2 part clamp out of G.I. Flat 50 X 6 mm continuously welded alround the pipe ...

•

Supplying & Providing 450 mm dia 450 mm height 1.5"" to 2"" thick hume pipe collar (non pressure type) for earth pits including etc., complete with all leads & lifts, as per detailed specifications, d...

•

Providing & fixing Spreading of Jelly: Supplying and spreading 100mm thick with 20/25mm jelly with all lead and lifts.Note : Only 20/25 mm jelly shall be used etc., complete with all leads & lifts, as...

•

Providing & fixing Foam type extinguisher 9.0 Litre Capacity etc., complete with all leads & lifts, as per detailed specifications, drawings and directions of the Engineer-in-Charge. (Relevant IS Spec...

•

Providing & fixing Carbon dioxide type 4.5 kg. capacity etc., complete with all leads & lifts, as per detailed specifications, drawings and directions of the Engineer-in-Charge. (Relevant IS Specifica...

•

Providing & fixingDry Chemical powder type 4.5 kg Capacity etc., complete with all leads & lifts, as per detailed specifications, drawings and directions of the Engineer-in-Charge. (Relevant IS Specif...

•

Providing & fixing Sand type etc., complete with all leads & lifts, as per detailed specifications, drawings and directions of the Engineer-in-Charge. (Relevant IS Specifications)

•

i) G.I.Bucket 9 Ltr....

•

Providing & fixing Sand type etc., complete with all leads & lifts, as per detailed specifications, drawings and directions of the Engineer-in-Charge. (Relevant IS Specifications) ii) Steel stand

•

Providing and fixing RCC precast fencing pole of size 0.15mx0.15mx2.0m casted in M 20 with 20mm down size aggregates making holes for drawing barbed wire at 30 cm c/c using 8 mm dia vertical 4 TMT ste...

•

Providing and fixing G.I. chain link fabric fencing of required width in mesh size 50x50 mm including strengthening with 2 mm dia wire or nuts, bolts and washers as required etc., complete with all le...

•

Providing & fixing Station Yard Lightning RCC Pole - 9 Mtr Long, 145 Kg WL etc., complete with all leads & lifts, as per detailed specifications, drawings and directions of the Engineer-in-Charge. (Re...

•

Supplying and drawing Flexible Multicore Cable manufactured with electrolytic grade flexible copper with low conductor confirming to IS 8130-1984 and (Virgin) PVC insulation sheathed suitable for work...

•

Supplying and Fixing of 32mm dia class A GI pipe bracket up to 2 Mtrs long bent at suitable angle and fixing to this bracket 1x40/2x40 watts fluorescent tube street light fitting of all capacities to ...

•

Earth work excavation by manual means for drains,canals, waste weir, draft, approach channels, key trenches, foundation of bridges and such simillar works in all kinds of soils , as per drawing and te...

•

Earth work excavation by manual means for drains,canals, waste weir draft, approach channels, key trench, foundation of Bridges and such similar works, as per drawing and technical specifications, inc...

•

Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS...

•

Providing and laying in position Reinforced cement concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 ...

•

Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tyin...

•

Providing and constructing contraction joints by fixing 230 mm wide central bulb type PVC water stop in single line supported by 10 mm central bulb type PVC water stop in single line supported by 10 m...

•

Available rubble stone/boulder filling between or behind abutment/below apron including cost of labour, hand packing, finishing top surface & all necessary works as directed and etc., complete with al...

•

CONSTRUCTION OF INTAKE PIPE

•

Earth work excavation for pipeline trenches in all kinds of soils by mechanical means above 600 mm trench width as per drawing and technical specifications, including setting out, construction of shor...

•

Supplying S&S RCC SPUN / VIBRATED CAST PIPES (REINFORCED) pipes NP-3 Class conforming to IS:458-1988 with latest amentments using ordinary portland cement, for sanitary works and conveying to work sit...

•

Refilling available earth around trenches/pipelines, cables in layers not exceeding 20 cms in depth, compacting each deposited layer by ramming after watering with a lead upto 50 m , and lift upto 1.5...

•

JACKWELL CUM PUMP HOUSE

•

Providing and fixing 25 mm dia 2.50 m long cold twisted defomed steel anchor rod with 1.25 m length driven into 38 mm dia hole drilled in bed rock and remaining length embedded in concrete / masonry i...

•

Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The ...

•

Providing and fixing Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel et...

•

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by r...

•

Providing and constructing dry rubble stone pitching with pin headers at 2 per m2 using stones and stone chips from approved source including cost of all materials, labour, hand packing / wedging ston...

•

Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on spec...

•

Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of...

•

Providing and fixing MS ladder between landings, 45 cms wide using angle iron of specified sizes, 20mm MS bars at 25 cms. centre to centre,with necessary supports of same angle iron etc. as directed, ...

•

Design, fabrication, supply, erection and commissioning of embedded parts consisting of liners for trash rack grooves ( for coarse and fine screens ) with all accessories for pump house intake structu...

•

Design, fabrication, supply, erection and commissioning of trash racks consisting of a number of panels of suitable height with vertical trash bars welded to structural steel frame at wider interval a...

•

Providing 12 mm cement plaster finished with a floating coat of neat cement of mix :1:3 (1 cement: 3 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, prov...

•

Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade :New work (two coats) over and including water thinnable priming coat with cement primer after th...

•

Finishing walls with water proofing cement paint of required shade :New work (Two coats applied @ 4.84 kg/10 m²) to give an even shade after thoroughly brooming the surface to remove all dirt, dust, ...

•

Painting on G.S. sheet with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :New work (two coats) including a coat of approved steel primer but exclud...

•

Providing and laying water proofing treatment to the Roof with PU based single component elastomeric pure polyurethane based coating on New terrace/Chajjas/Sunken portion of WC:Bathroom, cold applied ...

•

Earth work excavation for pipeline trenches in all kinds of soils by mechanical means as per drawing and technical specifications, including setting out, construction of shoring, strutting, barricadin...

•

Earth work excavation for pipeline trenches by mechanical means as per drawing and technical specifications, including setting out, construction of shoring, strutting, barricading, caution lights, bra...

•

Providing, laying, Providing jointing materials, jointing and testing but excluding excavation and back filling etc. for Oriented Poly vinyl chloride Pipes or O PVC Pipes of highest Orientation Class ...

•

Supply and fixing of Single / Double chamber triple function tamper proof (Both the orifces to be housed in the single chamber) Air valves with Body and cover in Ductile cast iron of grade GGG 40/50. ...

•

Providing and fixing DI Resilient seated soft sealing SLUICE VALVE of variouis dia. with body bonnet of ductile iron (DI) conforming to IS 1865 and of grade GGG 40/50, shaft of stainless steel, wedge ...

•

CONSTRUCTION OF VALVE CHAMBER

•

Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. T...

•

CONSTRUCTION OF THRUST BLOCK

•

SINGLE CIRCUIT 11 KV, 3 PHASE POWER LINE ON 9 MTR SUPPORTS WITH AN AVERAGE SPAN OF 50 MTR USING RABBIT ACSR CONDUCTOR

•

Providing & fixing RCC Pole - 9 Mtr Long, 145 kg WL etc., complete with all leads & lifts, as per detailed specifications, drawings and directions of the Engineer-in-Charge. (Relevant IS Specification...

•

Providing & fixing PSCC Pole - 9 Mtr Long, 200 kg WL etc., complete with all leads & lifts, as per detailed specifications, drawings and directions of the Engineer-in-Charge. (Relevant IS Specificatio...

•

Providing & fixing 11kV, Horizontal cross arm with clamps, HTST supports, bolts, nuts and washers for RCC Pole - 9 Mtr Long, 145 kg WL etc., complete with all leads & lifts, as per detailed specificat...

•

Providing & fixing 11kV, Horizontal cross arm with clamps, HTST supports, bolts, nuts and washers for PSCC pole - 9 Mtr Long, 200 kg WL etc., complete with all leads & lifts, as per detailed specifica...

•

Providing & fixing DP Structure with 9 Mtr RCC Pole - 9 Mtr Long, 145 kg WL etc., complete with all leads & lifts, as per detailed specifications, drawings and directions of the Engineer-in-Charge. (R...

•

Providing & fixing 11 kV, 5 KN Polymeric Pin Insulator (24 mm Long FRP Rod) etc., complete with all leads & lifts, as per detailed specifications, drawings and directions of the Engineer-in-Charge. (R...

•

Providing & fixing 11kV 45kN Polymeric Insulator etc., complete with all leads & lifts, as per detailed specifications, drawings and directions of the Engineer-in-Charge. (Relevant IS Specifications)

•

Providing & fixing Guy Set Complete with No. 15 strain insulator etc., complete with all leads & lifts, as per detailed specifications, drawings and directions of the Engineer-in-Charge. (Relevant IS ...

•

Providing & fixing RABBIT ACSR Conductor etc., complete with all leads & lifts, as per detailed specifications, drawings and directions of the Engineer-in-Charge. (Relevant IS Specifications)

•

Providing & fixing PG Clamps for Rabbit Conductor etc., complete with all leads & lifts, as per detailed specifications, drawings and directions of the Engineer-in-Charge. (Relevant IS Specifications)...

•

Providing & fixing Spiral Earth Electrode etc., complete with all leads & lifts, as per detailed specifications, drawings and directions of the Engineer-in-Charge. (Relevant IS Specifications)

•

Providing & fixing EG Stirrups with GI wire lacing etc., complete with all leads & lifts, as per detailed specifications, drawings and directions of the Engineer-in-Charge. (Relevant IS Specifications...

•

Providing & fixing Guy concreting with Boulders, Mud and Sand etc., complete with all leads & lifts, as per detailed specifications, drawings and directions of the Engineer-in-Charge. (Relevant IS Spe...

•

Providing & fixing Caution/Danger Board etc., complete with all leads & lifts, as per detailed specifications, drawings and directions of the Engineer-in-Charge. (Relevant IS Specifications)

•

Providing & fixing Anti Climbing Device (12 mtr GI Barbed Wire) Lump sum etc., complete with all leads & lifts, as per detailed specifications, drawings and directions of the Engineer-in-Charge. (Rele...

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

NIT Documents

Compliance.pdf

Others - Compliance • 0.85 MB

detail specification.zip

Others - detail specification • 29.02 MB

Drawings.pdf

Others - Drawings • 0.90 MB

Royalty&MDPGO.zip

Others - Royalty&MDPGO • 0.51 MB

electrical specifications.zip

Others - electrical specifications • 0.05 MB

detailed specifiaction for pvc pipe.doc

Others - detailed specifiaction for pvc pipe • 0.03 MB

dts note Beeranholi LIS.doc

Others - dts note Beeranholi LIS • 0.12 MB

Bar Chart4567.xls

Others - Bar Chart4567 • 1.04 MB

standard bid document kw-4 4567.doc

Tender Document • 3.27 MB

Ready to Participate?

Download all tender documents and submit your bid

Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .

Loading…

Tender ID

Karnataka

Retender

Works

Lift Irrigation Scheme

Filling of Biranaholi Tanks from Ghataprabha river Through Lift Irrigation Scheme in Belagavi Tq Dist Belagavi (4702/2024-25)

Minor Irrigation Department

Minor Irrigation Division Belgaum | Karnataka

Amount: ₹3.4 CrCloses: 24 Feb 2025Closed

Tenderkart AI

Reads all tender documents

Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.

Timeline

Published15 Feb 2025
Closed24 Feb 2025
Retendered15 Feb 2025

Cancellation Details

Retendered

RetenderedRetenderedReason: Retendered

Published 15 Feb 2025

Tender Value

₹3.4 Cr

EMD Value

₹5.1 L

Closing Date

24 Feb 2025, 9:30 pmClosed

Tender Inviting Authority

Office Inviting Bids

Minor Irrigation Department

Contact Person

Mahadev B

Office Number

Work Description

Filling of Biranaholi Tanks from Ghataprabha river Through Lift Irrigation Scheme in Belagavi Tq Dist Belagavi (4702/2024-25)

Tender Information

Tender ID

MI/2024-25/LI/WORK_INDENT4567

Reference Number

MI/2024-25/LI/WORK_INDENT4567

Tender Type

Open

Product Category

Lift Irrigation Scheme

Form of Contract

Two Tender Document System(Two Cover)

Location

Minor Irrigation Division Belgaum

Source Website

Subscribe to view

Documents Required

12 documents required · 12 mandatory

Technical Bid

RequiredAnnual Turnover Certificate

RequiredContractor Registration Certificate

RequiredWork done certificate

RequiredWork done certificate showing quantities of different items executed

RequiredMachineryPurchase Invoice / second sale agreement

RequiredLine of Credit

RequiredTurnover & work in hand

RequiredGST Registration Certificate

RequiredPAN & TAN Certificate

RequiredScanned signature of the bidder/representative to be attached while uploading the bid document

RequiredFormats as per Section 3, Qualification Information

RequiredThe tenderer shall also disclose if there are any bankruptcy proceedings against him.

Eligibility Criteria

Tenders from Joint ventures are not acceptable.

Bidders shall not be under a declaration of ineligibility for corrupt and fraudulent practices issued by Government of Karnataka

Bidders shall ensure upload of relevant document certifying his/her status as Scheduled Caste/ Scheduled Tribe/other reserved category as prescribed in the tender document.

EMD Payments through e-Payment mode shall be made as one single transaction and payments made in part are liable for rejection.

The Tender are invited as per Standard Tender bid document KW-4

Conditional Tenders will not be considered

All relevant documents as per the KW-4 need to be uploaded while submitting bid in general documents provision in KPPP portal.

The Employer reserves the right to accept or reject any of the tender without assigning any reason

All the documents required as per technical qualification criteria needed to be uploaded in Original or Attested by any official not below the rank of Executive Engineer or Notary

Name, address, and telephone, telex, and fax numbers of the contractor is to be provided

Unique Document Identification Number (UDIN) from Practicing Chartered Accountant is preferred in Annual Turn over

The tenderer shall also disclose if there are any bankruptcy proceedings against him

A copy of GST registration certificate should be uploaded

If the GST rates are revised during the contract period, payment will be made/withdrawn accordingly

ii. Method of Bidding a.If the bid is made by an individual the bid documents shall be signed by the individual with his full name and current address.

b.Items of work done with approximate quantities.

c.Machinery and vehicles employed during the month with respective RC numbers and period of usage (days, hours)

d.Daily labour reports

Technical Criteria

General

Minimum financial turnover (civil engineering construction works) not less than two times the annual payments from this contract (Rs. xxxxx Lakhs)

Satisfactoriy completed (atleast 90%) as prime contractor at-least one such similar work of value not less than Rs. xxxxxxx (80% of estimated cost of tender)

Executed in any one year the following minimum quantities of work (Cement Concrete - xxxx cum, Earthwork - xxxx cum, etc) (80% of peak rate of construction)

Owning the following key and critical equipment for this work (xxxx, xxxx, xxxx)

Liquid assets and /or availability of credit facilities of no less than Rs. xxxxxx Lakhs (estimated cash flow for 3 months of peak construction period)

Total value of civl engineering works executed and payments received in the last five years (year-wise)

List of existing commitments and ongoing works

List of works for which tenders already submitted

Banker Details for reference

Construction equipment owned by the tenderer and equipment proposed to be deployed on this contract, if awarded

Reports on the financial standing of the tenderer, such as profit and loss statements and auditor’s reports for the last five years

Qualification and experience of the key technical and management personnel in permanent employment with the tenderer and those that are proposed to be deployed on this contract, if awarded

List of Financial Resources with Certificates

Past Experience

Work Done Certificate

Financial Status

Audited CA Certificate of Annual Turnover

Others

Others -- Machinary

b) Liquid assets and /or availability of credit facilities of no less than Rs.113.00 Lakhs (Credit lines/ letter of credit/ certificates from banks) for meeting the fund requirement etc.

Line of Credit

Fee & Financial Details

Tender Fee Amount

₹5,000

EMD Fee Amount

₹5.1 L

Important Dates

Last Activity

15 Feb 2025

Published

15 Feb 2025

Bid Opening

25 Feb 2025

Download Ends

21 Feb 2025

Pre-Bid Meeting

21 Feb 2025

BOQ Preview

•

PUMPING MACHINERY

•

PUMP HOUSE LIGHTING

•

Concealed Conduit System

•

Supplying heavy gauge PVC conduit pipe 25mm dia 2mm thick confirming to IS 2509 with suitable size bends, metal/PVC junction boxes, adhesive paste etc., and running before con...

•

Point wiring using Copper wire with switch.

•

Supplying and wiring adopting loop system in existing PVC Conduit /casing capping using 2x1.5mm2 (Phase & Neutral) & 1x1.0 mm2 (Earth wire) FRLS multi stran...

•

Point wiring using Copper wire with switch.

•

Supplying and wiring adopting loop system in existing PVC Conduit /casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLS multi str...

•

11KV ELECTRICAL SUBSTATION

•

Providing & fixing Metering Cubicle equipment details

•

11 kV HT Metering cubicle of different CT Ratio, Both side cable entry type with 3 CT & 3 PT, With Transparent Cover TTB, with 30x8 mm Copper Busb...

•

Providing & fixing Conventional RMU (VCB Type) with Copper

•

Busbar, 350 MVA, 630 Amps etc., complete with all leads & lifts, as per detailed specifications, drawings and directions of the Engineer-in-C...

•

Providing & fixing Testing & Commissioning

•

For first 11 kV Panel Outdoor type/Kiosk etc., complete with all leads & lifts, as per detailed specifications, drawings and directions of the Engineer-in-Ch...

•

Providing & fixing Erection of Transformers etc., complete with all leads & lifts, as per detailed specifications, drawings and directions of the Engineer-in-Charge. (Relevant IS Specifications)

•

Providing & fixing Sand type etc., complete with all leads & lifts, as per detailed specifications, drawings and directions of the Engineer-in-Charge. (Relevant IS Specifications)

•

i) G.I.Bucket 9 Ltr....

•

Providing & fixing Sand type etc., complete with all leads & lifts, as per detailed specifications, drawings and directions of the Engineer-in-Charge. (Relevant IS Specifications) ii) Steel stand

•

CONSTRUCTION OF INTAKE PIPE

•

JACKWELL CUM PUMP HOUSE

•

CONSTRUCTION OF VALVE CHAMBER

•

CONSTRUCTION OF THRUST BLOCK

•

SINGLE CIRCUIT 11 KV, 3 PHASE POWER LINE ON 9 MTR SUPPORTS WITH AN AVERAGE SPAN OF 50 MTR USING RABBIT ACSR CONDUCTOR

•

Providing & fixing 11kV 45kN Polymeric Insulator etc., complete with all leads & lifts, as per detailed specifications, drawings and directions of the Engineer-in-Charge. (Relevant IS Specifications)

•

Providing & fixing RABBIT ACSR Conductor etc., complete with all leads & lifts, as per detailed specifications, drawings and directions of the Engineer-in-Charge. (Relevant IS Specifications)

•

Providing & fixing Spiral Earth Electrode etc., complete with all leads & lifts, as per detailed specifications, drawings and directions of the Engineer-in-Charge. (Relevant IS Specifications)

•

Providing & fixing Caution/Danger Board etc., complete with all leads & lifts, as per detailed specifications, drawings and directions of the Engineer-in-Charge. (Relevant IS Specifications)

•

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

NIT Documents

Compliance.pdf

Others - Compliance • 0.85 MB

detail specification.zip

Others - detail specification • 29.02 MB

Drawings.pdf

Others - Drawings • 0.90 MB

Royalty&MDPGO.zip

Others - Royalty&MDPGO • 0.51 MB

electrical specifications.zip

Others - electrical specifications • 0.05 MB

detailed specifiaction for pvc pipe.doc

Others - detailed specifiaction for pvc pipe • 0.03 MB

dts note Beeranholi LIS.doc

Others - dts note Beeranholi LIS • 0.12 MB

Bar Chart4567.xls

Others - Bar Chart4567 • 1.04 MB

standard bid document kw-4 4567.doc

Tender Document • 3.27 MB

Ready to Participate?

Download all tender documents and submit your bid