Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹14.1 LAccepted-AOC SCO 26 SEC 30 KURUKSHETRA 136118 | KURUKSHETRA | HARYANA | 136118 | ₹14.1 L | L1 | Accepted-AOC accepted |
| 2 | L2₹17.2 L+₹3.0 L (21.4%)Rejected-AOC | ₹17.2 L+₹3.0 L (21.4%) | L2 | Rejected-AOC rejected |
| 3 | L3₹17.3 L+₹3.2 L (22.6%)Rejected-AOC KHASRA NO 183 10 SHYAM VIHAR HISAR HISAR HARYANA 125001 | HISAR | HARYANA | 125001 | ₹17.3 L+₹3.2 L (22.6%) | L3 | Rejected-AOC rejected |
| 4 | L4₹17.6 L+₹3.5 L (24.8%)Rejected-AOC GALI NO 01 NEAR HUNAMAL PAU NEW DEFENCE COLONY ROAD BHIWANI TEHSIL AND DISTRICT BHIWANI 127021 | BHIWANI | BHIWANI | HARYANA | 127021 | ₹17.6 L+₹3.5 L (24.8%) | L4 | Rejected-AOC rejected |
| Sl No | Description | Qty | Unit | modern cooling solution L2 | M/s JSB Enterprises L3 | Pacific Engineers L1 | BHARAT TRADERS L4 |
|---|---|---|---|---|---|---|---|
| 1.00NS Items | |||||||
| 1.01 | Supply, Installation, Testing and Commissioning of double skin type ceiling suspended air handling units complete with extruded aluminium section with 0.6 mm preplasticized/precoated GI sheet outside and 0.6 mm plain galvenised sheet inside, 48 mm thick PUF insulation with thermal break profile , imported DIDW backward/forward curved , AMCA cerified centrifugal blower, vibration isolators, high efficiency EEF1 motors with IP55 protection, class F insulation suitable for 415±10% volts, 50 Hz, 3 phase AC supply, belt driven/plug fans, 6 ROW copper cooling coils with aluminium fins and with Advanced pre-filter (90% down to 10microns).The drain pan shall be constructed out of 18g stainless steel duly insulated including all labour and petty material required to complete the job in all respect up to the entire satisfaction of Engineer-in Charge of the work. Make- Zeco / Edgetech / VTS | 1 | Each | 3,95,000 ₹3,95,000 | 4,26,000 ₹4,26,000 | 2,70,000 ₹2,70,000 Lowest | 4,52,000 ₹4,52,000 |
| 2.00 | Supply, installation testing and commissioning of Air Cooled VRV/VRF units with Rotary/scroll Compressor capable of modulating capacity ,i,e it should be able to vary speed of the compressor as per the varying load conditions and works on R410A with heating and cooling both.The outdoor unit shall be a factory assembled unit housed in a sturdy weather proof casing constructed form rust-proofed mild steel panels coated with powder coated finish. Each ODU should have variable compressors. Each unit shall be equipped, with an oil separator to ensure stable operation with long refrigerant piping.Note:- Variable refrigerant flow modular type air- conditioning system suitable for Cooling/Heating by inverter driven capacity control compressor Outdoor unit having minimum COP at 100% Load to be )4.0 as per ARI Conditions complete in all respect upto entire satisfaction Engineer in charge of work. The manufacturer of ODU and compressor shall be same. i.e the make of compressor shall be identical of the ODU. Makes: Mitsubishi Electric, Daikin, Toshiba, Samsung, O General.Carrier | 1 | Each | 4,50,000 ₹4,50,000 Lowest | 5,30,000 ₹5,30,000 | 4,60,000 ₹4,60,000 | 5,22,008 ₹5,22,008 |
| 3.00 | Supply and Erection of Corded / Cordless Remotes including all labour and petty material required to complete the job in all respect up to the entire satisfaction of Engineer-in Charge of the work | 1 | Each | 5,000 ₹5,000 | 2,500 ₹2,500 Lowest | 2,500 ₹2,500 Lowest | 8,000 ₹8,000 |
| 4.00 | Supply and Erection of Refnet, (Y-Joint ) Set of Suction and Discharge Pipe including all labour and petty material required to complete the job in all respect up to the entire satisfaction of Engineer-in Charge of the work | 1 | P.Set | 6,000 ₹6,000 | 1,500 ₹1,500 Lowest | 1,500 ₹1,500 Lowest | 3,500 ₹3,500 |
| 5.00 | Supply and Erection of SDGT Joint (Gas Tight Joint) for Outdoor Unit including all labour and petty material required to complete the job in all respect up to the entire satisfaction of Engineer-in Charge of the work. | 1 | P.Set | 10,000 ₹10,000 | 1,000 ₹1,000 Lowest | 1,000 ₹1,000 Lowest | 5,000 ₹5,000 |
| 6.00 | Supply, Installation, Testing and Commissioning of Copper Refrigerant Pipe Interconnecting refrigerant pipe work for VRV SYSTEM with 13 mm/19mm thick closed cell elastomeric nitrile rubber tabular insulation between each set of indoor and outdoor units as per VRV specifications and flushing including all labour and petty material required to complete the job in all respect up to the entire satisfaction of Engineer-in Charge of the work.
(ii) 22.2mm O.D (Insulation : 13mm) | 17 | Rmt. | 1,800 ₹30,600 | 1,200 ₹20,400 | 1,200 ₹20,400 | 850 ₹14,450 Lowest |
| 7.00 | Supply, Installation, Testing and Commissioning of Copper Refrigerant Pipe Interconnecting refrigerant pipe work for VRV SYSTEM with 13 mm/19mm thick closed cell elastomeric nitrile rubber tabular insulation between each set of indoor and outdoor units as per VRV specifications and flushing including all labour and petty material required to complete the job in all respect up to the entire satisfaction of Engineer-in Charge of the work. (iii) 19.1mm O.D (Insulation : 13mm) | 10 | Rmt. | 1,600 ₹16,000 | 980 ₹9,800 | 980 ₹9,800 | 800 ₹8,000 Lowest |
| 8.00 | Supply, Installation, Testing and Commissioning of Copper Refrigerant Pipe Interconnecting refrigerant pipe work for VRV SYSTEM with 13 mm/19mm thick closed cell elastomeric nitrile rubber tabular insulation between each set of indoor and outdoor units as per VRV specifications and flushing including all labour and petty material required to complete the job in all respect up to the entire satisfaction of Engineer-in Charge of the work.
15.9mm O.D (Insulation : 13mm) | 20 | Rmt. | 1,400 ₹28,000 | 890 ₹17,800 | 890 ₹17,800 | 750 ₹15,000 Lowest |
| 9.00 | Supply, Installation, Testing and Commissioning of Copper Refrigerant Pipe Interconnecting refrigerant pipe work for VRV SYSTEM with 13 mm/19mm thick closed cell elastomeric nitrile rubber tabular insulation between each set of indoor and outdoor units as per VRV specifications and flushing including all labour and petty material required to complete the job in all respect up to the entire satisfaction of Engineer-in Charge of the work.
12.7mm O.D (Insulation : 13mm) | 5 | Rmt. | 1,200 ₹6,000 | 670 ₹3,350 Lowest | 670 ₹3,350 Lowest | 700 ₹3,500 |
Tender Value
₹17.7 L
EMD Value
₹35,360
Closing Date
22 Oct 2025, 5:00 pmClosed
AMIT GOYAL
ED - Rohtak
Providing HVAC only
2025_HRY_478733_1
20254DB33A45 CD71 4254 B1A0 C091A6A6C258667BAR
Open Tender
Electrical Works
Works
30 days
Rohtak
Technical documents as per approved DNIT conditions.
3 documents required · 3 mandatory
₹1,000
₹35,360
Yes
20 Nov 2025
17 Oct 2025
23 Oct 2025
17 Oct 2025
22 Oct 2025
17 Oct 2025
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 1.14 MB
BOQ_556691.xls
BOQ • 0.29 MB
AD0138471.pdf
Additional Documents • 2.43 MB
OT0138471.pdf
Other Document • 0.70 MB
corrigendum.pdf
PDF • 1.80 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .