Development of Park for Physical Disable Persons in M.C. Nilokheri.(Retender)

Providing and Laying of EPDM Synthetic Track with SBR 9mm thick and EPDM granules 6mm thick of Size 1-4mm, Complete in All Respect as per direction of Engineer-in-charge.

WHEELCHAIR Providing and supplying standard manual wheelchair made of high-quality powdercoated/mild steel tubular frame with durable, corrosion-resistant finish. The wheelchair shall b? foldable type for easy storage and portability. Technical Specifications: Frame: Mild Steel/Aluminum, powder-coated finish Seat Width: Approx. 18 inches (450 mm), made of durable, washable canvas or PVC upholstery Backrest: Fixed/Foldable with reinforced support Wheels: Rear wheels: 24` solid rubber with hand rims for self-propelling Front wheels: 8` PU/solid rubber caster wheels Brakes: Manual parking brakes on both rear wheels Footrests: Foldable/Detachable, height-adjustable with heel support strap Armrests: Fixed or flip-up cushioned armrests Load Capacity: Minimum 100 kg Foldable Design: For convenient storage and transportation Warranty: Minimum 1 year against manufacturing defect

MERRY-GO-ADA?? Main Structure Material: Galvanise Steel (GI) ERW Pipes ISI Marked IS 1239 Minimum 90 mm outer diameter (OD), 2.0-3.0 mm thickness Surface Finish Zinc primer plus outdoor-grade polyester powder coating (min. 60-80 microns), Bending with fully automatic Pipe Bending Machine, Welding With Laser Welding Heigh Power Machine., Bending with fully automatic Pipe Bending Machine, Welding With Laser Welding Heigh Power Machine. Support Structure Material: Galvanise Steel (GI) ERW Pipes ISI Marked IS1239 Minimum 40 mm outer diameter (OD), 2.0-3.0 mm thickness Surface Finish Zinc primer plus outdoor-grade polyester powder coating (min. 60-80 microns), Bending with fully automatic Pipe Bending Machine, Welding With Laser Welding Heigh Power Machine., Bending with fully automatic Pipe Bending Machine, Welding With Laser Welding Heigh Power Machine. Wheel Chair Safety Door: CR sheet (1.6-2.0 mm thick) Manufacturing: CNC laser-cut with antislip perforated texture Finish: Hot-dip galvanized plus powder coating Load Capacity: Minimum 150 kg per platform. mgr Base Material: Checker Sheet 3mm Process with CNC Laser Machine, Surface Finish Zinc primer outdoor-grade polyester powder coating (min. 60-80 microns), Bending with fully automatic Pipe Bending Machine, Welding With Laser Welding Heigh Power Machine., Bending with fully automatic Pipe Bending Machine, Welding With Laser Welding Heigh Power Machine.

ARM REVOLVE ASSIST Main Frame: 0114 *3 mm thick M.S pipe and subordinate tube is of 088*3.0 large thickness M.S pipe. design. All remaining frame is made by 088 *3mm thick MS pipe. Weight plates: Rubberized moulding round weight plates are used. Weight Plates Holder with spring lock and spare weights holder: is made by hard chrome plated mild stee!048 D!A pipe open front covered with half round cap and holder end is covered with heavy quality rubber ring of OD-68 mm and ID-48 mm with 10mm wall thickness for free weight noiseless operations. Bearing: Lubricated high grade6305 `2RS`steel ball bearing. Base plate: is OD166, ID 116, and 6 mm thick. Pins: are made up of M.S bright bar. Bearing bushes: 075mm OD seamless pipe.

SIT `N` SNICKER SWING - Main Structure Material: Galvanise Steel (GI) ERW Pipes ISI Marked IS 1239 Minimum 90 mm outer diameter (OD), 2.0-3.0 mm thickness Surface Finish Zinc primer plus outdoor-grade polyester powder coating (min. 60–80 microns), Bending with fully automatic Pipe Bending Machine, Welding With Laser Welding Heigh Power Machine., Bending with fully automatic Pipe Bending Machine, Welding With Laser Welding Heigh Power Machine. Support Structure Material: Galvanise Steel (GI) ERW Pipes ISI Marked IS 1239 Minimum 40 mm outer diameter (OD), 2.0-3.0 mm thickness Surface Finish Zinc primer plus outdoor-grade polyester powder coating (min. 60-80 microns), Bending with fully automatic Pipe Bending Machine, Welding With Laser Welding Heigh Power Machine., Bending with fully automatic Pipe Bending Machine, Welding With Laser Welding Heigh Power Machine. Wheel Chair Safety Door: CR sheet (1.6–2.0 mm thick) Manufacturing: CNC laser-cut with antislip perforated texture Finish: Hot-dip galvanized plus powder coating Load Capacity: Minimum 150 kg per platform. Swing Base Material: Checker Sheet 3mm Process with CNC Laser Machine, Surface Finish Zinc primer outdoor-grade polyester powder coating (min. 60–80 microns), Bending with fully automatic Pipe Bending Machine, Welding With Laser Welding Heigh Power Machine., Bending with fully automatic Pipe Bending Machine, Welding With Laser Welding Heigh Power Machine.

CHEERFUL CHURN Main Structure Material: Galvanise Steel (GI) ERW Pipes ISI Marked IS 1239 Minimum 90 mm outer diameter (OD), 2.0-3.0 mm thickness Surface Finish Zinc primer plus outdoor-grade polyester powder coating (min. 60–80 microns), Bending with fully automatic Pipe Bending Machine, Welding With Laser Welding Heigh Power Machine., Bending with fully automatic Pipe Bending Machine, Welding With Laser Welding Heigh Power Machine. Support Structure Material: Galvanise Steel (GI) ERW Pipes ISI Marked IS 1239 Minimum 40 mm outer diameter (OD), 2.0-3.0 mm thickness Surface Finish Zinc primer plus outdoor-grade polyester powder coating (min. 60-80 microns), Bending with fully automatic Pipe Bending Machine, Welding With Laser Welding Heigh Power Machine., Bending with fully automatic Pipe Bending Machine, Welding With Laser Welding Heigh Power Machine. Wheel Chair Safety Door: CR sheet (1.6-2.0 mm thick) Manufacturing: CNC laser-cut with antislip perforated texture Finish: Hot-dip galvanized plus powder coating Load Capacity: Minimum 150 kg per platform. mgr Base Material: Checker Sheet 3mm Process with CNC Laser Machine, Surface Finish Zinc primer outdoor-grade polyester powder coating (min. 60-80 microns), Bending with fully automatic Pipe Bending Machine, Welding With Laser Welding Heigh Power Machine., Bending with fully automatic Pipe Bending Machine, Welding With Laser Welding Heigh Power Machine.

Sea-Saw Main Structure Material: Galvanised Steel (GI) ERW Pipes ISI Marked IS1239 Minimum 90 mm outer diameter (OD), 2.0-3.0 mm thickness Surface Finish Zinc primer plus outdoor-grade polyester powder coating(min. 60-80 microns), Bending with fully automatic Pipe Bending Machine, Welding With Laser Welding Heigh Power Machine. Handle and Leg rest Material: Galvanised Steel (GI) ERW Pipes ISI Marked IS1239 Minimum 25 mm outer diameter (OD), 2.0-3.0 mm thickness Surface Finish Zinc primer plus outdoor-grade polyester powder coating(min. 60-80 microns), Bending with fully automatic Pipe Bending Machine, Welding With Laser Welding Heigh Power Machine. Seat: designed for outdoor playgrounds. Crafted from durable 3 layer HDPE sheets 20 mm thik and precision router-cut for Spring: Heavy-duty coil spring, High-carbon steel or alloy spring steel, 18 mm – 20 mm wire thickness, Coil height: Approx. 300 mm. Clamps and Connectors Material: Die-cast aluminium or aluminium alloy Finish: Natural anodized or powder coated Properties: Anti-rust, tamper-resistant, non-toxic. Fasteners Material: Galvanized Iron (GI), zinc-coated Type: Tamper-proof bolts and nuts Rust Resistance: Min. 500 hours salt spray test protection: Plastic safety caps on exposed bolts.

Percentage BoQ

BoQ_Ver3.0

Name of the Bidder/ Bidding Firm / Company :

PRICE SCHEDULE (This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only )

NUMBER #

[10.100.2]Cement Concrete 1:8:16 Flooring 2. Cement Concrete 1:8:16 with stone aggregate 40 mm size in foundation and plinth. [Through Rate]

[10.8]Providing and laying of conglomerate floor 40mm thick cement concrete topping 1:2:4 [Through Rate]

[11.5.3]12 mm cement plaster of mix : 3. 1:4 (1 cement: 4 fine sand) [Through Rate]

[11.58]Providing and applying two coats white cement based putty of approved brand and manufacturer, over plastered surface and grinding the surface smooth with sand paper to get en even and smooth finish including cost and carriage of all material , labour charges, scaffolding, sundries etc. complete [Through Rate]

[11.6.1]15 mm cement plaster on the rough side of single or half brick wall of mix : 1. 1:4 (1 cement: 4 fine sand) [Through Rate]

[11.69.2]Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound ) content. 2. With water thinnable cement primer on wall surface having VOC content less than 50 grams/litre [Through Rate]

[11.74.2]Wall painting with acrylic emulsion paint, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour. 2. Two coats [Through Rate]

[13.41]Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories and stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.). [Through Rate]

[3.1.1]By Mechanical Transport including loading, unloading and stacking 1. Lime, moorum, building rubbish [3km]

[3.1.2]By Mechanical Transport including loading, unloading and stacking 2. Earth [3km]

[4.12.1]Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead up to 50 m and lift up to 1.5 m, as directed by Engineer-in-charge. 1. All kinds of soil [Through Rate]

[5.23.2]Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge. 2. Nominal concrete 1:2:4 or leaner mix (i/c equivalent design mix) [Through Rate]

[5.7.4]Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge. 4. In cement mortar [Through Rate]

[6.1.2]Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work below plinth level and up to Floor IV level: 2. 1:2:4 (1 cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 20 mm nominal size) [Through Rate]

[6.14.1]Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : 1. 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III): 3 graded stone aggregate 20 mm nominal size) [Through Rate]

[6.15.1]Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor four level, excluding cost of centering, shuttering, finishing and reinforcement : 1. 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size) [Through Rate]

[6.16]Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor four level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size). [Through Rate]

[6.30.1]Centering and shuttering including strutting, propping etc. and removal of form for 1. Foundations, footings, bases of columns, etc. for mass concrete [Through Rate]

[6.30.3]Centering and shuttering including strutting, propping etc. and removal of form for 3. Suspended floors, roofs, landings, balconies and access platform [Through Rate]

[6.30.6]Centering and shuttering including strutting, propping etc. and removal of form for 6. Columns, Pillars, Piers, Abutments, Posts and Struts [Through Rate]

[6.33.6]Steel reinforcement for R.C.C. work, where not included in the complete rate of RCC, including straightening, cutting, bending, placing in position, binding, wastage, overlaps, welded joints, spacer bars, chairs, stays, hangers and annealed steel wire etc. complete in all respect below plinth level Note: Reinforcement shall be measured in length including hooks, if any, separately for different diameters as actually used in work , excluding overlaps. Wastage, overlaps, couplings, welded joints, spacer bars, chairs, stays, hangers and annealed steel wire or other methods of binding & placing shall not be measured and cost of these items shall be deemed to be included in the rates for reinforcement. 6. Thermo-Mechanically Treated bars of grade Fe-500D or more [Through Rate]

[7.20.2]Brick work with common burnt clay modular bricks of class designation 10.5 in foundation and plinth in: 2. Cement Mortar 1:6 (1 cement : 6 coarse sand) [Through Rate]

[7.22.2]Brick work with common burnt clay non-modular bricks of class designation 10.5 in superstructure above plinth level up to floor IV level in all shapes and sizes in : 2. Cement mortar 1:6 (1 cement : 6 coarse sand) [Through Rate]

Please Enable Macros to View BoQ information