Repair/Renovation of Superintending Engineer Hydraulic Circle Udhampur Residential Quarter. (Renovation of Toilets etc)

Amount

Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc complete

Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc complete

White washing with lime to give an even shade: 13.96.1 Old work (two or more coats)

Distempering with dry distemper of approved brand and manufacture (one or more coats) and of required shade on old work to give an even shade

Finishing walls with water proffing cement paint of required shade: 13.117.1 old work (one or more coats applied @ 2.20 kg/10 sqm) over primary coat of primer applied @ 0.80 liters/ 10 sqmcomplete including cost of priming coat

Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth upto 30 cm measured at a height of 1 m above ground level and removal of rubbish upto a distance of 50 m outside the periphery of the area cleared

Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge (Note: But hinges and necessary screws shall be paid separately). Second class teak wood. c) 35 mm thick for doors shutters

Renewing glass panes, with putty and nails wherever rencessary including raking out old putty. Float glass panes of thickness 4.00mm (weight not less than 10 Kg/Sqm)

Renewing glass panes, with wooden fillets werever necessary: Float glass panes of thickness 4.0 mm (Weight not less than 10 Kg/sqm)

Providing and fixing wire gauze shutters using galanizeed MS wire guage of average width for aperture 1.4 mm in both directions with wire of dia 0.63 mm for doors, windows and clerestory windows with ISI marked M.S pressed butt hinges bright finished of required size with necessary screws as per direction of Engineer in charge . second class teak wood

Supply and fixing C.I Cover 300 x 300 mm without frame for guylly trap (Standard partner) the weight of cover to be not less than 4.5 Kg

Providing and fixing of PVC pipes for sprouts including fixing with clamps with the walls (Iron Clamps) (4 No's PVC pipes with Clams 3' Dia

Providing and fixing wash basin with CI Bracktes, 15 mm CP bras pillar taps 32 mm C.P brass weaste of standard pattern. Inclduing painting of fittings and brackets, cutting and making good the walls wherever required. White vitresours china surgeon type wash basin size 660 x 460 mm with a pair of 15 mm CP brass pillar taps with elbow including operated levers.

Providing and fixing white vitreous china pedestal for wash basin comopletely recessed at the back for the reception of pipes and fitting.

Providing and fixing PVC waste pipe for sink or wash basin including PVC waste fitting complete 32 mm dia

Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with 6 mm thick hard borad backing. Recetangular shape 453 x 357 mm

Providing and fixing 15 mm nominal bore CP. Brass angle valve for basin mixer and geysor points of approved make conforming to IS: 8931

Providing and fixing 15 mm nominal bore CP. Brass long nose big cock of approved auality confirming to IS standards and weightting not less than 810 gms

Providing and fixing 15 mm nominal bore CP brass bib cock of approved quality conforming to IS: 8931

Providing and fixing white vitreous china pedestal type water closet (European type W.C pan) with seat and lid. 10 liter low level white PVC flushing eastern. Including flush pipe with manually controlled devide (Handle lever). Conforming to IS: 7231, with all fittings and fixtures complete. inclduing cutting and making good the w3alls and floors wherever required: W.C pan with ISI marked white solid plastic seat and lid

Providing and fixing 08 mm dia CP/ SS. Jet with flexible tube upto 1 meter long with S.S triangular plate to European type W.C of quality and make as approved by Engineer-in-Charge

Painting with oil type wood preservative of approved brand and manufacture on old work (one or more coats)

Painting with synthetic enamel paint of approved brand and manufacture of requried colour to give an even shade, one or more coats on old work

Grills

Dismantling doors, windows and clerestory windows (Steel or wood) shutter including chowkhats, architrave, holdfastes etc complete and stacking within 50 meters lead: of area of 3 sqm and below

Providing and fixing ISI marked oxidized MS handles conforming to IS: 4992 with necessary screws etc complete

Providing and fixing ISI marked oxidized MS tower bolt black finish. (Barrel type) with necessary screws etc complete

Providing and fixing oxidized MS casement stays (straight peg type) with necessary screws etc complete. 200 mm weighting not less than 120 gms

Providing and fixing bright finished brass handging type floor door stopper with necessary screws etc complete

Providing and fixing 600 x 120 x 5 mm glass shelf with edges round off supported on anodized aluminium angle frame with C.P brasss brackets and guard rail complete fixed with 40 mm long screws, rawl plugs etc complete.

Providing and fixing PTMT liquid soap container 109 mm wide, 125 m high and 112 mm distance from wall of standard shape with brackets of the same materials with snap fittings of approved quality and colour, weighting not less than 105 gms

Providing and fixing PTMT towel ring traerzoidal shape 215 mm long 200 mm wide with a minimum distance of 37 mm from wall face with concealed fitting arrangements of approved quality and colour, weighting not les than 88 gms

Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangements of approved quality and colour. 450 mm long towel rail with total length of 495 mm, 78 mm wide and effective height of 88 mm weighting not less than 170 gms

Providing and fixing CP brass shower rose with 15 or 20 mm inlet. 150 mm diameter,

Supply and installation of 150 AH, 12 V battery for invertor make (Luminous, exide, Amron)

Supply and installation of 1 KVA invertor make, luminous / microtech

Supply and installation of water storage heater (Gyser) make havels, jaquar.

Capacity25 Liters = 02 nos

Capacity 03 Liters (Instant) = 01 no

Supply and installation of cellings fans sweep along with 1' x 6" long fan road, preferred 1200 mm make as per list approved i.e Havels, Orient, Crompton etc

Supply and installation of Exuhast fan 300 mm size (Metellic) make Havelsm orient, Crompton etc

Repair to electrical wiring including replacement of damaged/ rotten switches/ Sockets etc Wherever required

VARUN MAGOTRA

Ravinder Kumar Govt Contractors