Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Infra Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹36.7 LAccepted-AOC | L1 | Accepted-AOC L1 | |
| 2 | L2₹38.5 L+₹84,079 (2.23%)Rejected-AOC | L2 | Rejected-AOC L2 | |
| 3 | L3₹39.2 L+₹1.6 L (4.21%)Rejected-AOC | L3 | Rejected-AOC L3 | |
| 4 | L4₹41.7 L+₹4.1 L (10.9%)Rejected-AOC 37 222 BUNDU KATRA AGRA UP | AGRA | UP | L4 | Rejected-AOC L4 | |
| 5 | L5₹43.8 L+₹6.1 L (16.3%)Rejected-AOC | L5 | Rejected-AOC L5 |
Tender Value
₹44 L
EMD Value
₹88,000
Closing Date
28 Dec 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE Bharatpur
GE Kanjoli line Bharatpur-321026
Spl repair to certain Bldgs at Stn HQ Bldg No T- 1 and addn/altn to Bldg No P -71 at Bharatpur Mil Stn Bharatpur
2023_MES_629423_1
8328/E8
Open Tender
Civil Works
Item Rate
180 days
GE Bharatpur
As per NIT
7 documents required · 7 mandatory
₹500
GE Bharatpur
₹88,000
Yes
24 Feb 2024
23 Nov 2023
30 Dec 2023
23 Nov 2023
28 Dec 2023
15 Dec 2023
25 Nov 2023 - 8 Dec 2023
Amount
Dismantling wall and ceiling boards ( fibre, pulp, insulation ,etc. ) or insulation boards/slabs/blankets, any thickness, including cover fillets complete all as specified.
S&F for PVC wall panelling in repair with panel of 300 mm x 6 mm Hollow section of Sintex pattern SPUF- 146 or equivalent , fixed with PVC plug and screw and inserted to next panel groove, edges and corners of all door/ window/openings etc to be covered with PVC angle fixed with solvent cement complete all as specified & as per manufacturer's instructions.
S&F anodised aluminium snap grid frame work of grid size 605 x 605 mm false ceiling complete all as specified.
S&F for Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified.
S&F for 4 mm thick non-asbestos fibre cement building boards fixed aluminium framework, complete all as specified. Note: Frame work for ceiling shall be measured and paid separately.
Dismantling asbestos cement (corrugated or semi corrugated) sheets in roof coverings, complete all as specified.
Dismantling wrought iron or mild steel work of any description not otherwise provided for, complete all as specified.
Dismantling timber scantlings 40 Sqcm and over in section from unframed work, complete all as specified.
S&F rolled mild steel work as in roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections, MS Pipes) including distance pieces, cleats etc. conforming to Fe-410W Gde E-250 quality 'A', complete all as specified.
M&L for mild steel work as in wind ties for roof covering including securing bolts etc. including all necessary drilling, bolting or riveting etc and similar work conforming to Fe 290 Gde E-165, complete all as specified and directed.
All as per srl Item No. 10 here in above, but fixing only, complete all as specified and as directed
M& L Pre painted galvalume alumimnium zinc coating GI based corrugated steel sheet 0.50 mm thick, sheeting of any colour having strength of 550 mpa as in roof covering etc, complete all as specified.
M& L Pre painted galvalume alumimnium zinc coating GI based plain steel sheet 0.50 mm thick sheeting of any colour having strength of 550 mpa as in roof covering etc, complete all as specified.
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises, complete all as specified.
M&L for 20-25 mm thick kota stone slab as in flooring/steps laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing over and including 20 mm thick screed bed in CM 1:6, complete all as specified.
M&L for 15 mm thick machine cut kota stone slab on vertical surfaces such as skirting, dados etc. set and jointed in neat cement slurry and pointed in colored cement to match the shade of Kota stone laid over 10 mm thick rendering in CM 1:4 on fair faces of brick work or concrete surfaces finishing rough to receive stone, complete all as specified.
M&L for 25 mm thick PCC 1:2:4, type B-0 using 12.5 mm graded stone aggregate as in sub floor, laid and finishing the surface of concrete topping even and rough to receive screed for tiling, complete all as specified.
M&L for Light shade vitrified ceramic tiles, 8-10 mm thick (square/rectangular) polished, area of each tiles not exc. 0.36 sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the floor, laid over 15 mm thick screed bed in CM 1:6, complete all as specified.
M&L for coloured non - skid Ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exc. 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the floor, laid over 15 mm thick screed bed in CM 1:6, complete all as specified.
M&L for glazed ceramic tiles, coloured/printed tiles in vertical surface of size 450x300x7 mm thick, laid over 10 mm thick rendering in cement mortar (1:4) and set and jointed in neat cement slurry & pointed in white cement with pigment to match the colour of tiles, complete all as specified.
Taking up or down steel tubing and connections, 15 mm bore fixed on walls, floors or ceiling etc complete all as specified .
Taking up or down steel tubing and connections, 20 mm bore fixed on walls, floors or ceiling etc complete all as specified .
S&F GI tubing medium grade ISI marked galvanised with all fitting and fixed to walls & ceilings or laid in floors, bore of pipe 15 mm complete all as specified.
S&F GI tubing medium grade ISI Marked galvanised with all fitting and fixed to walls & ceilings or laid in floors, bore of pipe 20 mm complete all as specified.
S&F in repair for Vitreous china single piece WC, size: 360x660x755 mm, with PP soft close slim seat cover, hinges cistern fittings, fixing accessories set, complete all as specified.
S&F in repair 15 mm bore, 2-way bib cock with wall flange, cast copper alloy, fancy type chromium plated, screwed down high pressure, screwed both ends for iron pipe or for unions complete all as specified.
S&F in repair for health faucet (ABS Body) with 8 mm dia,1.20 m long flexible tube & wall hook, complete all as specified.
S&F in repair of SS towel ring (square/rectangular shaped) 20mm dia, fixed complete all as specified.
S&F in repair Bib tap, cast copper alloy, chromium plated, fancy type long body with crutch or butterfly handle, screwed down, suitable for 15 mm nominal bore iron pipe screwed for iron or brass ferrule and fixed complete all as specified.
S&F in repair pillar tap, cast copper alloy, with capstan heads, chromium plated, fancy type screwed down high pressure, with long screwed shank and fly nuts, with or without lettered "Hot" or "Cold" suitable for 15 mm nominal bore iron pipe, screwed for iron pipe and fixed complete all as specified.
S&F in repair 15 mm bore stop valves, cast copper alloy, fancy type chromium plated, screwed down high pressure with crutch or butter fly handle screwed both ends for iron pipe or for unions complete all as specified .
S&F in repair 15 mm bore stop valves, cast copper alloy, fancy type chromium plated with long shank and cup (concealed type), screwed down high pressure with crutch or butter fly handle screwed both ends for iron pipe or for unions complete all as specified.
S&F in repair vitreous china wash down water closet (Pedestal pattern) white excluding (flushing cistern and flush pipe), complete all as specified.
S&F in repair vitreous china squatting pan,Órissa pattern size 580 x 440 mm white, with integral foot rest and CI 'P' trap complete, all as specified.
S&F plastic water closet seat, white, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device seat and cover for pedestal pan, complete all as specified.
S&F in repair toilet paper holder with flat recessed type stainless steel, fixed to walls with chromium plated (CP) brass screws complete all as specified.
M& L for preparation of new plastered or un plastered surfaces of wall including cornices, pilarters etc and applying two coat of cement based paint of approved colour over a coat of primer on wall surface complete all as specified.
S&F in repair PVC valveless, syphonic action type, flushing cistern, low level, white, 10 lit capacity with inlet, ball valve, float and handle including brackets complete all as specified.
S&F in repair Vitreous China wash basin, white, flat back, size 550x400 mm including coupling, brackets & waste pipe of polythelene of low or high density complete all as specified.
S&F PVC connection 15 mm size with PTMT nuts of length 450 mm complete all as specified.
M& L for preparation of old decorative concrete plastered/un-plastered surface of wall including treating oil and greasy spots removing nails and filling small holes by putty and applying one coat of cement based paint of approved colour on wall surface complete all as specified.
S&F in repair Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12 cm wide with chromium plated bracket guard and railing 60 cm long complete all as specified.
S&F in repair corner sheet glass shelf assembly (set of 3) consisting of 5.5 mm thick sheet glass shelf with chromium plated bracket guard and railing 60 cm long complete all as specified.
S & F in repair of chromium plated shower rose 125 mm dia with 200 mm long CP arm with swivel joints, any size, including fixing to steel pipe or union complete all as specified.
S&F in repair of Tubular towel rail, 20mm dia, D type, 60 cm long between flanges complete all as specified.
S&F in repair of SS grating 100 mm dia fixed in floor, complete all as specified .
S & F 1000 ltr ISI marked three layer, white colour, rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) with thread type cover and fixed with screw hoisted and fixed in position & including 20 mm brass ball valve and dismantling of existing tank complete all as specified .
Demolition & breaking up drain pipes AC, (Salt glazed ware, AC or Reinforced concrete) set in CM Internal dia of pipe 100 mm/75 mm complete all as specified .
S&F PVC (SWR) pipe not less than 6 Kgf/sqcm rating single socketed, in any length with rubber ring joints including clamps of FI 40x3 mm fixed bolt 8 mm drilled to wall, in walls, type 'B' ISI marked of 110 mm bore complete all as specified.
S&F PVC (SWR) pipe not less than 6 Kgf/sqcm rating single socketed, in any length with rubber ring joints including clamps of FI 40x3 mm fixed bolt 8 mm drilled to wall,in walls, type 'B' ISI marked of 75 mm bore complete all as specified and as directed.
S&F PVC (SWR) bend of 110 mm bore with access door of any radius complete all as specified.
S&F PVC (SWR) bend of 75mm bore with access door of any radius complete all as specified.
Taking down chowkats or frames n. exc 1.5 sq. m each with shutters (without taking off shutters from the frame) complete all as specified.
Taking down chowkats or frames exc 1.5 sq. m but n exc 4 sq. m each with shutters (without taking off shutters from the frame) complete all as specified.
Taking down shutter of any description area exc 2.0 sq. m each complete all as specified.
S&F 40 mm thick Flush Shutters, Solid core construction, Single or double rebating shall be square or splayed, with block board core and both face is covered with plywood face panels commercial type free from twist or wrap in plane, complete all as specified.
S&F factory made, 30 mm thick, 2nd class hardwood glazed and skeleton shutters, open rebated and prepared to receive glass, gauge etc.diveded in squares, edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, gauge etc., sizes of members of shutters as specified in clause 8.24(a) SSR Part I complete all as specified.
S & F for Solid PVC Door Frame of the size 50 x 47mm made out of 5 mm PVC sheet. The door profiles are to be reinforced with 19x19mm M.S Square tube. The profile shall be cut and mitred at two corners and joined by inserting 2nos. of 150mm long brackets of 15x15mm M.S. square tube inside the 19mm x 19mm M.S. square tube and suitably screwed complete all as specified.
Taking down shutter of any description area exc 1 sqm and n. exc 2 Sqm each complete all as specified.
S & F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement all as specified & shown on SSR 2020 (Part-II) complete all as specified.
S&F SS hinges medium weight of size 100 mm, complete all as specified.
S&F aluminium anodised, barrel tower bolts of extruded section, 125 mm length of bolt and fixed with screws, complete all as specified .
S&F Aluminium handles, cast type, anodised of 125 mm size complete all as specified.
S&F MS butt hinges medium weight cold rolled of size 100 mm, complete all as specified .
S&F aluminium anodised,barrel tower bolts of extruded section, 200 mm length of bolt and fixed with screws, complete all as specified.
S&F in aluminium door seal of overall size 42 mm having nylon brush of 20 mm fixed on aluminium body strip of 22 mm, fixed with screw on Aluminium door, wooden shutters or PVC shutters, complete all as specified.
S&F 300 mm long aluminium alloy, anodized, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts of extruded sections or cast aluminium alloy and fixed with screws complete as as specified.
S&F Aluminium handles, cast type, anodised of 150 mm size complete all as specified.
S & F150 mm floor door stopper of aluminium alloy body and tonge, anodised with hard drawn steel spring, complete all as specified.
S&F in repair for decorated curtain rod, 25 mm dia and 1.0 mm wall thick, Stainless steel fixed with fancy type brackets, stops etc., complete all as specified.
M & L powder coated aluminium frame for doors, windows, ventilators with one or more rebates including aluminium channels for sliding shutters, jointing cleats for fixing etc., complete all as specified.
Alll as above item No 71 but fixed in repair
S&F in repair powder coated aluminium door shutters with aluminium section weight not less than 0.55 kg/m including necessary joining cleats, glazing clips, ruber neoprene packing, 02 Nos aluminium handle each door, hinges, anodised aluminium snap beading screws etc., complete all as specified.
S&F powder coated aluminium window/ ventilator shutters side hungs type with sash, aluminium section weight not less than 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stay 150 mm long (1 No) suitable , type B-21 hinge 100 mm long (2 No), suitable handle (1 No) etc for each leaf, complete all as specified.
All as item No 74 above but fixed in repair
S&F for aluminium deco grill in door and windows with weight not exceeding 1.00 Kg/Sqm including necessary arrangement for fixing etc as specified and directed.
S&F for 4.00 mm thick sheet glass with solar control film 25 micron reflective type sticked to glass pane ,ordinary quality exc 0.5 Sqm in each pane complete all as specified .
S&F for Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples, complete all as specified.
S&F Door closer hydraulically regulated designation No 3, univeral type, of aluminium (extruded section body), suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed, complete all as specified.
Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or from metal frame or stone or concrete or bricks surrounds glazesd with putty, taking out old pins punching or drilling out, complete all as specified.
S&F for 3.0 mm thick sheet glass ordinary quality and glazing with oil putty in square n.exc 0.5 Sqm each pane, complete all as specified.
S&F for 3.0 mm thick figured glass ordinary quality and glazing with oil putty n.exc 0.5 Sqm each pane, complete all as specified.
S&F for Galvanised mild steel wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks or galvanised wire staples or rivets, complete all as specified.
S&F in repair Galvanised mild steel wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks or galvanised wire staples or rivets, complete all as specified.
Demolition of brickwork or stone boulder masonry built in cement mortar including all quoins, arches, pillars etc,and precast concrete articles. complete all as specified.
M&L for PCC type D2 (1:4:8) using 40 mm graded crushed stone aggregate as in foundation,filling/bed/mass concrete complete all as specified.
M&L for Brick work with sub class 'B' old size bricks straight or curved on plan exceeding 6 metre mean radius, built in cement and sand mortar (1:4), complete all as specified.
All as item No 87 above but in cm 1:6
Taking down cement or cement lime plaster of any description from brick or stone walls including raking out joints, hacking for key, scrubbing down with water etc., complete all as specified.
M&L for rendering 10 mm thick in cement and sand mortar 1:6 on fair faces of brick work or cement concrete surfaces including finishing the surface even and fair, complete all as specified.
M&L for rendering 15 mm thick in cement and sand mortar 1:4 on brick work or cement concrete surfaces including finishing the surface even and fair, complete all as specified.
All as item No 91 above but on other than fair face.
M&L for preparation of newly plastered or un plastered surfaces of walls and applying two coats of oil emulsion distemper white or tinted (copolymer based resin glue to be added for longer durability and better finish) over one coat of water based white pigmented alkali resistant priming paint, over 1 mm thick wall care putty on Wall Surface including all necessary arrangement for execution of work ,complete all as specified.
M&L for preparation of new plastered surfaces and applying thouroughly wetted surface to ensure better sticking including sand paper gentle rubbing to obtain smooth surfaces, including all necessary arrangement for execution of work and applying two coats of exterior weather proof paint with roller application over one coat of water based white pigmented akali resistant priming paint for external wall over 1 mm thick white external wall cement putty , complete all as specified.
Complete removal of existing treatment on Wall including washing rubbing down and stopping of distempered and painted surface and preparing old surface applying thouroughly wetted surface to ensure better sticking including sand paper gentle rubbing to obtain smooth surfaces, including all necessary arrangement for execution of work and applying two coats of exterior weather proof paint with roller application over one coat of water based white pigmented akali resistant priming paint for external wall, complete all as specified.
M & L for Preparation of old decorative concrete, plastered/ un-plastered surface of wall including treating oil and greasy spots removing nails and filling small holes by putty and prepare the surface and applying one coat of distemper oil emulsion white or tinted complete all as specified.
M&L for painting to new or previously untreated steel surfaces of any description over 10 cm in width or girth with two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer including preparation of surfaces complete all as specified.
M&L for painting to new or previously untreated steel surfaces of any description n exc10 cm in width or girth with two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer including preparation of surfaces complete all as specified.
M&L for one coats painting with synthetic enamel paint to old wood or wood based surfaces of any description, not otherwise described over 10 CM width or girth including preparation of surface complete all as specified.
M&L for one coats painting with synthetic enamel paint to old steel or steel based surfaces of any description, not otherwise described not exc 10 CM width or girth including preparation of surface complete all as specified.
Dismantling posts or struts (wood, steel or R.C.C.) embedded in concrete, brick work, masonry, etc. any section, including taking out embedded portion and making good disturbed ground complete all as specified.
Dismantling fencing wire mesh, any type complete all as specified.
Excavation in post holes each n. exc .50 cum, getting out in soft/loose soil and removing surplus material n. exc 50 m and making good disturb surfaces complete all as specified .
M& L preparation of new or previously untreated wooden surfaces of any description not otherwise described over 10cm width or girth and applying two coat of synthetic enamel paint over a coat of pink primer complete all as specfied.
M& L preparation of old wooden surfaces over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified.
M&L for PCC (1:2:4) type B-1 using 20 mm graded crushed stone aggregate as in benching, copings, bed plates, kerbs and the like including weathering slightly rounded or chamsfered angles, throating etc including necessary formwork complete all as specified.
S&F for Mild steel work of Fe-290 Gde E-165 as in angle iron fencing posts and struts & flat iron, drilled and countersunk for boulders running bars, including embedding in concrete and securing etc post and struts in fencing including cutting, tops to shape as directed, bent to shape, drilling holes, notching for wire etc. flat iron fillets (for securing wire mash etc.) including all necessary drilling, bolting or riveling etc. complete all as specified.
S&F for Mild steel Round bars conforming to Fe 290 (Gde-E-165) 10 mm dia and over as in horizontal vertical fillets in fencing including hooking complete all as specified.
Supply only Chain link MS galvanised fencing, mesh size of 75 mm & nominal dia of mesh wire not less than 3 mm, complete all as specified.
Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts etc. including provision of binding wire complete all as specified.
S&F for Mild steel screw bolts (machine made) of 10 mm dia and 50 mm long with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut complete all as specified.
M&L Precast cement concrete type B0 (1:2:4) using 12.5 mm graded stone aggregate Set in CM(1:4) louvres and jallies, 50 mm thick (measured solid), including all mouldings but excluding frame complete all as specified.
M&L Precast cement concrete type B1 (1:2:4) using 20 mm graded stone aggregate in window or door cills, lintels, bressumers, steps, quoin blocks (for use with masonry), string courses, copings, kneelers, apex stones, pier caps, columns, posts, boundary pillars, bed plates, pintle blocks, anchorage blocks, bonders (for stone walling), corbels, brackets, etc.(of any section indicated), with plain fair faces, including chamfers, weatherings, throating etc. and setting in CM(1:4) with joints to match complete all as specified.
S&F of venetian blinds mounted on aluminium head rail and bottom bar & fixed as per manufacturer instructions complete all as specified.
M & L for framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes, barred iron doors, ladders, framed balusters, walk ways, railings, framework of water tanks and similar work conforming to Fe.290.Gde-E-165, complete all as specified .
S&F of welded steel wire fabric ,weight n. exc 4.00 kg/sq. m fixed to steel members complete all as specified and as directed.
Cutting or uprooting grass incl removing old mud phuska of any thickness, removing filled soil below mud phuska, removing rubbish off the premises upto 100m, cleaning surface and preparing to receive new treatment complete all as specified.
M&L for screed bed or bedding layer of cement mortar 1:4, 20 mm thick finished even and smooth without using extra cement complete all as specified.
M&L for preparing surfaces for roof treatment by removing all loose gravel, dirt, oil, grease and foreign matter by jet of dry air and clean the surfaces mechanically or by grinding to make it smooth before application, repair all cracks by cutting "V" groove and fill with PMC mortar (Polymer modified cement mortar) prepared by cleaning free from dust and loose particles and apply on dry surface first coat of crack fillar using putty knife or trowel allow to dry for 4 to 6 hr, afterthat apply second coat and dry for 4-6 hrs in ratio as per manufacturers specification, provide 75 mm x 75 mm coping made out of PMC mortar as above on all joints of vertical upstands to ensure that moisture content in the prepared surface does not exceed 5% immediately before application of liquid membrane. Material incorporation & Protection be provided as Terrasheild first apply with water (ratio terrasheild : water will be 4:1) as primer with coverage area 0.1 Kg per Sqm. After 2-3 hour later, second step apply directly first coat of terrasheild 0.30 to 0.40 mm thickness coverage area 0.5 to 0.75 Kg per Sqm with roller.Spread non woven geo textile of 40 / 50 gsm with overlap of 50 mm in both direction when the surface is still tacky. After 4-6 hour later, apply third step apply directly second coat of terrasheild 0.30 to 0.40 mm thickness coverage area 0.5 to 0.75 Kg per Sqm with roller. final thickness of complete treatment should be minimum 1.0 mm. Water tank and Khurra location one additional coat of terrasheild 0.30 to 0.40 mm thickness coverage area 0.5 to 0.75 Kg per Sqm be provided. after complete application full curing minimum 7 days . Above complete application will be done authorized apllicator from Manufacturer and manufacturer's specification. Make: IWL Co./ STP/ Piddilite .
Demolition of cement concret(reinforced) roofs, floors, beams,staircases, landings, chajja and similar suspended work, complete all as specified.
M&L for Form work to sides and soffits of floor or roof beams , beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc also splays between floors and beams, etc for rough finished flat surfaces of concrete, complete all as specified .
M&L for MS TMT bars ,10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified.
M&L for RCC Nominal Mix ,type B1 1:2:4 using 20 mm graded stone aggregate for Beams, cantilevers, bressummers, lintel beam etc. complete all as specified.
Demolition of cement concrete (unreinforced) in ground floors and pavings nexc 15 cm thickness (below or above ground levels) complete all as specified.
M&L for 100 mm thick PCC 1:4:8 type D-2 (using 40 mm graded stone aggregate) as in sub base complete all as specified.
M&L 75 mm thick cement concrete 1:3:6 type C2 (using 40mm graded crushed stone aggregate) as in plinth protection/path laid in panel surface finished even and fair without using extra cement complete all as specified .
Dismantling of Stone slabs in roofs, suspended floors, chajjas, landings, etc., any thickness, jointed in any mortar complete all as specified.
M&L for sand stone slabs of 75 mm thick in cills, landings, etc. n exc. 2m in length, punched dressed on face and along exposed edges, self faced on other side and set and pointed in cement mortar 1:4, complete all as specified .
Excavation in trenches, n. exc 1.5 Mtr wide and n. exc 1.5 Mtr in depth for foundation/laying of cable and getting out in soft/loose soil complete all as specified.
Removing of excavated soil to a distance n. exc 50 Mtr and depositing where directed at a level n. exc 1.5 Mtr above the starting point complete all as specified.
Returning, filling in including spreading, levelling, watering and well ramming in layers n. exc 25 cm thick complete all as specified.
Supply & spread unwashed dry river sand for sand cushioning and covering the under ground cable in trenches complete all as specified. (Note :- Punning thickness shall be measured.)
M&L for brick protection with sub Class`B` bricks old size laid dry, flat over cable perpendicular across the cable in trenches complete all as directed.
Supply, laying, testing & commissioning LT XLPE insulated armoured (heavy duty) electric cable with stranded aluminium conductor 1100 volts grade (ISI marked) & laid in trenches/pipes or fixed on pole of the following sizes:-
50 Sqmm 3.5 core
16 Sqmm 4core
10 Sqmm 2 core
M&L Earthing complete with galvanised steel earth plate electrode 60x60cmx6mm thick, burried directly in ground (earth pit not less than 2.25 meters deep below ground level) with top edge of the plate not less than 1.5 metres below normal ground level connected to galvanised iron strip 32x6 mm as earthing lead by means of bolts, nuts check nuts and washers of galvanised iron or steel all as showin in electrical plate No 3 connected to earthing test point all as specified or indicated includig testing on completion.
Taking down carefully copper/aluminium point wiring (light, fan, bell,same board, independent or power) complete fittings such as switches, ceiling roses, pendents, regulators, sockets etc removing materials and making good disturbed surfaces of wall, floor & ceiling etc.
Dismantling of old U/S sub main wiring and service wire of any size & make.
Dismantling of old U/S rusted main switch/DB of any size capacity and make.
M&L point wiring complete with 1.5 Sqmm 02 x single core multistranded copper conductor of 1100 volts grade PVC pre insulated FRLS and unsheathed cable enclosed in PVC conduit pipe with all PVC accessories such as Tee, bend, collar, elbow, square junction box etc fixed on the concealed surface of wall/ceiling by means of PVCsleevel/dash fastners with cadmium plated screws including suitable size of PVC boards/ existing sunken box for mounting fittings like switches, sockets, fan regulator etc including 1.5 Sqmm insulated but unsheathed copper earth continuity conductor to common earth and connedcted to earth dolly complete all as specified and directed for the following :-
One light point controlled by one way switch.
One fan point controlled by one way switch.
One bell/buzzer point controlled by one push button.
One 3 pin 6 Amp socket point outlet on the same board with other switches
One 3 pin 6 Amp socket point outlet on the independent board
All as per item No 140 above but with multi stranded copper conductor cable 2.5 Sqmm size for 3 pin 16 Amps socket point outlet on independent board including 2.5 Sqmm copper cable PVC insulated FRLS unsheathed copper continuous earth wire including connecting to common earth dolly complete all as specified and directed.
S&F ceiling rose surface bakelite 50 x 40 mm three terminal ISI marked including suitable size of PVC board.
M&L bell multi musical type 230 volts grade.
S&F modular Socket, 6A - 2/3 pin combined 2 module 230 volt.
S&F modular Socket 6A/16A - 2/3 pin combined 2 module 230 volt.
S&F modular switch 1 way 6 Amps 1module 230 volt grade.
S&F modular switch 1 way 16 Amps 1module 230 volt grade.
S&F modular bell push flush type 5 Amps 230 volts.
S&F modular step type electronic fan regulator 2 module 120 watt.
S & F white cover plate with frame,2 module
S & F white cover plate with frame,6 module
S & F white cover plate with frame,8 module
S & F white cover plate with frame,3 module
S & F Metal flush box 2 module
S & F Metal flush box 8 module.
S & F Metal flush box 3 module
S & F Metal flush box 6 module
Supply & fix 4 way VTPN distribution board (with provision of MCCB as incomer & wintrip MCCB as outgoing)
Distribution board factory made and tested made of sheet metal enclosure powder coated suitable for mounting the MCB 240 volt of the following DBs :-.
4 way TPN with 200 amps rated busbar 240 volt (double door) complete all as specified.
8 way SPN with 200 amps rated busbar 240 volts (double door type).
4 way SPN with 200 amps rated busbar 240 volts (double door type).
S&F MCCB, MCB with GI hardware fixed in DB's of the undermentioned type and rating. .
MCCB 415 volts 100 Amps 04 Pole 16 KA.
MCB TPN 63 Amps, 415 Volts
MCB SP 240 volts 10-32 Amps
MCB SPN 40 Amps, 240 volt
M&L submain wiring complete with 6 Sqmm single core multi standred PVC insulated and sheathed cable FRLS copper conductor two runs and one run of 6 Sqmm copper cable for earth continuity conductor in and including drawn through PVC conduit/sleeves with all PVC accessories fixed on wall, floor/ceiling etc.
M&L submain wiring complete with 4 Sqmm single core multi standred PVC insulated and sheathed cable FRLS copper conductor two runs and one run of 4 Sqmm copper cable for earth continuity conductor in and including drawn through PVC conduit/sleeves with all PVC accessories fixed on wall, floor/ceiling etc.
S&F Linear LED T8 tubular lamp of 20 watt with extruded aluminium body,PC diffuser and inbuilt driver including compact batten suitable for LED T8 lamps , complete with all accessories internally pre-wired and including connecting to ceiling rose with three core flexible copper conductor cable of size 1Sqmm Cat Part No:DIJB12LT8-20 and Lamp -LGT8-20-865-2, Make Crompton or equivalent in Bajaj/Havells/Philips/Crompton.
Supply and fixing sensor based 20 watt LED tubelight fitting batten type 4 X feet long with rod complete with all accessories and including connecting up with three core twisted flexible copper conductor cable with suitable size of 230V, 50 Hz, complete all as specified and directed.
Supply and fixing LED mirror light fitting with high out put with low energy consumption of capacity 6 watt,waterproof moisture anti-fog anti-corrosion anti-rust,curved LED off-white including connecting up with three core flexible copper conductor cable of suitable size complete
S&F in repair 35/36 watts LED street light fitings new generation energy saving, environmental friendly, long life, versatile pressure die cast aluminium IP66 with 10KV surge protection road way, luminaire with high power LED as light source and suitable drivers etc and connecting with 4 sq mm solid aluminium conductor PVC insulated twin core weather proof cable from fittings to the jucntion box and fixing to complete all as specified and directed ,.
S&F LED Recessed full lit luminaire with glare free uniform illumination 2 ft x 2 ft, 35/36 Watt , complete with all accessories internally pre-wired and including connecting to ceiling rose with three core flexible copper conductor cable of size 1Sqmm
M&L bracket light fitting wall mounting, champagne gold finish fixture with plastic body suitable for 14 W LED lamp B22 base. all as directed by Engr-in-charge.
S & F street light GI bracket of 0.6 mtr long made out of 40mm dia light grade GI pipe bend to shape of 120 degree end welded at required including 02 Nos MS clamp of FL 40 x 6mm including nuts bolts & washers complete necessary fixing arrangements on pole as directed.
Earthing complete with Galvanised steel earth plate electrode 600 x 600 x 6 mm buried directly in the ground vertically to depth not less than 3 Mtr below the ground level with the top edge of earth plate, depth not less than 2.25 Mtr below the ground level connected to connected to galvanised earth lead wire 4.0mm dia by means of bolts, nuts and washers protected by GI tubing light grade 40 mm dia uptoTest point 20 mm dia watering pipe with funel & wire mesh, PCC pit in PCC 1:2:4 using 20 mm stone aggregates chamber 40 mm thick RCC cover slab (1:2:4) type B-1 using 20 mm graded stone aggregates complete all as specified and shown in electrical plate No.3 of SSR Part-I including earth work in any type of soil ,removal of surplus sil and providing charcol dust & salt layers all around the earth plate upto 15 cm all as required specified & directed by engr in charge ( Note:- Up to 7.5 Mtr length of pipe of 40 mm dia and GI strip shall be deemed to be included in unit rate quoted by tenderer GI pipe and GI strip beyond 7.5) will be measured separately under respective item.
Cutting chases pinning in making good to facing where required and pointing in vement mortar 1:3 to ends or edges of landing steps cills, sunshades, shelves lintel etc, and cutting chases for concealed water tubing or concealed conduit wiring etc, and making good gutting not exc 10 cm girth on stone concrete block or slab walls.
S&F in repair modular sheet metal enclosure of single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB of SP 25 Amps, 240 volts.
Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 250 MM
Material and labour for cutting suitable holes in existing masonary wall and fixing suitable size hume pipe for fixing of exhaust fan 250/300 mm dia and making good disturbed surfaces with cement mortar (1:4) and finished to match existing surface complete all as specified .
S&F Wall Mounted fan (white) of 400 mm sweep, 5 star rating copper wound with super energy efficient connecting wire PVC insulated twisted flexible 0.5 sqmm copper conductor including all standard accessories & old unserviciable ceiling fan deposited to E/M store complete all as specified. Model No- Aindrila Premium of Make:-Havells or equivalent in cromption / Orient / Bajaj etc
Shifting of split AC system with indoor unit & outdoor unit with proper fixing, servicing & Gas filling with connected accessories complete as specified.
M/s Ranaji Construction Co
GANGA CONSTRUCTION
PD GUPTA AND COMPANY
Captainkomalchaharconstructions
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .