SPECIAL REPAIR TO OTM BLDG NO T-4/5B OF 133 Inf Bn TA ECO DOGRA AT KUFRI UNDER GE JUTOGH

Amount

Taking down cement or cement lime plaster on brick or stone walls etc including raking out joints, hacking for key, scrubbing down with eater etc, of any height including necessary scaffolding and T&P required to complete the work complete all as specified and directed.

Demolition of brick or stone masonary built in cement mortar including all quoins arches pillars etc but excluding ashlars facing dressed stone work and precast concrete block, complete all as specified and directed.

M&L for brick work with sub class 'B' brick, straight or curved on plan exc 6m mean radius, built in CM 1:6, complete all as specified and directed.

M&L for rendering 15 mm thick on fair surfaces of brickwork or concrete surface in cement mortar 1:6 finished even and smooth without using extra cement at any height complete all as specified and directed.

M & L for rendering 15mm thick on other than fair faces of brick work or concrete surface in CM 1:4 surface finished fair and even mixed with water proofing compound as per manufacturers instruction, at any height complete all as specified and directed. Note: WPC shall be measured and paid separately.

M&L for preparation of new plastered surface of wall and applying two coats of oil bound distemper including priming coat over a coat of 3mm thick wall care putty on plasterred surface complete all as specified and direceted.

M&L for prepartion of newly plastered surface of wall applying two coats of weather proof exterier emulsion paint on external surfaces including a coat of alkali resistant priming paint complete all as specified and direceted.

Supply only liquid water proofing compound complete all as specified and directed.

Dismantling of floor hearth or wall tiling incl cement mortar bedding and removing the rubbish off the premises, complete all as specified and directed.

Dismantling boarding of any description fixed in any position with nails in unframed work compete all as specified and directed.

Demolition of cement concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level, complete all as specified and directed.

Removing unserviceable building material obtained from dismantling/demolition to a distance exc 1.0KM but n.exc 1.50KM and depositing where directed at level not exc 1.5m above the starting point complete all as specified and directed.

M&L for mooram/ red bajri filling in floor or paving laid in layers not exc 15cm thick including spreading, levelling and watering complete all as specified and directed.

M&L for broken stone hard core of gauge n. exc. 63mm deposited, spread and levelled in layer n. exc. 15cm thick watered and rammed to a true surface complete all as specified and directed.

M&L 75mm thick PCC 1:4:8 type D-2 using 40 mm graded crushed stone aggregate as in sub base complete all as specified and directed.

M&L for 75mm thick PCC 1:3:6, type C-2, using 40mm graded crushed stone aggregate as in plinth protection, hard standing etc finished concrete surfaces even and smooth without using extra cement, complete all as specified and directed.

M&L 25mm thick PCC 1:2:4 type B-0 using 12.5mm graded crushed stone aggregate as in sub base of floor complete all as specified and directed.

M&L for Non skid ceramic coloured tiles 7 to 8mm thick (square/rectangular) area of each tiles exceeding 0.06 sqm but not exceeding 0.11 sm, in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 15mm thick screed bed with cement mortar 1:6 complete all as specified and directed.

M&L for Glazed ceramic coloured tiles in vertical surface 350x250mm/ 450X 350X 6-7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match laid over over 10mm thick rendering in cement mortar 1:4 etc complete all as specified and directed.

M&L for Non skid ceramic coloured tiles 7 to 8mm thick (square/rectangular) area of each tiles exc 0.18 sqm but not exc 0.38 sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 15mm thick screed bed with cement mortar 1:6 complete all as specified and directed.

M & L for chequered cement concrete tiles rubber moulded pre polished with lacquar finish 30cmx30cmx22-25mm thick, set, jointed and pointed in neat cement slurry with grey cement and pigment in floors laid over and incl 20mm thick screed bed in CM 1:6 complete all as specified and directed.

Dismantling timber scantling, framed/unframed work of size 40 sqcm and over in section, in any position in any position with nails etc complete all as specified and directed.

Dismantling of fillets, rails, posts, rafters, purlins etc. under 40 Sqcm in section in any position fixed with nails complete all as specified and directed.

M&L 2nd class hard wood plain fillet square or rectangular in section clean sawn sectional area exc 13sqcm and n. exc. 25 sqcm secured with nails or barbs complete all as specified and directed.

M&L for IInd class hard wood timber scantling wrought secured with nails timber framed and fixed in framed work complete all as specified and directed

S&F 25 mm thick 2nd class hard wood boarding planed one side with butt joints and fixed with nails as in roof, ceiling, partition, facia, barge, soffit etc (except flooring and skirting) and in repair to replace old and or decayed boarding in patches incl cutting out old, piecing, heading joints etc complete all as specified and directed.

Dismantling plain or corrugated steel sheeting any gauge, thickness, including nainital or similar pattern in roof covering, compete all as specified and directed.

S & F 0.63 mm thick galvanized, corrugated mild steel sheeting with two corrugation side lap fixed with 'L' or 'J' type hooks and washers in roofs with grade of Zinc coating 120 gm per sqm complete all as specified and directed.

S&F plain, galvanised, 0.63mm thick,mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for truss/purlin/rafter compete all as specified and directed.

M&L for MS Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc of Fe-410-W (Gde-E-250) quality B, compete all as specified and directed.

S&F framed work such as grills, gratings, etc.,with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladder; framed baluster; walk ways; railing; framework of watertanks staging and similar work conforming to Fe-290. Gde-E-165 compete all as specified and directed.

M&L for applying two coats of synthetic enamel paint over a coat of red oxide primer on new steel surfaces of any description over 10cm wide or girth incl preparation of surface etc., compete all as specified and directed.

M&L for applying one coat of synthetic enamel paint on previously treated steel surfaces of any description over 10cm wide or girth incl preparation of surface compete all as specified and directed.

Dismantling wall and ceiling boards or insulation boards any thickness, any description including cover fillets compete all as specified and directed.

M & L 4mm thick non asbestos fibre cement building boards (E board designer with PVC white coating) fixed or laid /inserted to timber/GI/Aluminium frame work with screws in ceiling flat or sloping compete all as specified and directed.

M&L for GI frame work of size 605 x 605 mm for seamless ceiling comprising of GI perimeter channel 0.55 mm thick with two unequal flanges of 20 and 30mm and web of 27mm fixed to surrounding wall using nylon sleeves and screws at 450mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx. 900 mm centre to centre with GI cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457mm centre to centre compete all as specified and directed.

S&F hangers 6mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long compete all as specified and directed.

S & F Solid PVC Wall Lining consisting of 5mm thick single side prelam wood grain printed PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing complete all as specified and directed.

S&F 5mm thick PVC sheet fillet of width 35mm for wall and false ceiling inclusive of fixing on to wall to make PVC Frame as per specification and drawing complete all as specified and directed.

Taking down chowkhats or frames n exc. 1.5 sq. m each with shutter (without taking off shutters from the frames) and removing from site compete all as specified and directed.

Taking down chowkhats or frames exc. 1.5 sq. m but n.exc 4 sqm each with shutter (without taking off shutters from the frames) and removing from site compete all as specified and directed.

S&F Factory made panel PVC door shutter 30 mm thick (style) consisting of frame made out of M S tubes for top & bottom rails M S frame shall be covered with heat moulded plain colour PVC ‘c’ channel having a PVC sheet strip of 20 mm width struck inside with solvent cement for stiles and plain colour pick sheets for top rail, lock rail & bottom rail on either side and as gap insert for top rail & bottom rail, Paneling of colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles and rails with suitable pick sheet beading and jointed together with solvent cement compete all as specified and directed.

S&F Solid PVC door frame of size 50mm x47mm made out of 5mm thick plain coloured PVC sheet reinforced with M.S. Square tube, compete all as specified and directed.

M&L for IInd class hard wood plain, solid, straight chowkhats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, complete all as specified and directed.

S & F MS band straps, clamps, hold fasts, wind ties, fillets etc and similar small articles confirming to Fe 290 Gde E-165 complete all as specified and directed.

M & L for providing PCC 1:2:4, type B-0, using 12.5mm graded crushed stone aggregate as in hold fast blocks, copping etc incl form work complete all as specified and directed.

S&F 2nd class H.W factory made paneled shutters 35mm thick (any number of panel) with panels of timber flat on both sides (feather edged) or of veneered particle board medium density, wood particle board with commercial face veneers complete all as specified.

S&F 2nd class hardwood Glazed and skeleton shutter 35 mm thick, open rebated and prepared to receive glass, gauge etc, (without shas bar), edges of framing plain or rounded fitted with cut and mitred beads for securing glass etc size of members of shutters as specified in SSR Part-I section 8 clause 8.20(a) supplied and fitted to chowkat etc compete all as specified and directed.

S&F 2nd class hardwood Glazed and skeleton shutter 30mm thick, for window, ventilator etc open rebated and prepared to receive glass, gauge etc, divided into pannels with shas bar, edges of framing plain or rounded fitted with cut and mitred beads for securing glass etc size of members of shutters as specified in SSR Part-I section 8 clause 8.20(b) supplied and fitted to chowkat etc compete all as specified and directed.

S&F galvanised mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks or galvanised wire staple including wooden beading complete all as specified and directed.

S&F sheet glass 4mm thick ordinary quality and glazing with oil putty or wooded bead built in squares not exceeding 0.5 sq.m in each pane, compete all as specified and directed.

S&F sheet glass 4mm thick Figured glass, pin head type and glazing with oil putty or wooden bead in squares n exc 0.5 sq. m in each, compete all as specified and directed.

S&F in repair block board 18/19 mm thick, grade 2 quality, 'interior grade', decorative type with decorative face veneer on one face, fixed with nails/ screws sin cup board shutter/ pelmets etc. or to timber frame work, including 6mm thick teak wood lipping complete all as specified and directed

S& F Continuous (piano) hinges , mild steel , bright finish or electro galvanised with 30 mm flaps complete all as specified and directed.

S&F Hasp and staple 100mm safety type, aluminium anodised with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified and directed.

S&F 40mm dia mild steel cupboard knob fixed with nut, screw and washer of mild steel bright finished complete all as specified and directed.

S&F butt hinges 100 mm size medium weight cold rolled mild steel compete all as specified and directed.

S&F butt hinges 75 mm size medium weight cold rolled mild steel compete all as specified and directed.

S&F aluminium handles, cast type, anodised 150 mm size compete all as specified and directed.

S&F aluminium handles, cast type, anodised 125 mm size compete all as specified and directed.

S&F 200mm aluminium anodised barrel tower bolt of extruded section and fixed, compete all as specified and directed.

S&F 150mm aluminium anodised barrel tower bolt of extruded section and fixed, compete all as specified and directed.

S&F 300 mm long aluminium alloy, anodised sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed complete all as specified and directed.

S&F in repairs 300 mm, MS ordinary rat tail rod pattern spring incl roller& roller plate & welding if necessary complete all as specified.

S&F butt hinges 50mm size medium weight cold rolled mild steel compete all as specified and directed.

M&L for 2nd class hard wood small fittings such as brackets of any type, latch & hinge blocks, shaped door & window stops & the like including all necessary labours, articles n exc 200 cucm each compete all as specified and directed.

M&L for preparing new or previously untreated surfaces of wood and wood based materials of any description over 10 cm in width or girth and applying two coat of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

M&L for preparing old painted surfaces of wood and wood based materials of any description over 10 cm in width or girth and applying one coat of synthetic enamel paint compete all as specified and directed.

S&F rotational moulded polyethylene water storage tanks (cylindrical vertical type with closed top) of 1000 litres capacity, triple layered, marked embosed, hoisted and fixed in position with and incl new float valve 20mm dia, including connecting up pipes and dismantling of existing unserviceable tank compete all as specified and directed.

S&F 20mm bore ball brass valve high pressure with polythelene float and fly nut complete screwed for ironcomplete all as specified and directed

S&F 21-22 inch dia galvanised mild steel pan (Tasla/ ghamela) not less than 1mm thick with for 04 Nos bolt of 5-6mm dia, 8 Nos nut & washer including fixing on water storage tank as tank cover complete all as specified and directed.

Taking up or down steel tubing and connections 15mm bore including cleaning for refixing or removal from site compete all as specified and directed.

Taking up or down steel tubing and connections 20mm bore including cleaning for refixing or removal from site compete all as specified and directed.

M&L for cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth compete all as specified and directed.

S&F 15mm bore mild steel galvanised tubing medium grade galvanised ISI marked with all fittings such as bends, elbows, tees, short pieces, connections, backnuts, diminishing pieces, caps, plugs and unions etc and fixing with wall hooks, wooden plugs etc and cutting, screwing and waste including cutting through walls, floors etc and making good the disturbed surfaces complete to wall and ceilings or laid in floors compete all as specified and directed.

All as per item No.76 above but 20mm bore of pipe compete all as specified and directed.

Refixing 15mm bore old Steel water tubing and connections of all new fittings like elbow, tee, socket, bend etc and fixed to wall, ceiling or laid in floor complete all as specified and directed.

Refixing 20mm bore old Steel water tubing and connections of all new fittings like elbow, tee, socket, bend etc and fixed to wall, ceiling or laid in floor complete all as specified and directed.

S&F in repair 20mm dia gun metal globe or gate valves with iron wheel head, screwed both ends for iron pipe complete all as specified and directed.

S&F PVC connection 15 mm size with PTMT nuts of length 450mm long compete all as specified and directed.

S&F in repairs glass shelf assembly consisting of 5.5 mm thick sheet glass shelf 12 cm wide with chromium plated bracket guard and railing 60 cm long, compete all as specified and directed.

S&F in repairs 15mm dia stop valves, cast copper alloy, screwed down, high pressure, with crutch or butter fly handle, fancy type, chromium plated, with long shank and cup (concealed type) screwed both ends for iron pipe compete all as specified and directed.

S & F in repair brass chromium plated tubular towel rail ‘D’ type 60cm long between flange, compete all as specified and directed.

S&F in repair 15 mm bib tap fancy type cast copper alloy chromium plated long body with crutch with butter fly handle, screwed for iron pipe or brass ferrule, compete all as specified and directed.

S & F in repair 15mm dia brass CP wall mixer for mixing hot & cold water screwed down for iron pipe compete all as specified and directed.

S&F in repair of vitreous china wash down water closet pan (pedestal pattern), white, incl suitable trap, plastic water closet seat cover closed pattern with flat bottom and cover, mild steel chromium plated or aluminized hinging device including connection to drain (or outgoing pipe) and to flushing pipe, anti syphonage pipe incl jet and connection, complete all as specified and directed.

S&F in repair PVC valve less, syphonic action type low level flushing cistern, white with inlet ball valve , float handle, including brackets 10 ltr capacity including 32 mm PVC flush pipe complete all as specified and directed.

S&F in repair vitreous china wash hand basin white flat back of size 550x400mm excluding tap waste pipe chain and plug but including brackets, CP brass coupling and PVC waste pipe complete, all as specified and directed.

S & F in repair 15mm dia chromium plated brass central hole wash basin mixer with accessories in wash basins for mixing hot and cold water, screwed down for 15 mm bore GI pipe complete all as specified and directed.

S & F in repair 110mm bore PVC (SWR) Pipes single socketed in any length with rubber ring joints , fixed to wall compete all as specified and directed.

S & F in repair 110mm bore PVC (SWR) Pipes single socketed in any length with rubber ring joints, laid in trenches compete all as specified and directed.

S & F in repair 75mm bore PVC (SWR) Pipes single socketed in any length with rubber ring joints , fixed to wall compete all as specified and directed.

S & F in repair PVC (SWR) bends in any radius 110 mm bore with access door compete all as specified and directed.

S&F in repair PVC (SWR), junction single, (Single T) equal or unequal 110 mm bore fixed with approved adhesive complete all as specified and directed.

S & F in repair PVC (SWR) bends in any radius 75 mm bore with access door compete all as specified and directed.

S&F in repair PVC (SWR) Vent cowl 110 mm bore compete all as specified and directed.

M&L for 20 mm dia mild steel coloured PVC coated fancy curtain rod fitted in MS coloured bracket complete all as specified and directed.

M&L for mild steel coloured brackets including PVC designer dom for curtain rod complete all as specified and directed.

Taking down carefully aluminium point wiring (light, Socket or power) complete including fittings and fixtures such as switches, ceiling roses pendents, regulators, sockets etc for taking credit to be measured separetly including making good the disturbed portion/surface complete all as specified and directed.

M&L for Point wiring with colour coding multistranded copper conductor cable, PVC insulated (FRLS) and unsheathed size 1.5sqmm drawn in and including PVC casing N caping with fixing accessories, for one light/fan/bell point controlled by one switch with pressed steel concealed terminal boxes covered with 3mm thick laminated sheet/modular with all fittings (ISI Marked) incl continous earth wire of PVC insulated unsheathed multi stranded copper conductor cable size 1.5 sqmm for earth wire conncected to common earth dolly complete all as specified and directed.

All as per item No 102.00 above but for one 3/5 pin socket 5 Amp on same board, with 1.5 sqmm wire with 1.5 sqmm earth wire complete all as specified and directed.

All as per item No 102.00 above but for one 3/5 pin socket 5 Amp on independent board with 2.5 sqmm wire and 2.5sqmm earth wire complete all as specified and directed.

All as per item No 102.00 above but for 3 pins socket outlet 15 Amps independent with 4 sqmm wire incl continous earthing with multistandred copper conductor PVC insulated unsheathed size 4sqmm complete all as specified and directed.

S&F switch piano, flush type, 5/6 Amps, single pole complete all as specified and directed.

S&F socket 3/5 pins combined, 6 Amp, flush type (multi purpose), 230volt complete all as specified and directed.

S&F switch piano, flush type, 15/16 Amps, single pole complete all as specified and directed.

S&F socket 3/5 pins combined, 15/16 Amp, flush type (multi purpose), 230volt complete all as specified and directed.

S&F ceiling rose, PVC / Polycarbonate isolated body ,surface backlite, 65x50mm, three terminals complete all as specified and directed.

S&F angle lamp holder PVC/Polycarbonate base / back suitable for LED lamp with and incl provn of LED Bulb 9W B-22 Pin type complete all as specified and directed.

S & F in repairs LED tube light along with fixture, 20W(4 feet) wall mounted LED batten, extruded PVC, heat sink provided for efficient heat dissipation & integrated electronic driver, optics diffused, complete all as specified and directed. Make : BAJAJ cat part no:BCLSB 20 WH/ Havells cat part no: LUMILINEBS20WLED865SPCWH/ CG cat part no : LCTL-18-CDL

S&F LED 6000K (2’ feet), 10W decorative LED lighting fixture with extruded PVC heat sink, environmental friendly, energy efficient ready to use pack, complete and including taking down unserviceable fittings complete all as specified and directed. Make :- BAJAJ cat part no:BCLSB 10 W/ Havells cat part no: LUMILINEPLUSBS9WLED865SPCWH/ CG cat part no : LCTL-9-CDL

S&F LED building secuity light 25 watt, incl bracket as per suitable size and all connected accessories ( clamps, nut, bolt etc)complete and including taking down existing fittings complete all as specified and directed. Make : BAJAJ cat part no:BCLST 25W LED I V2/ Havells cat part no: ENDURAPEARLSL25WLED757SASYTOPCMP/ CG cat part no : LSTS-25-CDL.

S & F in repairs single pole and neutral sheet steel powder coated Distribution board for MCBs fitted with bus bar , Neutral link ,Earth Bar and Din rail suitable for use on 240 V, 50 Hz supply double door SP&N DB system 12 ways complete all as specified and directed.

S&F MCB SPN 40 Amps 240V incl all termnials, fitting 'B' curve complete all as specified and directed.

S&F MCB SP 06 to 40 Amps 240V incl all termnials, fitting 'B' curve complete all as specified and directed.

S&F exhaust fan, MS body, 280/300mm sweep, 900 RPM including fixing arrangement with fastner, nut , bolt, washers etc complete with louver shutters and making hole of suitable size for fixing the exhaust fan including taking down old unserviceable fan and deposited to AGE E/M store yard and making good disturbed surface as per existing finishes complete all as specified and directed.

S & F 25 Ltrs capacity, water heater storage type electric supplied and installed with 5 star rating, 8 bar pressure, vertical mounted with all accessories and fittings complete all as specified and directed.

M&L for earthing complete with galvanised steel earth plate electrode 600 x 600 x 6.3 mm thick burried directly in gorund (earth pit not less than 2.25 Mtr normal ground level),and top edge of earth plate not less than 1.5 mtr below normal ground level, connected to galvanised means of earth wire 4 mm dia with bolts, nuts & check nuts, and washers of galvanised iron protection pipe light grade of 15 mm dia and watering pipe medium grade of 20 mm dia and filled with alternate layer of charcoal and common salt, watering funnel with wire mesh, earth pit chamber and cover CI frame PCC 1:3:6 type C-2 all as shown in electrical plate No-3 of SSR part-I of 2009 connected to earthing test point all as specified and indicated including all earth work excavation, returning filling and disposal of surplus soil and testing on completion complete all as specified and directed.

S&F Air termination, single pointed, copper rod 12mm dia and 300mm long with necessary fixing arrangement on roof complete all as specified and directed.

S&F Aluminium strip 25 x 3.15mm with saddles and fixing screws etc. for roof conductors and down conductors above ground complete all as specified and directed.

S&F GI strip 32 x 6mm with saddles and fixing screws etc. for roof conductors with rubber and bitumen washer and fixed to porcelain insulator on wall for down conductor complete all as specified and directed.

S&F test point terminal block made of phosphorus bronze size 75x75x25mm drilled and screwed including 3 nos. 8mm dia 25mm long hex. head screw fixed to copper strip bracket and fixed to porcelain insulator on wall complete all as specified and directed.

S&F GI pipe light grade of size 40mm dia laying in trenches/ under floor/PCC foundation/on walls for protection of strip including welding, clamp, nut and bolt as required complete all as specified and directed

JASWANT SINGH ANAND

M/S Jaswant Kumar Aggarwal

NIRMAL SINGH BHOGAL AND SON

AUKTA ENERGY PRIVATE LIMITED