Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Infra Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹9.9 LAccepted-AOC | L1 | Accepted-AOC RATES ARE FOUND REASONABLE AND THE FIRM BEING L1 BIDDER | |
| 2 | L2₹10.5 L+₹3,609 (0.35%)Rejected-Finance OPPOSITE GHOOM DRC PO GHOOM DISTT DARJEELING WB PIN 734 102 | DARJEELING | WEST BENGAL | 734102 | L2 | Rejected-Finance BEING L2 BIDDER | |
| 3 | L3₹10.5 L+₹8,762.50 (0.84%)Rejected-Finance | L3 | Rejected-Finance BEING L3 BIDDER | |
| 4 | L4₹10.6 L+₹11,225 (1.07%)Rejected-Finance | L4 | Rejected-Finance BEING L4 BIDDER | |
| 5 | L5₹10.6 L+₹11,712 (1.12%)Rejected-Finance | L5 | Rejected-Finance BEING L5 BIDDER |
Tender Value
₹9.5 L
EMD Value
₹19,000
Closing Date
13 Jun 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
AGE I DARJEELING
AGE I DARJEELING JALAPAHAR CANT DIST - DARJEELING
REPAIR TO CERTAIN BR WORKS INCL STEEL, WOODEN, ALUMINIUM JOINNERY AND MISC ITEMS FOR KATAPAHAR AREA UNDER AGE I DARJEELING
2024_MES_655830_1
9115/E8
Open Tender
Civil Works
Item Rate
180 days
KATAPAHAR
AS PER NIT
8 documents required · 8 mandatory
₹500
AGE I DARJEELING
₹19,000
Yes
13 Jul 2024
25 May 2024
15 Jun 2024
25 May 2024
13 Jun 2024
8 Jun 2024
Amount
Taking down shutters of any description not exc. 1 sqm each complete all as per specified and as directed by Engineer-in-charge.
Taking down shutters of any description exc. 1 Sqm and not exc. 2 Sqm each complete all as per specified and as directed by Engineer-in-charge.
Taking down chowkats or frames not exc. 1.5 Sqm each with shutter (with out taking off shutters from the frame) complete all as per specified and as directed by Engineer-in-charge.
Taking down chowkats or frames exc. 1.5 Sqm but not exc. 4 Sqm each with shutter (without taking off shutters from the frame) complete all as per specified and as directed by Engineer-in-charge.
S&F Steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, devotailed or welded, complete all as per specified and as directed by Engineer-in-charge.
S&F aluminium anodised frame for doors, windows, ventilators etc with one or more rebates including joining cleat for fixing etc, complete all as per specified and as directed by Engineer-in-charge.
S&F aluminium shutters for doors, windows, ventilators & partitions work including providing and fixing hinges/pivots and making provision for fixing of fittings wherever required including the cost of EDPM rubber/neoprene gasket required with extruded built up standard tubular sections/appropriate Z-sections and other sections of approved make confirming to IS:733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top , bottom and sides with required EPDM rubber/neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, aluminium snap beading for glazing/panelling, C.P. brass/stainless steel screws including old u/s aluminium frame with shutter of any description complete all as per architectural drawings and as directed by Engineer-in-charge. Note: Glass and Particle board shall be measured and paid seperately as supply only.
All as per serial item No. 08 above but exc. 0.5 sqm each pane.
Supply only particle board 9 mm thick, medium density, flat pressed, single layer type or three layer type with BWR type adhesive, fixed with screws to timber/aluminium frame work, complete all as per specified and as directed by Engineer-in-charge.
S&F for mild steel window guard bars, plain, let in and fixed independently in wooden frames, Lor T section, supports for shelves etc., and similar articles conforming to Fe 290 Gde E-165 including drilling holes, complete all as per specified and as directed by Engineer-in-charge.
S&F in repairs galvanised mild steel wire clothes 0.56 mm nominal dia of wire and average width of aperture 1.18 mm, complete all as per specified and as directed by Engineer-in-charge.
Dismantling mild steel work of any description not otherwise provided for complete all as specified and directed by Engineer-in-Charge.
S&F framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering, doors etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete Fe-290 (Grade E-165), complete all as specified and as directed by Engineer-in-charge.
S&F 30 mm thick 2nd class hardwood flush door shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides, complete all as per specified and as directed by Engineer-in-charge.
M&L for 35mm thick 2nd class hard wood made at site plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers, supplied and fitted to chowkats, complete all as per specified and as directed by Engineer-in-charge.
M&L for 35mm thick II nd class hard wood made at site glazed and skeleton shutters, open rebated and prepared to receive glass, guaze, etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc. sizes of members of shutters as specified in SSR Part-I, Section 8, clause 8.20(a); supplied and fitted to chowkhats, complete all as per specified and as directed by Engineer-in-charge.
S&F 30mm thick 2nd class hardwood glazed and skeleton window shutter open rebated and prepared to received glass gauge with sash bars edge of framing plain chamfered or round , fitted with cut and mitred bends for securing glass gauge etc but devided into squares, with plain,chamfered or rounded, mitred and rebated sash bars, any numbers provided with styles and rails etc size of member of shutters as specified in SSR part-I sec-VIII clause 8.24 ( b) fitted to chowkats, complete all as per specified and as directed by Engineer-in-charge.
S&F Solid PVC Door Frame of Size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S Square tube, supplying and fixing in opening, complete all as per specified and as directed by Engineer-in-charge.
S&F factory made solid panel PVC door shutter 30mm thick consisting of frame made out of MS tubes for top & bottom rails MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the MS frame welded / sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement, complete all as per specified and as directed by Engineer-in-charge.
M&L for mild steel flat iron as in hold-fast fixed to door/window chowkat, complete all as per specified and as directed by Engineer-in-charge.
M&L for PCC type C-1, 1 3:6 (20mm graded stone aggt) for cills, hold fast filling of hollow of pressed steel door frame etc, complete all as per specified and as directed by Engineer-in-charge.
M&L for 150mm long aluminium barrel tower bolts, of extruded section and fixed, complete all as per specified and as directed by Engineer-in-charge.
M&L for 125mm long aluminium barrel tower bolts, of extruded section and fixed, complete all as per specified and as directed by Engineer-in-charge.
S&F for 100mm long butt hinges, medium weight, cold rolled mild steel, and fixed, complete all as per specified and as directed by Engineer-in-charge.
S&F for 75mm long butt hinges, medium weight, cold rolled mild steel, and fixed, complete all as per specified and as directed by Engineer-in-charge.
M&L for 150mm long aluminium pressed handles, cast type anodised, complete all as per specified and as directed by Engineer-in-charge.
M&L for 125 mm long aluminium pressed handles, cast type anodised, complete all as per specified and as directed by Engineer-in-charge.
S&F for Aluminium anodised sliding door bolts of size 300mm long, with hasp & staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extreded sections or cast aluminium alloy, complete all as per specified and as directed by Engineer-in-charge.
S&F in repairs 20mm dia curtain rod CP but of anodised aluminium alloy with fixing brackets, stops, nobs, rollers etc., complete all as per specified and as directed by Engineer-in-charge.
Dismantling of boarding of any description fixed in any position with nails, complete all as per specified and as directed by Engineer-in-charge.
S&F 40mm thick 2nd class hardwood planed one side with tongued and grooved joints and fixed with nails as in floors, complete all as per specified and as directed by Engineer-in-charge.
S&F 20mm thick 2nd class hardwood planed one side with butt joints as in shelves of cupboards, racks and pelmets, partitions, eaves board and skirting work fixed with nails, complete all as per specified and as directed by Engineer-in-charge.
Dismantling timber scantling 40 Sqcm & over in section in any position as in unframed work, complete all as per specified and as directed by Engineer-in-charge.
M&L for 2nd class HW scantlings clean sawn in timber fixed work, complete all as per specified and as directed by Engineer-in-charge.
M&L for preparation of wood and wood based materials, new or old surface of any description and girth not otherwise described and treated with two coats of creosote oil, complete all as per specified and as directed by Engineer-in-charge.
M&L for applying two coats of synthetic enamel paint on newly wooden surface over one coat of pink primer of any description, not otherwise described, over 10cm width or grith including preparation of surface, complete all as per specified and as directed by Engineer-in-charge.
M&L for applying two coats of synthetic enamel paint over one coat of red oxide zinc chrome on newly steel surface including preparation of new or previously untreated surfaces of any description, over 10cm width or grith, complete all as per specified and as directed by Engineer-in-charge.
M&L sheet glass, 3mm thick ordinary quality and glazing with oil putty or beadings in square not exc 0.5 Sqm in each pane, complete all as per specified and as directed by Engineer-in-charge.
M&L for sheet glass frosted and glazing with oil putty in sqare n exc 0.5 sqm in each pane, complete all as per specified and as directed by Engineer-in-charge.
Damdoo Bhutia
BHASKAR PRADHAN
KWOK YING CHIU
Darjeeling Enterprises
HIRA SINGH
SANJAY KAUSHIK
REEMA TAMANG AND SONS
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .