SPL REPAIR TO OFFICE and STORE ROOMS OF BLDG No. P-602, P-301 and P-302 AND SPL REPAIR TO ROOF TREATMENT TO BLDG No. P-2A, P-21, MI ROOM and MAIN RATION STORE AND PROVN OF ROAD SAFETY FURNITURE UNDER ZONE-I AREA AT JAIPUR MIL STN

Amount

B/R Portion Taking down cement plaster on brick or stone walls, ceiling incl.raking out joints hacking for key scrubbing down with water complete all as specified and directed

Demolition of brickwork or stone/boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc but excluding ashlar facings, dressed stonework and precast concrete articles.

M&L for brick work with sub-class 'B' bricks (ols size), straight or curved on plan exc 6m mean radius built in In cement mortar 1:6 complete all as specified and directed

,--ditto---all as per item No 3 herein before but except bricks complete all as specified and directed

M & L Brick work with sub-class `B' bricks straight or curved on plan to any radius in half brick thick walls built in CM 1:4 complete all as specified and directed

M&L Walling of random rubble, brought up to a course, well bonded, bedded and solidly hearted built in CM 1:6 complete all as specified and as directed.

M&L rendering 15 mm thick in two layer, Ist layer 10 mm thick in CM 1:6 and IInd layer 5 mm thick in CM 1:4 on stone masonry surfaces or surface other than fair faces of brick masonry finished even and smooth witout using extra cement complete all as specified and directed.

M&L 15mm thick rendering in CM 1:4 on stone masonry wall surfaces or on other than fair faces of brick work surfaces finished fair & even etc complete all as specified and directed.

M&L rendering 5 mm thick in CM 1:3 as on concerete surface on ceilings finished even and smooth without using extra cement complete all as specified and directed .

M & L rendering 15mm thick on fair faces of brick work or concrete surface in CM 1:4 finished even and smooth without using extra cement complete all as specified and directed .

M&L Dubbing out average 10 mm thick on irregular face of walls floating/ setting coat in CM 1:4 all as specified and as directed

M & L for preparation of new plastered wall surfaces and applying two coat of distemper with distemper oil emulsion (Ist quality) of approved tint by mechanical means over and including a coat of primer with alkali resistant priming paint complete all as specified and directed .

M&L for complete removal of existing treatment on old plastered surfaces of wall and applying two coats of distemper with distemper oil emulsion white or tinted by mechanical means over a coat of primer complete all as specified and directed.

M&Lfor Preparation of new plastered surfaces of walls and applying two coats of exterior emulsion paint (Ist quality) by hand roller over a coat of primer over 1mm thick wall care putty complete all as specified and directed.

M&L for complete removal of exiting surface & thourughly wetted surface to ensure better sticking including sand paper gentle rubbing to obtain smmoth surfaces, including all necessary arrangement for execution of work and applying two coats of exterior emulsion paint (Ist quality) using hand roller over one coat of water based white pigmented akali resistant priming paint for external wall complete all as specified and as directed by Engineer-in-Charge.

M&L or preparation of old painted steel surfaces of any description not otherwise described over 10cm in width or girth and applying one coat of synthetic enamel paint (Ist quality) complete all as specified and directed.

M & L for preparation of new plastered or unplastered surfaces of ceiling and applying three coat of white wash complete all as specified and directed.

M&L preparation of old decorated surfaces of ceiling and applying two coat of white wash on ceiling surfaces complete all as specified & as directed.

M&L for preparation of old painted wooden surface of any description over 10cm in width or girth and applying one coat of synthetic enamel paint (Ist quality) of approved tint complete all as specified & as directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified & as directed.

M&L for light shade full body vitrified matching tiles 10mm thick (square / rectangular) area of each tile n exc 0.36 sqm in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade over and including 15 mm thick screed bed in CM 1:6 complete all as specified and directed

M&L for light shade full body vitrified matching tiles 10mm thick (square / rectangular) area of each tile n exc 0.36 sqm on vertical surfaces of wall such as dado, skirting etc set and jointed in neat cement slurry and pointed in coloured cement to match the shade of tiles over and including 10mm thick backing coat in CM 1:4 complete all as specified and directed

M&L coloured Glazed ceramic tiles (300x450 x 7mm thick), on vertical surfaces of wall such as dado, skirting etc set and jointed in neat cement slurry and pointed in coloured cement to match the shade of tiles over and including 10mm thick backing coat in CM 1:4 complete all as specified and directed

M&L Non- skid coloured ceramic matching tiles 7 to 8mm thick (square / rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm in floor set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade over and including 15 mm thick screed bed in CM 1:6 complete all as specified and directed

M&L for granite (of any type), 16mm to 18mm work (table rubbed and polished) in steps, jamps, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed

M & L machine cut kota stone slab flooring 20-25mm thick, size of kota stone 450x450 mm over and including cement screed bed 20mm thick in CM 1:6 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete

M & L machine cut kota stone slab flooring 20-25mm thick, in single pieces as in stair over and including cement screed bed 20mm thick in CM 1:6 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete

Dismantling wrought iron or mild steel, including gates work of any description not otherwise provided for complete all as specified and directed.

S&F rolled mild steel work as in Joist, channel, angle or tee sections, hollow section fixed independently, without connecting plates, etc. (cut to ordinary lenghts i.e. within 20mm of the lenght directed) and similar work conforming to Fe-410W GdeE-250 quality A complete all as specified and directed

M&L mild steel framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering,running rails and guides) and hanging; also fastening and fixing conforming to Fe 410-W (Gde- E- 250) quality A complete all as specified and directed.

S & F Rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors ; fixed with angle cleats or other connecting plates of grade Fe-410-W (Gde E-250 ) quality A complete all as specified.

M&L pre- painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550Mpa as in roof covering / cladding to wall, fixed with self tapping screws complete all as specified and directed .

Dismantling plain or corrugated steel / FRP sheeting any gauge, thickness including nainital or similar pattern roof /wall covering complete all as specified and directed .

M&L preparation of new steel surface of any description over 10cm in width or girth, not otherwise described and applying two coats of synthetic enamel paint (Ist quality) over a coat of red oxide primer complete all as specified and as directed.

M&L preparation of new steel surface of any description n exc 10cm in width or girth when un connecting to other painting surface and applying two coats of synthetic enamel paint (Ist quality) over a coat of red oxide primer complete all as specified and as directed.

Demolition existing water proofing treatment including PCC in roof covering/padding kerbs, roof kerbs, benching, coved fillets etc including old decayed water proofing treatment of any type upto mother slab of roof complete as specified and directed.

M&L for surface preparation by removal of all loose particle to ensure clean, smooth and dry surface and laying average 40mm thick PCC 1:2:4, type B-0 (using 12.5 mm graded stone aggregate) finished even & fair to cover negative slope in to prop complete as specified and directed

M&L screed plaster 10mm thick in cement mortar (1:4) on concrete surfaces of roof to receive water proofing treatment and finished the surface even and fair incl mixing of WPC as per manufacturers instruction complete all as specified and directed. Note:- water proofing compound measured and paid seperately as supply only

Supply only integral water proofing compound ISI marked complete all as specified and directed.

M&L opening all visible cracks in V shape, cleaning properly with wire brushes, washed and filled with PU & cement (1:1.5) by volume grouting by nozzles by authenticated applicators carefully as per manufacturers instruction complete all as specified and directed.

Supplying & applying fiber reinforced elastomeric liquid water proofing coating with acrilic polymers and polyester /glass fibre with roller both direction with a gap of 12 hrs as per manufacturers instruction over a primer coat after brooming the surface as per manufacturers instructions complete all as specified and directed by engineer In-charge. Note : (i) Work shall be carried out through authorized applicator only and contractor shall submit MoU with authorized applicator of manufacturer before execution of work and (ii) Material shall be used as per technical data / instruction of manufacturer after written approval of garrison engineer before execution at site including guarantee of roof treatment work for TEN years (iii) Material incorporated in the work shall be calculated as per site and full quantity of material shall be brought at site in one time before commenement of waterproofing work. (Make:- Asian Paint (smart care damp proof), M/s STP LTD- Shalicry MHI, M/S Sika Cool Coat , Berger Homeshield Dampstop or equivalent as approved by GE

M & L for 75mm thick PCC 1:3:6 , type C-2 using 40 mm graded stone aggregate as in plinth protection laid in slope in 1:30 in alternative bays not exceeding 3 mtr in length. Exposed surfaces finished even and smooth without using extra cement including raking out joints between panel to panel and panel to wall and plugging the same with bitumen mastic using bitumen and sand mixture in 1:3 complete all as specified and directed.

M&L providing cement concrete 1:2:4 type B1 (using 20 mm graded stone agg) as in lintel up to 1.5 mtr clear span, cills,steps,seismic and other similar bands, plinth course, string course, lacing course, parapets and railing up to 60cm in height, coping, kneelers, apex stones, bed plates kerb, water troughs and the like including weathering, slightly rounded or chamfered angles and throating complete all as specified and directed.

Demolition stone slabs and tiles of any description or thickness in floors, aprons etc laid, bedded and pointed in cement mortar complete all as specified and as directed.

M&L for 100mm thick plain cement concrete 1:4:8, type D-2 using 40mm graded stone aggregate as in sub base to flooring complete all as specified and directed.

M&L sand filling under floors or in foundations including watering, spreading and levelling in layers of 25 mm thick complete all as specified and as directed.

M & L rubber moulded machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60mm thickness, M-35 Grade, with grey cement & no pigment laid over 25mm thick sand cushion layer complete all as specified and as directed. Note : Sand cushion shall be measured and paid seperately

M & L rubber moulded machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60mm thickness, M-35 Grade, with coloured cement and pigment laid over 25mm thick sand cushion layer complete all as specified and as directed. Note : Sand cushion shall be measured and paid seperately

M&L for precast concrete kerb stones of cement concrete type C1 1:3:6 (using 20mm graded stone aggregate) solid blocks, exc 10 cm in width and setting in cement mortar 1:4 complete all as specified and as directed.

S&F factory made steel window with side hung shutters including box/projecting type hinges with steel handle and steel peg stay complete with glazing bars devetailed or welded incl inserting the holdfast in stone / brick masonay and make good the distrubed portion complete all as specified and as directed.

S & F factory made steel window with side hung shutters including box/projecting type hinges with steel handle and steel peg stay complete without glazing bars devetailed or welded incl inserting the holdfast in stone/brick masonay and make good the distrubed portion all as specified and as directed.

Supply only 3mm thick plain sheet glass ordinary quality and glazing with oil putty in sqaures not exc 0.5 sqm in each pane complete as directed and specified.

Taking down shutters of any description of area exc 1 sqm but n exc 2sqm each complete all as specified and directed.

Taking down chowkats or frames not exceeding 1.5 Sqm each with shutter (without taking off shutter from the frame) and removing from site complete all as specified and directed.

Taking down chowkats or frames exceeding 1.5 Sqm but not exceeding 4 Sqm each with shutter (without taking off shutter from the frame) and removing from site complete all as specified and directed.

Taking down shutter of any description exc. 1 sqm but n.exc 2 sqm each and Refixing in same position including Resecuring or easing & adjusting complete all as specified and directed by Engineer-in-Charge.

S&F mild steel framed work such as grills, gratings, etc. with ends of bars shouldered and / or riveted or forged into spikes framed guard bars; barred iron doors; ladders; framed balusters; walk ways;drainage crossings, railings, framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and as directed

S & F 35mm thick factory made plain, framed, paneled door shutters kiln seasoned and chemically pressure treated second class, hardwood (two panels) with lock rail and panel of 9mm thick BWP commercial marine grade ply wood bonded with high quality liquid phenol formal dehyde synthetic resin adhesive confirming to IS-710. The size of rails and style shall be as per IS-1003 complete all as specified and as directed

S & F for Factory made Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing given in SSR Part – II complete all as specified and directed.

S&F Factory made solid panel pvc door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded plain colour PVC `C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S frame wedded/ sealed to the stiles, & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing given in SSR Part – II complete all as specified and directed.

S & F 300mm long mild steel sliding door bolt clip type stove enamelled black with bright bolt not less than 12mm dia with & including a min of six bolt & nut, four on bolt plate & two on staple plate complete all as specified and directed.

S & F 150mm long mild steel pressed handles oval type stove enamelled black complete all as specified and directed.

S & F 125mm long aluminium handles, cast type anodised complete all as specified and directed.

S & F 150mm long mild steel barrel tower bolt stove enamelled black with bright bolt and fixed complete all as specified and directed.

S & F 125mm long aluminium anodised barrel tower bolts of extruded section and fixed complete all as specified and directed.

S & F 100mm butt hinges medium weight cold rolled mild steel and fixed complete all as specified and directed.

Dismantling old unserviceable RCC / PVC water tank of capacity exc 250 ltr but n exc 500 ltr & removal from site complete all as specified and directed

Dismantling old unserviceable RCC / PVC water tank of capacity exc 500 ltr but n exc 1000 ltr & removal from site complete all as specified and directed

S & F 500 Ltrs capacity rotational moulded polyethylene water storage tanks double layered (cylindrical vertical with closed top) hoisted and fixed in position & making necessary arrangements for fixing inlet, outlet & over flow pipe pipe etc complete all as specified in SSR Part I complete all as specified and directed.

S & F 1000 Ltrs capacity rotational moulded polyethylene water storage tanks double layered (cylindrical vertical with closed top) hoisted and fixed in position & making necessary arrangements for fixing inlet, outlet & over flow pipe pipe etc complete all as specified in SSR Part I complete all as specified and directed.

S&F ball valve high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe 20 mm dia and fixed (Minimum Weight 210 gms) complete all as specified & as directed.

S&F in repair Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed 20 mm bore Complete all as specified and as directed.

S&F Tank Connection 25 mm size for fixing the Tanks to existing pipeline all as specified or as directed

Taking down wall panelling and similar work complete all as specified and directed.

S&F Hollow PVC Wall Lining consisting of 5mm thick Plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing complete all as specified and directed.

S & F 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification and drawing complete all as specified and directed.

S & F in repair towel rail 600mm long of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 190gms) complete all as specified and directed.

S&F in repairs, PVC low level cistern 10 litres capacity, valve less, symphonic action type with float, handle including 32mm dia PVC flush pipe of polyethylene of low or high density & bracket etc complete all as specified and directed .

S&F vitreous China white single piece WC (European type) incl inbuilt vitreous china cistern size 360X640X680mm and and cover and mild steel chromium plated or aluminised hinging device and connection to drain (or out going pipe) all as specified and directed.

S&Fin repairs vitrous china squatting pan of size 580 x 440 mm (Orrisa pattern), white with integral foot rest (excluding flushing cistern & flush pipe) including antisyphonage pipe complete all as specified and directed.

Demolition of old existing unserviceable EWC seat and S&F vitreous china wash down water closet pan ( pedestal pattern) white including connections to drain ( or outgoing pipe) and to flushing pipe anti sypohonage pipe etc & with plastic WC seat cover white closed pattern with flat bottom and cover and mild steel chromium plated or aluminium hinges device complete

S&F in repair vitreous china wash hand basin, white flat back of size 550X400 mm including brackets, 25mm dia PVC waste pipe 75 cms long with necessary fixing arrangement, fancy type pillar tap cast copper alloy with capstan head cromium heads, chromium plated, screwed down high pressure with long screwed shanks and fly nuts complete all as specified and directed.

S&F vitreous china urinal half stall type white, 25mm dia PVC wast pipe, necessary fixing arrangements and urinal speader of PTMT for fixing of 15mm dia pipe (min wt 60 gm) complete all as specified and directed.

S&F in repair PVC connection 15mm size with PTMT nuts of length 450mm complete all as specified and directed.

S&F in repair grating doom 100mm dia of PTMT (min weight 25 gms) complete all as specified and directed.

S&F in repair waste coupling of PTMT (half or full threaded) complete all as specified and directed.

S&F shelf of PTMT fixed to wall with steel screws and PVC rawl plug complete all as specified and directed.

S&F sheet glass shelf assembly consisting of 5.50mm thick sheet glass shelf 12CM wide with chromium plated bracket guard and railing 60 CM long complete all as specified and directed.

S&F in repair 15mm bore fancy type stop valve / angle valve of cast copper alloy chromium plated screwed down, high pressure with crutch or butter fly handles screwed both ends for iron pipe or for unions complete all as specified.

S&F in repair bib taps 15mm bore cast coper alloy CP fancy type, with crutch or butterfly handle, screwed down, screwed for iron pipe or for union complete all as specified and directed.

Taking up or down 15mm steel tubing and connections including cleaning for refixing or removal complete all as specified and directed

Taking up or down 20 mm steel tubing and connections including cleaning for refixing or removal complete all as specified and directed by Engr-in-Charge

S&F 15 mm dia steel water tubing, galvanized, medium grade, with all fittings, fixed to walls and ceiling or in floor complete all as specified and directed by Engineer-in-Charge

S&F 20 mm dia steel water tubing, galvanized, medium grade, with all fittings, fixed to walls and ceiling or in floor complete all as specified and directed by Engineer-in-Charge

S&F in repair GI tubing medium grade with all fitting 25 mm bore fixed to wall or concealed or fitted to ceiling or laid under floor incl taking up or down existing steel tubing complete all as specified and directed

Dismantling false ceiling board or insulation board etc, any thickness including snap grid frame etc complete all as specified.

M&L anodized aluminium snap grid frame work of size 605 x 605 mm for false ceiling complete all as directed and specified.

S&F hanger 6mm dia GI (upto 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia 40mm long complete all as specified

M&L 12mm thick perforated particle board/ tiles for insulation and accoustic purposes, 60cm x 60cm in size, fixed with nails to timber frame work or with staples on snap grid complete all as directed and specified.

S & F in repair 110mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints laid in trenches or fixed to wall complete all as directed and specified.

,---ditto--- all as per srl item No 101 above but 75mm bore complete all as directed and specified.

S & F 110mm bore PVC (SWR) bends any radius complete all as directed and specified.

,---ditto--- all as per srl item No 103 above but 75mm bore complete all as directed and specified.

M&L for powder coated anodised aluminium frame (minimum thickness of powder coating 50 micron) for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as directed and specified.

S&F powder coated anodised aluminium (minimum thickness of powder coating 50 micron) for shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/neoprene gasket required (Fittings shall be paid for separately) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws all complete as per architectural drawings and the directions of Engineer-in-charge

Supply only galvanised mild steel wire cloth 0.63 mm nominal dia of wire & average width of aperture 1.40mm complete as directed and specified.

Supply only 4mm thick plain sheet glass ordinary quality and glazing with oil putty in sqaures not exc 0.5 sqm in each pane complete as directed and specified.

Supply only powder coated anodised aluminum (thickness not less than 50 micron) grill 6-8 mm thick of approved design aperture size 50mmx50mm of standard sections including F type aluminium snap beading screw complete fitted to aluminium frame section complete all as specified and directed. Note: Aluminium frame shall be measured separately

S & F of Rain Water Downtake pipelines fixing done with Pipe Supporting Clamping System having Rain Water Bracket Set with Support + U Bolt System - Rain Water Down take pipes 4" PVC - 1 no. running Vertical Fixed line from Terrace to Ground floor with wall distance 3": Pipe Support Clamping made of 1. Rain Water Bracket Set 4" x 3" made of Low Carbon Hot Roll gauge corrected Oil Pickeled & Drawn (HROP D) Steel (IS 1079); material size 32 mm x 3 mm with ribs and notch are Hot Dip Galvanzied + Zn Al Flake coated having Salt Spray Test (Test method - ASTM B-117-2019) result above 2000 hrs. and U bolt R/M are made of low carbon mild steel with Rod diameter 7 mm approx.; Zn Al Flake coated with noise absorbing transparent ribbed silicon rubber sleeve; with Hex Flange Nut BSW 5/16 x 18 x 8 x 13 with Serration set as per DIN 6923 - Zn Al Flake coated. Hotdip Galvanizing as per IS 2629 (1985) - 610 grams/m2 (> 85 microns). Material Grade : IS 1079 used as per MTC confirms to EN 10204 3.1. Material Qty.: 1. Rain Water Bracket Set with Support 4" x 3" and U Bolt R/M for 4" PVC Pipe Dia. - 1 No.; and 3. Justi Khilla GI coated 2 1/2" - 2 nos. Pipe Support Clamping Unit fixing to be done at every metre distance in the duct as specified in the Technical Drawing. (Refer CE Jaipur Zone Technical Drawing no. TD/2022/01.) Make : Shaivi or equivalent

Excavation in post holes n.exc 0.5 cum getting out in soft/loose soil, returning, filling in & ramming earth or broken rubbles mixed with earth around in layers n.exc 25 cm, watering and removing surplus soil to the distance n. exc 50M and making good surfaces.

M&L for PCC 1:3:6 Type C-2 (using 40mm graded aggregate) in foundation, filling and mass complete all as specified and directed.

S&F Road side safety reflective mirror of size 32 inch/800 mm dia of Poly Carbonate Acrylic material cover PVC with Aluminium beading Plastic body of Red/orange colour incl Pole of 7feet height and connecting clips for Fixing complete all as specified and directed by EIC. (Make:- 3M/DARK EYE or equilant as approved by GE.

Supply and fixing metal tubular dealineator made out of ABS round body fitted with 2 Nos 65 mm dia highly reflective reflectors made out of PMMA and mounted on 45/50 mm dia mild steel pipe of 600 mm height duly powder coated and thermo plastic elastomer 3 bands of green, red and yellow reflector radium tape of 25 mm wide strips with anti theft steel net for reflector protection including embedding in PCC 1:2:4 (150x150x300mm) type B1 or fixing with nuts complete all as specified and directed .

Supply and fixing cat eye solar reflective type of metal body alloy of size 100mm x 100mm x 20mm with PAMA striplens reflector of model No. DA 972.0 fixed with and incl MS stud of suitable size as per manufactures instructions.

Supply and fix solar cat eye aluminum alloy shall (100% water proofing design according to 65) of size 125mm x 125mm x 25mm (shank 65mm) of high efficiency Mono rystafie solar panel 2.4V/ 0.3 watt one NI-ed rechargeable battery (1.2V/ 1600MA) consisting of super bright LED with 10,000 to 18,000 mcd completed as per manufactures instructions etc. all as specified and directed.

M & L for preparing bituminous surfaces of road and marking 2.5mm thick centre lines, stop lines, dashes, arrows etc. and the like on roads pavements with hot applied thermo plastic road marking paint of approved colour confirming to BS 3262-1989 with special applicator machine all as per manufacturers instruction complete all as specified and directed.

M&L preparation of new concrete/ brick/stone surfaces of any description over 10cm width or girth not otherwise described and applying two coat of synthetic enamel paint over a coat of priming paint plaster complete all as specified and as directed.

E/M portion Taking down carefully surface aluminum /copper point wiring, casing capping /PVC concealed conduit for (light, fan, socket, bell or power) including fixture and fittings such as switches, ceiling rose, regulators, sockets, light fittings etc and making good disturbed surfaces complete all as specified and directed.

M&L for point wiring with 1100 volts grade PVC insulated FRLS multistranded copper conductor cable 1.5 sqmm (Phase - Red, Neutral - Black) and earth continuity conductor 1.5 sqmm (Green) drawn into and including concelled rigid non matalic PVC conduit medium grade size not less then 20mm dia ISI marked with all conduit fittings/fixing accessories and unwelded sunken galvanised pressed steel terminal boxes of thickness not less than 1.0 mm covered with and including 3mm thick phenolic laminated white sheet cover/ PVC gang box for mounting switches, sockets, fan regulators etc for one light point controlled by one switch incl making good the disturbed portion complete all as specified and directed.

,---ditto--- all as per item No. 120 above but for one fan point controlled by one switch complete all as specified and directed.

,---ditto--- all as per item No. 120 above but for one light point controlled by two, two way switch complete all as specified and directed.

,---ditto--- all as per item No. 120 above but for one socket outlet 6 Amps controlled by one switch on the same board with other swithces complete all as specified and directed.

,---ditto--- all as per item No. 120 above but for one socket outlet 6 Amps controlled by one switch on independent board complete all as specified and directed.

,---ditto--- all as per item No. 120 above but for one bell point controlled by one bell push complete all as specified and directed.

M&L for point wiring with 1100 volts grade PVC insulated FRLS multistranded copper conductor cable 4 sqmm (Phase - Red, Neutral - Black) and earth continuity conductor 4 sqmm (Green) drawn into and including concelled rigid non matalic PVC conduit medium grade not less then 20mm dia ISI marked with all conduit fittings/fixing accessories with modular metal flush box of thickness not less then 1.0mm thick for covered with modular white sheet cover plate and frame for mounting, switches, sockets, fan regulators for one 3 pin, 16 Amps socket outlet point controlled by one swith on independent board incl making good the disturbed portion complete all as specified and directed.

M&L for point wiring with 1100 volts grade PVC insulatd FRLS multistranded copper conductor cable 1.5 Sqmm (Phase-Red, Neutral-Black) and earth continuity conductor 1.5 Sqmm (Green) drawn into and including PVC casing-capping not less than 32x16 mm ISI marked with all fittings/fixing accessories and unwelded sunken galvnised pressed steel terminal boxes of thickness not less than 1.0 mm covered with 3mm thick phenolic laminated white sheet cover for mounting switches, sockets, fan regulators etc for one light point controlled by one switch incl making good the disturbed portion complete all as specified and directed.

,---ditto--- all as per item No. 127 above but for one fan point controlled by one switch complete all as specified and directed.

,---ditto--- all as per item No. 127 above but for socket outlet 6 Amps controlled by one switch on the same board with other swithces complete all as specified and directed.

,---ditto--- all as per item No. 127 above but socket outlet 6 Amps controlled by one switch on independent board complete all as specified and directed.

M&L for point wiring with 1100 volts grade PVC insulatd FRLS multistranded copper conductor cable 4 Sqmm (Phase-Red, Neutral-Black) and earth continuity conductor 4 Sqmm (Green) drawn into and including PVC casing-capping not less than 32x16mm ISI marked ivory colour with all fittings/fixing accessories and unwelded sunken galvnised pressed steel terminal boxes of thickness not less than 1.0mm covered with 3mm thick phenolic laminated white sheet cover for mounting switches, sockets etc for one 3 pin, 16 Amps socket outlet point controlled by one switch on independent board incl making good the disturbed portion complete all as specified and directed.

S&F switch piano, flush type, single pole one way 6 Amp complete all as specified and directed.

S&F switch piano, flush type, single pole one way 16 Amp complete complete all as specified and directed.

S&F switch piano, flush type, single pole, two way 6 Amp 240 volts complete all as specified and directed.

S&F switch bell push flush type 6 Amp 240 volts complete all as specified and directed.

S&F socket outlet, 2-in-1, 3 pin 6 & 16 Amps combined flush type compete complete all as specified and directed.

S&F socket outlet, 2-in-1, 3 pin 6 Amps flush type compete complete all as specified and directed.

S&F hum free electronic step fan regulator 120-280 volts of 100 watts capacity (socket type) including connecting up complete all as specified and directed.

S&F ceiling rose 3 plates polycarbonate body complete all as specified and directed.

M&L for sub main wiring with two run of 6 Sqmm single core, PVC insulated, unseathed, FRLS multistranded copper conductor cable alongwith one run of 6.0 Sqmm earth wire as earth continuity conductor (Phase-Red, Neutral-Black, Earth-Green) drawing into and including concealed PVC conduit of 20mm dia ISI marked ivory colour & accessories of suitable size including making connection as required complete all as specified and directed. NOTE - Two run of 6 sq.mm phase and neutral wire & One run of 6 sq.mm earth wire & One run of PVC conduit with accessories shall be measured as One length.

,---ditto-- all as per item No. 140 above but two run of 10 Sqmm and one run of 10 Sqmm earth in 25mm dia PVC conduit complete all as specified and directed.

S&F MCBs Distribution board SPN, 8 ways, powder coated, CRCA steel sheet, degree of protection IP-43, IK-09 with reversible double door, 415V, recess mounted having insulated 200 amp tinned copper bus bar, neutral bus bar, earth bar, din bar, detachable gland plate, blanking plate in unused spaces as required, ISI marked including required wiring connections with copper lugs of suitable size provided in MCB DBs complete all as specified and directed.

,---ditto-- all as per item No. 142 above but SPN 240 volt, 4 ways complete all as specified and directed.

S&F MCBs of 'B' curve single pole 6 to 32 Amps having breaking capacity 10 KA, ISI marked including required wiring connections with copper lugs of suitable size provided in MCB DBs complete all as specified and directed.

,---ditto-- all as per item No. 144 above but MCB double pole 32 to 63 amps complete all as specified and directed.

S&F LED batten (1.2M) made of CRCA sheet housing with a PC glossy difusser duly prewired connection having a nominal system lumen output of 2000 lumens at a minimum system efficacy of 105 lumens per watt and total power consumption not more than 19 watt (including driver) having colour temperature of 6500K, CRI>80, THD < 10% and PF > 0.95 complete. Make - Philips cat ref no. ENDURALED "BN 308C- LED -20S- PSU-CDL- WH" or Cramption cat ref no. CIS-305-20-57-SL-PD- NWH or Havells cat no: 600-BS-20W-LED-840SP- C-WH make as approved.

S&F LED light fitting 1 X 10watt (2 feet), decorative ultra slim type with integral driver complete with all accessories and making necessary electric connection from ceiling rose to fitting terminal complete all as specified and directed.

S&F LED bulk head light fitting 9 watt IP 66 & IK 09 with with pressure die cast aluminium housing & polycarbonate diffuser duly prewired connection with 0.75sqmm PVC insulated & sheathed three core flexible multi stranded copper conductor cable complete all as specified & directed.

Taking down MCB distribution board with incoming and outgoing controls any make and capacity after disconnecting complete all as specified and directed.

Taking down carefully sub main wiring with PVC casing capping / PVC surface conduit and making good disturbed surfaces complete all as specified and directed.

S&F energy efficient recessed mounted CRCA sheet LED luminaire 36 watt, voltage range140-270V AC, suitable for 2'x2' grid ceiling with full glow, fully diffused, diffuser and lumen output of 3600 lumens having consant current electronic driver of 36 watt, burning time 50000Hrs, 6500K duly connected with diffuser including connecting three core flexible copper conductor cable of suitable size complete as required.

S & F LED building security LED street light fitting 36 watt comprising of pre wired driver, outdoor type with high pressure die cast powder coated aluminium housing heat resistant glass, clear acrylic cover and accessories with IP 65/66 protection, impact and corrosion resistant incuding thermal management in multiple optics complete incl street light bracket made out of 32 mm dia GI medium grade pipe 1.5 mtr long complete with 02 seats of FI clamps made out of 30 x 5 MS flat & nuts, bolts & washer including painting to clamp with two coats of aluminum silver paint over a coat of primer complete all as specified and directed by Engineer-in-charge

S&F LED flood light 100 watt 230 V AC outdoor type with thermal management in multiple optics and equipped with IP66 protection, with impact and corrosion resistant complete with driver and lamp complete all as specified and directed.

S&F in repair flexion LED AC rope light with connector length of 120 LED/meter, IP-65 waterproof and high surge with stand capability upto 3.5 KV strip light brightness & uniformity of light for 3000K with suitable driver and making necessary electric connection complete all as specified and directed

S&F of spike LED COB garden light 12W LED, Anthracite colour, made by aluminium and making necessary electric connection complete all as specified and directed.

S&F door bell AC 240 volts, buzzer/ding dong single pole complete all as specified and directed.

Excavating in trenchs, n exc 1.5m wide and n exc 1.5m in depth for foundation, etc. or for laying of cables, pipe etc n exc 10sqm on plan and n exc 1.5m in depth and getting out in soft/loose soil complete all as specified and directed.

Removing excavated soil to a distance n. exc 50 m and depositing where directed at a level not exc 1.5 m above the starting point complete all as directed.

Returning, filling including spreading leveling watering and well ramming in layers n. exc 25 cm in soft/loose soil complete all as directed.

M & L Sand cushioning to under ground cable with screened and washed sand (non cohessive), 8 cm before laying cable and 15cm after laying and punned to 18cm after laying of cable complete all as specified and directed by Engineer-in-Charge. Note : Punned thickness shall be considered for payment purpose.

M&L for factory made unreinforced pre-cast concrete cable protection cover LV class type-I with size 250mm X 150mm X 40mm laid across the cable (i.e. width of cover along the length of cable) for UG cable protection on the top of the sand cushioning complete all as specified and directed.

Dismantling and taking out UG cable any size and fixed in any position and removal from site complete all as specified and directed.

Supply, laying, jointing, testing & commissioning 1100 volts heavy duty XLPE cable (ISI marked) with PVC insulated aluminium conductor served with inner sheating of PVC tape armoured with galvanised steel strip or wire and overall PVC sheated cable of size 25 Sqmm nominal cross sectional area 4 core, laid in trenches, ducts, pipes or fixed on poles, including all necessary clamps, nut, bolt washers complete all as specfied and directed.

Supply, laying, jointing, testing & commissioning 1100 volts heavy duty XLPE cable (ISI marked) with PVC insulated aluminium conductor served with inner sheating of PVC tape armoured with galvanised steel strip or wire and overall PVC sheated cable of size 10 Sqmm nominal cross sectional area 2 core, laid in trenches, ducts, pipes or fixed on poles, including all necessary clamps, nut, bolt washers complete all as specfied and directed.

Note:- The contract sum shall be calculated by deducting the amount shown in Credit Schedule attached to this tender, from total amount of Schedule 'A'/BOQ

PUSHPA G ENTERPRISES (BID ID -3163728)

JAGDAMBA CONSTRUCTION COMPANY (BID ID -3163063)

MSR INFRATECH (BID ID -3169009)

M/S ROHIT CONSTRUCTION (BID ID -3163763)