Construction of Project Director Office Building at Chengalpattu in Chengalpattu District

Amount

Construction of Project Director office building at Chengalpet in Chengalpet District Est. Amt. Rs. 44.78 Lakhs

Earth work excavation and depositing on bank with in initial lead of 10 m and initial lift of 2m in hard stiff clay, stiff black cotton soil, hard red earth,earth mixed with small sized boulders and hard gravelly soil as per SS 20B

Filling with river sand with cost and conveyance including all other labour charges etc complete

CC 1:4:8 mix using 40mm ISS HBG metal with cost and conveyance including all other labour charges etc complete

Filling with excavated earth with cost and conveyance including all other labour charges etc complete

Brick work in C.M.1:5 mix using Country bricks including cost and conveyance and all other labour charges etc complete. For 100 Cft or 2.832 Cum

upto basment

above basment

Centering with shuttering for all cc works using MS sheet with including cost and conveyance and all other labour charges etc complete.

upto basment

above basment

Supply and fabrication of steel for cc works using RTS rod including cost and conveyance and all other labour charges etc complete.

RCC 1:1.5:3 mix using 20mm ISS HBG metal with cost and conveyance including all other labour charges etc complete

upto basment

above basment

Plastering in cm 1:5 of 12mm thick with cost and conveyance including all other labour charges etc complete

Paving the floor with design colour Vertified1745.5 tiles of size 305x305x6mm in all floors over a base layer of C.M. 1:3 mix, 20mm thick and pointed with white Cement mixed with colouring pigments at the rate of 0.3Kg/Sqm including finishing neatly and curing, etc., complete, complying with standard specifications and as directed by the departmental officers.

Paving the floor with design colour Anti skid tiles of size 305x305x6mm in all floors over a base layer of C.M. 1:3 mix, 20mm thick and pointed with white Cement mixed with colouring pigments at the rate of 0.3Kg/Sqm including finishing neatly and curing, etc., complete, complying with standard specifications and as directed by the departmental officers.

Dadooing the wall with glazzed tiels in all floors over a base layer of C.M. 1:3 mix, 20mm thick and pointed with white Cement mixed with colouring pigments at the rate of 0.3Kg/Sqm including finishing neatly and curing, etc., complete, complying with standard specifications and as directed by the departmental officers.

Supplying and Fixing of European Water closet with "P" or " S" Trap and with ISI mark. The cost is includs of double flapped PVC seat cover, PVC pipe 110mm dia and all internal fittings and with necessary CI Brakets 12mm brass nipple 15mm dia chromium plated broiwn headwd stop cock of approved quality with ISI mark and nylon connection including fixing the same to wall and giving nessary water supply connection to the European water closet with 12.50 lits capacity porcelin low level flushing Tank with all internal fittings. The European water closet should be fixed on the floor using counter sunk bolts and nuts and necessary teak wood plugs, clamps screws etc., including dismantling the floor or wall wherever necessary and redoing the same to their original condition etc., as per standared specification etc complete.

Supplying and Fixing of Hand wash basin of size 550 x 400 mm (without pedastal) necessary cast iron bracket 15mm dia chromium plated pillar tap 32mm dia ' B' class GI waste pipe 32mm chromium plated brass waste coupling with rubber plug and chain 15mm dia nylon connection etc., including fixing the wash hand basin in possition including cost of teak wood plugs screws rubber washer, white lead and giving water supply connection testing for leakage etc. complete as per standared specification etc complete

Providing FRP door shutter with FRP frames made out of FRP sheets of 3mm thick of over all size 65mmx50mm with rebate suitably reinforced using Ms angle/ flats, cost of holdfasts and solid core FRP shutter panel of 5mm thick and hollow core frames of 3m wall thickness for styles and rails etc of sizes specified by engineers etc complete

Supplying and Fixing of UPVC door with cost and conveyance including all other labour charges etc complete

Main door

Door D

Toilet door D2

Supplying and Fixing of UPVC window with cost and conveyance including all other labour charges etc complete

Wiring with 2x4sqmm (56/0.3mm) PVC insulated SC unsheathed Cu. Cable conductor cable of 1100V grade in suitable heavy gauge M.S.conduit pipe on wall and ceiling with M.S.accessories with 150mm x 100mm x 75mm MS switch box for 15A 3 pin non interlocking CS plug with painting of suitable colour,with continuous earthwire connection by 14 SWG TC wire for open power plug point.SD 13

Wiring with 2x 1.5 sqmm (22 / 0.3 ) PVC insulated single core unsheathed copper conductor cable of 1100V grade in suitablePVC rigid pipe on wall and ceiling with PVC accessories and with TW switch box and 5A F.T. switch with painting of suitable colour with continuous earth wire connection of 14 SWG TC wire for open PVC light point / Fan point (For Electronic regulator) SD 16

Supply and Run of 2 of 4 sq.mm (56/0.3) PVC insulated SC unsheathed Cu.Conductor of 1100V grade in suitable heavy gauge M.S. coundit pipe on wall and ceiling with continous earth wire connection of 14 SWG TC wire with painting of suitable colour SD44

Supply and fixing of single box type 4'36 W flu fitting complete with electronic ballast with TW round blocks on wall or ceiling with flu tube with PVC unsheathed Copper leads from terminals to the fitting. SD 87

Supply and fixing of 1200 mm (48") sweep AC ceiling fan complete with stepped electronic 300W regulator, with 1 metre down rod with fan clamp with side plates and cross arm of size 450 mm (18") SD 106

Painting the Plastered surface with two coats of ready mixed Plastic emulsion paint of Ist quality over one coat of priming coat for plastered surface including cleaning preparing the surface etc. complete. Complying with standared specification. The paint should be got approved by the Executive Engineer before use on work.

Fabricating and fixing in position of MS tube truss using bottom and rafter 120mmx80mmz6.3mm thick RHS pipe intermediate stiffener using 80mm x40mm x4mm thick RHS pipe and wall fixed MS plate10mm thick with bolt nuts in top and bottom including a cost of material labour charges for fabrciating and fixing in postion etc complete

PD Office

7.79 m truss A type

EE Office

7.79 m truss A type

Roofing with Coloured Metal corrugated sheet 2mm thick including cost and conveyance and all other labour charges etc complete.

Supply and fixing of false ceiling using gypsum board with cost and conveyance including all other labour charges etc complete

GST Amount for providing Service to Government Contract Works for the above Construction Works. { GST Amount is the Total GST Amount for total overall quoted amount above this row in column "BB" for all works in this package}

SIVASAKTHI CONSTRUCTIONS