PETTY REPAIRS OF E/M WORKS AND OTHR MISC WORKS TO 71 RMU, 820 SU,

Amount

Dismantling of wall and ceiling boards (fibre, pulp, insulation. etc) or insulation boards/ slabs/blankets, any thickness, includinguding cover fillets all as specified and directed.

S&F for 12mm thick Gypsum board to be fixed as in ceiling including necessary clips, including drilling holes to existing roof slab and applying two coats of oil bound distemper including chalk whitening and priming in alkali resistant including preparing the surface complete all as specified

S&F in position premium sand textured finished mineral fibre acoustical ceiling tiles of size 600x600x16mm thick and placed on GI grid powder coated snap grid ceiling 600x600 module consisting of wall angle section19x19 mm and tee section with web height of 38mm and flange 15mm (colour white) (having rotary stitching on all T Section) with suspension system as shown in sketch 'B' and as approved by GE Note : (i) Ceiling tiles shall be of make Armstrong brand "DUNE RH99 (Bevelled/Tegular) or equivalent brand of make as specified in Appendix 'B' to particular. (ii) Thickness og GI section shall not less be less than 3mm and shall be procured from the tile manufacturer. (iii) Section and hanging system shall have galvanising of minimum 90 grams per sqm and same make of tile. (iv) Work shall be executed by manufacturer's authorised vendor.

Dismantling of floor,hearth or wall tiling includinguding cement mortar bedding but not backing and rubbish off the premises.

M&L for Virified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match in floor etc set and jointed in neat cement slurry and pointed in white as coloured cement to match over and including 15mm thick screed bed in cement mortor (1:6) complete all as specified and directed

M&L for Virified Ceramic tiles 10 mm thick as skirting (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match in floor etc set and jointed in neat cement slurry and pointed in white as coloured cement to match over and including 1) complete all as specified and directed

M&L for Non skid ceramic jointless coloured tiles 7 to 8mm thick (square/ rectangular) area of each tiles exceeding 0.06 sqm but not exc 0.09 sqm, in floors etc. set and jointed in neat cement slurry and pointed with white as coloured cement to match over and including 15mm thick screed bed in cement mortor (1:6) complete all as specified and directed.

M&L for glazed ceramic tiles in vertical surfaces of size 450x350x7mm thick set and jointed in neat cement slurry and pointed with white or coloured cement to match over and including rendering 10 mm thick in cement mortor (1:4) on vertical surface as in backing coat all as specified and directed.

M&L for non-skid Heavy duty endura tile 300x300x10-12mm thick coloured joint free in floors etc set and jointed in neat cement slurry and pointed in coloured cement to match over and including 15 mm thick screed in cement mortar 1:4 complete all as specified and directed.

Taking down cement plaster on brick or stone walls, etc, incl raking out joints, hacking for key, scrubbing down with water, etc & prepare to receive new plaster complete all as specified and directed

M&L for rendering 5mm thick in CM 1:3 finished even and smooth with out using extra cement in ceiling complete all as specified and directed

M&L for 15mm thick rendering in CM 1:6 on fair faces of brick work, surfaces finished even and fair without using extra cement complete all as specified and directed

M&L for 15mm thick rendering in CM 1:4 on fair faces of brick work, surfaces finished even and fair without using extra cement complete all as specified and directed

Demolition of brickwork or stone boulder masonry, built in cement mortar including all quoins, arches, pillars, etc., but excluding ashlar facings, dressed stonework and precast concrete articles all as specified and as directed.

M&L for Brickwork with subclass "B" bricks, straight or curved on plan exceeding 6m mean radius built in cement mortar 1:6 of using class designation 100 of bricks in lieu of 75all as specified and as directed.

M&L for Finishing walls with Acrylic Smooth weather proof exterior emlusion paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) approved shade of colour obtain smooth finish etc by using roller brush complete all as specified and directed.

M&L for wall care putty white 1.50 mm thick (to achieve smooth surface) for new plaster surface of wall complete. all as specified and directed.

M&L for Preparation of new plastered surface of wall and applying two coats of oil bound distemper over a coat of primer birla white care Putty on wall obtain smooth finish etc including balance area complete removal.

M&L for Preparation of new plastered surface of ceiling and applying two coat of Oil bound distemper on ceiling surface by using roller brush complete all as specified and directed

M&L for Preparation of old distemper surface by washing, rubbing down and stopping of distemper and painted surface and applying one coat oil bound emulsion on wall surfaces white or tinted

M&L for Preparation of old sufrace applying one coat of Oil bound distemper on ceiling surface complete all as specified

M&L for Preparation of old plaster surface of wall applying one coats of Appx exterior emulsion paint (Asain paint) on wall surfaces with spray painting machine complete all as specified and directed.

M&L for complete removing of existing treatment on wall surface and applying two coat of OBD birla white care Putty 1.50 mm thick on wall obtain smooth finish etc complete all as specified and directed.

Dismantling water tanks 500 ltrs all as specified and directed

S & F in repairs 500 litres capacity rotational moulded polyethylene water storage tanks triple layer,white colour (Cylindrical vertical with closed top) hoisted and fixed in position including dismantling all as specified in SSR Part I complete all as specified and directed

S & F in repair Rotational moulded polye thylene water storage tanks cover (cylindrical vertical with closed top) fixed in position all as specified and directed

Dismantling water tanks Exc 500 and n.exc1000 ltrs all as specified and directed

S & F in repairs 1000 litres capacity rotational moulded polyethylene water storage tanks triple layer,white colour (Cylindrical vertical with closed top) hoisted and fixed in position including dismantling all as specified in SSR Part I complete all as specified and directed

Cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes, etc. capacity exc 250 ltrs n. exc 500 Ltrs and disconnecting existing tanks settign aside (or lowering if required) for repairs, cleaning etc and hoisting if reuiqred reconnecting and refixing in position. all as specified and directed.

Cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes, etc. capacity exc 500 ltrs n. exc 1000 Ltrs and disconnecting existing tanks settign aside (or lowering if required) for repairs, cleaning etc and hoisting if reuiqred reconnecting and refixing in position. all as specified and directed.

S&F in repair Ball valves, high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed (minimum weight 210 gms) of bore of pipe 15mm complete all as specified and as directed.

S&F in repair Ball valves, high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed (minimum weight 210 gms) of bore of pipe 20mm complete all as specified and as directed.

Taking up or down 15 mm dia steel tubing and connections including cleaning for refixing or removal to store complete all as specified and directed.

Taking up or down 20 mm dia steel tubing and connections including cleaning for refixing or removal to store complete all as specified and directed.

Supply and fixing 15 mm bore galvanised steel water tubing 'medium grade' with all fittings and fixed to walls, ceiling or laid in floors etc. complete all as specified and directed.

Supply and fixing 20 mm bore galvanised steel water tubing 'medium grade' with all fittings and fixed to walls, ceiling or laid in floors etc. complete all as specified and directed.

Demolition of cement concrete (un-reinforced) in ground floors and pavings not exceeding 15cm thickness (below and above ground level) and removing the unserviceable materials to a distance not exceeding 100m all as specified and as directed.

M & L for chequered cement concrete with tiles of size 20cm x20cm x 25 mm thick screed bed in CM 1:6 set jointed and pointed in neat cement slurry and pointed with coloured cement to match.

M&L for Cement concrete 1:4:8 type D-2 (using 40mm graded stone aggregate) as in Sub base flooring/mass concrete/foundation or floor complete all as specified and directed

M&L for 75mm thick for PCC 1:3:6 type C-1 as in plinth protection , complete all as specified and directed

S&F in repair One piece Vitreous china wash down water closet (Pedestal Pattern) size 645mmx35mmx730mm 'white' with soft close seat cover & twin flush fittings, toilet paper holder, health faucet, PVC connection, angular stop cock (valve) (2 Nos) with flange etc all as specified in Particular specifications. Note : Vitreous china wash down water closet (Pedestal Pattern) cat Part No. CURATOR S1013132 S trap 250mm of 'Cera' or equivalent model of make specified in Appendix 'B' to particular specifications.

S&F in repair vitreous china wall hung wash hand basin with pedestal snow white miniumum size 630mmx450mm including chromium plated brass coupling, bottle trap, chromium plated brass centre hole basin mixer, 450 mm PVC braided connection (two numbers), angular stop cock ( valve) (two numbers) complete all as specified in particular specifications. Note : Vitreous china wall hung wash hand basin cat Part No. CONCORD S2040112, Pedestal cat part No S2090107 & chromium plated brass centre hole basin mixer cat part No F2002461 of 'Cera' or equivalent model of make specified in Appendix 'B' to particular specifications.

S&F in repair 600mmx450mm and 6mm thick bevelled edge looking mirror fancy type mounted on 6mm thick backing comercial plywood fixed with CP plug with chromium plated brass screws and cup washer fioxed on wall complete.

S&F in repairs plastic water closet sheet cover of any color closed pattern with flat bottom and cover and MS chroumium plated or aluminium hinges devices etc. Complete all as specified and directed.

S&F in repairs Vitreous china wash down water closet pan (pedestal pattern) white (excluding flushing cistern and flush pipe) and including fixing of the following components viz. pedestal pan with "P" or "S" trap, seat and cover for pedestal pan, flushing cistern, brackets, chain and pull or lever handle, flushing pipe including jointing to socket of flushing rim and connecting pipe to union of flushing cistern, inlet and overflow pipe, anti-syphonage pipe or stopper fixed as in repairs complete all as specified and as directed. Note:- Flushing cistern and flush pipe as required shall be measured and paid for under supply only separately.

S&F in repairs Vitreous china sqatting pan, "Orissa" pattern, size 580mm x 440mm white, with integral foot rests (excluding flushing cistern and flush pipe) and including fixing of the following components viz. squatt pattern pan with loose cast iron or vitreous chinaware, "P" or "S" trap, seat, flushing cistern, brackets, chain and pull or lever handle, flushing pipe including jointing to socket of flushingrim and connecting pipe to union of flushing cistern, inlet and overflow pipe, anti-syphonage pipe or stopper, setting the trap in and pan in lime concrete, 150mm minimum thickness and finished just below level of rim of pan to receive floor finishing fixed as in repairs complete all as specified and as directed. Note:- Flushing cistern and flush pipe as required shall be measured and paid for under supply only separately.

S&F in repair Vitreous China Urinal, full stall type, white (including flushing cistern, flush pipe and waste pipe complete all as specified in particular specifications.

S&F in repair HEALTH FAUCET (ABS body) mild steel chrominium plated suitable for 15mm dia pipe with 1.25 mtr long flexible tube and ABS wall hook including making fixed in position complete all as specified and directed. as in repairs complete all as specified and as directed.

S&F in repairs PVC valve less, syphonic action type, white low level flushing cistern of capacity 10 litre with inlet ball valve float and handle including brackets and 32 mm dia PVC flush pipe complete all as specified and directed

S&F in repairs 600mm long between flanges brass chromium plated towel rack with brackets fixed to wall with chromium plated brass screws complete all as specified in particular specifications. Note :- (i) Towel rack cat part No F5002101 of Cera or equivalent model of make as specified in Appendix 'B' to Particular specifications as in repairs complete all as specified and as directed.

S&F in repair grating doom 100mm dia of CP (Minimum weight 60 Gms) complete all as specified and directed

S&F in repair Stop valves, fancy type, chromium plated with long shank and cup (concealed type) cast copper alloy, screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions of bore of pipe 15mm as in repairs complete all as specified and as directed.

S&F in repair PVC connections 15mm size with PTMT nuts of length 450mm as in repairs complete all as specified and as directed.

S&F in repair 15 mm Bib tap long body with wall flange fancy type chromium plated brass screwd for iron pipe with capstain head complete all as specified and directed

S&F in repair Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure with or without lettered ‘Hot’ or ‘Cold’ with long screwed shanks and fly nuts, screwed for iron pipe of bore of pipe 15mm fixed as in repairs all as specified and as directed.

S&F in repair waste fittings, brass, chromium plated for glazed ware basins etc., with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end fixed of bore of pipe 32mm all as specified and as directed.

Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories).

S&F 75 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed.

S & F of 110 mm dia(SWR) pipes single socketed, in any length with rubber ring joints fixed to walls complete all as specified and directed

S&F in repair single hole brass CP WHB mixer cock 15mm dia complete all as speicifed and directed

S&F in repair CP brass hot and cold mixer with legs non telephonic fixed in wall for bathroom complete all as specified and directed

S&F in repairs vitreous china wash hand basin, flat back of size 550x400 mm etc complete all as specified and directed.

S&F in repairs PVC connections 600mm long with chuck nuts etc complete all as speicifed and directed

S&F in repair PVC waste pipe of 32mm dia suitable for WHB, kitchen sink complete all as specifed and directed

S&F in repair toilet cabinet PVC with mirror and shelves (600x450) etc complete all as specified and directed

S&F in repair CP fancy type towel ring complete all as specified and directed.

S&F in repair CP vitreous china soap dish fancy type complete all as specifed and directed.

S&F in repair 600mm long fancy type towel rail with brackets etc complete all as specified and directed.

S&F in repair CP brass hand shower with flexible pipe & connection complete all as specifed and directed.

S&F in repair fancy type glass corner shelf with CP brackets etc complete all as specifed and directed.

S&F in repair Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 120mm (minimum) wide with chromium plated brass bracket guard and railing 600mm long complete.

S&F soft rubber beading size 35x4mm fixed with nails or suitable adhesive complete all as specified and directed.

S&F in repair 18mm thick celuka PVC sheet minimum 600 Kgbm density grade 1 quality of both side plain white colour rigidlam glossy finish fixed with screws, solvent cement/adhesive as per manufacturer instructions to make kitchen cabinet sides top and bottom and shelves inside the cabinet complete as per specifications and as directed by the Engineer-in-Charge. Note:- (i) Cupboard accessories i.e. fittings, handles, hinges, will be measured and paid for seperately as supply only under respective of this schedule. (ii) Quoted rates deem to be include fixing of cabinet on wall with appropriate rawl plug/ dash through fastener (hammer type). (iii) Fabrication and installation of cabinet to be carried out by authorised vendor of manufacturer only.

S&F in repair 18mm thick celuka PVC sheet minimum 600 Kgbm density grade 1 quality one side pre-laminated and other side plain white colour to make kitchen cabinet/drawer shutters fixed with screws, solvent cement/adhesive as per manufacturer instructions complete as per specifications and as directed by the Engineer-in-Charge. Note:- (i) Cupboard accessories i.e. fittings, handles, hinges, will be measured and paid for seperately as supply only under respective of this schedule. (ii) Quoted rates deem to be include fixing of cabinet on wall with appropriate rawl plug/ dash through fastener (hammer type). (iii) Colour and design of prelaminated portionshall be as approved by GE. (iv) Fabrication and installation of cabinet to be carried out by authorised vendor of manufacturer only.

S&F in repair galvanized aluminium alloy wire cloth 0.45 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with tinned tacks or galvanized with aluminium wire stapples complete all as specified and directed

Hacking out old broken glass (any thickness, size, quality or description) from wooden frames, glazed with putty or fixed with beads complete all as specified and as directed.

S&F in repair 3 mm thick Sheet glass, ordinary quality and glazing with oil putty in squares not exceeding 0.5 sqm each pane complete all as specified and as directed.

S&F in repair 5 mm thick Sheet glass, ordinary quality and glazing with oil putty in squares not exceeding 0.5 sqm each pane complete all as specified and as directed.

S&F in repair Aluminium (powder coated) frame for sliding windows, side hung windows ventilators and door with necessary joining cleats, fastner etc to fix in existing opening complete Notes : (i) Thickness of powder coating (epoxy polyster) shall not be less than 50 micron. (ii) Shade/tint of powder coating (epoxy polyster) shall be as approved by GE. (iii) Gaps between frame and masonary/cill/lintel to be filled with silicon gel for water tightness. (iv) Rates quoted includes making good of jambs, soffits and cills etc.

S&F in repair Door closer, hydraulically regulated, designation No 3 universal type, suitable for door shutter of 851 to 1000mm in width and of wight between 61 to 80Kg and fixed, aluminium (die cast) body, all as specified and as directed.

S&F in repair double action floor spring hydraulically regulated made up of minimum 1.25mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, covering pivot made of brass, other made of mild steel heavy duty and fixed.

S&F in Repair venation blind vertical type level or ultima 100mm width of strip with necessary pulling threads aluminium channel along with all arrangement fixed to wall completed all as specified & directed.

S&F in repair 150mm Extruded brass handles, fabricated type polished all as specified and as directed.

S&F in repair Brass, sliding door bolt with sand or die-cast brass hasp, staple (bolt type) and fixing bolt with rolled or drawn brass bolts and fixed and fixed of length of bolt 300mm all as specified and as directed.

S&F in repair Brass barrel tower bolts, with cast or sheet barrel and rolled or cast bolts and fixed length of bolt 200mm all as specified and as directed.

M&L for French polishing on old surfaces of any description, width or girth including cleaning and preparing the surface including a coat of wood filler on new work with one coat on wooden surface complete all as specified & directed.

Resecuring without taking down frames with shutters (without taking off shutters from the frames) exceeding 1.5 sqm and not exceeding 4.0 sqm wooden door all as specified and as directed.Note:- Supply only hinges and inserts as required shall be measured and paid separately.

Repair anodised aluminium doors (sliding/ hanging type) , butt hinge handle, jointing cleats glazing cleats, rubber packing, anodised aluminium shape beading screws etc all as specified and directed.

M & L for preparation of old treated wooden of any description over 10cm width or girth and applying one coat of synthetic varnish complete all asspecified and directed

All as per Item No-89 above but on steel surfaces

M&L for preparation and writing letters or figures (block, Roman, Italic or Indian) n.exc 30 CM heinght on plaster/concrete wall/path over coat of ACE as matching with existing pattern complete all as specified & directed

Taking down chowkats or frames exc 1.5sqm but not exc 4 sqm each (with taking off shutters from the frame) removing from site complete all as specified and directed

Taking down chowkats or frames not exc 1.5 sqm each (without taking off shutters from the frames) & removing from site complete all as specified and directed

S&F in repair drapery rod 19 mm inner dia (wall thickness not les than 1.6mm) stainless steel fancy type bracket fixed with rawl plug or screw on walls/beam and shall be provided with fency finial at ends as approved by Garrison Engineer complete all as specified and directed. Note :- (i) Drapery rod Cat Part No. SW-06 of Vista or equivalent model of make as specified in Appendix 'B' to Particular specifications.

S&F in repair curtain brackets mild steel with matching with the curtain rod complete all as specified and directed Note :- (i) Drapery rod Cat Part No. SW-06 of Vista or equivalent model of make as specified in Appendix 'B' to Particular specifications.

S&F for Framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; frame work of water tanks and similar work con- forming to Fe.290.Gde-E-165

Dismantling of Asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings complete all as specified and directed.

S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified complete all as specified and directed.

S&F solid PVC door frame of size 50x47mm made out of 5mm PVC sheet reinforced with MS square tube all as specified and directed including making good to the surfaces.

S&F factory made solid panel PVC door shutter 30mm thick (Style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles & plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail ; panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading & jointed together with solvent cement, supply & fixing in the frame at site as per SSR specifications & diagram/product drawing shown on sl page NO 146 of SSR Part II with the size of door shutter as required & directed by the Engr-in-Charge.

S&F Flush shutters 30mm thick, solid core construction, with block board core & plywood face panels, commercial type on both sides complete all as specified and directed.

S&F in repair Aluminium anodised barrel tower bolts of extruded section of length of bolt 200mm all as specified and as directed.

S&F in repair butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21 of size 100mm all as specified and as directed.

S&F in repair Aluminium handles, cast type, anodised of size 100mm all as specified and as directed.

S&F in repair Aluminium alloy, anodised, sliding door bolts with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed of length of bolt 300mm all as specified and as directed.

Attending complaint and rectifying any type of fault in internal electrification such as decarbonising connection in the DBs checking for disconnections any burning due to over loading in DBs and restoring electric supply,checking and repair of switch sockets, MCBs any type, repair of tube light fitting, any type, by replacement of worn out ballast, bipin holder, starter, worn out wire, repair of faulty fan by disconnecting and replacement of worn out part such as capacitor, fan regulator, worn outwire, repair of lamp by replacement of worn out holder wire, earthing, repair replacement of electric bell/buzer/bell push and other internal accessories i.e. switch socket etc. which needs to serviceable the electric supply. Note :- .(i). Contractor shall be provided necessary T&P such as ladder, Earth, tester, Insulation tester, drill machine during rectification fault and nothing extra shall be paid to him on this account (ii). The cost of insulation tape shall be deemed to be included in the unit rate quoted against relevant item (iii) Complaint will be attended immediately as and when noted day and night

Supply only single pole and neutral enclosure with a two pin earth plug and socket complete with one single pole MCB 20 Amp complete all as specified and directed.

Supply and fix in repair LED batten luminaire surface mounted, 4 feet system wattage of 20 Watts, > 2200 systems lumen outputwith lifetime of 50000 burning including connecting up with PVC sheathed 1.5 sqmm 3 core copper conductor flexible wire from ceiling rose to fitting fixed complete all as specified and directed.

Supply and fix in repair LED batten luminaire surface mounted, 2 feet system wattage of 10 Watts, > 1000 systems lumen outputwith lifetime of 50000 burning including connecting up with PVC sheathed 1.5 sqmm 3 core copper conductor flexible wire from ceiling rose to fitting fixed complete all as specified and directed.

Supply only Surface /ceiling mounted, round LED down light fitting 18 watts with die cast aluminium housing including connecting up with PVC sheathed 3 core 1.5 Sqmm copper conductor flexible wire fixed complete all as specified and directed.

Supply and fix in replacement 18 Watt LED tube 4 pin type ultra bright LED PL-L with high efficacy suited for installation in existing 2G11 lamp holder Havells cat part No-PLL419TL18WLED865SPC of equivelent make of Bajaj and Crompton

Supply and fix LED Tube rod fittings 4 feet long single side connection complete all as specified and directed.

Supply and fix in repair 2x2 LED fitting recess mounting flate panel 36 watt, down light 240 volt 50 Htz 150 lumen/watt comprising driver locking arrangement prewired completely.

Supply only 14W LED Bulbs, high energy efficiency LED luminaries to be fitted on existing holders 240 V,50 Hz

Supply only 9 W LED Bulbs, high energy efficiency LED luminaries to be fitted on existing holders 240 V,50 Hz,

Supply only replacement of capacitor 3.15 Mfd, 240 V complete all as specified and directed.

Supply only replacement of capacitor 2.5 Mfd, 240 V complete all as specified and directed.

Supply only batten holder including with connections complete all as specified and directed.

Supply only switch piano flush button type single pole one way 6 Amps all as specified.

Supply only socket piano outlet 6 Amp flush button type all as specified

Supply only bell push single pole 6 Amps all as specified

Supply only switch piano flush button type single pole 16 Amps.

Supply only socket piano outlet, 2 in 1, 3 pin 6 and 16 Amp single pole .

Supply only Ceiling fan regulator electronic step switch type 120 Watt 230/250 Volts single phase complete. :

Supply only switch Modular type 6 Amps one way 230V AC complete all as specified and directed by Engineer in charge.

Supply only Modular socket outlet 5 pin 6 Amp socket 2 moduler complete all as specified and directed by Engineer in charge.

Supply only switch Modular type 16 Amps one way 230V AC complete all as specified and directed by Engineer in charge.

Supply only Modular socket outlet 5 pin 6/16 Amp universal socket 2 module complete all as specified and directed by Engineer in charge.

Supply only Modular five stepped type electronic fan regulator 2 module 230V AC complete all as specified and directed by Engineer in charge.

Supply & fix in replacement PVC box comprising of switch socket combination multi - purpose 5 pin, 6/16 Amp box type complete all as specified and as directed.

Supply & fix in replacement PVC box comprising of switch socket combination multi - purpose 3 pin, 6 Amp box type complete all as specified and as directed.

Supply only ceiling rose surface PVC 65x50 mm type with three terminals. (For Exhaust Fans)

Supply only relacement plug top 16 Amps 3 pin 230- volts

Supply only relacement plug top 5 Amps 3 pin 230- volts

Supply only Electric bell Ding-Dong AC 230 Volt etc complete all as specified and directed.

Supply only MCCB 160 Amp 4 pole 16 KA at 415 V with fixed thermal magnetic release complete all as specified directed.

Supply only MCCB 100 Amp 4 pole 16 KA at 415 V with fixed thermal magnetic release complete all as specified directed.

Supply only Single pole MCB 6 to 32 amp, 240 v, 50 Hz AC Made from moulded self-extinguishing thermostat plastic and suitable for 10 KA breaking capacity, complete all as specified and directed.

Supply only in repair MCB SPN 40 Amps 240 volts 10 KA 50 HZ 'C' curve complete.

Supply only in repair MCB SPN 32 Amps 240 volts 10 KA 50 HZ 'C' curve complete.

Supply only in repair MCB TP 63 Amps 240 volts 10 KA 50 HZ 'C' curve complete.

S&F in replacement PVC cable copper conductor multi strandrad flexible 23/76 twin core and making connections from ceiling rose to fan complete all as directed.

Supply and fix in replacement 1.5 Sqmm FR PVC insulated stranded copper conductor cable 1100 volts grade all as specified and directed.

Supply and fix in replacement 2.5 Sqmm FR PVC insulated stranded copper conductor cable 1100 volts grade all as specified and directed.

Supply and fix in replacement 4.0 Sqmm FR PVC insulated stranded copper conductor cable 1100 volts grade all as specified and directed.

Supply and fix in replacement 6.0 Sqmm FR PVC insulated stranded copper conductor cable 1100 volts grade all as specified and directed.

Supply and fix in repair 10.0 Sqmm FR PVC insulated stranded copper conductor cable 1100 volts grade all as specified and directed.

Supply and fix in repair PVC gang box ISI marked three module for mounting one 5 amp socket & switch

Supply and fix in repair PVC gang box ISI marked three module for mounting one 15 amp socket & switch

Supply and fix in repair PVC gang box ISI marked six module for mounting two 5 amp socket & three switch

Supply and fix in repair PVC gang box ISI marked 8 module for mounting three 5 amp socket & three switch

M&L for 06 mm thick plywood, grade BWR, type BB, fixed with nails, fixed in repairs complete all as specified and directed.

Preparation for old decorated plastered or unplastered wall surfaces and applying one coat of cement based paint on wall complete all as specified and directed.

Note :- Credit shown in credit schedule of tender document shall be considered by the tenderer while quoting the rates of various items of this schedule. The same shall be recovered from various payment to contractor before handing over old material.

HIMANSHU TRADERS

bharat construction

M/S SATISH KUMAR

M/S V K MEHROTRA

M.R. ENTERPRISES

Pleiad Complex On

MOHAMMAD RIZWAN CONTRACTOR