MAINT OF INTERNAL ROADS INCLUDING ROAD FURNITURE AND ALLIED ITEMS UNDER AGE B/R-I OF GE 865 EWS LEH

Amount

Repair to potholes and depth, not exc1 sqm each including sweeping free from dust and mud ,or water,scoring sunken surface in roads ,paths etc.cutting around edges to at least 25mm in depth,making good filling in screened and graded road metal,watering and well ramming (including supply of road metal) but makning good by applying tack coat @ 5 kg per 10 Sqm , putting in peremixed bituminous macadam , well rammed and sealed with binder 9.8 kg per 10 Sqm ,blinded with 0.09 cum of stone chippings , 6.3 mm size and again well rammed (including supply of premixed macadam ,binder and chippings depth of potholes exc 30mm complete all as specified and directed.

M & L preparing black top road surface by brushing with wire brushes for removing cracked mud etc. sweeping with brooms & finally fanning the cleared surface with gunny bags to remove all loose dirt etc. complete all are specified and directed

M&L for using paving bitumen & applying evenly a priming/ tack coat with bitumminous primer VG-10 @ 5Kg/ 10Sqm complete all as specified and directed.

M & L bituminus premix semi dense asphaltic cement (SDAC) 40mm thick consolidated thickness but with 5.5% binder content VG-10 by weight of total mix with hot mix plant, rolled and compacted to required camber and gradient using mechanical self propelled paver and rolled with pnuematic vibratory power roller 8 to 12 tones capacity, complete all as specified and directed by Engr-in-Charge. NOTE: (i) Bituminous premix carpet will be carried out by using hot mix plant and mechanical paver only. (ii) Work shall be executed as per design mix as approved by GE. (iii) The binder content specified is minimum. Financial effect of any plus variation in binder content during design mix at site shall be borne by contractor without any extra cost to the government.

Supply and fixing in repair cat eye solar reflective type of metal body alloy of size 100mmx100mmx20mm with PAMA striplens reflector fixed with and including MS Stud of suitable size as per manufacturers instructions complete all as specified and as directed. Make :- DARK EYE/GINNEBO/YASH

M&L for preparing bituminous surfaces of road and marking 2.5 mm thick centre lines, stop lines, dashes ,arrows etc and the like n. exc 15cm wide on roads pavements with hot applied thermo plastic road marking paint of approved colour confirming to BS 3262-1989 with special applicator machine all as per manufacturers instruction complete all as specified and directed

S&F plastic speed breaker made of High Density Poly Ethylene (HDPE) plastic materials size 500 x 370 x 50 mm including fixing metallic bolts are used per peice for installation on road the top surface of the speed breaker should be flat in order to support the vehicles from jerking or skidding and surface dressing for even and levelled surface as in repairs including taking down of existing speed breaker complete all as specified and as directed. Make :- DARK EYE/GINNEBO/YASH

S&F in repair Road ultra mind convex mirror and road safety of size 1000mm dia fixed with stainless steel pole of size 75mm dia with grouting in PCC 1:2:4 in base of minimum height 1.75m above ground level complete all as specified and directed. make : Green lite / dark eye / sinor

S&F in repair Road ultra mind convex mirror and road safety of size 800mm dia fixed with stainless steel pole of size 75mm dia with grouting in PCC 1:2:4 in base of minimum height 1.75m above ground level complete all as specified and directed. make : Green lite / dark eye / sinor

S&F in Repair metal tubular dealineator made out of ABS round body fitted with 2 Nos 65 mm dia highly reflective reflectors made out of PMMA and mounted on 45/50 mm dia mild steel pipe of 600 mm height duly powder coated and thermo plastic elastomer 3 bands of green, red and yellow reflector radium tape of 25 mm wide strips with anti theft steel net for reflector protection including embedding in PCC 1:2:4 (150x150x300mm) type B-1 complete all as specified and directed Make :- DARK EYE/GINNEBO/YASH

S&F in Repair delineators High quality round reflectors fixed on both sides to make it highly visible in poor light condition. (i) Two high performance 100mm dia reflectors and two rectangular reflectors of 70mmx23mmm fixed on both sides of Guide post reflectors positioned at the best distance. the body of Guide post moulded in ABS plastic fixed on powder coated steel pipe of 1010mm height. weight 1760Gms (approx) Make :- DARK EYE/GINNEBO/YASH

S&F in Repair Traffic Cones road safety cones meet world class quality standards made up of high quality LDPE (Low Density Poly Ephyleme) using UV stabilizers, these cones remain unchanged in color in all weather conditions. their bright hues ake them visible from distance . Fitted with highly reflective sleeve these cones can be used for traffic monitoring Quite versatile, these cones are compatilble wiht various types of road safety accessories such as barricade tap, plastic chain , safety light bar message plates, flags etc. Provided with in built heavy rubber base at the bottom these cones remain intact in heavy wide pressure. Main Features.Height 790mm, Weight 3583 Grms, Square Base 395 x 395 Heavy Base complete all as specified and as directed. Make :- DARK EYE/GINNEBO/YASH

Supplying and fixing in replacement MS round delineator 50 mm dia and 900 mm long having 2 no 100mm dia highly reflective reflector made of PMMA and mounted on MS pipe of 50 duly powder coated anti rust and anti theft steel net available in Red/White or Yellow and embedding the same in PCC (1:2:4) type B-1 using 20mm graded stone aggregate, complete all as specified & directed. Make: International Wire Products/Dark Eye/Surya Enterprises/Greenlite/ TATA BP. Note : - Size of PCC block for embedding delineator shall be 10cmx10cmx15cm and cost of the same is deemed to be included in the quoted rate of item.

S&F in repair dual directional reflective cat eye of size 100mm x 100mm of impact resistance ABS plastic stud having ultra violet resistance colour with plastic strip containing 31 mini retro reflective glass beads of colour white/red/yellow to each side and fixed with 12mm dia 120mm long zinc plated steel nails at the centre of cats eye by hammering complete all as specified and directed. Make: Dark Eye /International Wire Products/ Surya Enterprises/Greenlite/TATA BP.

M/S BETONG CONSTRUCTION CO (BID ID -3071953)

Ashfaq Construction Company (BID ID -3072121)

BETONG BUILDERS (BID ID -3056422)