Loading
Loading…
Loading…
| # | Company | Amount | Status |
|---|---|---|---|
| 1 | ₹7.4 Craccepted-aoc | ₹7.4 Cr | accepted-aoc |
Tender Value
₹7.1 Cr
EMD Value
₹10.7 L
Closing Date
26 Feb 2026, 9:30 pmClosed
Public Works Department
Development of Nuggikeri and tank rejuvenation works in Dharwad city inluding tank bund improvement, pitching, Compound wall, Entrance plaza, Utility complex, amphitheatre etc
PWD/2025-26/BD/WORK_INDENT22301
PWD/2025-26/BD/WORK_INDENT22301
Open
Buildings
PWD Division Office Dharwada
7 documents required · 7 mandatory
List of existing commitments and ongoing works
List of works for which tenders already submitted
Reports on the financial standing of the tenderer, such as profit and loss statements and auditor’s reports for the last five years
List of Financial Resources with Certificates
Work Done Certificates obtained from the Competent Authorities
The Tenderer should be a PWD Registered Class I & Above contractor
3.2 (b) To qualify for award of this contract each Tenderer in its name should have in the last five years i.e. 2020-21, 2021-22, 2022-23 , 2023-24 & 2024-25 Satisfactorily completed at least 50 Percent of the contract value as prime contractor at least one similar work such as Development of tank /rejuvenation works including tank / water bodies/ bund improvement / pitching, Compound wall / Entrance plaza / Utility complex/ amphitheatre works of value not less than Rs.356.04 Lakhs
3.3) (a) As per this note, each tenderer should demonstrate availability of few key (a) Availability by owning/ Lease/ Hire basis the following key and critical equipment for this work: For Lease/ Hire basis- relevant documents, commitment agreements etc., shall be scanned and uploaded (Minimum 50% of the required Key machinery should be owned by the Tendered. Remaining 50% of the required machinery may be owned / procured on Lease basis / Hire basis. 1).Concrete Batching Plant - (1 Number.- Owned) , 2) Self loading Weigh Batch Concrete Mixer - (2 Number - Owned), 3).Transit Mixer - (1 Number- Owned), 4). Tipper - (4 Number - Owned & 4 Number- Owned/Hired/Lease), 5). Shuttering Materials (Including scaffolding) - (3600/sqm Owned & 3600/sqm Number - Owned/Hired/Lease), 6). Excavator viz JCB / Hitachi - (4 Number - Owned/Hired/Lease), 7). Pin/Plate vibrators - (10 Number - Owned/Hired/Lease), 8). Water Tanker - (6 Number - Owned/Hired/Lease), 9). 20m Hoist - (2 Number - Owned/Hired/Lease), 10). Vibrator Road Roller - (1 Number - Owned), 11). Rock Breaker - (1 Number - Owned/Hired/Lease).
3.3 (b). Liquid assets and or availability of credit facilities of not less than Rs.194.20 Lakhs Credit lines or letter of credit or certificates from the banks for meeting the fund requirement etc. LOC or Letter of Credit should be in prescribed format as per KW-4 Bid Document. if not attached then the tender will not be accepted
3.2 (c) . To qualify for the award of this contract each Tenderer in its name should have in the last five years i.e. 2020-21, 2021-22, 2022-23 , 2023-24 & 2024-25 executed in any one year the following minimum quantities of work 1). Earth work excavation/ Embankment - 18608.62 Cum, 2)Concrete (Including PCC & RCC) - 1427.64 Cum, 3) Steel - 50.38 Tonne , 4) Plastering - 1397.90 Sqm, 5) Tiles- 1276.44 Sqm, 6)BBM/SSM/CC Solid Block/Similar Masonry Walls - 909.72 Cum.
Contact details of contractor Should mention valid Email ID, communication Address, Phone Number
BID Capacity AxNx1.5-B
3.2 (d) The Tenderer should produce work done Certificate of Construction for executing Road works of value not less than Rs. 115.00 Lakhs in any one year amongst 2020-21, 2021-22, 2022-23, 2023-24, & 2024-25
Annual Turnover Certificate along with profit and Loss account statements ITR Returns UDIN is preffered in Turnover Certificate. From 2020-21 to 2024-25
3.2 (a) . Total value of civil engineering construction works executed and payments received in the last five years 2020-21, 2021-22, 2022-23 , 2023-24 & 2024-25 a Achieved in at least Two Financial years a minimum financial turnover in all classes of civil engineering construction works only of Rs. 1424.16 Lakhs. with UDIN number
Total value of civil engineering works executed and payments received in the last five years (year-wise)
₹5,000
₹10.7 L
26 Feb 2026
10 Feb 2026
27 Feb 2026
23 Feb 2026
21 Feb 2026
FOR TENDERS upto RS.10.00 CR 891.80
Tender amount 71207213.31 712.08 For Milestone 1: 21362.16 Rs. per day
EMD 1.5% 1068108.20 1069000 For Milestone 2: 21362.16 Rs. per day
Completion period 11.00 100000 For Milestone 3: 28482.89 Rs. per day
Annual turnover 1424.16 969000
Similar nature work 356.04 0.00
LOC Liquidity assets 194.20
Estimated quantities
Electrical work Amt 8074921.64
Order Item Details Floor/Lift No. Base Rate Final Rate (Excluding GST) Quantity Net Amount (Excluding GST) Actions 80% 15%
1 Category : Vol - 3 -Chapter -2- SITE CLEARANCE --- 595 624.75 30 18742.5 24 0.03
Item Code : 2.1.a.i 0 0.00
Item Description : Cutting of Trees, excluding removal of stumps and roots of trees - Girth from 300 mm to 600 mm. Ref to MoRT&H : IRC - 201 0 0.00
Unit : each 0 0.00
Rate Analaysis Performed ?: Yes 0 0.00
2 Category : Vol - 3 -Chapter -2- SITE CLEARANCE --- 946 993.3 20 19866 16 0.03
Item Code : 2.1.a.ii 0 0.00
Item Description : Cutting of Trees, excluding removal of stumps and roots of trees - Girth from 600 mm to 900 mm. Ref to MoRT&H : IRC - 201 0 0.00 E/W 18608.62 Cum
Unit : each 0 0.00
Rate Analaysis Performed ?: Yes 0 0.00
3 Category : Vol - 2 -Chapter -19- Dismantling & Demolition 0 2426 2547.3 21.2 54002.76 16.96 0.08 STEEL 50.38 Tonne
Item Code : 19.3 0 0.00
Item Description : Demolishing R.C.C. work manually/ by mechanical means including stack- ing of steel bars and disposal of unserviceable material to the appropriate disposal area as per direction of Engineer-in-charge. 0 0.00 BBM 909.72 Cum
Unit : m³ 0 0.00
Rate Analaysis Performed ?: Yes 0 0.00
4 Category : Vol - 2 -Chapter -19- Dismantling & Demolition 0 1684 1768.2 31.86 56334.85 25.488 0.08 Plastering 1397.90 Sqm
Item Code : 19.9.2 0 0.00
Item Description : Demolishing stone rubble masonry manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material to the appropriate disposal area as per direction of Engineer- in-charge. In cement mortar 0 0.00 Flooring 1276.44 Sqm
Unit : m³ 0 0.00
Rate Analaysis Performed ?: Yes 0 0.00 PCC/RCC/PQC 1427.64 Cum
5 Category : Vol - 2 -Chapter -19- Dismantling & Demolition 0 104 109.2 50 5460 40 0.01
Item Code : 19.43.1 0 0.00
Item Description : Dismantling G.I. pipes (external work) including excavation and refilling trenches after taking out the pipes, manually/ by mechanical means in- cluding stacking of pipes to the appropriate disposal area as per direction of Engineer-in-charge. 15 mm to 40 mm nominal bore 0 0.00
Unit : m 0 0.00
Rate Analaysis Performed ?: Yes 0 0.00
6 Category : Vol - 2 -Chapter -19- Dismantling & Demolition 0 114 119.7 100 11970 80 0.02
Item Code : 19.43.2 0 0.00
Item Description : Dismantling G.I. pipes (external work) including excavation and refilling trenches after taking out the pipes, manually/ by mechanical means in- cluding stacking of pipes to the appropriate disposal area as per direction of Engineer-in-charge. Above 40 mm nominal bore 0 0.00
Unit : m 0 0.00
Rate Analaysis Performed ?: Yes 0 0.00
7 Category : Vol - 2 -Chapter -19- Dismantling & Demolition 0 288 302.4 50 15120 40 0.02
Item Code : 19.44.1 0 0.00
Item Description : Dismantling C.I. pipes including excavation and refilling trenches after taking out the pipes, manually/ by mechanical means breaking lead caulked joints, melting of lead and making into blocks including stacking of pipes & lead at site to the appropriate disposal area as per direction of Engineer-in-charge. Up to 150 mm diameter 0 0.00
Unit : m 0 0.00
Rate Analaysis Performed ?: Yes 0 0.00
8 Category : Vol - 2 -Chapter -19- Dismantling & Demolition 0 233 244.65 75 18348.75 60 0.03
Item Code : 19.46.1 0 0.00
Item Description : Dismantling asbestos cement pressure pipes including excavation and refilling trenches after taking out the pipes manually/ by mechanical means and stacking the pipes to the appropriate disposal area as per direction of Engineer-in-charge.Up to 150 mm diameter 0 0.00
Unit : m 0 0.00
Rate Analaysis Performed ?: Yes 0 0.00
9 Category : Vol - 3 -Chapter -2- SITE CLEARANCE --- 2777 2915.85 12.44 36273.17 9.952 0.05
Item Code : 2.13.A 0 0.00
Item Description : Steel Work in all types of sections upto a height of 5 m above plinth level excluding cutting of rivet. - Including dismembering 0 0.00
Unit : t 0 0.00
Rate Analaysis Performed ?: Yes 0 0.00
10 Category : Vol - 3 -Chapter -2- SITE CLEARANCE --- 97 101.85 125 12731.25 100 0.02
Item Code : 2.24 0 0.00
Item Description : Dismantling of Fencing - Dismantling of barbed wire fencing/ wire mesh fencing including posts, foundation concrete, back filling of pit by manual means including disposal of dismantled material with all lifts and lead, stacking serviceable material and unserviceable material separately. Ref to MoRT&H : IRC - 202 0 0.00
Unit : m 0 0.00
Rate Analaysis Performed ?: Yes 0 0.00
11 Category : Vol - 2 -Chapter -19- Dismantling & Demolition 0 74 77.7 163.5 12703.95 130.8 0.02
Item Code : 19.22.2 0 0.00
Item Description : Dismantling tile work in floors and roofs laid in cement mortar includ- ing stacking material to the appropriate disposal area as per direction of Engineer-in-charge.For thickness of tiles above 25 mm and up to 40 mm 0 0.00
Unit : m² 0 0.00
Rate Analaysis Performed ?: Yes 0 0.00
12 Category : Vol - 3 -Chapter -2- SITE CLEARANCE --- 393 412.65 20 8253 16 0.01
Item Code : 2.5.ii.a 0 0.00
Item Description : Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, including removal and disposal of top organic soil not exceeding 150 mm in thickness. By Mechanical Means using Dozer - In area of light jungle 0 0.00
Rate Analaysis Performed ?: Yes 0 0.00
13 Category : Vol - 3 -Chapter -3- EARTH WORK, EROSION CONTROL AND DRAINAGE --- 50 52.5 500 26250 400 0.04
Item Code : 3.3.i 0 0.00
Item Description : Scarifying Existing Granular Surface to a Depth of 50 mm by Manual Means. Ref to MoRT&H : IRC - 305.4.3 0 0.00
Unit : m² 0 0.00
Rate Analaysis Performed ?: Yes 0 0.00
14 Category : Vol - 1 -Chapter -I- Earth Work --- 102 107.1 2869 307269.9 2295.2 0.43
Item Code : 1.14.1 0 0.00
Item Description : Mechanical Means - Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work. In all kinds of soils Depth upto 3 m 0 0.00
Unit : m³ 0 0.00
Rate Analaysis Performed ?: Yes 0 0.00
15 Category : Vol - 1 -Chapter -I- Earth Work --- 474 497.7 18928.6 9420764.22 15142.88 13.23
Item Code : 1.8 0 0.00
Item Description : Manual Means - Construction of Embankment by excavating the available approved Gravel/ Murrum deposited at a place or borrow pits during or prior excavation with all lifts and lead, transportation to site, spreading, grading to required slope and compacting to meet the requirement complete as per specifications, including cost of labour,rolling,water,all materials,usage& all other appurtenaces required to complete the work. 0 0.00
Unit : m³ 0 0.00
Rate Analaysis Performed ?: Yes 0 0.00
16 Category : Vol - 2 -Chapter -11- Steel and Aluminium Work 0 168 176.4 395 69678 316 0.10
Item Code : 11.34A 0 0.00
Item Description : Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel windows by welding 0 0.00
Unit : kg 0 0.00
Rate Analaysis Performed ?: Yes 0 0.00
17 Category : Vol - 2 -Chapter -11- Steel and Aluminium Work 0 138 144.9 432 62596.8 345.6 0.09
Item Code : 11.26.1 0 0.00
Item Description : Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of approved steel primer. M.S. tube including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. 0 0.00
Unit : kg 0 0.00
Rate Analaysis Performed ?: Yes 0 0.00
18 Category : Vol - 2 -Chapter -18- Structural Glazing --- 2685 2819.25 38 107131.5 30.4 0.15
Item Code : 18.2 0 0.00
Item Description : Designing, fabricating, testing, protection, installing and fixing in position semi (grid) unitized system of structural glazing (with open joints) for linear as well as curvilinear portions of the building for all heights and all levels, including:(a) Structural analysis & design and preparation of shop drawings for the specified design loads conforming to IS 875 part III (the system must passed the proof test at 1.5 times design wind pressure without any failure), including functional design of the aluminum sections for fixing glazing panels of various thicknesses, aluminium cleats, sleeves and splice plates etc. gaskets, screws, toggles, nuts, bolts, clamps etc., structural and weather silicone sealants, flashings, fire stop (barrier)-cum- smoke seals, microwave cured EPDM gaskets for water tightness, pressure equalisation & drainage and protection against fire hazard including:(b) Fabricating and supplying serrated M.S. hot dip galvanised / Aluminium alloy of 6005 T5 brackets of required sizes, sections and profiles etc. to accommodate 3 Dimentional movement for achieving perfect verticality and fixing structural glazing system rigidly to the RCC/ masonry/ structural steel framework of building structure using stainless steel anchor fasteners/ bolts, nylon seperator to prevent bimetallic contacts with nuts and washers etc. of stainless steel grade 316, of the required capacity and in required numbers.(c)Providing and filling, two part pump filled, structural silicone sealant and one part weather silicone sealant compatible with the structural silicone sealant of required bite size in a clean and controlled factory / work shop environment, including double sided spacer tape, setting blocks and backer rod, all of approved grade, brand and manufacture, as per the approved sealant design, within and all around the perimeter for holding Glass.(d)Providing and fixing in position flashings of solid aluminium sheet 1 mm thick and of sizes, shapes and profiles, as required as per the site conditions, to seal the gap between the building structure and all its interfaces with curtain glazing to make it watertight.(e) Making provision for drainage of moisture/ water that enters the curtain glazing system to make it watertight, by incorporating principles of pressure equalization, providing suitable gutter profiles at bottom (if required), making necessary holes of required sizes and of required numbers etc. complete. This item includes cost of all inputs of designing, labour for fabricating and installation of aluminium grid, installation of glazed units, T&P, scaffolding and other incidental charges including wastages etc., enabling temporary structures and services, cranes or cradles etc. as described above and as specified. The item includes the cost of getting all the structural and functional design including shop drawings checked by a structural designer, dully approved by Engineer-in-charge. The item also includes the cost of all mock ups at site, cost of all samples of the individual components for testing in an approved laboratory, field tests on the assembled working structural glazing as specified, cleaning and protection till the handing over of the building for occupation. In the end, the Contractor shall provide a water tight structural glazing having all the performance characteristics etc. all complete as required, as per the Architectural drawings, as per item description, as specified, as per the approved shop drawings and as directed by the Engineer- in-Charge. 0 0.00
Unit : m² 0 0.00
Rate Analaysis Performed ?: Yes 0 0.00
19 Category : Vol - 2 -Chapter -10- Cladding Works 0 328 344.4 1428 491803.2 1142.4 0.69
Item Code : 10.2 0 0.00
Item Description : Providing edge moulding to 18mm thick Granite stone counters, vanities etc including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-charge. 0 0.00
Unit : m 0 0.00
Rate Analaysis Performed ?: Yes 0 0.00
20 Category : Vol - 3 -Chapter -6- CEMENT CONCRETE PAVEMENTS --- 1068 1121.4 2184.82 2450057.15 1747.856 3.44
Item Code : 6.8.1 0 0.00
Item Description : Precast Cement Concrete Interlocking Blocks - Providing and laying 60mm thick factory made precast M -30 grade Cement Concrete Paver Block as per IRC SP 63:2018 & IS 15658 for Cycle Tracks & Pedestrian Footpaths of approved shape and colour, laid in required pattern and including over 30mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of Engineer-in- charge. (WMM/WBM Base to be paid separately if necessary as per relevant technical specification). Ref to MoRT&H : IRC - IRC SP 63:2018 0 0.00
Unit : m² 0 0.00
Rate Analaysis Performed ?: Yes 0 0.00
21 Category : Vol - 3 -Chapter -14- RIVER TRAINING AND PROTECTION WORKS --- 1912 2007.6 21.79 43745.6 17.432 0.06
Item Code : 14.1.A 0 0.00
Item Description : Providing and laying boulders apron on river bed for protection against scour with stone boulders weighing not less than 40 kg each complete as per drawing and Technical specification. - Boulder Laid Dry Without Wire Crates. Ref to MoRT&H : IRC - 2503 0 0.00
Unit : m³ 0 0.00
Rate Analaysis Performed ?: Yes 0 0.00
22 Category : Vol - 2 -Chapter -12- Wood and PVC Works 0 643 675.15 58 39158.7 46.4 0.05
Item Code : 12.96 0 0.00
Item Description : Providing and fixing Fiber Glass Reinforced plastic (FRP) Door Frames of cross- section 90 mm x 45 mm having single rebate of 32 mm x 15 mm to receive shutter of 30 mm thickness. The laminate shall be moulded with fire resistant grade unsaturated polyester resin and chopped mat. Door frame laminate shall be 2mm thick and shall be filled with suitable wooden block in all the three legs. The frame shall be covered with fiber Glass from all sides. M.S. stay shall be provided at the bottom to steady the frame 0 0.00
Unit : m 0 0.00
Rate Analaysis Performed ?: Yes 0 0.00
23 Category : Vol - 2 -Chapter -12- Wood and PVC Works 0 3204 3364.2 156 524815.2 124.8 0.74
Item Code : 12.97.1 0 0.00
Item Description : Providing and fixing to existing door frames Glass Fibre Reinforced Plastic (FRP) panelled door shutter of required colour and approved brand and manufacture, made with fire - retardant grade unsaturated polyester resin, moulded to 3 mm thick FRP laminate for forming hollow rails and styles, with wooden frame and suitable blocks of seasoned wood inside at required places for fixing of fittings, cast monolithically with 5 mm thick FRP laminate for panels conforming to IS: 14856, including fixing to frames. - 30 mm thickness 0 0.00
Unit : m² 0 0.00
Rate Analaysis Performed ?: Yes 0 0.00
24 Category : Vol - 2 -Chapter -12- Wood and PVC Works 0 5719 6004.95 9.19 55185.49 7.352 0.08
Item Code : 12.85 0 0.00
Item Description : Providing & fixing of louvered ventilator made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead free with gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the ventilator frame. The frame having overall size of 39mm x 39mm with GI reinforcement of 1mm thickness. Louver clip in Aluminium (powder coated in white) will be used on the frame along with plastic parts for fixing the 4 mm pin head Glass. Wall thickness of frame shall be 2mm.Maximum possible size – 1000mm x 1000mm.(The cost is inclusive of all fixtures and separate charges for minor T&Ps shall not be made) 0 0.00
Unit : m² 0 0.00
Rate Analaysis Performed ?: Yes 0 0.00
25 Category : Vol - 2 -Chapter -11- Steel and Aluminium Work 0 2633 2764.65 51 140997.15 40.8 0.20
Item Code : 11.6.1 0 0.00
Item Description : supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete, including the cost of providing and fixing necessary 27.5 cm long wire springs manufactured from high tensile steel wire of adequate strength conforming to IS: 4454 - part 1 and M.S. top cover of required thickness for rolling shutters. 80x1.25 mm M.S. laths with 1.25 mm thick top cover including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. 0 0.00
Unit : m² 0 0.00
Rate Analaysis Performed ?: Yes 0 0.00
26 Category : Vol - 2 -Chapter -11- Steel and Aluminium Work 0 489 513.45 2256 1158343.2 1804.8 1.63
Item Description : Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in- charge. (Glazing, paneling and dash fasteners to be paid for separately) :For Fixed Portion: Powder coated aluminium (minimum thickness of powder coating 50 micron) including cost of materials, labour, usage charges of machinery complete as per specifications. 0 0.00
Unit : kg 0 0.00
Rate Analaysis Performed ?: Yes 0 0.00
27 Category : Vol - 2 -Chapter -8- Finishing 0 100 105 476 49980 380.8 0.07
Item Code : 8.51 0 0.00
Item Description : Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per specifications and as per directions of Engineer in charge. 0 0.00
Unit : m² 0 0.00
Rate Analaysis Performed ?: Yes 0 0.00
28 Category : Vol - 2 -Chapter -8- Finishing 0 178 186.9 626 116999.4 500.8 0.16
Item Code : 8.31 0 0.00
Item Description : Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives with pure Acrylic Resin, UV resistant, dirt & pick up resistant, Alkali & Water resistant of required shade: New work (Two coats applied @ 1.43 L/10 m² over and including priming coat of exterior primer applied @ 2.20 kg/10 m²) with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. 0 0.00
Unit : m² 0 0.00
Rate Analaysis Performed ?: Yes 0 0.00
29 Category : Vol - 2 -Chapter -8- Finishing 0 137 143.85 476 68472.6 380.8 0.10
Item Code : 8.25 0 0.00
Item Description : Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade :New work (two coats) over and in- cluding water thinnable priming coat with cement primer after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. 0 0.00
Unit : m² 0 0.00
Rate Analaysis Performed ?: Yes 0 0.00
30 Category : Vol - 2 -Chapter -8- Finishing 0 115 120.75 335.85 40553.89 268.68 0.06
Item Code : 8.40 0 0.00
Item Description : Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. 0 0.00
Unit : m² 0 0.00
Rate Analaysis Performed ?: Yes 0 0.00
31 Category : Vol - 2 -Chapter -4- Anti-Termite Treatment 0 118 123.9 672 83260.8 537.6 0.12
Item Code : 4.1 0 0.00
Item Description : Providing and injecting chemical emulsion for Pre-constructional Anti-Termite Treatment, creating continuous chemical barrier under and around the column pits, walls, trenches, basement excavation, top surface of the plinth filling, junction of wall and floor, along the external perimeter of building, expansion joints, over the top surface of consolidated earth on which apron is to be laid, surrounding of pipes and conduits with Chlorpyriphos 20% E.C. / Lindane 20% E.C. @ 3.19 l/m2 including cost of chemical, diluting in water to one percent concentration, labour, usage charges of machinery, complete as per specifications. 0 0.00
Unit : m² 0 0.00
Rate Analaysis Performed ?: Yes 0 0.00
32 Category : Vol - 2 -Chapter -8- Finishing 0 64 67.2 161 10819.2 128.8 0.02
Item Code : 8.12 0 0.00
Item Description : Extra for providing and mixing water proofing material in cement plaster work in proportion recommended by the manufacturers including cost of material etc as per specifications and as per directions of the Engineer- in-Charge. 0 0.00
Unit : kg 0 0.00
Rate Analaysis Performed ?: Yes 0 0.00
33 Category : Vol - 2 -Chapter -7- Roofing 0 568 596.4 506 301778.4 404.8 0.42
Item Code : 7.38 0 0.00
Item Description : Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 g/m2 as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 m or as desired by Engineer- in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. 0 0.00
Unit : m² 0 0.00
Rate Analaysis Performed ?: Yes 0 0.00
Item Code : 7.34 0 0.00
Item Description : Providing and fixing 6mm Clear/opal white/solar bronze/blue/green tinted Multi wall poly carbonate sheet for Tubular structure. The work including cost of all materials, labour charges and usage charges of machinery for cutting, welding, grinding and erection equipments, with all lead, transportation, loading and unloading and all other incidental charges etc. complete as per specification and directions of the Engineer in charge of the work. 0 0.00
Unit : m² 0 0.00
Rate Analaysis Performed ?: Yes 0 0.00
35 Category : Vol - 5 -Chapter -16- SANITARY WORKS --- 2773 2911.65 10 29116.5 8 0.04
Item Code : 16.12 0 0.00
Item Description : Constructing brick masonry chamber of internal dimension 300x230mm and depth of 600mm (inner dimensions) with modular bricks of CD 75 in cement mortar 1:6, bed concrete 150mm thick with 1:3:6, plastering 12 mm thick with cement mortar 1:4, CC 1:2:4 coping 75mm thk for fixing CI cover & frame etc. excluding the cost of CI frame and cover.. 0 0.00
Unit : each 0 0.00
Rate Analaysis Performed ?: Yes 0 0.00
36 Category : Vol - 5 -Chapter -16- SANITARY WORKS --- 5454 5726.7 24 137440.8 19.2 0.19
Item Code : 16.9 0 0.00
Item Description : Constructing brick masonry chamber of internal dimension 600x600mm and depth of 600mm (inner dimensions) with modular bricks of CD 75 in cement mortar 1:6, bed concrete 150mm thick with 1:3:6, plastering 12 mm thick with cement mortar 1:4, CC 1:2:4 coping 75mm thk for fixing CI cover & frame etc. excluding the cost of CI frame and cover.. 0 0.00
Unit : each 0 0.00
Rate Analaysis Performed ?: Yes 0 0.00
37 Category : Vol - 5 -Chapter -16- SANITARY WORKS --- 2564 2692.2 2 5384.4 1.6 0.01
Item Code : 16.23.2 0 0.00
Item Description : Providing and fixing SFRC frame and cover conforming to IS 12592 (part-I)-1988 and IS 12592 (part-II)- 1991 with latest amendment, including cutting slabs to the required size for the opening and fixing the cover in C.C. 1:2:4 and C.M. 1:3 plastering 20 mm thick to all exposed faces, curing for 10 days with all lead and lift with appurtenances. complete. Heavy Duty 0 0.00
Unit : Set 0 0.00
Rate Analaysis Performed ?: Yes 0 0.00
38 Category : Vol - 2 -Chapter -13- Water Supply & Plumbing Work 0 9 9.45 4000 37800 3200 0.05
Item Code : 13.34 0 0.00
Item Description : Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. 0 0.00
Unit : L 0 0.00
Rate Analaysis Performed ?: Yes 0 0.00
39 Category : Vol - 2 -Chapter -13- Water Supply & Plumbing Work 0 318 333.9 50 16695 40 0.02
Item Code : 13.31.3 0 0.00
Item Description : Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Internal work - Exposed on wall - 25 mm nominal dia Pipes 0 0.00
Unit : m 0 0.00
Rate Analaysis Performed ?: Yes 0 0.00
40 Category : Vol - 2 -Chapter -13- Water Supply & Plumbing Work 0 400 420 50 21000 40 0.03
Item Code : 13.31.4 0 0.00
Item Description : Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Internal work - Exposed on wall - 32 mm nominal dia Pipes 0 0.00
Unit : m 0 0.00
Rate Analaysis Performed ?: Yes 0 0.00
41 Category : Vol - 2 -Chapter -13- Water Supply & Plumbing Work 0 536 562.8 60 33768 48 0.05
Item Code : 13.31.5 0 0.00
Item Description : Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Internal work - Exposed on wall - 40 mm nominal dia Pipes 0 0.00
Unit : m 0 0.00
Rate Analaysis Performed ?: Yes 0 0.00
42 Category : Vol - 5 -Chapter -9- HDPE PIPE WORKS --- 286 300.3 24 7207.2 19.2 0.01
Item Code : 9.2.2 0 0.00
Item Description : Providing, laying and jointing HDPE pipes of specified grade and conforming to IS 4984-2016 with latest ammendments and conveying to work site including loading and unloading at both destinations and rolling and lowering into trenches, laying true to line and jointing of pipes and specials with electrofusion welding, giving hydraulic test as per relevant ISS with all lead and lifts including encasing the pipe alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excation, testing and commissioning. The rate is exclusive of required specials and fittings wherever necessary like saddle Tee, stub ends, flanged sets, bedns, reducers etc. complete (Contractor will make his own arrangements for procuring water for testing) etc. complete. NOTE: Upto 110mm dia Coil shall be used. For :HDPE PE 80 PN 8.0 - HDPE Grade PE80-PN8.0.75mm dia 0 0.00
Unit : m 0 0.00
Rate Analaysis Performed ?: Yes 0 0.00
43 Category : Vol - 2 -Chapter -14- Sanitary and Bath Fittings 0 2866 3009.3 16 48148.8 12.8 0.07
Item Code : 14.7.3 0 0.00
Item Description : Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: White Vitreous China Wash basin size 550x400 mm with a pair of 15 mm C.P. brass pillar taps 0 0.00
Unit : each 0 0.00
Rate Analaysis Performed ?: Yes 0 0.00
44 Category : Vol - 2 -Chapter -13- Water Supply & Plumbing Work 0 305 320.25 10 3202.5 8 0.00
Item Code : 13.2.2 0 0.00
Item Description : Providing and fixing brass bib cock of approved quality : 20 mm nominal bore 0 0.00
Unit : No. 0 0.00
Rate Analaysis Performed ?: Yes 0 0.00
45 Category : Vol - 2 -Chapter -13- Water Supply & Plumbing Work 0 128 134.4 14 1881.6 11.2 0.00
Item Code : 13.21.1 0 0.00
Item Description : Providing and fixing PTMT, push cock of approved quality and colour:15 mm nominal bore, 98 mm long, weighing not less than 75 g 0 0.00
Unit : No. 0 0.00
Rate Analaysis Performed ?: Yes 0 0.00
46 Category : Vol - 2 -Chapter -14- Sanitary and Bath Fittings 0 3082 3236.1 8 25888.8 6.4 0.04
Item Code : 14.7.1 0 0.00
Item Description : Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps 0 0.00
Unit : each 0 0.00
Rate Analaysis Performed ?: Yes 0 0.00
47 Category : Vol - 2 -Chapter -14- Sanitary and Bath Fittings 0 5977 6275.85 3 18827.55 2.4 0.03
Item Code : 14.3.1 0 0.00
Item Description : Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : W.C. pan with ISI marked white solid plastic seat and lid 0 0.00
Unit : each 0 0.00
Rate Analaysis Performed ?: Yes 0 0.00
48 Category : Vol - 2 -Chapter -14- Sanitary and Bath Fittings 0 4884 5128.2 14 71794.8 11.2 0.10
Item Code : 14.1.1 0 0.00
Item Description : Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests 0 0.00
Unit : each 0 0.00
Rate Analaysis Performed ?: Yes 0 0.00
49 Category : Vol - 2 -Chapter -14- Sanitary and Bath Fittings 0 18968 19916.4 9 179247.6 7.2 0.25
Item Code : 14.5.4 0 0.00
Item Description : Providing and fixing white vitreous china flat back half stall urinal of size 580x380x350 mm with white PVC automatic flushing cistern, with fittings, standard size C.P. brass flush pipe, spreaders with unions and clamps (all in C.P. brass) with waste fitting as per IS : 2556, C.I. trap with outlet grating and other couplings in C.P. brass, including painting of fittings and cutting and making good the walls and floors wherever required : Range of four half stall urinals with 10 litre P.V.C. automatic flushing cistern 0 0.00
Unit : each 0 0.00
Rate Analaysis Performed ?: Yes 0 0.00
50 Category : Vol - 2 -Chapter -14- Sanitary and Bath Fittings 0 2345 2462.25 10 24622.5 8 0.03
Item Code : 14.7.4 0 0.00
Item Description : Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: White Vitreous China Flat back wash basin size 550x 400 mm with single 15 mm C.P. brass pillar tap 0 0.00
Unit : each 0 0.00
Rate Analaysis Performed ?: Yes 0 0.00
51 Category : Vol - 2 -Chapter -14- Sanitary and Bath Fittings 0 496 520.8 4 2083.2 3.2 0.00
Item Code : 14.40.2 0 0.00
Item Description : Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour. 600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 g. 0 0.00
Unit : each 0 0.00
Rate Analaysis Performed ?: Yes 0 0.00
52 Category : Vol - 2 -Chapter -14- Sanitary and Bath Fittings 0 1066 1119.3 6 6715.8 4.8 0.01
Item Code : 14.32.3 0 0.00
Item Description : Providing and fixing mirror of superior Glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing : Oval shape 450x350 mm (outer dimensions) 0 0.00
Unit : each 0 0.00
Rate Analaysis Performed ?: Yes 0 0.00
53 Category : Vol - 5 -Chapter -16- SANITARY WORKS --- 1332 1398.6 20 27972 16 0.04
Item Code : 16.3.2 0 0.00
Item Description : Providing S&S RCC SPUN / VIBRATED CAST PIPES (REINFORCED) pipes NP-3 Class conforming to IS:458-1988 with latest amentments using ordinary portland cement, for sanitary works and conveying to work site, rolling and lowering into trenches, laying true to line and level including loading and unloading at both destinations and jointing of pipes and specials, perfect linking of joints with jack to correct position including cost of jointing materials, i.e, rubber rings conforming to IS: 5382 for S&S RCC pipes, with all leads and lifts as directed and giving necessary hydraulic test as per ISS to the required pressure and commissioning etc. complete. (Contractor will make his own arrangements for procuring water for testing). Before the execution of the work, the contractor shall carry out the survey. RCC NP3 Class pipe of 300 mm dia. 0 0.00
Unit : m 0 0.00
Rate Analaysis Performed ?: Yes 0 0.00
54 Category : Vol - 5 -Chapter -16- SANITARY WORKS --- 2353 2470.65 10 24706.5 8 0.03
Item Code : 16.3.5 0 0.00
Item Description : Providing S&S RCC SPUN / VIBRATED CAST PIPES (REINFORCED) pipes NP-3 Class conforming to IS:458-1988 with latest amentments using ordinary portland cement, for sanitary works and conveying to work site, rolling and lowering into trenches, laying true to line and level including loading and unloading at both destinations and jointing of pipes and specials, perfect linking of joints with jack to correct position including cost of jointing materials, i.e, rubber rings conforming to IS: 5382 for S&S RCC pipes, with all leads and lifts as directed and giving necessary hydraulic test as per ISS to the required pressure and commissioning etc. complete. (Contractor will make his own arrangements for procuring water for testing). Before the execution of the work, the contractor shall carry out the survey. RCC NP3 Class pipe of 450 mm dia. 0 0.00
Unit : m 0 0.00
Rate Analaysis Performed ?: Yes 0 0.00
55 Category : Vol - 5 -Chapter -16- SANITARY WORKS --- 3140 3297 10 32970 8 0.05
Item Code : 16.3.7 0 0.00
Item Description : Providing S&S RCC SPUN / VIBRATED CAST PIPES (REINFORCED) pipes NP-3 Class conforming to IS:458-1988 with latest amentments using ordinary portland cement, for sanitary works and conveying to work site, rolling and lowering into trenches, laying true to line and level including loading and unloading at both destinations and jointing of pipes and specials, perfect linking of joints with jack to correct position including cost of jointing materials, i.e, rubber rings conforming to IS: 5382 for S&S RCC pipes, with all leads and lifts as directed and giving necessary hydraulic test as per ISS to the required pressure and commissioning etc. complete. (Contractor will make his own arrangements for procuring water for testing). Before the execution of the work, the contractor shall carry out the survey. RCC NP3 Class pipe of 600 mm dia. 0 0.00
Unit : m 0 0.00
Rate Analaysis Performed ?: Yes 0 0.00
56 Category : Vol - 5 -Chapter -16- SANITARY WORKS --- 4854 5096.7 15 76450.5 12 0.11
Item Code : 16.3.10 0 0.00
Item Description : Providing S&S RCC SPUN / VIBRATED CAST PIPES (REINFORCED) pipes NP-3 Class conforming to IS:458-1988 with latest amentments using ordinary portland cement, for sanitary works and conveying to work site, rolling and lowering into trenches, laying true to line and level including loading and unloading at both destinations and jointing of pipes and specials, perfect linking of joints with jack to correct position including cost of jointing materials, i.e, rubber rings conforming to IS: 5382 for S&S RCC pipes, with all leads and lifts as directed and giving necessary hydraulic test as per ISS to the required pressure and commissioning etc. complete. (Contractor will make his own arrangements for procuring water for testing). Before the execution of the work, the contractor shall carry out the survey. RCC NP3 Class pipe of 900 mm dia. 0 0.00
Unit : m 0 0.00
Rate Analaysis Performed ?: Yes 0 0.00
57 Category : Vol - 5 -Chapter -16- SANITARY WORKS --- 9345 9812.25 30 294367.5 24 0.41
Item Code : 16.3.13 0 0.00
Item Description : Providing S&S RCC SPUN / VIBRATED CAST PIPES (REINFORCED) pipes NP-3 Class conforming to IS:458-1988 with latest amentments using ordinary portland cement, for sanitary works and conveying to work site, rolling and lowering into trenches, laying true to line and level including loading and unloading at both destinations and jointing of pipes and specials, perfect linking of joints with jack to correct position including cost of jointing materials, i.e, rubber rings conforming to IS: 5382 for S&S RCC pipes, with all leads and lifts as directed and giving necessary hydraulic test as per ISS to the required pressure and commissioning etc. complete. (Contractor will make his own arrangements for procuring water for testing). Before the execution of the work, the contractor shall carry out the survey. RCC NP3 Class pipe of 1200 mm dia. 0 0.00
Unit : m 0 0.00
Rate Analaysis Performed ?: Yes 0 0.00
58 Category : Vol - 3 -Chapter -17- ROAD & BRIDGE WORKS TESTING & MAINTENANCE --- 175 183.75 4320 793800 3456 1.11
Item Code : 17.B.3 0 0.00
Item Description : Bridge Maintenance & Testing - Dewatering on BHP basis by using water pump including diversion of stream, providing cofferdams, earthern bunds etc. as may be necessary for foundation and other parts of the the works and pumping out water during and after excavation as may be required by using 5.0 to 9.0 BHP pump etc. complete. (prior approval of Superintending Engineer will be necessary) 0 0.00
Unit : hr 0 0.00
Rate Analaysis Performed ?: Yes 0 0.00
59 Category : Vol - 3 -Chapter -15- REPAIR AND REHABILITATION --- 277 290.85 3204.6 932057.91 2563.68 1.31
Item Code : 15.5.A 0 0.00
Item Description : Sealing of cracks/porous concrete by injection process through nipples/Grouting complete as per Technical Specification. - Cement Grout. Ref to MoRT&H : IRC - 2806 0 0.00
Unit : kg 0 0.00
Rate Analaysis Performed ?: Yes 0 0.00
60 Category : Vol - 2 -Chapter -13- Water Supply & Plumbing Work 0 332 348.6 7 2440.2 5.6 0.00
Item Code : 13.5.3 0 0.00
Item Description : Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete : 25 mm nominal bore 0 0.00
Unit : No. 0 0.00
Rate Analaysis Performed ?: Yes 0 0.00
61 Category : Vol - 3 -Chapter -8- TRAFFIC CALMING MEASURES, ROAD SIGNAGES & MARKING (ROAD FURNITURE) --- 109 114.45 449 51388.05 359.2 0.07
Item Code : 8.10 0 0.00
Item Description : Painting Two Coats on New Concrete Surfaces - Painting two coats after filling the surface with synthetic enamel paint in all shades on new plastered concrete surfaces. Ref to MoRT&H : IRC - 803 0 0.00
Unit : m² 0 0.00
Rate Analaysis Performed ?: Yes 0 0.00
62 Category : Vol - 1 -Chapter -I- Earth Work --- 95 99.75 273.45 27276.64 218.76 0.04
Item Code : 1.12 0 0.00
Item Description : Mechanical Means - Earth work in surface excavation by mechanical means for lowering & leveling the ground for all works other than foundation in all kinds of soils & upto depth not exceeding 300mm as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, removal of stumps and other deleterious matter including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenances required to complete the work. In all kinds of soils upto 300 mm depth 0 0.00
Unit : m³ 0 0.00
Rate Analaysis Performed ?: Yes 0 0.00
63 Category : Vol - 1 -Chapter -I- Earth Work --- 242 254.1 252.93 64269.51 202.344 0.09
Item Code : 1.4.1 0 0.00
Item Description : Manual Means - Earth work excavation by manual means for drains, canals, waste weir, draft, approach channels, key trenches, foundation of Buildings & bridges and such simillar works in all kinds of soils, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, removal of stumps and other deleterious matter, excavated surface leveled and sides neatly dressed disposing off the excavated stuff or sorting & stacking the selected stuff for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools & other appurtenaces required to complete the work. In all kinds of soils Depth upto 1.5 m 0 0.00
Unit : m³ 0 0.00
Rate Analaysis Performed ?: Yes 0 0.00
64 Category : Vol - 2 -Chapter -11- Steel and Aluminium Work 0 93 97.65 38056.2 3716187.93 30444.96 5.22
Item Code : 11.1 0 0.00
Item Description : Providing and fixing Structural Steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. 0 0.00
Unit : kg 0 0.00
Rate Analaysis Performed ?: Yes 0 0.00
65 Category : Vol - 5 -Chapter -16- SANITARY WORKS --- 54704 57439.2 2 114878.4 1.6 0.16
Item Code : 16.8.3 0 0.00
Item Description : Construction of RCC Machinehole chambers of 1:1.5:3 proportion or approved type Cast-insitu / Pre-cast RCC Machinehole chambers, constructed using form vibrators of standard type, with barricading, danger lighting and using of sight rails and boning rods wherever necessary, shoring and strutting wherever required using Ordinary Port Land Cement, using 1:1.5:3 proportion RCC with 20 mm and down graded jelly, well graded sand and steel of approved quality, 200 mm thick top concrete slab, having wall thickness and raft thickness as in approved drawings and with an offset in raft alround the chamber as in approved drawing, benching concrete with 1:6 slope towards the central drain finished smooth, including fixing and grouting of pipes, including conveying to work spot supply and fixing SFRC Machinehole cover and frame (Heavy duty) conforming to IS:12592 with latest amendments, on a bed of CC 1:2:4 Providing and fixing of minimum 3 mm thick encapsulated plastic footsteps (as per IS 10910) on 12 mm dia. Grade Fe-500 steel bar (as per IS 1786) staggered at 300 mm apart as detailed in Technical specifications, including stone grit beding wherever required, watering, curing, engraving Machinehole number with flow direction on the inner cylindrical surface etc., complete including cost of reinforcement steel and fabrication charges and also cost and conveyance of all materials, labour with all lead and lifts. The Pre-cast RCC Machinehole are for various diamters and depths as stated below and as per detailed drawings, specifications and direction of the Engineer. For 1.2m dia Machinehole: Constructing Pre-cast RCC Machinehole 1.2 m internal dia. , 1.6 M depth & SFRC cover & frame 0 0.00
Unit : each 0 0.00
Rate Analaysis Performed ?: Yes 0 0.00
66 Category : Vol - 1 -Chapter -II- Concrete Works 0 6147 6454.35 98.15 633494.45 78.52 0.89
Item Code : 2.1.4 0 0.00
Item Description : Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing, and all the other appurtenances required to complete the work as per technical specifications. - Mix 1:3:6 Using 20 mm nominal size graded crushed coarse aggregates 0 0.00
Unit : m³ 0 0.00
Rate Analaysis Performed ?: Yes 0 0.00
67 Category : Vol - 2 -Chapter -5- Stone Masonry Works 0 5585 5864.25 898 5266096.5 718.4 7.40
Item Code : 5.1.1 0 0.00
Item Description : Providing Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) upto plinth level with : Cement mortar 1:6 (1 cement : 6 coarse sand) 0 0.00
Unit : m³ 0 0.00
Rate Analaysis Performed ?: Yes 0 0.00
68 Category : Vol - 2 -Chapter -5- Stone Masonry Works 0 6594 6923.7 43.776 303091.89 35.0208 0.43
Item Code : 5.2 0 0.00
Item Description : Providing Coursed rubble masonry (first sort) with hard stone in foundation and plinth with Cement mortar 1:6 (1 cement : 6 coarse sand) 0 0.00
Unit : m³ 0 0.00
Rate Analaysis Performed ?: Yes 0 0.00
69 Category : Vol - 2 -Chapter -6- Masonry Works 0 7957 8354.85 5.454 45567.35 4.3632 0.06
Item Code : 6.2 0 0.00
Item Description : Providing Brick work with common burnt clay Non Modular bricks of clasS designation 3.5 in foundation and plinth in Cement mortar 1:6 (1 cement : 6 coarse sand) including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work. 0 0.00
Unit : m³ 0 0.00
Rate Analaysis Performed ?: Yes 0 0.00
Item Code : 6.32 0 0.00
Item Description : Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2185 (Part - I) - 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications. 0 0.00
Unit : m² 0 0.00
Rate Analaysis Performed ?: Yes 0 0.00
71 Category : Vol - 2 -Chapter -6- Masonry Works 0 1229 1290.45 132.5 170984.62 26.5 21.2 0.24
Item Code : 6.33 0 0.00
Item Description : Providing and constructing load bearing wall with Solid Concrete blocks of size 400x150x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2185 (Part - I) - 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications. 0 0.00
Unit : m² 0 0.00
Rate Analaysis Performed ?: Yes 0 0.00
72 Category : Vol - 2 -Chapter -9- Flooring 0 1141 1198.05 161 192886.05 128.8 0.27
Item Code : 9.12.2 0 0.00
Item Description : Providing and laying vitrified floor tiles with thickness 9-10 mm in different sizes with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ m2 including grouting the joints with white cement and matching pigments etc., complete. Size of Tile 600x600 mm 0 0.00
Unit : m² 0 0.00
Rate Analaysis Performed ?: Yes 0 0.00
73 Category : Vol - 2 -Chapter -9- Flooring 0 1072 1125.6 89 100178.4 71.2 0.14
Item Code : 9.9 0 0.00
Item Description : Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/m2 including pointing the joints with white cement and matching pigment etc., complete. 0 0.00
Unit : m² 0 0.00
Rate Analaysis Performed ?: Yes 0 0.00
74 Category : Vol - 2 -Chapter -9- Flooring 0 1446 1518.3 253 384129.9 202.4 0.54
Item Code : 9.39 0 0.00
Item Description : Providing skirting, dadooing, rises of steps with colour glazed tiles 6mm thick on 10mm thick cement plaster 1:3 and jointed with white cement slurry over existing rough plaster surface using glazed tiles of approved make and size including cost of materials, labour, complete as per specifications. 0 0.00
Unit : m² 0 0.00
Rate Analaysis Performed ?: Yes 0 0.00
Item Code : 9.6.1 0 0.00
Item Description : Providing and laying Chequerred precast cement concrete tiles 22 mm thick in footpath & courtyard, jointed with neat cement slurry mixed with pigment to match the shade of tiles, including rubbing and cleaning etc. complete, on 20 mm thick bed of cement mortar 1:4 (1 cement: 4 coarse sand) Light shade pigment using white cement 0 0.00
Unit : m² 0 0.00
Rate Analaysis Performed ?: Yes 0 0.00
76 Category : Vol - 2 -Chapter -9- Flooring 0 2462 2585.1 211.4 546490.14 169.12 0.77
Item Code : 9.23 0 0.00
Item Description : Providing and laying flamed finish Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rub- bing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge : ** Flamed finish granite stone slab Black, Cat Eye, River Pink or equivalent. 0 0.00
Unit : m² 0 0.00
Rate Analaysis Performed ?: Yes 0 0.00
Item Code : 9.28 0 0.00
Item Description : Providing and laying flooring and steps machine cut granite slabs 40 mm thick on cement mortar bed 1:6, 25 mm thick, and pointed with cement mortar 1:3 over existing cement concrete bed , including cost of materials, mortar labour, curing complete as per specifications. 0 0.00
Unit : m² 0 0.00
Rate Analaysis Performed ?: Yes 0 0.00
78 Category : Vol - 3 -Chapter -8- TRAFFIC CALMING MEASURES, ROAD SIGNAGES & MARKING (ROAD FURNITURE) --- 236 247.8 997.78 247249.88 798.224 0.35
Item Code : 8.1.a 0 0.00
Item Description : Cast in Situ Cement Concrete M20 Kerb - Construction of cement concrete kerb with top and bottom width 115 and 165 mm respectively, 250 mm high in M 15 grade foundation 150 mm thick, foundation having 50 mm projection beyond kerb stone, kerb stone laid with kerb laying machine, foundation concrete laid manually, all complete as per clause 409 - PCC M15 grade for kerb base 0 0.00
Unit : m 0 0.00
Rate Analaysis Performed ?: Yes 0 0.00
79 Category : Vol - 2 -Chapter -8- Finishing 0 293 307.65 476 146441.4 380.8 0.21
Item Code : 8.2.1 0 0.00
Item Description : Providing 15 mm cement plaster on the rough side of single or half brick wall of mix 1:4 (1 cement: 4 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. 0 0.00
Unit : m² 0 0.00
Rate Analaysis Performed ?: Yes 0 0.00
80 Category : Vol - 2 -Chapter -8- Finishing 0 382 401.1 740.37 296962.41 592.296 0.42
Item Code : 8.9 0 0.00
Item Description : Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) and a top layer 6 mm thick cement plaster with cement mortar 1:3 (1 cement : 3 coarse sand) finished rough with sponge to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. 0 0.00
Unit : m² 0 0.00
Rate Analaysis Performed ?: Yes 0 0.00
81 Category : Vol - 2 -Chapter -8- Finishing 0 425 446.25 531 236958.75 424.8 0.33
Item Code : 8.6.2 0 0.00
Item Description : Providing 20 mm cement plaster with cement mortar 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement to brick/ stone masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. 0 0.00
Unit : m² 0 0.00
Rate Analaysis Performed ?: Yes 0 0.00
82 Category : Vol - 2 -Chapter -10- Cladding Works 0 1411 1481.55 13.5 20000.92 10.8 0.03
Item Code : 10.23 0 0.00
Item Description : Providing and fixing of premium quality Terracota clay tiles for cladding of size 12x4x2 inches with twin holes on 12mm thick cement mortar 1:3 & jointed with Adhesive/cement slurry over rough plaster surface excluding cost of rough plastered surface. The work includes cost of all materials, labour charges for all items of work, usage charges for equipment, etc., complete as per specification. 0 0.00
Unit : m² 0 0.00
Rate Analaysis Performed ?: Yes 0 0.00
83 Category : Vol - 1 -Chapter -II- Concrete Works 0 6227 6734.5 211.78 1426232.41 169.424 2.00
Item Code : 2.4.3 0 0.00
Item Description : Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necessary, including all lead & lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. - M 25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates 0 0.00
Unit : m³ 0 0.00
Rate Analaysis Performed ?: Yes 0 0.00
84 Category : Vol - 1 -Chapter -II- Concrete Works 0 6227 9807.53 40.44 396616.51 32.352 0.56
Item Code : 2.4.3 0 0.00
Item Description : Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necessary, including all lead & lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. - M 25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates 0 0.00
Unit : m³ 0 0.00
Rate Analaysis Performed ?: Yes 0 0.00
85 Category : Vol - 1 -Chapter -II- Concrete Works 0 6227 11115.2 12.44 138273.09 9.952 0.19
Item Code : 2.4.3 0 0.00
Item Description : Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necessary, including all lead & lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. - M 25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates 0 0.00
Unit : m³ 0 0.00
Rate Analaysis Performed ?: Yes 0 0.00
86 Category : Vol - 1 -Chapter -II- Concrete Works 0 6891 12300.44 22.99 282787.12 18.392 0.40
Item Code : 2.5.3 0 0.00
Item Description : Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. - M 30 Design Mix Using 20 mm nominal size graded crushed coarse aggregates 0 0.00
Unit : m³ 0 0.00
Rate Analaysis Performed ?: Yes 0 0.00
87 Category : Vol - 1 -Chapter -II- Concrete Works 0 6891 7959.11 56.01 445789.75 44.808 0.63
Item Code : 2.5.3 0 0.00
Item Description : Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. - M 30 Design Mix Using 20 mm nominal size graded crushed coarse aggregates 0 0.00
Unit : m³ 0 0.00
Rate Analaysis Performed ?: Yes 0 0.00
88 Category : Vol - 1 -Chapter -II- Concrete Works 0 6371 7358.51 128.5 945568.54 102.8 1.33
Item Code : 2.3.2 0 0.00
Item Description : Providing and laying in Cement Concrete for all Basement & surface level works, return walls, retaining walls, sunken floors etc. The granite/trap/ basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necessary, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. - M 25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates 0 0.00
Unit : m³ 0 0.00
Rate Analaysis Performed ?: Yes 0 0.00
89 Category : Vol - 1 -Chapter -II- Concrete Works 0 6891 11576.88 14.97 173305.89 11.976 0.24
Item Code : 2.5.3 0 0.00
Item Description : Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. - M 30 Design Mix Using 20 mm nominal size graded crushed coarse aggregates 0 0.00
Unit : m³ 0 0.00
Rate Analaysis Performed ?: Yes 0 0.00
90 Category : Vol - 1 -Chapter -II- Concrete Works 0 6891 10853.32 10.84 117649.99 8.672 0.17
Item Code : 2.5.3 0 0.00
Item Description : Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. - M 30 Design Mix Using 20 mm nominal size graded crushed coarse aggregates 0 0.00
Unit : m³ 0 0.00
Rate Analaysis Performed ?: Yes 0 0.00
91 Category : Vol - 1 -Chapter -II- Concrete Works 0 69749 73236.45 46.231 3385794.32 36.9848 4.75
Item Code : 2.11.h 0 0.00
Item Description : Steel Fabrication Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification. All other type of structures 0 0.00
Unit : t 0 0.00
Rate Analaysis Performed ?: Yes 0 0.00
92 Category : Vol - 1 -Chapter -II- Concrete Works 0 6227 7192.18 528.84 3803512.47 423.072 5.34
Item Code : 2.4.3 0 0.00
Item Description : Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necessary, including all lead & lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. - M 25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates 0 0.00
Unit : m³ 0 0.00
Rate Analaysis Performed ?: Yes 0 0.00
93 Category : Vol - 3 -Chapter -2- SITE CLEARANCE --- 1374 1442.7 30 43281 24 0.06
Item Code : 2.17.ix.C 0 0.00
Item Description : Removing all type of Hume Pipes and Stacking including Earthwork and Dismantling of Masonry Works. - Above 900 mm 0 0.00
Unit : m 0 0.00
Rate Analaysis Performed ?: Yes 0 0.00
94 Category : Vol - 1 -Chapter -I- Earth Work --- 2682 2816.1 11.74 33061.01 9.392 0.05
Item Code : 1.23 0 0.00
Item Description : Mechanical Means - Providing and Filling in foundation with granite / trap broken metal 100mm. and down size & with approved sand including hand packing, ramming, watering, including cost of all materials and labour with all lead and lift complete as per specifications. 0 0.00
Unit : m³ 0 0.00
Rate Analaysis Performed ?: Yes 0 0.00
95 Category : Vol - 1 -Chapter -II- Concrete Works 0 6166 10358.88 171.18 1773233.08 136.944 2.49
Item Code : 2.1.6 0 0.00
Item Description : Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing, and all the other appurtenances required to complete the work as per technical specifications. - Mix 1:2:4 Using 20 mm nominal size graded crushed coarse aggregates 0 0.00
Unit : m³ 0 0.00
Rate Analaysis Performed ?: Yes 0 0.00
96 Category : Vol - 3 -Chapter -6- CEMENT CONCRETE PAVEMENTS --- 1395 1464.75 212 310527 169.6 0.44
Item Code : 6.8.6 0 0.00
Item Description : Precast Cement Concrete Interlocking Blocks - Providing and laying in place 300mm x 300mm x 16mm cement tactile directional and warning tiles (for a person with visual impairment) of the approved brand and make and specified colour for outdoor floors such as footpath, courtyard, multimodals location etc. laid on 20mm thick base of cement mortar 1:4 (1 cement: 4 coarse sand) in all shapes and patterns including grouting the joints with white cement with matching pigments etc. complete as per as per standards. Ref to MoRT&H : IRC - IRC SP 117:2018 0 0.00
Unit : m² 0 0.00
Rate Analaysis Performed ?: Yes 0 0.00
97 Category : Vol - 2 -Chapter -8- Finishing 0 283 297.15 636 188987.4 508.8 0.27
Item Code : 8.29 0 0.00
Item Description : Finishing walls with textured exterior paint of required shade :New work (Two coats applied @ 3.28 L/10 m²) over and including priming coat of exterior primer applied @ 2.20kg/10 m² to give an even shade after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. 0 0.00
Unit : m² 0 0.00
Rate Analaysis Performed ?: Yes 0 0.00
98 Category : Vol - 1 -Chapter -II- Concrete Works 0 6184 7142.52 25.35 181062.88 20.28 0.25
Item Code : 2.2.1 0 0.00
Item Description : Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications. - M 20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates 0 0.00
Unit : m³ 0 0.00
Rate Analaysis Performed ?: Yes 0 0.00
99 Category : Vol - 2 -Chapter -17- Rain Water Harvesting 0 1170 1228.5 0.36 442.26 0.288 0.00
Item Code : 17.14 0 0.00
Item Description : Providing and laying 100mm thick pre-cast cover slabs over Road side drains / utility ducts / Rain water harvesting pit of width not exceeding 1000 mm using M20 concrete reinforced with TMT bars Fe 550 @ 6kg/ m2, slabs jointed in CM 1:3 proportion and nicely finished Including providing holes in the Cover slabs wherever necessary for easy drain- age of surface water including of labour, materials, scaffolding, usage of machinery, curing, lead and lift charges etc, Complete. 0 0.00
Unit : m² 0 0.00
Rate Analaysis Performed ?: Yes 0 0.00
100 Category : Vol - 3 -Chapter -14- RIVER TRAINING AND PROTECTION WORKS --- 1912 2007.6 404.67 812415.49 323.736 1.14
Item Code : 14.4.A 0 0.00
Item Description : Providing and laying Pitching on slopes laid over prepared filter media including boulder apron laid dry in front of toe of embankment complete as per drawing and Technical specifications - Stone/Boulder. Ref to MoRT&H : IRC - 2504 0 0.00
Unit : m³ 0 0.00
Rate Analaysis Performed ?: Yes 0 0.00
101 Category : Vol - 3 -Chapter -2- SITE CLEARANCE --- 563 591.15 149.25 88229.14 119.4 0.12
Item Code : 2.19 0 0.00
Item Description : Dismantling of Cement Concrete Pavement - Dismantling of cement concrete pavement by mechanical means using pneumatic tools, breaking to pieces not exceeding 0.02 m3 in volume and stock piling at designated locations and disposal of dismantled materials and stacking serviceable and unserviceable materials separately. Ref to MoRT&H : IRC - 202 0 0.00
Unit : m³ 0 0.00
Rate Analaysis Performed ?: Yes 0 0.00
102 Category : Vol - 3 -Chapter -3- EARTH WORK, EROSION CONTROL AND DRAINAGE --- 6 6.3 600 3780 480 0.01
Item Code : 3.5 0 0.00
Item Description : Scarifying the existing bituminous road surface to a depth of 50 mm and disposal of scarified material by Mechanical Means using Hydraulic excavator with in all lifts and lead. Ref to MoRT&H : IRC - 305.4.3 0 0.00
Unit : m² 0 0.00
Rate Analaysis Performed ?: Yes 0 0.00
103 Category : Vol - 2 -Chapter -19- Dismantling & Demolition 0 482 506.1 33.09 16746.85 26.472 0.02
Item Code : 19.7.1 0 0.00
Item Description : Demolishing brick work manually/ by mechanical means including stack- ing of serviceable material and disposal of unserviceable material to the appropriate disposal area as per direction of Engineer-in-charge. 0 0.00
Unit : m³ 0 0.00
Rate Analaysis Performed ?: Yes 0 0.00
104 Category : Vol - 3 -Chapter -3- EARTH WORK, EROSION CONTROL AND DRAINAGE --- 105 110.25 1263.47 139297.57 1010.776 0.20
Item Code : 3.7 0 0.00
Item Description : Compacting Original Ground - Compacting original ground supporting embankment - Loosening, leveling and Compacting original ground supporting embankment to facilitate placement of first layer of embankment, scarified to a depth of 150 mm, mixed with water at OMC and then compacted by rolling so as to achieve minimum dry density as given in Table 300-2 for embankment construction. Ref to MoRT&H : IRC - 305.3.4 0 0.00
Unit : m³ 0 0.00
Rate Analaysis Performed ?: Yes 0 0.00
105 Category : Vol - 1 -Chapter -II- Concrete Works 0 5918 6213.9 246.29 1530421.43 197.032 2.15
Item Code : 2.1.3 0 0.00
Item Description : Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing, and all the other appurtenances required to complete the work as per technical specifications. - Mix 1:3:6 Using 40 mm nominal size graded crushed coarse aggregates 0 0.00
Unit : m³ 0 0.00
Rate Analaysis Performed ?: Yes 0 0.00
106 Category : Vol - 1 -Chapter -II- Concrete Works 0 6227 8826.77 93.79 827862.76 75.032 1.16
Item Code : 2.4.3 0 0.00
Item Description : Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necessary, including all lead & lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. - M 25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates 0 0.00
Unit : m³ 0 0.00
Rate Analaysis Performed ?: Yes 0 0.00
107 Category : Vol - 1 -Chapter -II- Concrete Works 0 80195 84204.75 16.74 1409587.52 13.392 1.98
Item Code : 2.11.a 0 0.00
Item Description : Steel Fabrication Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification. Buildings 0 0.00
Unit : t 0 0.00
Rate Analaysis Performed ?: Yes 0 0.00
108 Category : Vol - 3 -Chapter -4- SUB-BASES, BASES (NON-BITUMINOUS), SHOULDERS AND STABILIZATION METHODS --- 2560 2688 710.18 1908963.84 568.144 2.68
Item Code : 4.1.A.ii 0 0.00
Item Description : Granular Sub-Base - Plant Mix Method - Construction of Granular Sub-Base of required grading as per design mixing in a mechanical mix plant at OMC, carriage of mixed Material to work site, spreading in uniform layers with motor grader on prepared surface and compacting with vibratory power roller to achieve the desired density, complete as per clause 401 - For Grading -II Material. Ref to MoRT&H : IRC - 401 0 0.00
Unit : m³ 0 0.00
Rate Analaysis Performed ?: Yes 0 0.00
109 Category : Vol - 3 -Chapter -6- CEMENT CONCRETE PAVEMENTS --- 1161 1219.05 2337.74 2849821.95 1870.192 4.00
Item Code : 6.8.2 0 0.00
Item Description : Precast Cement Concrete Interlocking Blocks - Providing and laying 80mm thick factory made precast M -30 grade Cement Concrete Paver Block as per IRC SP 63:2018 & IS 15658 for Commercial Traffic Axle load repetitions upto 10MSA & for Residential Streets of approved shape and colour, laid in required pattern and including over 40mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of Engineer-in-charge. (WMM/WBM Base to be paid separately as per relevant technical specification). Ref to MoRT&H : IRC - IRC SP 63:2018 0 0.00
Unit : m² 0 0.00
Rate Analaysis Performed ?: Yes 0 0.00
110 Category : Vol - 3 -Chapter -12- SUB-STRUCTURE OF BRIDGES --- 239 250.95 34.2 8582.49 27.36 0.01
Item Code : 12.2 0 0.00
Item Description : Providing weep holes in Brick masonry/Plain/ Reinforced concrete abutment, wing wall/ return wall with PVC Pipe 110mm outer dia at 2 kg per m2, extending through the full width of the structure with slope of 1V :20H towards drawing foce. Complete as per drawing and Technical Specifications. Ref to MoRT&H : IRC - 2706 & 2200 0 0.00
Unit : m 0 0.00
Rate Analaysis Performed ?: Yes 0 0.00
111 Category : Vol - 3 -Chapter -12- SUB-STRUCTURE OF BRIDGES --- 2677 2810.85 107.1 301042.04 85.68 0.42
Item Code : 12.4 0 0.00
Item Description : Providing and laying of Filter media with granular materials/ stone crushed aggregates satisfying the requirements laid down in clause 2504.2.2. of MoRTH specifications to a thickness of not less than 600 mm with smaller size towards the soil and bigger size towards the wall and provided over the entire surface behind abutment, wing wall and return wall to the full height compacted to a firm condition complete as per drawing and Technical Specification. Ref to MoRT&H : IRC - 710.1.4. of IRC :78 & 2200 0 0.00
Unit : m³ 0 0.00
Rate Analaysis Performed ?: Yes 0 0.00
112 Category : Vol - 1 -Chapter -II- Concrete Works 0 6227 7192.18 122.98 884494.3 98.384 1.24
Item Code : 2.2.3 0 0.00
Item Description : Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications. - M 25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates 0 0.00
Unit : m³ 0 0.00
Rate Analaysis Performed ?: Yes 0 0.00
113 Category : Vol - 3 -Chapter -14- RIVER TRAINING AND PROTECTION WORKS --- 3036 3187.8 162.58 518272.52 130.064 0.73
Item Code : 14.5 0 0.00
Item Description : Providing and laying Filter material underneath pitching in slopes complete as per drawing and Technical specification. Ref to MoRT&H : IRC - 2504 0 0.00
Unit : m³ 0 0.00
Rate Analaysis Performed ?: Yes 0 0.00
114 Category : Vol - 1 -Chapter -I- Earth Work --- 266 279.3 967.32 270172.48 773.856 0.38
Item Code : 1.9 0 0.00
Item Description : Manual Means - Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating Each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. 0 0.00
Unit : m³ 0 0.00
Rate Analaysis Performed ?: Yes 0 0.00
Item Name : Supplying PVC ringtite pipes conforming to IS 4985:2000 with latest amendments & conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joints, testing and commissioning, including loading unloading at both destinations and cuts of pipes wherever necessary including jointing of PVC pipes and specials (excluding cost of specials) with jointing of approved type, with all labour with all lead & lift including encasing the pipe alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excavation etc. complete giving necessary hydraulic test to the required pressure as per ISS (Contractor will make his own arrangements for procuring water for testing) etc. for:PVC pipes 160mm dia., 6 kg/sqcm & class 3Supplying PVC ringtite pipes conforming to IS 4985:2000 with latest amendments & conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joints, testing and commissioning, including loading unload ing at both destinations and cuts of pipes wherever necessary including jointing of PVC pipes and specials (excluding cost of specials) with jointing of approved type, with all labour with all lead & lift including encasing the pipe alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excavation etc. complete & giving necessary hydraulic test to the required pressure as per ISS (Contractor will make his own arrangements for procuring water for testing) etc. for:PVC pipes 160mmdia., 6 kg/sqcm & class 3 0 0.00
Unit : m 0 0.00
Item Name : Providing & fixing of black granite Deepasthambh Of size 1.20 m (Bottom Dia - 1.5 and Top Dia-0.9 m) x 4.0m ht. The Deepasthambh shall be fixed as per the drawing and at the place indicated by the Engineer in charge of the work. The cost includes transportation and fixing charges. 0 0.00
Unit : Each 0 0.00
Item Name : Providing, fixing and construction of white granite KIOSK (pergola) of column size 0.25 m x 0.25 m x 2.5 m - 4 Nos , Beam size 0.25 x 0.25 x 3.0 m -2 nos and Purlin size 0.15 m x 0.25 m x 3.0 m - 5 Nos . The cost includes transportation and fixing charges. The Kiosk shall be fixed as per drawing and at the place indicated by the Engineer in charge of the work. 0 0.00
Unit : Each 0 0.00
Item Name : Supply, linstallaion and commissloning and maintenance of Cascade Aeralion Systom 1.5 HP with IP 68 Protection grade. Aeratlon syslom wilth un geared high-speed motors with smali propollors shall be self-cleaning optimized for offectlve mixing aeration and vibration free running, water displacement capacity of minimum 100 Its/hr, dynamically balanced motor shaft and rotor, Including cost of all materials. 100 m cable, labour, HOM on machineries, loading, transportation all lead and lift etc, complete as per specifications and directions of Engineer - in charge of work. 0 0.00
S.No Item Details Rate INR (Excluding GST) Quantity Is BuyBack Minimum BuyBack Value
Item Name : Concealed Conduit System Supplying heavy gauge PVC conduit pipe .mm dia.mm thick confirming to IS 2509 with suitable size bends, metal/PVC junction boxes adhesive paste etc., and running before concreting the slab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction boxes and pipe ends should be covered using PVC end enclosures. run with 18SWG GI fish wire wherever necessary 19/20mm dia 2mm thick 0 0.00
Unit : m 0 0.00
Item Name : Concealed Conduit System Supplying heavy gauge PVC conduit pipe .mm dia.mm thick confirming to IS 2509 with suitable size bends, metal/PVC junction boxes adhesive paste etc., and running before concreting the slab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction boxes and pipe ends should be covered using PVC end enclosures. run with 18SWG GI fish wire wherever necessary 25 mm dia 2 mm thick 0 0.00
Unit : m 0 0.00
Item Name : Supplying heavy gauge PVC conduit pipe .mm dia.mm thick with suitable size bends, metal/PVC junction boxes adhesive paste etc.,by groove cutting in the wall and fixing by bracing U or J hooks and cement plastering up to the surface of the brick level and run with 18 SWG GI fish wire run through out the conduit wherever necessary. 19/20mm dia 2mm thick 0 0.00
Unit : m 0 0.00
Item Name : Supplying heavy gauge PVC conduit pipe .mm dia.mm thick with suitable size bends, metal/PVC junction boxes adhesive paste etc.,by groove cutting in the wall and fixing by bracing U or J hooks and cement plastering up to the surface of the brick level and run with 18 SWG GI fish wire run through out the conduit wherever necessary. 25mm dia 2mm thick 0 0.00
Unit : m 0 0.00
Item Name : Fabricating supplying & mounting MS box made out … SWG suitable for floor / wall mounting, fully weather proof with provision for better heat dissipation, provided with hinged front cover, equipped with tamper proof locking arrange ments, with suitable size clamps with necessary cable entry pipe with gland and box should be finished with 2 coats of red oxide primer paint and finally finished with approved colour enameled metal paint etc., complete. - 16SWG 0 0.00
Unit : Sqm 0 0.00
Item Name : Supplying and fixing angle iron frame work fabricated out of M.S. angle iron. and M.S. flat … with bolts, washers etc., and painted with 2 coats of red oxide and then two coats of approved paint. - 50x50x6mm 0 0.00
Unit : m 0 0.00
Item Name : Supplying . amps rated 3phase with neutral bus bar using required capacity electrolytic alluminium strips covered with heat shrinkable coloured PVC sleeve, mounted on phenolic/FRP/DMC insulator which are mounted on powder coated 40 x 6 mm M.S.flat frame work in existing panel board. The bus bar shall have suitable holes for termination of incoming & outgoing cables as per IS specification with necessary botls,nuts and washers etc., complete. -100Amps 4x30x6mm Aluminum Strips 0 0.00
Unit : m 0 0.00
Item Name : Supplying, fixing and wiring Earth Leakage Miniature Circuit Breaker [ELMCB] 240/450V up to 300mA sensitivity on existing wood/panel board. 32-40 Amps 4 pole 0 0.00
Unit : Each 0 0.00
Item Name : Fabricating supplying & mounting MS box made out … SWG suitable for floor / wall mounting, fully weather proof with provision for better heat dissipation, provided with hinged front cover, equipped with tamper proof locking arrange ments, with suitable size clamps with necessary cable entry pipe with gland & box should be finished with 2 coats of red oxide primer paint and finally finished with approved colour enameled metal paint etc., complete. 18 SWG 0 0.00
Unit : Sqmm 0 0.00
Item Name : Supplying 4mm thick plastic sheet with necessary nitches for fixing switches regulators etc., and fixing on existing wooden or metal box using N.F. screws. 0 0.00
Unit : Sqmm 0 0.00
Item Name : Supplying 6A flush/projected type socket and 6 amps flush/projected type SP switch either surface/flush mounting in a existing gang box or in a 4mm thick plastic sheet and fixing over a flush mounted wooden box and wiring using necessary capacity wires as required as per IS 1293 and IS 3654. 6Amps 3/5 Way 0 0.00
Unit : No 0 0.00
Item Name : Wiring for lighting/power circuit using one of FRLS PVC insulated 1100v grade, multistrand Copper conductor resistance single core wire in open or consealed system of wiring with specified IS- 694:1990 & confirming to GTP of Group - A.1.5 sqmm. 0 0.00
Unit : Per Mtr 0 0.00
Item Name : Wiring for lighting/power circuit using one of FRLS PVC insulated 1100v grade, multistrand Copper conductor resistance single core wire in open or consealed system of wiring with specified IS- 694:1990 & confirming to GTP of Group - A.2.5 sqmm. 0 0.00
Unit : Sqmm 0 0.00
Item Name : Wiring for lighting/power circuit using one of FRLS PVC insulated 1100v grade, multistrand Copper conductor resistance single core wire in open or consealed system of wiring with specified IS- 694:1990 & confirming to GTP of Group - A.4.0 sqmm. 0 0.00
Unit : Sqmm 0 0.00
Item Name : Point wiring using Copper wire with switch. Supplying and wiring adopting loop system in existing PVC Conduit /casing capping using 1100 V grade, COPPER conductor fleand FRLS PVC insulated, 2x1.5Sqmm cable confirming to GTP, with a 6Amps flush type SP control switch shall be fixed on the existing plastic sheet/ gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet. Group - A. Short point up to 3Mtr from tapping point to out let via switch 0 0.00
Unit : Point 0 0.00
Item Name : Point wiring using Copper wire with switch. Supplying and wiring adopting loop system in existing PVC Conduit /casing capping using 1100 V grade, COPPER conductor fleand FRLS PVC insulated, 2x1.5Sqmm cable confirming to GTP, with a 6Amps flush type SP control switch shall be fixed on the existing plastic sheet/ gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet. Group - A. Medium point a above 3 Mtr up to 6Mtr from tapping point to out let via switch 0 0.00
Unit : Point 0 0.00
Item Name : Point wiring using Copper wire with switch. Supplying and wiring adopting loop system in existing PVC Conduit /casing capping using 1100 V grade, COPPER conductor fleand FRLS PVC insulated, 2x1.5Sqmm cable confirming to GTP, with a 6Amps flush type SP control switch shall be fixed on the existing plastic sheet/ gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet. Group - A. Long point a above 6 Mtr up to 10Mtr from tapping point to out let via switch 0 0.00
Unit : Point 0 0.00
Item Name : Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve , indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898. 6-32Amps DP 0 0.00
Unit : Each 0 0.00
Item Name : Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve , indicator ON / OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898. 50-63 Amps DP 0 0.00
Unit : Each 0 0.00
Item Name : Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve , indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898. 6-32 Amps TPN 0 0.00
Unit : Each 0 0.00
Item Name : Supplying and fixing regular MCB distribution boards on wall /woodboard / flush mounting using required clamps, bolts, nuts etc., with provision for fixing suitable type capacity MCBs single phase / 3 phase / single door with powder coated painting. Made out of 14 SWG MS enclosure. I - Single Door. 12 Way SP & N 0 0.00
Unit : Each 0 0.00
Item Name : Supply and fixing of bakelite D.P/Socket/ switch with/without neon indicator over existing wood board or flush mounting in plastic plates/ nitches as per IS 1293 and IS 3854 Group - A.32A Bakelite DP 0 0.00
Unit : No 0 0.00
Item Name : Supply and fixing of bakelite D.P/Socket/ switch with/without neon indicator over existing wood board or flush mounting in plastic plates/nitches as per IS 1293 and IS 3854 Group - A.16A Three Way 5 Pin Socket 0 0.00
Unit : No 0 0.00
Item Name : Supplying and fixing of modular switch/ Socket/ stepped electronic fan regulator / dimmer/ telephone socket etc on existing modular switch plate as per IS 3854 and IS 1293 Group "A" TV/Telephone socket 0 0.00
Unit : Each 0 0.00
Item Name : Supplying of 1440rpm heavy duty exhaust fan with bracket blades suitable to operate on 230V 50Hz, AC Supply complete. 12" Sweep (300mm) 0 0.00
Unit : Each 0 0.00
Item Name : Fixing one exhaust fan after making a suitable nitch in the wall and finishing with cement mortar and colouring to match the existing wall or brackets with bolts and nuts and a 5 amps, ceiling rose with sufficient length of 23 / 0.0076 inch PVC insulated twin core wire of approved make with wire mesh and wooden frame. 0 0.00
Unit : Each 0 0.00
Item Name : Supplying & fixing of retrofit type - LED bulb . W with OPAL acrylic diffuser comprising of LED source with CCT 6500 degree K, CRI 70%. efficacy 80 lumen per W, life 25000 burning hours and Compliance to IS 10322/ IEC 60598, LM 79 & LM 80. The LED are driven by HF electronic driver integrated in the system, with PF 0.95, power loss should 5% of lamp Wage., short circuit & open circuit protection to be integrated in the circuit, The less than 20%, Life as per LM 79. The operating input voltage should be between 130 to 275 V. BIS Approved and Tested by NABL / CPRI accredited laboratory with 2 years Warranty against any manufacturing defect working under standard electrical condition 9W, 6500k 0 0.00
Unit : Each 0 0.00
Item Name : Supplying And fixing/replacing of 6/16/32A electrical accessories on existing switch board 6A Bakelite Ceiling Rose 0 0.00
Unit : No 0 0.00
Item Name : Supplying And fixing/replacing of 6/16/32A electrical accessories on existing switch board Pendant Holder 0 0.00
Unit : No 0 0.00
Item Name : Supplying of .feet -PVC Batten with integrated LED tube . W with high quality diffuser with Life of 25000 burning hours & 70% lumen maintenance with CRI80. Power Input:220-240V @ 50/60Hz & Power factor 0.9 along with CE approved. 2 years Warranty against any manufacturing defect working under standard electrical condition LED light fitting 1 x 4' - 20/22 W 0 0.00
Unit : Each 0 0.00
Item Name : Fixing all types and all capacities of fluorescent/false ceiling/spot light/CFL fittings indoor on the wall / ceiling/ rafters / girders using 23/0.0076” twin twisted PVC insulated wires, required Nos of round blocks and clamps. On wall/ceiling/Rafter/Girders 0 0.00
Unit : Each 0 0.00
Item Name : 1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part-1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3975 25 Sqmm, 3.5 Core, (12 GI Strips - 4 x 0.8 mm) 0 0.00
Unit : Km 0 0.00
Item Name : Laying of cable in Existing Trench/ GI pipe/ Stoneware/ RCC Hume pipe using wooden/ Aluminium Rollers as directed by department staff. 2.5 to 25 Sqmm. 0 0.00
Unit : Km 0 0.00
Item Name : Supplying & fixing of Porcelain fuse channel with cut out on existing wooden/panel using necessary nuts, bolts and washers. 63Amps 0 0.00
Unit : Each 0 0.00
Item Name : ClassA GI pipe Supply, Installation testing and commissioning of approved make heavy tubes (Class 'C') confirming to as per IS 1239 Part- I (25 mm Nominal bore 4.05 mm thick @ 2.97 Kg /m, 32 mm Nominal bore 4.05mm thick @ 3.84 Kg/m, 40 mm Nominal bore 4.05mm thick @ 4.43 Kg/m,50mm Nominal bore 4.47mm thick @ 6.17 Kg/m, 65mm Nominal bore 4.47 mm thick @ 7.90 Kg/m, 80mm Nominal bore 4.85 mm thick @ 10.10 Kg/m, 100mm Nominalbore 5.40 mm thick @ 14.40 Kg/m,150 mm Nominal bore, 5.40 mm thick @21.20 Kg/m, Such as Tees elbows check nuts unions, Flanger, Nipples etc. including cutting welding, Trending fixing on walls, ceiling (Using 41- Techpipe/ M.S.angle supports work includes two coats of metal primer and twocoats of Red enamel paint etc. including cost of materials, labour, usage charges of machinery complete as per specifications. Galvanized Iron Pipes 50 mm dia. 0 0.00
Unit : m 0 0.00
Item Name : GI Grounding pipe, B - Class, 42 mm dia, 2.5 Mtr long, 3.2 mm thick with bolt, nut, GI Strips and washer complete Minimum Weight of GI Pipe: 7.3 Kg 0 0.00
Unit : No 0 0.00
Item Name : Guy Wire & GI Wire as per IS-2141 8 SWG GI Wire(4.064 mm Dia), Std Wt: 131 Kg/KM 0 0.00
Unit : MT 0 0.00
Item Name : Aluminium End Terminal (Lug)10 Sqmm 0 0.00
Unit : No 0 0.00
Item Name : Heavy Duty Copper Terminal Long Barrel. 25 Sqmm Copper Terminal, Apprx Wt: 11 Gm 0 0.00
Unit : No 0 0.00
Item Name : Supplying and fixing ofCaution/Danger Board. 0 0.00
Unit : No 0 0.00
Item Name : Epoxy Terminating Kit (Pothead) suitable for 1.1 kV, LTUG Cable.Up to 4C x 50 Sqmm 0 0.00
Unit : Set 0 0.00
Item Name : Useofspecialhardwareforlongerlife,InsulationmaterialmeetsexactingIS8183specificationsforbettersoundattenuation,Flushstyling-noprojections,Fluiddrainsforlubeoilandfuel,Fuelfillingpointinsidetheenclosure.ThecompletesetshallhavesufficientsafetyandadheretoNEC,NBC2016,IEC,CPWDspecifications,PCB norms and KSGEI Acts and Rules.62.5KVA/50kw 0 0.00
Unit : Set 0 0.00
Item Name : Supply,Erection,testingandcommissioningofAMFpanelsuitablefor.kVADGset.Thepanelisofcubicaltypebase/floormountingcontrolpanelwithhingeddoors,undrilledbottomglandplate,aluminiumBusBarwiththeaccommodationfor.A4polecontactorforalternatorwiththermalO/Lrelay,.A4polecontactorformains,HRCfuseforshortcircuitprotection,MicroprocessorbasedAMFmodulewithsupplyfailuretimer,Restorationtimer,3impulseautomaticenginestart/stoplogic,Mains/generatorvoltage,.capacitybypassswitchandfrequencysensing,PCC1301controllerwithwatertemperature/Lubeoilpressure/enginespeed,Voltage/ampere/Frequency/kVA,Running-hourcount,Noofstarts,Faultindication,over/underspeed,Failstostart,Lowoilpleasure,Highenginetemperature,Under/overvoltage,overcurrent,Earthfaultrelay,withindicationsforMainson,LoadonMains,BatterychargeronPushbuttonsAMFmodulebypassMode,BatterychargerunitwithinbuiltAuto/ManualandFlat/Boostfacility.ThecompletesetshallhavesufficientsafetyandadheretoNEC,NBC2016,IEC,CPWDspecifications, PCB norms and KSGEI Acts and Rules. 62.5 KVA 0 0.00
Unit : Each 0 0.00
Item Name : Supplyingandfixingoneof230VDingdongbellandaflushtypebellpushwithgangboxfixedonnecessarywoodenorrawlplugsusingNFscrews with Remote. Ding Dong Bell 0 0.00
Unit : Point 0 0.00
Item Name : Point wiring using Copper wire without switch. Supplying and wiring adopting loop system in existing PVCConduit/ casing capping using 2x1.5Sqmm(Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLSmulti strand PVC insulated copper wire (confirming toIS-694: and latest amendments) without control switchshall be fixed on the existing plastic sheet/ gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet.2.2.2) Medium point above 3Mtr upto 6Mtr from tapping point to outlet via switch box 0 0.00
Unit : Point 0 0.00
Item Name : Point wiring using Copper wire without switch. Supplying and wiring adopting loop system in existing PVCConduit /casing capping using 2x1.5Sqmm(Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLSmulti strand PVC insulated copper wire (confirming toIS-694: and latest amendments) without control switchshall be fixed on the existing plastic sheet/ gang box, theother end of the wires shall be terminated with sufficientloose length in a wood/PVC round block. complete for eachoutlet. 2.2.3)Long point above 6Mtr upto 10Mtr from tapping point to out let via switch box 0 0.00
Unit : Point 0 0.00
Item Name : Supplying and flush mounting powder coated / galvanizedmetal box suitable for mounting modular switch plates. Thebox should be firmly flush mounted after due groovecutting in Brick/Stone/C.C wall 3Way 0 0.00
Unit : Each 0 0.00
Item Name : Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 4-5 Way 0 0.00
Unit : Each 0 0.00
Item Name : Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 6 Way 0 0.00
Unit : Each 0 0.00
Item Name : Supplying and flush mounting powder coated / galvanizedmetal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 8 Way 0 0.00
Unit : Each 0 0.00
Item Name : Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 10-12 Way 0 0.00
Unit : Each 0 0.00
Item Name : Wiring for lighting/power circuit using one of FRLS PVC insulated 1100 V grade, multi strand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694: confirming to latest amendments.6 sq mm 0 0.00
Unit : m 0 0.00
Item Name : Supplying and fixing superior quality modular switch mounting polycar bonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/ PVC box. 3 Module 0 0.00
Unit : Each 0 0.00
Item Name : Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box. 4 Module 0 0.00
Unit : Each 0 0.00
Item Name : Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box. 6 Module 0 0.00
Unit : Each 0 0.00
Item Name : Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box. 8 Module 0 0.00
Unit : Each 0 0.00
Item Name : Supplying and fixing superior quality modular switch mounting polycarbo nate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc. complete on the existing metal/PVC box. 10-12 Module 0 0.00
Unit : Each 0 0.00
Item Name : Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6Amps one way. 0 0.00
Unit : Each 0 0.00
Item Name : Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6 Amps 3 way socket 0 0.00
Unit : Each 0 0.00
Item Name : Supply of LED Streetlight luminaire with pressure die cast alumi nium housing body for optimal thermal dissipation. Lamp compart ment compri sing of antiglare clear diffuser with Injection moulded polycarbonate material, delivering superior light output. Rated life Burning Hrs 50000 hr @ Lumen Maintenance of 70%, maximum light intensity should be between 60 degrees to 70 degrees. CCT 5500K, IP 66 optical and electrical compartment & impact resistance of complete luminaire IK08. PowerFactor 0.9 with mains, Surge Protection- Min 5KV along with Over voltage/ Overload, short circuit/ miss-wiring protection. Compatible for pole mouting with outer dia of 40mm to 50mm. Universal Voltage driver to operate wide voltage range from 100V to 270V 50/60Hz application. Compliance to IS 10322/ IEC 60598, LM 79 & LM 80 Adherence with RoHS. UL approved MCPCB. Top access street light with single screw to ensure ease of maintenance at the sight site location with minimized minimal tools. LED Light fixture with .W System Power consumption. LED Efficiency 130 lm/ w, nominal CRI 75. Luminaire manufacturer should have in-house facility accredited by NABL/CPRI & any Government certified agency & Design & Development facility certified by ISO 9001:2008 . Housing with supplier word mark /name shall be Engraved / Embossing on the die cast housing/ Body part. Warranty of 2 Years 0 0.00
Unit : Each 0 0.00
Item Name : Supplying, fixing and wiring Residual current circuit breaker (RCCB) 240/450 V upto 300 mA sensitivity on existing wood/ panel board. 16-25 Amps 2 pole 0 0.00
Unit : Each 0 0.00
Item Name : Supplying and fixing regular MCB distribution boards on wall/wood board/ flush mounting using required clamps bolts,nuts etc., with provision for fixing suitable type capacity MCB's single phase / 3 phase / single door with powder coated painting. Made out of 14 SWG MS enclosure. II - Double Door 12 Way SP &N 0 0.00
Unit : Each 0 0.00
Item Name : Supplying and fixing regular MCB distribution boards on wall/ wood board/ flush mounting using required clamps bolts, nuts etc., with provision for fixing suitable type capacity MCB's single phase / 3 phase / single door with powder coated painting. Made out of 14 SWG MS enclosure. II - Double Door 8 Way SP &N 0 0.00
Unit : Each 0 0.00
Item Name : Good Quality well burnt charcoal for grounding purposes packed in non returnable gunny bag of 30 kg each 0 0.00
Unit : No 0 0.00
Item Name : Good Quality salt for grounding purposes packed in 50kg gunny bag 0 0.00
Unit : No 0 0.00
Item Name : Rod type of earthing using 40 mm Dia, 3 Mtr long MS rod as ground rod, in earth pit of 300 mm width and 3300 mm depth and using 50x6 mm flat welded to ground rod as terminal & connected to equipment ground terminal using PVC Al wire as specified 0 0.00
Unit : No 0 0.00
Item Name : Digging Digging of pit for providing GI Pipe type Earthing. 0 0.00
Unit : Per Pit 0 0.00
Item Name : Supplying and fixing of LED type panel board indicating lamp with required colour suitable for 230/440 VAC. 50 Hz 12/24 V D.C. 0 0.00
Unit : Each 0 0.00
Item Name : Supplying & fixing of Porcelain fuse channel with cut out on existing wooden/ panel using necessary nuts, bolts and washers. 32 Amps 0 0.00
Unit : Each 0 0.00
Item Name : Supplying and fixing hylum plastic sheet 3mm thick with necessary nitches for fixing switches, regulators etc., and fixing on existing wood or metal box using N. F. screws 0 0.00
Unit : Sqmm 0 0.00
Item Name : Change Over Switch Supplying of on load change over switches 4 poles, AC-23A Duty, 415V, 50 Hz, AC Supply. With all accessories. (SM Enclosure Sheet Metal Execution) 100 Amps 0 0.00
Unit : Each 0 0.00
Item Name : SupplyingandfixingMouldedCaseCircuitBreaker(MCCB)overtheexistingwood/panelboardusingnecessaryscrews,bolts,nuts,necessaryphaseseparators,handleandwiringcomplete.ProtectionofOverloadandShortcircuitwithadjustablethermalmagneticrelease,MicroprocessorreleaseshallhaveEarthFaultasperIS/IEC60947-2.(Icu=100%lcs).In4PMCCB,allPolesshouldhaveprotectionforShort-Cicrcuit/OverLoad.ForMicroprocessorMCCBSFacilityforsegregatingPriorityandNon-PriorityloadsmustbeavailableintheMCCB.MCCBshallbeprovidedwithdoubleinsulation(insulationbetweenfrontcoverandinternalpowercircuitstoavoidanyaccidentalcontactwithlivecurrentcarryingpathwiththefrontcoveropen).Multi-polebreakersshallbedesignedtobreakallthepolessimultaneously and they shall have a single mechanism. 125 A 25 kA 0 0.00
Unit : Each 0 0.00
Item Name : Ammeter /Voltmeter. Supplying, fixing and wiring 3 Phase Digital Ammeter / Voltmeter. 0 0.00
Unit : Each 0 0.00
Item Name : Electronic Trivector Meter Supplying and fixing Electronic Trivector Meter (ETV) suitable for operation LT operation and -CT operated meter in poly carbonate body in class 0.5 accuracy as per IS 14697 and completely wired. 0 0.00
Unit : Each 0 0.00
Item Name : C T Coils Supplying, fixing and wiring 50/5 to 400/5Amps 5VA burden Current Transformer. Class 0.5 accuracy with Tape Wound. 0 0.00
Unit : Each 0 0.00
Item Name : Supplying, fixing & wiring earth leakage relay with core balanced current transformer suitable for single phase 50 Hz AC with latest microcontroller based, digital readout of percentage leakage current, programmable delay/ auto/ manual reset facility suitable to mount on DIN rail/ flush mounting on panel board. 0 0.00
Unit : Each 0 0.00
Item Name : 1.1Kv XLPE or Heat resistant PVC insulated,PVC Extruded Inner sheath Armoured LT UG cable as per IS-1554(part-1 )or IS-7098 Part 1,Armouring strip thickness and resistivity as per IS-3975 10 sqmm 2 core(9 Gi strips-4 x 0.8 mm) 0 0.00
Unit : Km 0 0.00
Item Name : Class A GI pipe Supply, Installation testing and commissioning of approved make heavy tubes(Class 'C') confirming to as per IS1239 Part- I (25mm Nominal bore 4.05 mm thick@ 2.97 Kg/m, 32 mm Nominal bore 4.05 mm thick @ 3.84 Kg/m,40 mm Nominal bore 4.05 mm thick@ 4.43 Kg/m,50 mm Nominal bore4.47mm thick@ 6.17 Kg/m, 65mm Nominal bore 4.47 mm thick @ 7.90 Kg/m, 80 mm Nominal bore 4.85 mm thick @ 10.10 Kg/m, 100 mm Nominal bore 5.40 mm thick@ 14.40 Kg/m,150 mm Nominal bore, 5.40 mm thick @21.20 Kg/m, Such as Tees elbows check nuts unions, Flanger, Nipples etc.including cutting welding, Trending fixing on walls, ceiling (Using 41- Techpipe /M.S.angle supports work includes two coats of metal primer and two coats of Red enamel paint etc. including cost of materials, labour, usage charges of machinery complete as per specifications. Galvanised Iron Pipes 25 mm dia. 0 0.00
Unit : m 0 0.00
Item Name : Brass Cable Gland 25 mm 0 0.00
Unit : No 0 0.00
Item Name : Brass Cable Gland 32 mm 0 0.00
Unit : No 0 0.00
Item Name : LEDLamps Supplying & fixing retrofit type -PL- LED Lamp .WLED linear source with CCT 6500 degree K, CRI 70%.efficacy 80 lumen per watt, life 25000 burning hoursand Compliance to IS 10322/IEC 60598, LM 79 & LM80. The LED are driven by HF electronic driver integratedin the system, with PF 0.95, power loss should 5% oflamp wattage., short circuit & open circuit protection to beintegrated in the circuit, THD less than 20%, Life as per LM79. The operating input voltage should be between 130 to 275 volts. Tested by NABL/CPRI accredited laboratory with2 years Warranty against any manufacturing defect workingunder standard electrical condition. 8-9 Watts 0 0.00
Unit : Each 0 0.00
Item Name : Fixing Charges Supplying and Fixing of.mm dia class A GI pipe bracket up to 2 Mtrs long bent at suitable angle and fixing to this bracket 1x40/2x40 watts fluorescent tube street light fittingof all capacities to GI or CI or rail or RCC pole / wall using suitable clamps, bolts, and nuts and wiring using suitable capacity wires. Using 25 mm dia G.I.Pipe 0 0.00
Unit : Each 0 0.00
Item Name : Supplying, fixing and wiring Electronic Trivector Meter (ETV) 5 to 20 A single phase class-1 Accuracy 5.35 with Temper Proof Energy Meter 0 0.00
Unit : Each 0 0.00
Item Name : Supply and fixing polished wood board made of not less than 15mm thick plank on both sides of not more than 2 pieces and fixing the same to the wall using tapered inverted wooden plugs screws. 15" x 12" x 2" 0 0.00
Unit : Each 0 0.00
Item Name : Guy Wire & GI Wire as per IS-214110 SWG GI Wire(3.251 mm Dia), Std Wt: 82 Kg/KM 0 0.00
Unit : m 0 0.00
Item Name : Fabrication, Supplying, Erection, Testing and Commissioning of ……Mtrs long polygon high mast with Single / Multiple telescopic sections having, ( minimum overlap distance of 1.5 times of top section) thickness as per BSEN 10025 grade S 355 JO /ASTM A572-50 steel sheet plate for shaft suitable to withstand a wind velocity of 47 m/sec as per IS 875 part 3(as per GA Drawing).Base plate as per IS 2062/ASTM A572-50. The mast shall be Galvanized in single Hot-dip as per BSEN ISO 1461/ASTM A123 with an average 70 microns as per IS 2629, and welded as per BS 5135 Single L-Seam joint. The mast shall have 2way head frame with die cast LM-6 pulleys, stainless steel axle, Phosphorus Bronze bearing bush press-fitted with separate guides for 2 runs of 5mm dia, stainless steel wire rope of AISI 304grade 7/19-core, (Factor of Safety as per TR no-7). 2.5sqmm EPR insulated PCP sheathed trailing power cable housed inside the bottom shaft of mast with door having locking arrangement. The mast shall have power tool operating on 230/ 415V, 50Hz, 1/3 phases reversible geared motor. The mast shall have lantern of 2 segments, suitable dia with max load carrying capacity as per IS 1239. The mast shall be erected on existing RCC footing. The mast shall be supplied with 3mm thick template, lightning arrester of 1.2m length galvanized pipe with top arrow fitted on top of the head frame cover and GLS type aviation twin lamps fitting with wiring complete. ( excluding foundation) as per technical data. 0 0.00
Unit : Each 0 0.00
Item Name : Supply and fixing of 3 pole power contact or with NO /NC contacts on existing wood/ pane l board using necessary bolts,nuts,washer sand wiring etc., complete with AC-3 Rating and as per IS-13947 0 0.00
Unit : Each 0 0.00
Item Name : Supplying and fixing Microprocessor based Electronic timer (without contact or, Din Mounting using necessary bolts, nuts and washers etc., ) 3-120 sec setting 0 0.00
Unit : Each 0 0.00
Item Name : Class A GI pipe Supply, Installation testing and commissioning of approved make heavy tubes(Class 'C') confirming to as per IS 1239 Part- I (25 mm Nominal bore 4.05 mm thick@ 2.97 Kg/m, 32 mm Nominal bore 4.05 mm thick @ 3.84 Kg/m,40 mm Nominal bore 4.05 mm thick@ 4.43 Kg/m,50 mm Nominal bore 4.47 mm thick@ 6.17 Kg/m, 65 mm Nominal bore 4.47 mm thick @ 7.90 Kg/m, 80 mm Nominal bore 4.85 mm thick @ 10.10 Kg/m, 100 mm Nominal bore 5.40 mm thick@ 14.40 Kg/m,150 mm Nominal bore, 5.40 mm thick @21.20 Kg/m, Such as Tees elbows check nuts unions, Flanger, Nipples etc.including cutting welding, Trending fixing on walls, ceiling (Using 41- Tech pipe/M.S.angle supports work includes two coats of metal primer and two coats of Red enamel paint etc. including cost of materials, labour, usage charges of machinery complete as per specifications. Galvanized Iron Pipes 40 mm dia. 0 0.00
Unit : m 0 0.00
Item Name : LED Flood Light. Supplying of LED Floodlight with .W System Power consumption pressure die cast aluminum housing with powder coating with IP 65 protection.1,200- 275 V voltage with electronic Driver, PF 0.9, should meet ANSI 2G Vibration test, Compliance to UL/CE with Class I. System rating shall be 50K hrs. @ Lumen maintenance of 70%, system efficacy 80lm/w. Over load & Short circuit protection ensures reliable operation in spite of problem in output side. Compliance to IS 10322/IEC 60598, LM 79 & LM 80 Adherence with RoHS. UL approved MCPCB. Top access street light with single screw to ensure ease of maintenance at the sight site location with minimized minimal tools. LED Light fixture with .W System Power consumption. LED Efficiency 130 lm/w at 1 W & Fixture Efficiency 80 lm/w with nominal CRI 75. Luminaire manufacturer should have in-house facility accredited by NABL/ CPRI & any Government certified agency & Design & Development facility certified by ISO 9001:2008. Housing with supplier word mark /name shall be Engraved / Embossing on the die cast housing/ Body part. Warranty of 5 Years against any manufacturing defect working under standard electrical conditions as mentioned above should be given by LED manufacturer. LED Floodlight 100W 0 0.00
Unit : Each 0 0.00
Item Name : Concealed Conduit System Supplying heavy gauge PVC conduit pipe .mm dia. mm thick confirming to IS 2509 with suitable size bends, metal/PVC junction boxes adhesive paste etc., and running before concreting the slab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction boxes and pipe ends should be covered using PVC end enclosures. run with 18 SWG GI fish wire wherever necessary 40 mm dia 2 mm thick 0 0.00
Unit : m 0 0.00
Item Name : Fabricating, supplying and erection of …Mtrs long hot dip Galvanized Octagonal pole with BSEN 10025 grade S 355 JO steel plate for shaft, IS 2062 for base plate with door opening arrangements, including suitable boards, Bakelite sheet and MCBs as per IS specifications suitable to withstand the wind speed of 47 m/sec for …….Mtrs pole in single section and single joint welded as per IS 9595/IS 10178 AWS having dimensions bottom ….mm, top….mm with 3mm thick, suitable base plate and 4 Nos of long J bolts along with template and the pole shall be hot dip galvanized in single dipping with not less than 65 micron as per ASTM-A123 and 153 etc., (excluding foundation) as per drawing appended. 6 meters - Top 70 mm and bottom 130 mm dia 0 0.00
Unit : Each 0 0.00
Item Name : Supplying, and fixing of Hot dip Galvanized M.S.Bracket suitable for out door luminaries and mounted on Octagonal pole using necessary bolts, nuts etc., complete. Single Arm Bracket with 1000 mm Standard 40/50 MM dia 0 0.00
Unit : Each 0 0.00
Item Name : Supply of LED Streetlight luminaire with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of anti glare clear diffuser with Injection moulded polycarbonate material, delivering superior light output. Rated life Burning Hrs 50000 hr @ Lumen Maintenance of 70%, maximum light intensity should be between 60 degrees to 70 degrees. CCT 5500K, IP 66 optical and electrical compartment & impact resistance of complete luminaire IK08. Power Factor 0.9 with mains, Surge Protection- Min 5KV along with Over voltage/ Overload, short circuit/ miss-wiring protection. Compatible for pole mouting with outer dia of 40mm to 50mm. Universal Voltage driver to operate wide voltage range from 100V to 270V 50/60Hz application. Compliance to IS 10322/IEC 60598, LM 79 & LM 80 Adherence with RoHS. UL approved MCPCB. Top access street light with single screw to ensure ease of maintenance at the sight site location with minimized minimal tools. LED Light fixture with W System Power consumption. LED Efficiency 130 lm/w, nominal CRI 75. Luminaire manufacturer should have in-house facility accredited by NABL/CPRI & any Government certified agency & Design & Development facility certified by ISO 9001:2008 . Housing with supplier word mark /name shall be Engraved / Embossing on the die cast housing/ Body part. Warranty of 2 Years against any manufacturing defect working under standard electrical conditions as mentioned above should be given by LED manufacturer & Cree/Nichia/ Lumileds/ Osram make LED Source. LED Streetlight 70 watts 0 0.00
Unit : Each 0 0.00
Item Name : 1.1Kv XLPE or Heat resistant PVC insulated,PVC Extruded Inner sheath Armoured LT UG cable as per IS-1554 (part-1)or IS-7098 Part 1,Armouring strip thickness and resistivity as per IS-3975 10 Sq mm, 4 Core, (10 GI Strips - 4 x 0.8 mm) 4 Core 10 SQ MM 0 0.00
Unit : Km 0 0.00
Item Name : SupplyandInstallation/Fixing/ProvisionofPoleboxwithHRCFuse/MCBprovisionandsuitableconnector/terminalfor3Ph/1PhconnectionswithLoop-In&Loop-Outterminalsfor10mm2/25mm2 3.5 C AI/Ar/Cu/Ar Cable and branch out 2.5 mm2 2 core AI/Cu PVC Insulated cable,enclosed inaThermoplastic,Polystyreneenclosure, whichshouldbeshockproof,safe,IP65(WeatherProof),rustproof,dustproof,waterproofhavingInternallyEmbeddedGasketwithprovisionforcableentrythroughIP65Thermoplastic,polyamide glands and/or grommets. 260 mm x 210 mm x 116 mm 0 0.00
Unit : No 0 0.00
Item Name : Supplying and drawing Flexible Multicore Cable manufactured with electrolytic grade flexible copper with low conductor confirming to table 3 class 5 of IS:8130-1984 and (Virgin) PVC insulation and sheathed suitable for working voltage upto 1100Volts as per IS-694:1990. 3C X 1.5Sq.mm 0 0.00
Unit : m 0 0.00
Item Name : Fixing charges of post top/ Gate/ Garden fitting /LED on the existing CI / GI or any other pipe using required size of reducer, wiring using suitable wires.PWD Electrical SR 2022-23 [Pg.No:45, I.No: 13.6] 0 0.00
Unit : Each 0 0.00
Item Name : Supplying & fixing of Porcelain fuse channel with cut out on existing wooden/panel using necessary nuts, bolts and washers. 16Amps 0 0.00
Unit : Each 0 0.00
Item Name : Fabricating, supplying and erection of …Mtrs long hot dip Galvanized Octagonal pole with BSEN10025 grade S 355 JO steel plate for shaft, IS 2062 for base plate with door opening arrangements, including suitable boards, Bakelite sheet and MCBs as per IS specifications suitable to withstand the wind speed of 47 m/sec for …….Mtrs pole in single section and single joint welded as per IS 9595/IS 10178AWS having dimensions bottom ….mm, top….mm with 3mm thick, suitable base plate and 4Nos of long J bolts along with template and the pole shall be hot dip galvanized in single dipping with not less than 65 micron as per ASTM-A123 and 153 etc., (excluding foundation) as per drawing appended. 0 0.00
Unit : Each 0 0.00
Item Name : Supply of LED pole mounting type post top lantern with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of anti glare clear diffuser with Injection moulded polycarbonate/ clear glass material, delivering superior light output Rated life Burning Hrs 50000 hr@ Lumen Maintenance of 70%, CCT 5500K, IP 66 optical and electrical compartment & impact resistance of complete luminaire IK08. Power Factor 0.9 with mains, Surge Protection- Min 5KV along with Over voltage/Overload, short circuit/ miss-wiring protection. Compatible for pole mounting with outer dia of 40mm to 50mm. Universal Voltage driver to operate wide voltage range from 100V to 270V 50/60Hz application. Compliance to IS 10322/1 EC 60598, LM 79 & LM 80 Adherence with RoHS. UL approved MCPCB LED Efficiency 1301m/w, nominal CRI 75. Luminaire manufacturer should have in- house facility accredited by NABL/CPRI & any Government certified agency & Design & Development facility certified by ISO 9001:2008. Housing with supplier word mark /name shall be Engraved / Embossing on the die cast housing/ Body part Warranty of 2 Years against any manufacturing defect working under standard electrical conditions as mentioned above should be given by LED manufacturer & Cree/Nichia/ Lumileds/ Osram make LED Source.LED Post Top Lantern GARDEN 0 0.00
Unit : No 0 0.00
Item Name : SFU Supplying of Switch disconnector fuse unit (TPN) HRC type (but without HRC fuses). With AC-23 A duty and as per IS- 13947. 63 Amps 0 0.00
Unit : Each 0 0.00
Item Name : HRC Fuses Base Supplying and fixing HRC fuse units base on existing switch/ panel board 32 to 63 Amps 0 0.00
Unit : Each 0 0.00
Item Name : HRC Fuses Link Supplying and fixing HRC fuse link on existing switch fuse base with watt loss as per IS-13703. Up to 63Amps 0 0.00
Unit : Each 0 0.00
Item Name : ALUMIIUM BUS BAR Supplying . amps rated 3phase with neutral bus bar using required capacity electrolytic alluminium strips covered with heat shrinkable coloured PVC sleeve,mounted on phenolic/FRP/DMC insulator which are mounted on powder coated 40x6mm M.S.flat frame work in existing panel board. The bus bar shall have suitable holes for termination of incoming & outgoing cables as per IS specification with necessary botls,nuts and washers etc., complete. - 250Amps 4x30x10MM Aluminium strips 0 0.00
Unit : m 0 0.00
Item Name : U G Cable 1.1Kv XLPE or Heat resistant PVC insulated,PVC Extruded Inner sheath Armoured LT UG cable as per IS-1554 (part-1)or IS-7098 Part 1,Armouring strip thickness and resistivity as per IS-3975 95 sqmm 3.5 core (21 Gi strips-4x0.8mm) 0 0.00
Unit : Km 0 0.00
Item Name : U G Cable 1.1Kv XLPE or Heat resistant PVC insulated,PVC Extruded Inner sheath Armoured LT UG cable as per IS-1554(part-1 )or IS-7098 Part 1,Armouring strip thickness and resistivity as per IS-3975 16 Sq mm, 4 Core, (11 GI Strips - 4 x 0.8 mm) 0 0.00
Unit : Km 0 0.00
Item Name : Laying of cable in Existing Trench/ GI pipe/ Stone ware/ RCC Hume pipe using wooden/Aluminium Rollers as directed by department staff. 35 to 95Sqmm. 0 0.00
Unit : Km 0 0.00
Item Name : Providing PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joints, testing and commissioning, including loading unloading at both destinationsand cuts of pipes wherever necessary including jointing of PVC pipesand specials (excluding cost of specials) with jointing of approved type, with all labour with all lead & lift including encasing the pipealround to a depth of not less than 15 cms. with soft gravel or selectedearth available from the excavation etc. complete and giving necessary hydraulic test to the required pressure as per ISS (Contractor will makehis own arrange ments for procuring water for testing) etc. complete For:PVC pipes 63mm dia., 6 kg/sqcm & class 3 0 0.00
Unit : m 0 0.00
Item Name : Providing PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering in to trenches, laying true to line & level and perfect linking at joints, testing and commissioning, including loading unloading at both destinations and cuts of pipes wherever necessary including jointing of PVC pipes and specials (excluding cost of specials) with jointing of approved type, with all labour with all lead & lift including encasing the pipealround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excavation etc. complete and giving necessary hydraulic test to the required pressure as per ISS (Contractor will makehis own arrangements for procuring water for testing) etc. complete For: PVC pipes 160mm dia., 6 kg/ sqcm & class 3 0 0.00
Unit : m 0 0.00
Item Name : ClassA GI pipe Supply, Installation testing and commissioning of approved make heavy tubes (Class 'C') confirming to as per IS1239 Part- I (25mm Nominal bore 4.05 mm thick @ 2.97 Kg/m, 32mm Nominal bore 4.05mm thick @ 3.84 Kg/m,40mm Nominal bore 4.05mm thick@ 4.43 Kg/m, 50mm Nominal bore 4.47 mm thick @ 6.17 Kg/m, 65 mm Nominal bore 4.47 mm thick @ 7.90Kg/m, 80mm Nominal bore 4.85 mm thick @ 10.10 Kg/m, 100 mm Nominalbore 5.40 mm thick @ 14.40 Kg/m,150 mm Nominal bore, 5.40 mm thick @ 21.20 Kg/m, Such as Tees elbows check nuts unions, Flanger, Nipples etc.including cutting welding, Trending fixing on walls, ceiling (Using 41- Techpipe/ M.S.angle supports work includes two coats of metal primer and twocoats of Red enamel paint etc. including cost of materials, labour, usage charges of machinery complete as per specifications. Galvanized Iron Pipes 65 mm dia. 0 0.00
Unit : m 0 0.00
Item Name : ClassA GI pipe Supply, Installation testing and commissioning of approved make heavy tubes (Class 'C') confirming to as per IS1239 Part- I (25mm Nominal bore 4.05 mm thick @ 2.97 Kg/m, 32mm Nominal bore 4.05 mm thick @ 3.84 Kg/m,40mm Nominal bore 4.05mm thick @ 4.43 Kg/m,50mm Nominal bore4.47mm thick @ 6.17 Kg/m, 65 mm Nominal bore 4.47mm thick @ 7.90Kg/m, 80mm Nominal bore 4.85 mm thick @ 10.10 Kg/m, 100mm Nominalbore 5.40 mm thick @ 14.40 Kg/m,150mm Nominal bore, 5.40 mm thick @21.20 Kg/m, Such as Tees elbows check nuts unions, Flanger, Nipples etc.including cutting welding, Trending fixing on walls, ceiling (Using 41- Techpipe/M.S.angle supports work includes two coats of metal primer and twocoats of Red enamel paint etc. including cost of materials, labour, usage charges of machinery complete as per specifications. Galvanized Iron Pipes150 mm dia. 0 0.00
Unit : m 0 0.00
Item Name : Heavy Duty Copper Terminal Long Barrel.95 Sqmm Copper Terminal, Apprx Wt: 58 Gm 0 0.00
Unit : No 0 0.00
Item Name : Aluminium End Terminal (Lug)16 Sq mm 0 0.00
Unit : Each 0 0.00
Item Name : Brass Cable Gland 40 mm dia 0 0.00
Unit : No 0 0.00
Item Name : Brass Cable Gland 45 mm dia 0 0.00
Unit : No 0 0.00
Item Name : U G Cable 1.1Kv XLPE or Heat resistant PVC insulated,PVC Extruded Inner sheath Armoured LT UG cable as per IS-1554 (part-1 ) or IS-7098 Part 1, Armouring strip thickness and resistivity as per IS-3975 35 Sqmm, 4 Core, (15 GI Strips - 4 x 0.8 mm) . ESCOMS SR-2023-24 Page No.13 Item code 32.10 0 0.00
Unit : Km 0 0.00
Item Name : Heavy Duty Copper Terminal Long Barrel , 35 Sqmm Copper Terminal, Apprx Wt: 17 Gm ESCOMS SR-2023-24 Page No.26 Item code 59.02 0 0.00
Unit : No 0 0.00
Item Name : Double Pole TC Set for erection of Transformer on RCC/ PSCC 9 Mtr LongPoles as per IS-1977 For 25/63 100 kVA 4/5 Star Rated Transformer on RCC Pole - 9 Mtr Long, 145 Kg WL - MS ESCOMS SR2023-24 Page No.9 Item code 21.03 0 0.00
Unit : Set 0 0.00
Item Name : H - Frame Set for fixing 11 kV, 200 Amps Single Break GOS - (For DP structure for providing New GOS for sectionalisation) - MS ESCOMSSR 2023-24 Page No.11 Item code 24.06 0 0.00
Unit : Set 0 0.00
Item Name : Insulator as per IS-1445 for Ceremic, IS7935 for GI Pin, IEC-61109 for Polymeric DISC Insulator 45 kN Porcelain ESCOMSSR 2023-24 Page No. 5 Item code 6.09 0 0.00
Unit : No 0 0.00
Item Name : Insulator as per IS-1445 for Ceremic, IS 7935 for GI Pin, IEC-61109 for Polymeric , for GI Pin 11 kV, 45 kN Polymeric Insulator ESCOMSSR 2023-24 Page No. 5 Item code 6.10 0 0.00
Unit : No 0 0.00
Item Name : Insulator as per IS-1445 for Ceremic, IS 7935 for GI Pin, IEC-61109 for Polymeric ,11 kV, 70 kN Composite/ Polymeric Insulator ESCOMSSR 2023-24 Page No. 5 Item code 6.11 0 0.00
Unit : No 0 0.00
Item Name : Guy Clamp - GI ESCOMSSR 2023-24 Page No. 5 Item code 5.10 0 0.00
Unit : No 0 0.00
Item Name : Turn Buckle (GI) (Dwg No. BESCOM/GM/QS&S/07 Dtd 24.11.2018) ESCOMSSR 2023-24 Page No. 5 Item code 5.11 0 0.00
Unit : No 0 0.00
Item Name : Anchor Rod using 12 mm rounds/Guy Rod - GI ESCOMSSR 2023-24 Page No.5 Item code 5.13 0 0.00
Unit : No 0 0.00
Item Name : Guy Wire & GI Wire as per IS-2141 7/10 SWG GuyWire (7/3.251 mm Dia), Std Wt: 680 Kg/KM ESCOMSSR 2023-24 Page No.5 Item code 8.01 0 0.00
Unit : MT 0 0.00
Item Name : 11 kV, 200 Amps Single Break GOS (Dwg No. BESCOM/GM/ QS&S/23 Dtd 4.11.2018) ESCOMSSR 2023-24 Page No. 11 Item code 24.01 0 0.00
Unit : Set 0 0.00
Item Name : 11 kV, HG Fuse Unit with Solid Core Insulator(Dwg No. BESCOM/GM/QS&S/21Dtd4.11.2018) ESCOMSSR 2023-24 Page No. 9 Item code 20.01 0 0.00
Unit : Set of 3 Nos 0 0.00
Item Name : Distribution Transformer - 3 Phase,11kV/ 433V - Stacked CRGO Core with Oil as per IS-1180 (Part-1): 2014 B. CABLE ENTRY TYPE 12.14) 63 kVA, Aluminium Wdg, Star 2 (5 Star) ESCOM SSR 2023-24 Page No.7 Item code 12.14 0 0.00
Unit : No 0 0.00
Item Name : LT Distribution Box for Transformer a) LT Distribution Box for 100 kVA DTC with MCCB's (Sheet Metal) ESCOMSSR 2023-24 Page No.9 Item code 18.01 0 0.00
Unit : No 0 0.00
Item Name : LT Protection LT Protection Kit for 63 kVA ESCOMSSR2023-24 0 0.00
Unit : No 0 0.00
Item Name : 1.1 KV Class HR (Heat Resistant) PVC Insulated & Un Sheathed Aluminium Wires Multistrand Single Core Lead wires as per IS 694: 20101.1 KV Class HR (Heat Resistant) PVC Insulated & UnSheathed Aluminium Wires Multistrand Single Core Lead wires as per IS-694: 2010 PVC Wire - 95 Sqmm Al Wt:25 Kg,Total Wt: 36Kg/ 100Mtr Coil ESCOMS SR 2023-24 0 0.00
Unit : Coil 0 0.00
Item Name : PG Clamps - Rabbit to Rabbit ESCOM SSR 2023-24 Page No.6 Item code 9.02 0 0.00
Unit : No 0 0.00
Item Name : LT Line Spacer For TC Wiring (Dwg No. BESCOM / GM/ QS & S/38 Dtd 24.11.2018) ESCOMS SR 2023-24 0 0.00
Unit : No 0 0.00
Item Name : GI Fish Plate ESCOMS SR 2023-24 Page No.5 Item code 5.15 0 0.00
Unit : No 0 0.00
Item Name : LT 3 Phase 4 Wire 5-30 Amps Thread Through Type composite Meter Housing Box consisting of ETV Meter with AMR comply and LTCT with built in GSM/ GPRS Modem (as per technical specification) upto 100 kVA Distribution Transformer. ESCOMS SR 2023-24 0 0.00
Unit : No 0 0.00
Item Name : Anti Climbing Device GI Barbed wire (12 Mtr/ Kg) ESCOMS SR 2023-24 0 0.00
Unit : Each 0 0.00
Item Name : Lightning Arrester as per IEC-60099-4, 9 kV, 5 kA Lightning Arrester Metal Oxide Ceramic type with GROUND DIS CONNECTOR (Dwg No. BESCOM/ GM/ QS&S/ 26 Dtd 24.10.2007) ESCOMSSR 2023-24 0 0.00
Unit : No 0 0.00
Item Name : Caution/ Danger Board. ESCOMS SR 2023-24 0 0.00
Unit : No 0 0.00
Item Name : Cross Arms (MS & GI) as per IS-1977 ,11 kV, Special 3 Pin Cross Arm - GI ESCOMS SR 2023-24 0 0.00
Unit : No 0 0.00
Item Name : Clamps A Type (MS & GI) as per IS-1977, RCC Pole Clamp - MS (Dwg No. BESCOM/ GM/ QS&S /30 Dtd 24.11.2018) ESCOMS SR 2023-24 0 0.00
Unit : Each 0 0.00
Item Name : DP Set (2 Pole Structure Kit) as per IS-1977, For RCC Pole - 9 Mtr Long, 145 KG WL/ PSCC Pole - 9 Mtr Long, 300 Kg WL - GI ESCOMS SR 2023-24 0 0.00
Unit : Set 0 0.00
Item Name : Spiral Earth Electrodes .ESCOMS SR 2023-24 0 0.00
Unit : No 0 0.00
Item Name : ACSR Conductor as per IS-398 (Part - 2/1996), Rabbit ACSR (6/3.35 mm Al + 1/3.35 mm St), Std Wt: 214 Kg/KM. ESCOMS SR 2023-24 0 0.00
Unit : Km 0 0.00
Item Name : Digging of Pit Digging of Pit 1.8 Mtr depth for errection of 9 to 10 Mtr Long Steel/ RCC/ PSCC supports as per approved Drawing, Ordinary Soil ESCOMS SR 2023-24 0 0.00
Unit : Per Pit 0 0.00
Item Name : Erection of Poles Erection of RCC/PSCC Pole of 9 to 10 Mtr long in a pit of 1.8 Mtr depth Erection of Poles ESCOMS SR 2023-24 0 0.00
Unit : No 0 0.00
Item Name : Digging of Pit for GUY SET ,Ordinary Soil ESCOMS SR 2023-24 0 0.00
Unit : Per Pit 0 0.00
Item Name : Fixing of GUY Set with break insulator making use of 7/3.15 mm (7/10 SWG) galvanised steel wire with turn buckle and anchoring arrangement as per approved drawing. (Excluding excavation of PIT) but using 2 nos of No. 15 Strain Insulator ESCOMS SR 2023-24 0 0.00
Unit : Per Set 0 0.00
Item Name : Digging Digging of Pit for providing GI Pipe type Earthing Ordinary Soil ESCOMS SR 2023-24 0 0.00
Unit : Per Pit 0 0.00
Item Name : Erection of Double Pole Transformer Structure using 9 Mtr Long RCC (145 Kg WL)/ PSCC (300 Kg WL) Pole including fixing of Structure Materials, Erection of Poles etc., complete for mounting of Transformer as per approved drawing For 25/ 63/ 100 kVA ESCOMS SR 2023-24 0 0.00
Unit : Per Structure 0 0.00
Item Name : Erection of Poles Erection of H-Frame. ESCOMS SR 2023-24 0 0.00
Unit : No 0 0.00
Item Name : Fixing of DOLO, GOS, LA, Fuse Board, Service Mains, Spacer, Insulator Etc., Fixing DOLO Cutout/ Horn Gap Fuse including fixing of cross armand wiring ESCOMSSR 2023-24 0 0.00
Unit : Each 0 0.00
Item Name : Erection of Transformer & Structures Erection of 25 to 63 kVA Transformer on Transformer Structure ESCOMS SR 2023-24 0 0.00
Unit : Each 0 0.00
Item Name : Distribution Box for DTC Fixing LT Distribution box for 100/ 250/500 kVA DTC (Excluding wiring) ESCOMS SR 2023-24 Page No. 47 Item code 9.07 0 0.00
Unit : Per Box 0 0.00
Item Name : Street Light and Other Works Fixing of LT Protection Kit ESCOMS SR 2023-24 0 0.00
Unit : Per Kit 0 0.00
Item Name : Fixing Metering Box for housing the ETV Meter 3 Phase 4 Wire along with CT's, Meter & wiring for DTC 25/63 kVA TC ESCOMS SR 2023-24 Page No. 47 Item code 11.01 0 0.00
Unit : Per Set 0 0.00
Item Name : Fixing of Cross Arm, Single Top Support, EG Stirrup, Anti climbing Device, Guy Set, Guarding etc., Fixing of GI Barbed Wire (12 Mtr) ESCOMS SR 2023-24 Page No. 47 Item code 5.09 0 0.00
Unit : No 0 0.00
Item Name : Fixing of DOLO, GOS, LA, Fuse Board, Service Mains, Spacer, Insulator Etc.,Fixing of 3 Nos Lightning Arrestor including wiring ESCOMS SR 2023-24 Page No. 48 Item code 13.06 0 0.00
Unit : Set of 3 Nos 0 0.00
Item Name : Fixing of Cross Arm, Single Top Support, EG Stirrup, Anticlimbing Device, Guy Set, Guarding etc. Fixing Danger Board ESCOMS SR 2023-24 Page No. 45 Item code 5.15 0 0.00
Unit : Unit 0 0.00
Item Name : Erection of Poles Erection of 2 Pole Structure using RCC/ PSCC Pole 9 to 10 Mtr long ESCOMS SR 2023-24 Page No. 44 Item code 2.06 0 0.00
Unit : Per Structure 0 0.00
Item Name : Erection of Poles Providing Spiral Earth Electrode type earthing (without charcoal, salt etc.,) ESCOMS SR 2023-24 Page No. 44 Item code 2.08 0 0.00
Unit : No 0 0.00
Item Name : Stringing of conductor Rabbit binding of conductor on each insulator and dead ending on strain or disc/ strain insulator by means of clamps.Rabbit ACSR ESCOMS SR 2023-24 Page No. 46 Item code 6.02 0 0.00
Unit : Per Km 0 0.00
Item Name : Providing and fixing G.I. chain link fabric fencing of required width in mesh size 50 x 50 mm including strengthening with 2 mm dia wire or nuts, bolts and washers as required complete as per the direction of Engineer in- charge. (Made of G.I. wire of dia 4 mm) PWD SR 2023-24 Vol. 02 Item Code 11.58 Page No 95 Measurement = (10+8+10+8=36 x 2.60 =93.6 sqmtr). 0 0.00
Unit : Sqm 0 0.00
Item Name : 11 kV, 3 Core, XPLE HTUG Cable with pressure extruded inner sheeth, ROUND WIRE ARMOURED as per IS-7098 (Part-2) Armouring wires dia and Resistivity as per IS-397511 kV, 95 Sqmm, (54 GI Wires - 2.5 mm Dia) ESCOMS SR 2023-24 Page No. 15 Item code 36.01 0 0.00
Unit : Km 0 0.00
Item Name : 11 kV, Jointing & Cable Termination Kit as per IS-13573 Heat Shrinkable Outdoor Type Cable Termination Kit for XLPE Cable 3 x 95 Sqmm ESCOMS SR 2023-24 Page No.20 Item code 45.07 0 0.00
Unit : Set 0 0.00
Item Name : 11 kV, Jointing & Cable Termination Kit as per IS-13573 Heat Shrinkable Indoor Type Cable Termination Kit for XLPE Cable 3 x 95 Sqmm ESCOMS SR 2023-24 Page No.20 Item code 45.04 0 0.00
Unit : Set 0 0.00
Item Name : Miscellaneous Materials Cable covering tiles 250 x 125 x 40 mm ESCOMS SR 2023-24 Page No.32 Item code 68.06 0 0.00
Unit : Per 100 0 0.00
Item Name : Providing M-Sand : Supplying & filling in plinth, foundations / UG cable work with approved M-sand including watering, ramming, consolidating & dressing. The rate includes the cost of material, labour charges, required tools and plants etc., complete. Work shall be carried out as per the instructions of Engineer- in-charge of works as per the standard procedure. KPTCL SCHEDULE OF RATES 2023-24 Page No 158 Item code 3 Rates for Organization Specific Civil Works For Station and UG Cable work (Exclusive of GST) 0 0.00
Unit : Cum 0 0.00
Item Name : Miscellaneous Materials RCC Hume Pipe, 2000 mm Long, 150 mm Dia ESCOMS SR 2023-24 Page No. 32 Item code 68.01 0 0.00
Unit : No 0 0.00
Item Name : Miscellaneous Materials Collars for RCC Hume Pipe 150 mm Dia ESCOMS SR 2023-24 Page No. 32 Item code 68.03 0 0.00
Unit : No 0 0.00
Item Name : GI Pipe Supply, Installation testing &commissioning of approved make heavy tubes (Class 'C') confirming to as per IS 1239 Part- I (25 mm Nominal bore 4.05 mm thick@ 2.97 Kg/m, 32 mm Nominal bore 4.05 mm thick @ 3.84 Kg/m, 40 mm Nominal bore 4.05mm thick@ 4.43 Kg/m,50 mm Nominal bore 4.47 mm thick@ 6.17 Kg/m, 65 mm Nominal bore 4.47 mm thick @ 7.90 Kg/m, 80 mm Nominal bore 4.85 mm thick @ 10.10 Kg/m, 100mm Nominal bore 5.40mm thick @ 14.40 Kg/m, 150 mm Nominal bore, 5.40 mm thick @ 21.20 Kg/m, Such as Tees elbows check nuts unions, Flanger, Nipples etc. including cutting welding, Trending fixing on walls, ceiling (Using 41- Tech pipe/ M.S. angle supports work includes two coats of metal primer and two coats of Red enamel paint etc. including cost of materials, labour, usage charges of machinery complete as per specifications. 15.118.8) Galvanized Iron Pipes 100 mm dia PWD, Elct, SR-2023-24 Page No.93 Item code 15.118.4 0 0.00
Unit : m 0 0.00
Item Name : Miscellaneous Materials Route & Joint indicating slab with MS Anchor rod 0 0.00
Unit : No 0 0.00
Item Name : Laying of cable in Existing Trench/ GI pipe/ Stone Ware/ RCC Hume pipe using Wooden/Aluminium Rollers as directed by the departmental staff HT Cable Laying of cable in trench 3 x 95 to 150 Sqmm ESCOMS SR 2023-24 Page No. 52 Item code 21.01 0 0.00
Unit : Km 0 0.00
Item Name : 11 kV AB Cable Termination installation for 3 Core ESCOMS SR 2023-24 Page No. 55 Item code 24.33 0 0.00
Unit : No 0 0.00
Item Name : Laying and Jointing: Joining with mud mortar complete Covering the cable with tile ESCOMS SR 2023-24 Page No. 56 Item code 27.01 0 0.00
Unit : Km 0 0.00
Item Name : Spreading Sand and forming with Sand round the cable ESCOMSSR 2023-24 Page No. 56 Item code 28.09 0 0.00
Unit : Km 0 0.00
Item Name : Laying and Jointing the pipes (100-150 mm Dia) including lowering in Position: Fixing Collars etc., Joining with mud mortor complete RCC Pipe 0 0.00
Unit : m 0 0.00
Item Name : Laying the GI Pipe 80 mm to 150 mm dia at Drainage Water Supply Crossing including fixing collars elbows, bends, Tees and other fitting with Cuts and Threads wherever necessary complete. 0 0.00
Unit : Mtr 0 0.00
Item Name : Laying and Jointing: Joining with mud mortor complete Fixing of Route Joint Indicating Slab 0 0.00
Unit : No 0 0.00
Item Name : RCC Pole - 9 Mtrs Long, 145 kg WL (Material Charges) 0 0.00
Unit : No 0 0.00
Item Name : PSCC Pole - 9 Mtr Long, 200 Kg WL (Material Charges) 0 0.00
Unit : No 0 0.00
Item Name : 11 kv Horizontal cross arms with clamps, HTST supports, bolts, nuts and washers for RCC poles MS (Material Charges) 0 0.00
Unit : No 0 0.00
Item Name : HT ST Support 50x8 mm Flat - MS 0 0.00
Unit : No 0 0.00
Item Name : Clamps A Type (MS & GI) as per IS-1977 - RCC Pole Clamp - GI 0 0.00
Unit : No 0 0.00
Item Name : 11 kV, 5 kN Composite/Polymeric Pin Insulator (24 mm dia FRP Rod) 0 0.00
Unit : No 0 0.00
Item Name : No. 15 Strain Insulator (Material Charges) 0 0.00
Unit : No 0 0.00
Item Name : Digging of Pit 2.0 Mtr depth for erection of 9.5 Mtr Long RCC supports (350 Kg Working load for 33KV) as per approved Drawing.Hard Soil 0 0.00
Unit : Per Pit 0 0.00
Item Name : RCC Pole - 8 Mtr Long, 115 Kg WL (Dwg No. BESCOM/ GM/ QS & S/ 05 Dtd 24.11.2018) as per IS-785 Material Charges 0 0.00
Unit : No 0 0.00
Item Name : PSCC Pole - 8 Mtr Long, 200 Kg WL Material Charges 0 0.00
Unit : No 0 0.00
Item Name : LT 4 Pin Cross Arm - GI Material Charges 0 0.00
Unit : No 0 0.00
Item Name : LT 2 Pin Cross Arms - GI Material Charges 0 0.00
Unit : No 0 0.00
Item Name : 1.1 kV Polymeric Pin Insulator 0 0.00
Unit : No 0 0.00
Item Name : No. 8 Strain Insulator 0 0.00
Unit : No 0 0.00
Item Name : Open conduit system supplying heavy gauge PVC conduit pipe . .dia confirming to IS 2509 with suitable size bends, junction boxes, adhesive paste etc, and fixing using inverted wood plugs in case of RCC ceiling and RCC wall / stone structure or rawl plugs in case of bricks walls and cement plastering the damaged portion using heavy gauge saddles at an interval of 700 mm using NF screws. 25 mm dia 2 mm thick. 0 0.00
Unit : Mtr 0 0.00
Item Name : Wiring for lighting/ power circuit using one of FRLS PVC insulated 1100 V grade,multistrand copper wire with low conductorresistancesinglecoreinopenorconcealedsystemofwiringwithspecifiedIS-694:2010 1 mm2 0 0.00
Unit : m 0 0.00
Item Name : Fixing halogen/metal halide /SVL/ IL/LED floodlight fitting over existing pole/wall ceiling including clamps, bolts, nuts and wiring using suitable capacity wires. 0 0.00
Unit : Each 0 0.00
Item Name : Erection of RCC/PSCC Pole of 7.5 to 8 Mtr long in a pit of 1.5 Mtr depth 0 0.00
Unit : Each 0 0.00
Item Name : Digging of Pit 1.6 Mtr depth for erection of 7.5/8 Mtr Long Steel/ RCC/ PSCC supports as per approved Drawing. Hard Soil 0 0.00
Unit : Per Pit 0 0.00
Item Name : Digging of Pit for GUY SET Hard Soil 0 0.00
Unit : Per Pit 0 0.00
Item Name : Fixing of Cross Arm, Single Top Support, EG Stirrup, Anti climbing Device, Guy Set, Guarding etc., Fixing of 4 Pin cross arm with Insulator and Braces fixing Item no 5.02 Page No 45 Labour Cost 0 0.00
Unit : Each 0 0.00
Item Name : Fixing of Cross Arm, Single Top Support, EG Stirrup, Anti climbing Device, Guy Set, Guarding etc., Fixing of 2 Pin cross arm with Insulator and Braces fixing Item no 5.01 Page No 45 Labour Cost 0 0.00
Unit : Each 0 0.00
Item Name : Fixing of HT/LT Single Top Support Item no 5.06 Page No 45 Labour Cost 0 0.00
Unit : Each 0 0.00
Item Name : Fixing guarding including fixing of necessary cross arms for existing HT and LT line at Road Crossing, Telephone Line Crossings upto span of 60 Mtr Item no 5.12 Page No 45 Labour Cost 0 0.00
Unit : Per Set 0 0.00
Item Name : Releasing of Conductor Rabbit Item no 7.04 Page No 46 Labour Cost 0 0.00
Unit : Per Km 0 0.00
Item Name : Fixing of GUY Set with break insulator making use of 7/3.15 mm (7/10 SWG) galvanised steel wire with turn buckle and anchoring arrangement as per approved drawing. (Excluding excavation of PIT) 5.10 Pno 45 Labour Cost 0 0.00
Unit : Per Set 0 0.00
Item Name : SupplyofLEDBollardlightfittingof.Wwithpressurediecastaluminiumhousingbodyforoptimalthermaldissipation.LampcompartmentcomprisingofantiglarecleardiffuserwithInjectionmouldedpolycarbonate/clearglassmaterial,deliveringsuperiorlightoutputRatedlifeBurningHrs50000hr@LumenMaintenanceof70%,CCT 5500K,IP66opticalandelectricalcompartment&impactresistanceofcompleteluminaire IK08. Power Factor 0.9 withmains, Surge Protection- Min 5 KV along with Over voltage/ Overload, short circuit/ miss-wiring protection. Universal Voltage drivert ooperatewide voltage range from 100Vto270V50/60 Hzapplication. Complianceto IS 10322/ IEC 60598, LM79& LM80 Adherence with Ro HS.U Lapproved MCPCB, with 2 years Warrant yagainst any manufacturing defect working understandard electrical condition.11.12.2) 8W 1 m Height 0 0.00
Unit : Each 0 0.00
208 Item Code : NON SR ITEM 87.98 6 No --- 527.88 4.8 0.00
Item Name : Releasing of GI Barbed Wire (12 Mtr) Labour Cost 44.10*1.90=83.79 0 0.00
Unit : No 0 0.00
209 Item Code : NON SR ITEM 684.98 6 No --- 4109.88 4.8 0.01
Item Name : Releasing of GUY SET Labour Cost 343.35*1.90=652.36 0 0.00
Unit : Per Pit 0 0.00
210 Item Code : NON SR ITEM 429.42 60 No --- 25765.2 48 0.04
Item Name : Releasing of Insulator Polymeric11 kV, 5 kN Composite/ Polymeric Pin Insulator (24 mm dia FRP Rod) Labour Cost 215.25*1.90 = 408.97 0 0.00
Unit : No 0 0.00
Item Name : Releasing of Guy Wire & GI Wire 7/10 SWG Guy Wire (7/3.251 mm Dia), Std Wt: 680 Kg/KM Labour Cost 81087.30 *1.90 = 1,54,065.87 0 0.00
Unit : MT 0 0.00
212 Item Code : NON SR ITEM 123.59 20 No --- 2471.8 16 0.00
Item Name : Releasing of No. 15 Strain Insulator Labour Cost 61.95*1.90 = 117.70 0 0.00
Unit : No 0 0.00
Item Name : Labour charges for erection of outdoor type panel board and meter board units with all necessary materials and labour, tools and equipments including providing cement concrete foundation bed etc., complete as per specification, with testing of as per instructions of engineer incharge of work. 0 0.00
Unit : Job 0 0.00
Item Name : Earthing: Providing and fixing and wiring earth electrode for grounding circuits IC cutouts and other equipments on the meter board in the pit. The pits should be filled up with equal proportion of salt and charcoal 150mm around the pipe to complete depth. The connection from the pipe to the conduits etc. is to established through GI wire of sizes as per clause 7.3.3 of IS 732 using 12mm bolts, nuts, washers and check nuts, the pipe shall have 16 through holes of 12mm dia. 0 0.00
Unit : Job 0 0.00
Item Name : Supply and delivery of Centrifugal pumpset at site brand new best make and with discharge duty confirming to ISI standards and its latest amendments. 5 HP, size 50x40 Head 46M,Discharge 174LPM 0 0.00
Unit : Each 0 0.00
Item Name : Supply and delivery at site brand new best make starter/ control panel suitable for following HP centrifugal pump confirming with ISI mark and its latest amendments. Upto 7.5 HP centrifugal pump 0 0.00
Unit : Each 0 0.00
Item Name : Supplying of 1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3975 - 3.5core 25sqmm 0 0.00
Unit : Mtr 0 0.00
Item Name : Labour charges for laying of 1.1 KV class UG cable in existing trench GI pipe / Stoneware pipe / on wall / on pole as required - In existing trench/duct. 2.5 sq mm to 25 Sq mm 0 0.00
Unit : Mtr 0 0.00
Item Name : Earth work excavation for pipelines/cables by Manual means upto 600 mm trench width, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, removal of stumps and other deleterious matter, including dressing of excavated surfaces, disposing off or leveling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m. Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering and lift upto 1.5 m including cost of labour, tools, usage& other appurtenances required to complete the work. In all kinds of soils. Depth upto 1.50m 0 0.00
Unit : Cum 0 0.00
Item Name : Providing, Laying and Fixing of GI pipes conforming to IS 1239:1990 with latest amendments complete with GI fittings (excluding the cost of fittings) with cuts and threads wherever necessary, including testing for water tightness, with all lead and commissioning. (contractor will make his own arrangements for procuring water for testing) For:Heavy Duty GI Pipe etc. complete. Medium Duty GI pipe of 50mm dia 0 0.00
Unit : Mtr 0 0.00
Item Name : Earth work excavation for pipelines/cables by Manual means upto 600 mm trench width, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, removal of stumps and other deleterious matter, including dressing of excavated surfaces, disposing off or leveling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m. Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering and lift upto 1.5 m including cost of labour, tools, usage& other appurtenances required o complete the work. In all kinds of soils. Depth upto 1.50m 0 0.00
Unit : Cum 0 0.00
Item Name : Releasing of RCC pole- 9mtr long 145kgwl labour cost item no. 0 0.00
Unit : Each 0 0.00
Item Name : Releasing of 2-pin cross arms Labour cost 168 X 1.90=319.20 0 0.00
Unit : Each 0 0.00
Item Name : Releasing of 4-pin cross arms Labour cost 168 X 1.90=319.20 0 0.00
Unit : Each 0 0.00
Item Name : Releasing of HT/LT Single Top Support Labour cost 117.60 X 1.90=223.44 0 0.00
Unit : Each 0 0.00
Item Name : Alkathine tube Transparent Alkathine tube 19mm dia, 2mm thick in coils of 30 mtr ESCONSSR 2023-24 page no 23 Item code 52.01 0 0.00
Unit : Coil 0 0.00
Item Name : Supplying and fixing of CCTV Camera Matrix Make Outdoor Bullet Camera 5 MP (2560 X 1920 Pixel) Illumination Range 31-50 Meter 0 0.00
Unit : No 0 0.00
Item Name : Supplying and fixing of NVR Sparsh 16 Channels NVR with 4K(3840 X 2160)Sparsh make 0 0.00
Unit : No 0 0.00
Item Name : Supplying and fixing of Hard Disk 8 TB Storage Western Digital Windows Surveillance Hard Disk(WD8001PURP) 0 0.00
Unit : No 0 0.00
Item Name : Supplying and fixing of Power Supply HI FOCUS Port Fast Ethernet PoE Switch with 2 Gigabit Uplink,8/10/100Mb PoE RJ45 port (port 1 port 8) HI FOCUS (HF-SGS08-120W (v24.3BH)) 0 0.00
Unit : No 0 0.00
Item Name : Supplying and fixing of Led Monitor LG Flat LED Backlit LCD(Liquid Crystal Display) Computer Monitor (LG 22MP410 without speaker) 0 0.00
Unit : No 0 0.00
Item Name : Supplying and fixing of BNC Dc pin ballon coneector HI-FOCUS RG-6 for CCTV HI-FOCUS (HI FOCUS CABLES (HF 100%)) 0 0.00
Unit : No 0 0.00
Item Name : Supplying & Laying of 3+1 Core CC Camera Wire Sky Star Technology RG-11 for CCTV Sky Star Technology (3+1 cctv cable) 0 0.00
Unit : m 0 0.00
Item Name : Supplying and fixing of 25 mm PVC conduit pipe on the wall or ceiling using necessary materials like bends,junction box,elbows,screws at an interval of 300 mm as required.VPL INDIA Insulated Electrical Conduit Pipe 3 MeterVPL INDIA(VPL INDIA) 0 0.00
Unit : m 0 0.00
Item Name : Power Amplifier Supply, installation, testing and commissioning of Power Amplifier KEKROWN Amplifier with Built in Mixer with power output(RMS per channel)200-225 KEKROWN(KTA-225U) Including all lead and lifts as directed by engineer incharge of the work. 0 0.00
Unit : No 0 0.00
Item Name : Microphone Supply, installation, testing and commissioning of Microphone BEHRINGER Form Factor Handheld Microphones Minimum Frequency Response (Hz) 50 Hz-15Khz BEHRINGER (XM8500) Including all lead and lifts as directed by engineer incharge of the work. 0 0.00
Unit : No 0 0.00
Item Name : Series Microphone Supply, installation, testing and commissioning of Series Microphone Ahuja Form Factor Handheld Microphones Minimum Frequency Response (Hz) 50 Hz-15Khz Ahuja (PRO-2200SC) Including all lead and lifts as directed by engineer incharge of the work. 0 0.00
Unit : No 0 0.00
Item Name : Conference Mic's : Flush Mount,Supply, installation, testing and commissioning of Flush mount model chairman unit with gooseneck mic with ring LED and interconnection cable and out sockets for linking next unit with talk and priority switch with Delegate inter face unit aluminum.Ambani Form Factor Gooseneck Microphone Minimum Frequency Response(Hz) 50Hz-15Khz(CMD 5200 and CMC5100hairman Un Delegate Unit) 0 0.00
Unit : No 0 0.00
Item Name : Conference Mic's : Flush Mount - Supply, installation, testing and commissioning of Flush mount model delegate unit with gooseneck mic with ring LED and interconnection cable and out sockets for linking next unit with talk switch with Delegate interface unit aluminum/PVC housing Including all lead and lifts as directed by engineer incharge of the work.BEHRINGER Form Factor Goosneck Microphone Minimum Frequency Response(Hz) 50 Hz - 15Khz BEHRINGER(TA5212). 0 0.00
Unit : No 0 0.00
Item Name : Supplying of Pole Speaker stand height 92 150cm, 584cm dia base and weight 1 Kg Including all lead and lifts as directed by engineer incharge of the work. 0 0.00
Unit : No 0 0.00
Item Name : Small Stand: Supplying of microphone Small stand KEKROWN make KEKROWN Pole Speaker Stand KEKROWN (ATS-5 Podium Microphone Stand (Heavy Base))Including all lead and lifts as directed by engineer incharge of the work. 0 0.00
Unit : No 0 0.00
Item Name : Microphone Speakere Cable: Providing Laying cabling for Microphones finolex PVC Speaker cable(FINOLEX 0.75SQMM 19 AWG SPEAKER CABLE) Including all lead and lifts as directed by engineer incharge of the work. 0 0.00
Unit : m 0 0.00
Item Name : Speaker Connecting Jacks:D-Link Simplex Pigtails for Fiber Cable Connection lenth 1m D-Link (NCB-FS09S-SC1) Including all lead and lifts as directed by engineer incharge of the work. 0 0.00
Unit : No 0 0.00
Item Name : Conference Controllers - Supply, installation, testing and commissioning of Controller unit Hitune Bass Unidirectional with volume control and press to talk switch Microphone Hitune Bass(PM99CH)Including all lead and lifts as directed by engineer incharge of the work. 0 0.00
Unit : No 0 0.00
Item Name : Equipment Rack - Supplying of M.S. Rack with powder coated adjustable ShelfIncluding all lead and lifts as directed by engineer incharge of the work.HANS Metal Shelving Racks (Adjustable Type) confirming to IS 1883 Open-type (No side and back sheets) TypeHANS (METAL SHELVING RACK) 0 0.00
Unit : No 0 0.00
246 Item Code : CPWD2025SR Volume2 itm 4393 13912.5 12 No --- 166950 9.6 0.23
Item Name : Supplying of the integrated type solar PV lighting system on the existing pole structure, comprising of 20 watt, 6V Mono Passivated Emitter and Rear Contact (PERC) Solar Panel (minimum efficiency 21), Pulse with modulation (PWM)/Maximum Power point tracking (MPPT) Charge Controller in the box with a sleek appearance and a sturdy structure, is weather-proof, and is simple to install, With Lithium- Iron Phosphate Battery (LiFePO4) 3.2Volt (Cell) 24 AH battery, charging time 6-8 hours, Battery backup time 12 hours (minimum), LED fixture 20 watt, Input voltage: 12V DC , Operating temp range -15 deg to 50 deg centigrade, internalsurge protection of 5 KV L,N,E as per IEC 61000-4-5, Driver efficiency 85 ,THD 10 as per IEC 61000-3-2 , P. F. 0.95, IP-66,IK-08, CRI 80 ,under voltage and over voltage protection, Electro Magnetic Interference(EMI) Electro Magnetic Compatibility (EMC) As per CISPR 15 , lenses for beam angle as per Illuminating Engineering Society of North America(IESNA) type I/II/III as per the width of the road and the project requirement,Correlated Colour Temperature (CCT) 5700K /6000K (As per American National Standard Institute (ANSI Bin)), life time (LED,Driver & electrical circuitary) of 50K hours lamp buring hours till the 70 of initial Lumenmaintained as per LM80 extrapolation IES TM-21-11 report, automatic swichon/off, Alliuminium or Acrylonitrile Butadiene Styrene (ABS body), can be installed on a pole or wall. System lumen efficacy 120 lm/Watt output All asper pre approved by Engineer in-charge complete in all respect i/cconnections with 1.5 sq mm FRLS, PVC insulated copper conductor single core cable and earthing etc. as required.(Part 1), for fixtures up to 60 watt. LED light Complete with mounting structure for the battery and accessories and wind storm withstand capacityas per the zone. (Thermal management: heat sink of aluminium housing such that LED junction temperature shall not rise aboven 90 degree C)20 Watt (System lumen efficacy 120 lm/Watt) 0 0.00
Unit : Each 0 0.00
Item Name : Fabricating,supplyinganderectionof.mslonghotdipGalvanizedOctagonalhotdipPolewithBSEN10025gradeS355JOsteelplateforshaft,IS2062forbaseplatewithdooropeningarrangements,includingsuitableboards,BakelitesheetandMCBsasperISspecificationssuitabletowithstandthewindspeedof47m/sfor.mPoleinsinglesectionandsinglejointweldedasperIS9595/IS10178AWShavingdimensionsbottom.mm,top.mmwith3mmthick,suitablebaseplateand4Nosof.longJboltsalongwithtemplateandthePoleshallbehotdipgalvanizedinsingledippingwithnotlessthan65micronasperASTM-A123and153etc.,(excluding foundation) as per drawing appended4.2.3)5 m - Top 70 mm and Bottom 130 mm dia 0 0.00
Unit : Each 0 0.00
Item Name : Supplying,andfixingofHotdipGalvanizedM.S.BracketsuitableforoutdoorluminariesandmountedonOctagonalpoleusingnecessarybolts, nuts etc., complete4.6.3)Single Arm Bracket with 2000 mm Standard 40/50 mm dia 0 0.00
Unit : Each 0 0.00
Item Name : Supplying of Ceiling Fan with Capacitor rating As per guideline of BEE 5 star rating and IS:374/19 and also comply with IS: 1709/1984 with latest amendment, Rated voltage 220 V/50 Hz, Rated power upto 35 W +/- 10 %, Rated current As per IS:374/19, Rated power factor 0.9 lagging(min), Rated speed 350 +/- 10% RPM, Rated air delivery 210 +/- 10% Cubic Meter Minimum, Rated service value 6.2 CMM / W, Three Blades of blade leaf 1.05 mm thick Aluminium Alloy sheet, Class B motor insulation, Bearing Two ball bearings, Top 6202, Bottom 6201, as per IS specification, Motor winding. Temp rise Shall not exceed 75 deg C over and ambient of 40 0C by resistance method at 245 V, Insulation resistance Shall not be less than Two Mega Ohms (2M Ohms), Leakage current Should not exceed 210 Micro Amp, Power input, W& current, Air Delivery & Fan Speed as per IS:374/2019 with latest amendment, 2year manufacturer Warranty. (BLDC fans) 0 0.00
Unit : Each 0 0.00
250 Item Code : PWD Ele SR 2-23-24 item no 13.11 pg no 57 330.75 15 No --- 4961.25 12 0.01
Item Name : Fixing a ceiling /wall mounting fan of all capacities and all types, with necessary clamps and 'S' hook made out of 15mm dia MS rod, with 5 A. ceiling rose of approved quality with necessary length of 23/0.0076 inch PVC insulated twin twisted wire of approved quality, mounted on a suitable size wooden board and wired. 0 0.00
Unit : Each 0 0.00
251 Item Code : PWD Ele SR 2-23-24 item no 3.6.4 pg no 9 374.85 15 No --- 5622.75 12 0.01
Item Name : Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293.Stepped Fan Regulator Two Module 0 0.00
Unit : Each 0 0.00
252 Item Code : PWD Ele SR 2-23-24 item no 1.13 pg no 4 122.85 15 No --- 1842.75 12 0.00
Item Name : Supplying And Fixing Metal Fan Box with Round Hook. 0 0.00
Unit : No 0 0.00
253 Item Code : PWD Ele SR 2-23-24 item no 1.1.2 pg no 2 85.05 600 No --- 51030 480 0.07
Item Name : Open Conduit System Supplying heavy gauge PVC conduit pipe . dia . mm thick confirming to IS 2509 with suitable size bends, junction boxes, adhesive paste etc , and fixing using inverted wood plugs in case of RCC ceiling and RCC wall/ stone structure or rawl plugs in case of brick walls and cement plastering the damaged portion using heavygauge saddles at an interval of 700mm using NF screws. 0 0.00
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
Electrical works specification.doc
Others - Electrical Specification • 0.18 MB
bid document kw-4 wi 22301.docx
Tender Document • 1.16 MB
22301.xlsx
Others - Qty Format • 0.20 MB
Star Rate Circular.pdf
Others - Star Rate Circular • 0.78 MB
buildingspecification.pdf
Others - Building Specification • 0.87 MB
government notification BC LOC letter to be issued by the Bank.pdf
Others - LOC - II Format • 1.73 MB
road specification.pdf
Others - Road Specification • 1.52 MB
Download all tender documents and submit your bid