Construction of GOs Mess with 5 Suites for 100 bedded CH and 2 nos deficient Suites of Bn HQ at BSF Campus Kadamtala SH Electrical Portion.

Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc. in the existing trench, complete as required. (i) 90 mm dia (OD-90 mm & ID-76 mm nominal)

Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc. in the existing trench, complete as required. (ii) 120 mm dia (OD-120 mm & ID-103 mm nominal)

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation and refilling the trench etc as required, but excluding sand cushioning and protective covering. (i) Upto 35 sq. mm

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation and refilling the trench etc as required, but excluding sand cushioning and protective covering (ii) Above 35 sq. mm and upto 95 sq. mm

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation and refilling the trench etc as required, but excluding sand cushioning and protective covering. (iii) Above 95 sq. mm and upto 185 sq. mm

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing masonry open duct as required. (i) Upto 35 sq. mm

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing masonry open duct as required. (ii) Above 35 sq. mm and upto 95 sq. mm

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing masonry open duct as required. (iii) Above 95 sq. mm and upto 185 sq. mm

Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size on wall surface as required. (i) Upto 35 sq. mm

Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size on wall surface as required. (ii) Above 35 sq. mm and upto 95 sq. mm (clamped with 25x3mm MS flat clamp)

Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size on wall surface as required. (iii) Above 95 sq. mm and upto 185 sq. mm (clamped with 25/40x3mm MS flat clamp)

Providing and making steel pole collar with cement concrete (1 cement : 3 coarse sand : 6 stone aggregate 20mm) of specified size and shape including form work, plastering if required, curing etc as required. (volume of pole/ pipe not to be deducted)

Supplying and embedding following dia G.I. pipe (medium class) in pole collar/ foundation (during casting) for cable entry including bending the pipe to the required shape complete as required. 32 mm

SITC of 800 mm X 800 mm comma depth upto 600 mm sizes water protected outdoor (Water proof) hut type compartmentalized type double door cubical panel both side opening with hinged door, locking arrangement made out of 2 mm thick CRCA sheet with required hardware duly painted with powder coated. Panel having separate detachable gland plate, angle iron base frame made out of 50mmx50mmx5mm angle iron of suitable size of the feeder pillar (minimum height 60cm), earth bar/stud, led pilot light for phase indicator (R,Y,B) on top, 400A/415V 4 strip aluminum bus bar duly PVC sleeved, connection inter–connection with 25% extra current carrying capacity busbars to MCCBs spreader links including incoming/ Outgoing cables connection where ever required, spreader terminal links for spare MCCBs, heavy duty connectors/ terminals including incoming or outgoing cable connections, provision of incoming 100 amp MCCB (But without MCCB), testing on load and marking on the panel details of location for incoming and out going distribution i/c welding, painting & grouting the legs in existing floor with 1:3:6 cement concrete foundation etc. including LED light min 5 watt with on/off switch in the panel for night work)- in each panel. (Panel should be as per design & drawing approved by Engg in charge)

SITC of 1200 mm X 1025 mm comma depth upto 600 mm sizes water protected outdoor (Water proof) hut type compartmentalized type double door cubical panel both side opening with hinged door, locking arrangement made out of 2 mm thick CRCA sheet with required hardware duly painted with powder coated. Panel having separate detachable gland plate, angle iron base frame made out of 50mmx50mmx5mm angle iron of suitable size of the feeder pillar (minimum height 60cm), earth bar/stud, led pilot light for phase indicator (R,Y,B) on top, 400A/415V 4 strip aluminum bus bar duly PVC sleeved, connection inter–connection with 25% extra current carrying capacity busbars to MCCBs spreader links including incoming/ Outgoing cables connection where ever required, spreader terminal links for spare MCCBs, heavy duty connectors/ terminals including incoming or outgoing cable connections, provision of incoming 200 amp MCCB (But without MCCB), testing on load and marking on the panel details of location for incoming and out going distribution i/c welding, painting & grouting the legs in existing floor with 1:3:6 cement concrete foundation etc. LED light min 5 watt with on/off switch in the panel for night work)- 01 No in each Panel. (Panel should be as per design & drawing approved by Engg in charge)

SITC of outdoor type 5 Nos joint boxes made of 2 mm thick CRCA sheet of desired size with 450 mm depth suitable for 415 volt, 3 phase 50 hz power supply complete with hinged doors, having locking arrangement and providing detachable gland plate of thickness 3 mm at the bottom, earth bar/stud, cable alley, aluminium busbar of suitable as per CPWD norms as required. All sheet metal parts separately chemically treated with 7 tank treatment process and the panel shall be finished with powder coating in simens Grey shade RAL 7032 and supplied with pedastal frame with 4 Nos 600 mm long legs with suitable apron all round. The panel shall be embeded in 1:3:6 cement concrete foundation of required shape and dize 30 cms below ground level including finishing etc as required as per direction of engg-in-charge. (Make of panel CPRI approvel only). (Panel should be as per design & drawing approved by Engg in charge)

Providing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade (as per IS 7098 (part-I) 1988 with upto date amendments) alluminium conductor armoured power cable of following size as required. (Make Havells/ KEI/ Polycab) (i) 3x25 sqmm

Providing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade (as per IS 7098 (part-I) 1988 with upto date amendments) alluminium conductor armoured power cable of following size as required. (ii) 3x16 sqmm

Providing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade (as per IS 7098 (part-I) 1988 with upto date amendments) alluminium conductor armoured power cable of following size as required. (iii) 3.5 X 95 Sqmm

Providing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade (as per IS 7098 (part-I) 1988 with upto date amendments) alluminium conductor armoured power cable of following size as required. (iv) 3.5 X 185 Sqmm

Providing and installation of 45 watt decorative post top for 360 degree indirect light with IP65 protection with pressure die cast aluminium make Havells / CG / Phillips compatable to Crompton Maple LED post top fittings, complete with all accesories dirctly on errected GI pipe including connection etc. as required.

Providing and installation of 10 watt, LED Bollard light on existing base, min IP65 rated or higher (dust-tight & waterproof), 360 degree light distribution, Ground mounted with anchor Bolt, 100-240V AC, 50/60 Hz, surge protection minimum 2.5 kv, operating temperature -10°C to 50+ °C, warranty 2-5 year etc complete as required by engg-in-charge (make Crompton/ Philips/Orient/Havells)

Supplying and Erection of Decorative Steel poles 3.0 mtr made out of GI Pipe with lower portion of pole made of MS. The poles have diameter 60mm to 90mm at the top. Base is made of 8mm/ 12mm thick MS sheet with holes suitable for 16mm foundation bolt. The base is so designated that the foundation bolts are not visible i/c excavation and refiling . The pole are painted with multiple coat of weather resistant polyurethane paint. The service window of at the lower part of the pole contains connector, cut-outs , MCB with 5-10 Amp single pole MCB carrier plate including wiring of existing pole with 3x 1.5 sqmm ( 3 Core ) FR-LSH PVC insulated copper conductor three core cable from MCB to LED light fittings including connections, inter connection as per specification complete as per required (Make Crompton/ Bajaj/ Utkarsh compatible to Crompton make model Candleya).

Providing and fixing of hot pressure moduled SMC junction box with hinged type door, approx inner dimention 250 x 250 x 155 (in mm), including one 6-30 amp SPN MCB mounted inside box, Distribution metering cubicle (DMC) standard connection plate for incoming and outgoing cable connection, MS clamp of suitable size with nut bolt for mounting to any light pole, driling/ bending/ penting etc complete as required by engg-in-charge.

Supplying and fixing of 100 watt LED flood light fitting having minimum system efficacy of 100 Lumen / Watt LED, PF not less than 0.90, Flood Light Luminaire of IP 65 and above having suitable pressure die cast housing / heat sink for operation on 230 Volt 50 Hz AC supply complete with electronic driver & all accessories etc as required. (Crompton/ Havells/ Philips/ Bajaj/Orient make)

Please Enable Macros to View BoQ information