REPAIR / REPLACEMENT OF ROOF, PLASTER, JOINERY, SUNKEN TREATMENT, PLUMBING AND ALLIED WORKS AT RAINA PARK, GURBACHAN SINGH ENCLAVE, DOGRA FARM, CEMETRY LINE AND ROORKEE ROAD ACCN AND OTHER ADJACENT AREA UNDER AGE B/R-II OF GE (NORTH) MEERUT CANTT

Amount

Taking down shutters of any description of size exceeding 1 sqm but not exceeding 2 Sqm each, including builders hard ware fittings complete all as specified and directed.

Taking down chowkats or frames with shutters (without taking off shutter and builders hard ware fittings from frames) not exceeding 1.5 Sqm each, complete all as specified and directed. Note :- Rate also including in this item for necessary cutting down / taking out hold fasts from the existing concrete / brick work and making good the disturbed surfaces with match existing surfaces.

Taking down chowkats or frames with shutters (without taking off shutter and builders hard ware fittings from frames) exceeding 1.5 Sqm but not exceeding 4 Sqm each, complete all as specified and directed. Note :- Rate also including in this item for necessary cutting down / taking out hold fasts from the existing concrete / brick work and making good the disturbed surfaces with match existing surfaces complete all as specified and directed.

Dismantling of floor, hearth or wall tiles / terrazzo including cement mortar bedding (but not backing), removal serviceable tiles to store and rubbish off the premises, complete all as specified and directed.

Demolition of brick work or rubble stone masonry including all quoins arches , pillars etc built in cement mortar and including removal from the site complete all as specified and directed.

Demolition of cement concrete in ground floors and paving not exceeding 15cm thickness(below or above ground level) and including removal of debris & rubbish from the site complete all as specified and directed. Note : Stone slabs / tiles and hard core of any description shall not be measured & paid under this item.

Dismantling of wall or ceiling board (fiber, pulp, insulation etc) any thickness including cover fillets and removal from the site complete all as specified and directed.

Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc and including removal of debris and rubbish from the site complete all as specified and directed.

Hacking out old broken glass (any thickness size quality or description) from wooden frames or stone, concrete or brick surrounds glazed with putty or fixed with bead complete all as specified and directed.

S&F 3mm thick sheet glass, ordinary quality glazing with oil putty or fixed with wooden beads in square not exceeding 0.50 Sqm each pane complete all as specified and directed.

M&L for 15mm thick rendering on fair faces of brick work or concrete surface in cement mortar 1:6 finished even and smooth with out using extra cement complete all as specified and directed.

M&L for 10 mm thick rendering on ceiling in cement mortar 1:3 finished even and smooth without using extra cement complete all as specified and directed.

M&L for applying 15mm thick in cement mortar 1:4 rendering using ready mix plaster bags on brick / concrete surface of external wall finished even and fair complete all as specified and directed. Make : Ultratech, redisplays, Birla Acrocem. Note :- Contractor is required to deposit ready mix bags for 100% CA quantity to Engr-in-Charge with in 15 days of acceptance of contract.

M&L for preparation of old plastered surface of wall and applying two coats of Acrylic exterior Emulsion paint (weather proof painting) using roller complete all as specified and directed.

M&L for preparation of old plastered surface of wall and applying two coats of oil bound distemper using roller complete all as specified and directed.

M&L for preparation of old plastered surface of ceiling and applying one coats of white wash using roller complete all as specified and directed.

S&F plain, framed, panelled shutters (any number of panels), of 2nd class Hardwood (HOLLOCK / CHAMP / SAL) 35mm thick with panels of timber flaton both sides (feather edges), or of veneered particle board medium density, wood particle board with commercial face veneers and fitted to chowkats complete all as specified and directed.

S&F 35m thick glazed and skeleton shutter open rebated and prepared to receive glass gauge etc (without sash bars) edges of framing plain, chamfered or rounded fitted with cut and mitered beads for securing glass/gauze etc, sizes of members of shutters as specified in SSR part I section 8 clause 8.24 (a) of IInd class hard wood complete all as specified and directed.

S&F in repair steel windows with pressed steel frame made out form 1.25mm thick steel with one or more rebate with glazed shutters and fly proofing shutters including guard bars, hinges peg stay handles tower bolts lugs including treated with coal tar / black paint on steel surface in contact / embedded in concrete/masonry work. complete all as specified and directed. Note- Rate also including in this item for making good (to true surface) of disturbed surface of wall.

S&F steel ventilator with top hung shutter including hinges,. Steel peg stay and including treated with tar or coal tar black paint on steel surfaces in contact / embedded in concrete / masonary work complete all as specified and directed. Note- Rate also including in this item for making good (to true surface) of disturbed surface of wall.

S&F in repairs Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or galvanised wire staples including necessary beadings complete all as specified and directed.

S&F Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat molded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Paneling of plain colour PVC sheet to be fitted in the M.S. frame welded/ sealed to the stiles & rails with suitable PVC sheet beading, and joined to gather with solvent cement, supplying & fixing in the frame at site as per specification & drawing on Srl page No 174 of SSR Part-II complete all as specified and directed.

S&F Solid PVC Door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, supplying & fixing in opening as per specification & drawing shown in relevent chapter of SSR Part-II (2020) complete all as specified and directed.

S&F butt hinges of 100 mm size, Medium weight, cold rolled mild steel. complete all as specified and directed.

S&F 250 mm long aluminium anodized, sliding door bolts, with haps staple (bolt type) and fixing clip of sheet cast or extruded section and fixing bolts and sliding bolts not less than 12mm dia of shoot / bolt of extruded section or cast aluminium alloy complete all as specified and directed.

S&F Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or galvanised wire staples including necessary beadings complete all as specified and directed.

S&F 150mm long aluminium anodized barrel tower bolts of extruded section, having shoot / dia of bolt not less than 12mm complete all as specified and directed.

S&F 125mm size extruded aluminium alloy handles, fabricated type, anodised complete all as specified and directed.

S&F in repair Brass chromium plated tubular towel rail 20mm dia , D type 60mmlong between flanges complete all as specified and directed.

M&L for preparation of new wooden surfaces of any description not otherwise described over 10 cm in width or girth and applying two coat of white / tinted synthetic enamel paint over a coat of pink primer complete all as specified and directed.

M&L for preparation of old painted wooden surfaces of any description not otherwise described over 10 cm in width or girth and applying one coat of white / tinted synthetic enamel paint complete all as specified and directed

M&L for preparation of new steel surfaces of any description over 10 cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and directed.

M&L for preparation of old painted steel surface of any description over 10 cm in width or girth and applying one coat of white / tinted synthetic enamel paint complete all as specified and directed

S&F in repair anodized aluminium snap grid frame work for false ceiling suspension system of grid size 605x605 mm complete all as specified and directed.

S&F 4mm thick non asbestos fiber cement building boards fixed or laid /inserted to timber /GI/aluminium frame work with screws complete all as specified and directed.

S&F in repair 18 /19 mm thick prelaminated particle board ,interior grade prelaminated one side with decorative choice lamination & other side balancing white lamination , fixed with screws timber frame and 5mm thick teak wood beads all round to prelaminated boards including piano type hinges of suitable size complete all as specified and directed.

S&F Fe - 290 (Gde E- 165) for Framed work as in doors , chowkhats or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering, support to sign board & fencing post, etc. as specified to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive or steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete all as specified and directed.

M&L in repair granite tiles 20mm thick machine cut bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete all as specified and directed.

M&L for laying 75mm thick PCC 1:3:6 type C-2 (using 40mm graded crushed stone aggregates) as in floor/plinth protection, cement concrete surfaces finished even & fair without using extra cement complete all as specified and directed.

M&L in repair for laying 60 mm thick machine pressed precast PCC colored interlocking paver block molded in PVC frame / mould any shape and size conforming to IS 15658-2006 of M-35 grade of approved design with gray cement and pigment to match shade / colour / matrix of tiles set and bedded over and including 50mm thick fine river washed sand duly compacted with surface vibrator laid over compacted sub soil in flooring complete all as specified and directed. Make : Mehatab tiles, Indore ; Tulip Infrastructure, Saharanpur (U.P)

M&L for laying 75mm thick PCC 1:2:4 type B-2 (using 40mm graded crushed stone aggregates) as in sub base complete all as specified and directed.

S&F in repair 15mm dia pillar tap, cast copper alloy with capstan heads, chromium plated screwed down high pressure with or without lettered 'Hot or 'cold with long screwed shanks and fly nuts screwed for iron pipe complete all as specified and directed.

S&F in repair brass CP hot and cold wash hand basin mixer 15mm bore screwed down high pressure with long screwed shanks and fly nuts, screwed to iron piep complete all as specified and directed

S&F in repair 15mm dia stop valves of cast copper alloy screwed down high pressure with crutch or butter fly handle screwed both ends for iron pipe or for union complete all as specified and directed.

S&F in repair gun metal globe valves, 15mm dia, with iron wheel head, screwed both ends for iron pipes or for unions and fixed in pipe complete all as specified and directed.

S&F in repair gun metal globe valves or gate 20 mm dia, with iron wheel head ,screwed both ends for iron pipes or for unions and fixed in pipe complete all as specified and directed.

S&F in repairs CP bib tap 15mm bore cast copper alloy with crutch butterfly handle, screwed down and screwed for iron pipe or for brass ferrule and fixed as specified and directed.

S&F in repair 15 mm bore bib taps standard of PTMT any colour high pressure screwed for iron pipe or for brass ferrule complete all as specified and directed. (Minimum weight 15mm - 90gms)

S&F in repairs 20mm plug type bib taps, cast iron screwed for iron pipe and fixed complete all as specified and directed.

S&F in repairs 15mm bore pillar taps of PTMT any colour high pressure screwed for iron pipe (minimum weight 15mm- 90grms) complete all as specified and directed.

S&F in repair 15mm bore stop valve of PTMT any colour high pressure screwed for iron pipe (minimum wt 15mm-90grms) complete all as specified and directed.

S&F in repairs 20mm bore ball valve high pressure of PTMT with epoxy coated aluminium red & high density plastic ball screwed for iron pipe (minimum weight 20mm-210grms) complete all as specified and directed.

S&F in repair PTMT grating doom 125mm dia with waste holes (minimum weight 40 grms) complete all as specified and directed.

S&F in repairs towel ring of PTMT fixed with and including C.P brass screws and wooden /plastic cleat complete all as specified and directed.

S&F in repairs PVC connections 15mm size with PTMT nuts of length 600mm complete all as specified and directed.

S&F in repair PVC (SWR) 75mm floor trap, plain with grating including jointing with solvent cement complete all as specified and directed.

S&F GI water tubing 15 mm bore medium grade with all fittings fixed to walls and ceiling or laid in floors including cutting screwing and waste etc including taking down of old inserviceable GI water tubing complete all as specified and directed.

S&F GI water tubing 20 mm bore medium grade with all fittings fixed to walls and ceiling or laid in floors including cutting screwing and waste etc including taking down of old inserviceable GI water tubing complete all as specified and directed.

Dismantling of old water tank exceeding 250 Ltrs & not exceeding 500 Ltrs capacity and Supplied, hoisted and fixed in position any colour rotational moulded polyethylene water storage tanks IS : 12701 - 1996 marked (cylindrical vertical with closed top) of 500 Ltrs capacity complete all as specified and directed.

Dismantling of old water tank exceeding 500 Ltrs & not exceeding 1000 Ltrs capacity and Supplied, hoisted and fixed in position any colour rotational moulded polyethylene water storage tanks IS : 12701 - 1996 marked (cylindrical vertical with closed top) of 1000 Ltrs capacity complete all as specified and directed.

S&F in repairs PVC low level flushing cistern of 10 Ltr capacity symphonic action type with inlet ball valve, float and handle including PVC brackets for mounting of cistern complete all as specified and directed.

Taking down aluminium shutter of size exceeding 1sqm but not exceeding 2sqm and refixing in the same opening after repair in aluminium shutter such as tightening of hinges, loose hanging of shutter, setting of shutter in original position and other similar work etc complete all as specified and directed

S&F in repairs vitreous china squatting pan, Orissa' pattern, size 580 x 440mm white, with integral foot rests with and including cast iron 'P' or 'S' trap and setting the trap and pan in and including PCC 1:4:8, type D-2 minimum 150mm thick all round and finished just below level of rim of pan to receive the floor finishing, making all connections complete all as specified and directed.

S&F in repairs vitreous china WHB, white, flat back size 630x450 mm including cutting for and pinning in ends of bracket or erecting stand with and including angle iron brackets, duly painted with two coats of synthetic enamel paint over one coat red oxide zinc chrome primer and providing cast copper alloy capastan head C.P brass pillar tap fency type 01 No 15mm bore, CP brass waste coupling 32mm dia, PVC waste pipe 32mm dia and PVC connection 450mm long high pressure with PTMT nut complete all as specified & directed.

S&F in repair plastic ciplaplast multipurpose bathroom colored mirror cabinet storage of size 54cm (height),35cm (width) and 13cm (depth) wall mount complete all as specified and directed.

Taking down old existing water proofing treatment with roof tiles of any type from top of RCC/arch slab including taking down of concrete padding or plaster and raking out joints of arch slab and hacking the top of RCC slab, cleaning with water and dispose off rubbish upto 200 meter & M&L for water proofing treatment to existing non-accessible roof slabs by providing 15mm thick screed bedding layer in cement mortar 1:3 mixed with water proofing compound @ 200ml per 50kg of cement consumed or as per manufacturer's instructions and preparing, cleaning new concrete/plastered surface and applying evenly a tack coat @1.20 kg/sqm with 85/25 industrial bitumen over a coat of bitumen primer @ 0.30 liter/sqm and laid with 3mm thick APP modified polymeric water proofing membrance with non-woven polyester rainforced and applying a tack coat of 85/25 industrial bitumen @ 1.2 kg per sqm and finish the surface with aluminium paint at top @ 0.2 kg/sqm as per manufacturer's instructions. Weight of membrane shall not be less than 3.6 kg/sqm unrolled and bonded to substrate with side and end laps 75mm & 100mm as per manufacturer's instructions. complete all as specified and directed. Note :- The WPT work shall be got done through manufacturer's authorised applicator only under strict supervision of manufacturer's technical representative.

M&L colored glazed ceramic tiles in vertical surface 450X350X7mm thick set and jointed in neat cement slurry and pointed in white or colored cement laid over and including 10mm thick rendering in cement mortar 1:4 complete all as specified and directed.

M&L non skid colored ceramic tile 7 to 8 mm thick area of each tile exceeding 0.18 but not exceeding 0.38 Sqm as in floors etc set and jointed in neat cement slurry and pointed in white or colored cement laid over and including 15mm thick screed bed in cement mortar 1:6 complete all as specified and directed.

M&L vitrified ceramic colored tiles 10mm thick (Square/ rectangular) polished area of each tiles not exceeding 0.36sqm in floors etc set and jointed in neat cement slurry and pointed in while or colored cement laid over and including 15mm thick screed bed in cement mortar 1:6 complete all as specified and directed.

M&L vitrified ceramic colored tiles 10mm thick (Square/ rectangular) polished area of each tiles not exceeding 0.36sqm in vertical surfaces such as skirting / dados etc set and jointed in neat cement slurry and pointed in white or colored cement laid over and including 10mm thick rendering in cement mortar 1:4 complete all as specified and directed.

Taking down eaves gutter and rain water pipe and size any pattern PVC /AC pipe including all fittings heads shoes bands etc including removal to store complete all as specified and directed.

S&F 75mm PVC (SWR) pipe single socketed in any length with rubber ring joints fixed to wall complete all as specified and directed.

S&F 110mm PVC (SWR) pipe single socketed in any length with rubber ring joints fixed to wall complete all as specified and directed.

S&F in repairs 75mm bore PVC (SWR) bends any radius complete all as specified and directed.

S&F in repairs 110mm bore PVC (SWR) bends any radius complete all as specified and directed.

M &L for Brickwork with fly ash bricks old size bricks straight or curved on plan exc 6m mean radius built in Cement mortar 1:6 complete all as specified and directed.

Dismantling of timber scantlings 40 Sqcm and over in section in any position unframed work complete all as specified and directed.

S&F in repair stainless steel peg set 8 nose in 45cm length stirrup dia of hooks 6mm complete all as specified and directed.

S&F in repair vitreous china white / colored wash down water closet pan (pedestal pattern) white one piece wall mounted type (including flushing cistern) including connection to drain or outgoing pipe and to flushing pipe antisyphonage pipe etc including UF soft closed seat cover complete all as specified and directed. Make : Jaquar, Cat No LYS-WHT-38851P or equvelent in CERA & Hindware. Note :- The item shall approved from GE before incorporating in the work.

S&F in repair vitreous china colored wash down water closet pan (pedestal pattern) one piece wall mounted type (including flushing cistern) including connection to drain or outgoing pipe and to flushing pipe antisyphonage pipe etc including UF soft closed seat cover complete all as specified and directed

S&F in repairs 8mm dia , brass chromium plated health faucet with 1 meter long flexible hose and wall hook complete all as specified and directed

M&L machine cut kota stone slab flooring 18 to 20mm thick set and jointed in neat cement slurry & pointed mixed with pigment to match the shade of the slab including rubbing and polishing laid over and including 20mm thick screed bed in cement mortar 1:6 complete all as specified and directed.

All as per Srl item No 83.00 here-in-before but as on vertical surfaces such as skirting / dados laid over and including 15mm thick rendering in cement mortar 1:4 complete all as specified and directed.

M&L for preparation of new plastered surface of wall and applying two coats of acrylic exteriror Emulsion paint (weather proof painting)over one coat of primer using roller complete all as specified and directed.

M&L for preparation of new plastered surface of wall and applying two coats of oil bound distemper over 2mmt thick birla white putty using roller complete all as specified and directed.

M&L for preparation of new plastered surface of ceiling and applying three coats of white wash using roller complete all as specified and directed.

Supply only liquid water proofing compound complete all as specified and directed.

B.K.construction

M/S KAPIL ENTERPRISES

veer enterprises

H.B. Traders

VIRAT CONSTRUCTIONS

M/S AGARWAL CONSTRUCTION CO.

FAIR ENGINEERS & CONTRACTORS