Short Term Tender Notice for Reorientation of 33KV G4 and Canal Company Bagh line for interconnection with under construction Receiving Station Company Bagh for Smart City of STD I JPDCL Jammu

Amount

33KV Isolator with earthing blade

MS Chequred plate 8mm

11KV Power cable single core 630mm2

11kV indoor cable termination kit

11kV outdoor cable termination kit

3Cx400 sqmm touch proof cable termination of C-type bushing (conforming as per EN50180/EN50181) Termination kit shall be strictly screened separable cable connector termination (touch-proof)/ inner cone push on type (touchproof) (Raychem make) for 33kV RMU

16 Mtr. Long Pole(ST-410 SP80)

13 Mtr. Long Pole(ST-410 SP69)

GI Channel X-arm including clamps and braces

200 mm² ACSR Conductor

PG Clamps for 200 mm² ACSR Conductor

33 KV Polymer Composite Pin Insulator 36KV, 10KN, Lighting Impulse 170 KV Positive and 180 KV Negative, creepage distance 900mm

33 KV Polymer Composite Disc Insulator 36 KV, min failing load 70KN, Lighting Impulse 170 KV Positive and 180 KV Negative, creepage distance 900mm (with complete fittings)

Galvanized Nuts and Bolts.

Danger Plates with Clamps

Anti-Climbing Device with Clamps

Earthing Complete by GI Pipe 40 mm or GI Rod 20mm 2.5 mtr long through GI Strip.

Red Oxide

Aluminium Paint

Cement bottoming 1:2:4 mix as per REC standards .6cum /pole

Galvanized Stay Set with 50x8mm Stay Clamp, Guy Insulator (2 Nos.), Anchor Plate (300x300x8mm), Nut-Bolts, 2 Nos. Turn-Buckles, 1.8m Long, 20mm Diameter Solid GS stay Rod & 7/4.00mm Dia GI Stranded Wire Complete.

Guard Netting

33kV Power cable 3 core 400 mm2

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centering and shuttering. All work upto Plinth level with: 1:2:4 ( i cement: 2 course sand: 3 graded stone aggregate 20mm nominal size

Providing and laying factory made chamfered edge cement concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parkingetc. Of required strengh, thickness and size/shape made by table vibratory method using PU mould, laid in required colour and pattern over 50 mm thick compact bed of sand, compacting and proper embedding/laying of interlocking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, falling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as per direction of engineer in charge. 80 mm thick C.C Paver Blocks of M30 grade with approved colour design and pattern with PCC 1:2:4

INDUSTRIAL ELECTRICALS (BID ID -2309001)

The Trikuta Engineer (BID ID -2308991)