PROVN OF 32 x 25/50 LTR CAPACITY OF GEYSERS FOR JCOs/OR MD ACCN OF MH AND SPL REP TO LT PANEL/FEEDER PILLAR AND ALLIED EXTERNAL ELECTRIFICATION WORKS AT MIL STN GAYA

Amount

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), and rubbish off the premises

Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc

Supplying and laying CPVC pipes 20 mm outer dia SDR 11 & Male & Female Brass Threaded Adaptor (MFTA & MTA/ MBTA & MFBTA) CPVC SDR 11 fittings on walls/ceiling or laying in floors incl necessary chase cutting complete all as specified

Supplying and laying CPVC pipes 25 mm outer dia SDR 11 & Male & Female Brass Threaded Adaptor (MFTA & MTA/ MBTA & MFBTA) CPVC SDR 11 fittings on walls/ceiling or laying in floors incl necessary chase cutting complete all as specified

Supplying and laying CPVC pipes 32 mm outer dia SDR 11 & Male & Female Brass Threaded Adaptor (MFTA & MTA/ MBTA & MFBTA) CPVC SDR 11 fittings on walls/ceiling or laying in floors incl necessary chase cutting complete all as specified

S & F Pillar taps 15 mm bore, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe

S & F Stop valves/angle valves 15 mm bore, fancy type chromium plated cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions.

S & F Stop valves 15 mm bore, chromium plated with long shank and cup (concealed type) fancy type cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions

S & F Gun-metal, globe or gate valves 25 mm dia, with iron wheel head, screwed both ends for iron pipe

S & F Rotational moulded polyethylene water storage tank (Cylindrical vertical with closed top) hoisted and fixed in position 500 ltrs capacity complete.

S & F Ball brass valves 25 mm dia, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule

S & F Bib taps 15 mm bore, chromium plated and fancy type long body cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule Make Prayag/Plumber/ESSCO/Parryware

Disconnecting existing tanks, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position.

S & F CPVC Tank Adaptor 32 mm outer dia complete.

M & L Brick work using old size fly ash bricks straight or curved on plan exc 6 m mean radius built in cement mortar 1:6 complete

M & L Screed bed or bedding layer of mortar 10 mm thick on roof in CM 1:3 with WPC (Note WPC will be measured and paid seperately)

Supply only water proofing compound (Sika latex powder)

M & L Rendering 15mm thick on brick wall or concrete surface in cement mortar 1:4 finished even and fair without using extra cement with WPC. (Note WPC will be measured and paid seperately)

M &L Glazed ceramic coloured tiles in vertical surface 600 x 300 x 7 to 8mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match including 10 mm thick rendering in cement mortar 1:4 complete

M & L Non skid ceramic coloured tiles of 7 to 8 mm thick (square/ rectangular) polished, area of each tiles exc 0.11 Sqm but n.exc 0.18 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including screed bed or bedding layer of mortar 15mm thick in cement mortar 1:4 complete.

M & L Rendering 10mm thick on brick wall or concrete surface in cement mortar 1:6 finished even and fair without using extra cement complete.

M & L Rendering 15mm thick on brick wall or concrete surface in cement mortar 1:4 and finishing surfaces even and smooth with using extra cement for manhole/Septic tank.

M & L Rendering 5mm thick on concrete surface as in ceiling in cement mortar 1:3 finished even and fair without using extra cement complete.

M&L 1 mm thick of Birla white putty/JK white wall care putty on new plastered surfaces and making the surface uniform & smooth.

M&L Two coats of distempering with acrylic distemper white or tinted on prepared smooth surface incl preparation of new plastered surfaces complete

M & L Two coats of cement base paint white or tinted on walls or fascia of roof or chajjas on new plastered surfaces of bldg complete all specified & directed.

S&F 75 mm dia. PVC (SWR) multi floor trap with Stainless steel grating including jointing fixed in cement concrete type B-1 (1:2:4) complete.

S&F PVC (SWR) bends any radius of 75mm bore with acess door complete all as specified and directed.

S&F PVC (SWR) junction single, (Single T) equal or unequal any radius of 75mm bore with acess door complete all as specified and directed.

S&F PVC (SWR) pipe single socketed in any length with rubber ring joints laid in trenches or in floors of 75mm dia complete.

M & L Cutting holes into or through cement concrete slabs area n.exc 100 Sqcm, chajjas, etc. reinforced or otherwise and making good surfaces with polymer modified concrete mortar (1:2:4), type B-0 with(Sika latex powder mixed with cement & water) complete.

M&L PCC 1:2:4, type B-1 using 20 mm graded stone aggregate as in coping, benching, bed block, lintel band, drains and channels etc and similar work incl form work.

S &F GI tube 20 mm dia medium grade fixing in wall/trench with bend , elbow ,Tee, etc from existing pipe line up to complete connection for Geyser at site all as specified & directed by the Engr-in- charge.

S & F Flexible connection pipe heavy duty braided hose PVC pipe 600mm long (20 mm dia) of superior quality as per existing pattern with brass union & washer fitted at both end suitable to 20mm GI pipe line complete.

M&L Excavating in trenches, not exceeding 1.5m wide and not exceeding 1.5m in depth, for foundation, etc or for shafts, wells, cesspits, manholes, pier holes, etc not exceeding 10 Sqm on plan and not exceeding 1.5m in depth and getting out in soft/loose soil all etc complete as specified and directed by Engr-in-charge

Returing, filling in, including spreading levelling, watering and well ramming in layers not exc 25 cm, using excavated soil all as specified

Removing surplus earth to distance not exc 50m and depositing where directed at a level n exc 1.5m above the starting point all as specified.

M&L Sand filling in tenches below and above/around UG cable for cable protection including gently punning around cables with river washed and screened clean dry sand, complete all as specified and directed.

Supply and laying in trenches dry well burnt locally available sub class “B” bricks designation 75 over sand cushioning for protection of cable complete all as per specified and directed.

M&L Cutting out concrete block/road, slabs, brick-work or stone masonry (in alternatre coarse) forming toothings for and bonding new work in mortar into old work, including new materials entering old wall for PCC 1:2:4 type B1 using 20mm graded curshed stone aggregate as in complete finishing surfaces and set in CM 1:4

M&L 50 dia galvanised iron tube light grade for cable protection, supporting to poles, plinth protections, road crossings, trenches, footpath etc all as specified and directed including clamps, nut bolts and washers

Supply and Fixing water heater 25 Ltr capacity,230 volt including fixing on wall through proper nut ,bolt,fastener etc with and including wire connected to top plug complete all as specified and directed. Make-bajaj/Havells.

M&L Point wiring with 2.5 sqmm PVC insulated (FR) multistranded, PVC insulated unseathed FR copper conductor cable, and 1.5 sq mm PVC insulated unseathed copper conductor cable as earth continuity conductor connected to common earth dolly all are in separate PVC conduit med grade not less than 20mm dia ISI marked ivory colour, incl. provn of sunken galvanised not less than 1.12 mm thick MS sheet pressed terminal boxes of suitable size & 3 mm thick laminated hylem sheet top cover of required size all as specified and directed by Engr-in-charge.

S &F Switch socket combination 2 in 1, 3 pin,16 amp flush type.

M & L Pug top 15/16 Amp ISI marked. Make: Anchor/Roxy/Havells.

M&L Replacment of Sheet metal enclosure MCCB DBs, Triple pole & neutral 4 way with 200 Amp rated bus bar double door suitable for 01 No incoming MCCB of 100 Amp capacity and 04 Nos Out going MCB SPN up to 40 Amp complete all as specified and directed. Havells/ L&T/Legrand NOTE:- MCCB & MCB's are measured and paid in separate items and same make.

Supply and fix sheet metal enclosure distribution board SPN, 8 ways 240 volts, with 200 amps rated bus bar, with IP 42 protection and double door, suitable for mounting MCBs all as specified and as directed including taking down old MCB DB complete..

S&F in replacement of MCCB 4 pole, 125 Amps with breaking capacity 16 KA, 415 volts complete all as specified and directed. Make : Havells/ L&T /Legrand

Supply and fix MCB single pole & Netural, 240 volts, 63 Amps, all as specified and as directed.

Supply and fix MCB single pole, 240 volts, 40 Amps, all as specified and as directed.

Taking out existing earthing system and M&L Earthing with galvanized steel earthing plate electrode 60 cm x 60 cm 6 mm buried directly in ground (earth pit not less than 2.25 mtr deep being ground level) with top edge of the plate not less than 1.5 mtrs below normal ground level, connecting to a galvanised earth lead wire 4 mm dia by means of bolts, nut check nut and washers protected with and including 15 mm dia light grade GI pipe, necessary excavation and earth work, charcoal and common salt filling, watering arrangement with 20 mm GI pipe light grade including PCC pit with pre cast RCC (1:2:4) cover, GI funnel with test point, testing and commissioning all as specified and directed.

Sub main wiring complete with two runs of 6 sqmm single core PVC insulated unsheathed single core cable 1100 volts grade, multistranded with copper conductor drawn through and including 25 mm dia non metallic rigid PVC conduit and conduit accessories concealed in walls / roofs / floors etc., with one run of 4 Sqmm single core multistranded copper conductor as earth continuity conductor, all as specified inclduing dismantling unseriveable sub main wiring and accessories. Note:- One run of conduit two run of 6 sqmm copper conductor & one run of 4 sqmm copper conductor are measured as one unit.

M&L in replacement of XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 25sqmm 4 core Make-Polycab/Havells/KEI

S &F PVC board size 4' x 4' for fixing of 15 amp switch/socket.

Taking down old u/s ACSR conductor from existing pole

Supply and laying in trenches /laid in floor/duct/drawn through conduit XLPE insulated,screened, PVC bedded, galvanized steel strip or wire armoured heavy duty electric cable 1100V grade with aluminum conductor of cross sectional area 150 Sq mmx 3.5 Core complete alongwith proper thimbling and cable gland as per requirement of site all as specified and directed .

Supply and fix LT overhead lines on existing poles with XLPE insulated AB cable 3 Core x 95 Sqmm + 1 x 70 Sqmm as guard wire including end clamp, hook joint, holding clamps for fixing on poles all etc complete as per site requirement as directed by Engr-in-charge. Make : Kalinga

Supply and laying in trenches /laid in floor/duct/drawn through conduit XLPE insulated,screened, PVC bedded, galvanized steel strip or wire armoured heavy duty electric cable 1100V grade with aluminum conductor of cross sectional area 16 Sq mmx 4 Core complete alongwith proper thimbling and cable gland as per requirement of site all as specified and directed .

Earthing complete with galvanised steel earth plate electrode 60×60cm.× 6mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less'than 1.5 metres below normal ground level, connected to galvanised earth strip 25x4 by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 5 connected to earthing test point all as specified or indicated including testing on completion as directed by Engr-in-charge.

M/s Vinay Kumar

MS HARI MOHAN GUPTA

M/S ABHAY KUMAR AND BROTHERS