Survey, design drawing, Supply, req. for const, erection, test. n comm.. of W.S. work such as CWR, Feeder main, Pump main, related E.M. work for Connection of 03 OHT (Multanagar, Khadauli n Maliyana) from Ganga Jal feeder main under NN Meerut

Design, drawing, Supply of all materials labour T&P etc. required for complete construction of R.C.C. CWR 1665 KL capacity with Pump House cum Panel Room as per direction of Engineer-in-charge. The key feature, but not limited to, pertaing to design and construction of CWR are as follows: 1. Submission of seismic proof detailed design & drawing from recognized univercity as per direction of engineer in charge. Free board should be 30 cm. 2. Soil investigation and bearing capacity with 03 nos. of bore holes. 3. Structural design and drawing confirming to IS: 456, IS: 3370, IS: 1893, IS: 875 & Other latest relevant IS Code. 4. Grade of concrete M30 for water retaining structure and concrete grade for other components shall not be less then M25. 5. RCC stair of width minimum 1m fro GL to roof of CWR. 6. Construction of Pump House cum Panel Room over CWR as per type design including suply & fixing of gentry MS Girder, pump foundation, drain & cable channels, suction pit of size 0.6x0.6m for dewatering pump set. ramp for maintenance and installation of pumps. doors & Windows as per specification & requirement. 7. Railing with 20mm dia medium class G.I.pipe (in 3 rows) on all around roof of CWR and stairs, supported on 50x50x6mm M.S. angle section, spaced at intervals not more than 1.5m. 8. Proper ventilator at top of roof in circular/ ractangular shape of 1.2 m dia / side. 9. Food Grade epoxy coating of FOSROC / Ciba-Geigy or reputed brand on inside surface area of water container after testing of water tightness, two coat of apex painting over one coat of primer of approved colour after finishing of RCC surface with grinder. 10. Repairs of pin holes, unevenness of all concrete surface. 11. Ultra Sonic Water level indicator fabricated with sensor connecting to automation. 12. Supply & fixing of SS Ladder in side the CWR / UGR from roof to the fioor in a slope of 3:1 as per direction of engineer in charge. 13. C.I. manhole of min 60x60cm size with locking arrangement. 14. Supply, fixing, jointing of D.I.D/F Pipes of appropriate size with D.I.D/F specials conforming to IS 8329/2000 pipes for inlet, outlet, overflow and washout with require sluice valves, Bell Mouth, duck foot bend, puddle pipe etc. as per latest / relevant I.S. specifications with all jointing materials for proper completion of work. 15. Supply of all materials & Construction of 1 m wide apron around CWR and 15 cm dia semi circular drain. 16. Construction of washout / overflow chamber and chambers for sluice / butter fly valves as per departmental type design and drawing. 17. Supply of PVC pipe for disposal of water from washout chamber to suitable point outside the water works compound. 18. Testing of CWR for water tightness as per specification and relevent IS code. 19. All other details of CWR not covered here shall also be as per specifications and relevant IS code. For bidding purpose, bearing capacity of soil shall be considered as 8t/sq.m. Working design shall be based on the SBC determined after soil investigation / 8 tonne/sqm. Note :- The bid price of CWR is to be submitted considering net safe allowable bearing capacity as 8 t/m2. The successful bidder will be required to investigate the soil bearing capacity. If net safe allowable bearing capacity is found to be equivalent or more than 8 t/m2, the design of CWR will be based on 8 t/m2 capacity. However, in case the net safe allowable bearing capacity is found to be below 8 t/m2, then the design of CWR / UGR will be based on the actual bearing capacity.

FEEDER MAIN

Dismantling of following type of road surface for laying of pipe line including sorting out of serviceable and unserviceable materials proper stacking of serviceable materials at suitable place and disposal of unserviceable materials at suitable place.

CC Road

Inter locking Tiles Road

Excavation of earth in ordinary soil (loam, clay or sand) to give 1 mt. Cover from top of the pipe including lift upto 1.5 mt. and lead from centre of trenches and refilling of earth in 20 cm. layers with watering and raimming etc. complete in all respect.

Supply of following pipes including cost of pipes, FOR destination, all taxes duties and insurance charges, cost of jointing materials, loading unloading, third party inspection charges, packing and forwarding charges, road transportation charges etc complete.

D.I. Pipe K-7 conforming to IS 8329 / 2000 or its latest amendment (s)

600 mm dia