Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹36.4 LAccepted-AOC | L1 | Accepted-AOC ACCEPT | |
| 2 | L2₹38.8 L+₹2.0 L (5.55%)Rejected-AOC | L2 | Rejected-AOC REJECT | |
| 3 | L3₹39.0 L+₹2.2 L (6.07%)Rejected-AOC | L3 | Rejected-AOC REJECT | |
| 4 | L4₹39.2 L+₹2.5 L (6.76%)Rejected-AOC | L4 | Rejected-AOC REJECT | |
| 5 | L5₹39.6 L+₹2.9 L (7.92%)Rejected-AOC | L5 | Rejected-AOC REJECT |
Tender Value
₹35 L
EMD Value
₹70,000
Closing Date
3 Aug 2020, 6:00 pmClosed
GARRISON ENGINEER I GOS
GARRISON ENGINEER I GOPALPUR MILITARY STATION PO GOLABANDHA DIST GANJAM ODISHA 761052
REPAIR REPLACEMENT TO PLUMBING SANITARY FITTING FLOOR WALL TILES ELECTRICAL FITTING AND FIXTURES OF CERTAIN BLDG OF 28 AD REGT 707 TSU 955 AD REGT WKSP LT AD BTY AND DEPOT BTY AT ZONE B AREA UNDER GE I GOS
2020_MES_358684_1
8000/10/20-21/0909/E8
Open Tender
Civil Works
Item Rate
270 days
GARRISON ENGINEER I GOS
As per tender documents
6 documents required · 6 mandatory
₹500
Yes
GARRISON ENGINEER I GOS
₹70,000
Yes
18 Sept 2020
6 Jul 2020
5 Aug 2020
6 Jul 2020
3 Aug 2020
21 Jul 2020
Amount
Demolition of cement concrete un reinforced in ground floor and paving n exc 15cm thick (below or above ground level) complete all as specified and directed.
M & L for PCC 1:2:4 type B-0 using 12.5 mm graded stone aggregate as in sub base flooring 100 mm thick surface finished even and smooth to receive the topping layer complete all as specified and directed.
M & L for Machine cut kota stone slab flooring mirror finished 20-25 mm thick (each slab not less than 0.25 Sqm) over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including 20 mm thick screed bed or bedding layer in cement mortar 1:4, including rubbing and polishing complete all as specified and directed.
M & L for Machine cut kota stone in riser of steps, skirting, dado and pillar mirror finished 20-25 mm thick over cement base rendering laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including 15 mm thick rendering in cement mortar 1:4, including rubbing and polishing complete all as specified and directed.
Dismantling floor, hearth or wall tiling including cement mortar bedding etc (but not backing) and removing rubbish off the premises complete all as specified and directed.
M & L for PCC 1:2:4 type B-0 using 12.5 mm graded stone aggregate as in sub base flooring 25 mm thick surface finished even and smooth without using extra cement to receive the topping layer complete all as specified and directed.
M & L Vitrified Ceramic tiles 10 mm thick (square/ rectagular) dark/colour shade polished,area of each tiles not exceeding 0.36 sqm , in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match as in floors over and including 20mm thick screed bed in CM 1:6 complete all as specified and directed.
All as par item No. 07 above but on vertical surface of wall of size 600x600x10mm thick as in dado/skirting including 10 mm thick rendering in CM 1:4 complete all as specified and directed
M & L for glazed ceramic coloured tiles in vertical surface 300 x 200 mm x 7 mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to match surface of tiles including 10mm thick rendering in CM 1 :4 complete all as specified and directed.
M & L for non skid ceramic coloured tiles of design as approved by GE 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match including 20mm thick screed bed in CM 1 :6 complete all as specified and directed.
All as par item No. 10 above but vertical surfaces area of each tile exceeding 0.06 sq m but not exceeding 0.11 sqm as skirting non skid ceramic tiles complete all as specified and directed
M & L for Non Skid ceramic tiles 7 to 8 mm thick(square/ rectagular) area of each tile exceeding 0.11 sq m but not exceeding 0.18 sqm , in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match , including 20mm thick screed bed in CM 1 :6 complete all as specified and directed.
All as par item No. 12 above but on vertical surfaces area of each tile exceeding 0.11 sq m but not exceeding 0.18 sqm as skirting non skid ceramic tilescomplete all as specified and directed.
M & L for 18 to 20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like 15mm thick in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed.
Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations complete all as specified and directed.
S & F sinks made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 495 mm x 420 mm bowl size 410 mm x 330 mm x 160 mm complete all as specified and directed.
M & L for vitreous china wash basin, white,flat back, size 550 x 400 mm with brackets, including supply & fixing pillar cock 15 mm bore CP fancy type, PVC connection of 450 mm long, PVC (HDPE) 32 mm bore waste pipe, brass couplings 32 mm CP etc complete all as sapecified and directed.
S & F in repairs viterious china squatting pan orissa pattern size 580x440mm white integal foot rest & including 10 lit cap flushing cistern PVC low level & flush pipe including concrete bedding & including P trap 100mm complete all as specified and directed.
M & L for Vitreous China urinals, bowl type flat back size of 465 x 355 x 265 mm white (minimum) with grating and union for discharge pipe complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60 mm long brass screws, pointing around urinal back in cement etc complete all as sapecified and directed.
S & F in repairs, vitreous china wash down water closet pan (pedestal pattern), white, 'P' or 'S' type, inc. 10 litres, PVC flushing cistern, L L, white, with inlet,ball valve, float & brackets, inc. flush pipe, PVC tube 32mm dia. & inc. plastic water closet seat, black, closed pattern with flat bottem, & cover & M S CP or aluminium hinging device, complete all as specified and directed.
S & F PVC 10 litres capacity valveless ,syphonic action type low level flushing cistern ,white including flush pipe, cantilever brackets ,inlet, ball valve, float and handle, PVC connection 15mm dia etc complete all as specified and directed.
S & F health faucet with fluxi pipe and hand shover ,the length of hose 1.50mt fitted to the tap Make JAQUAR or equivalent of higher cost complete all as specified.
S & F in repairs EWC seat cover of any pattern including cover and Mild steel chromium plated hinging devices of any colour complete all as specified and directed.
Taking up or down GI steel tubing and connections including cleaning if refixing required for 15 mm bore of pipe complete all as specified and directed.
Taking up or down GI steel tubing and connections including cleaning if refixing required for 20 mm bore of pipe complete all as specified and directed.
Taking up or down GI steel tubing and connections including cleaning if refixing required for 25 mm bore of pipe complete all as specified and directed.
S & F GI tubes medium grade (ISI marked) with all fittings fixed to walls and ceilings or laid in floors of 15 mm bore of pipe complete all as specified and directed.
S & F GI tubes medium grade (ISI marked) with all fittings fixed to walls and ceilings or laid in floors of 20 mm bore of pipe complete all as specified and directed.
S & F GI tubes medium grade (ISI marked) with all fittings fixed to walls and ceilings or laid in floors of 25 mm bore of pipe complete all as specified and directed.
Refixing old steel tubing and connections in new or old position (wall, floor, ceiling etc) of 15 mm bore of pipe complete all as specified and directed.
Refixing old steel tubing and connections in new or old position (wall, floor, ceiling etc) of 20 mm bore of pipe complete all as specified and directed.
Refixing old steel tubing and connections in new or old position (wall, floor, ceiling etc) of 25 mm bore of pipe complete all as specified and directed.
Dismantling of water storage tanks of any description, capacity exc 500 and not exc 1000 litres and removing from site complete all as specified and directed.
Dismantling of water storage tanks of any description, capacity exc 1000 and not exc 2000 litres and removing from site complete all as specified and directed.
S & F rotational moulded polyethylene water storage tank (cylindrical vertical with closed top) 500 litre capacity hoisted and fixed in position complete all as specified and directed
S & F rotational moulded polyethylene water storage tank (cylindrical vertical with closed top)1000 litre capacity hoisted and fixed in position complete all as specified and directed
S & F rotational moulded polyethylene water storage tank (cylindrical vertical with closed top)2000 litre capacity hoisted and fixed in position complete all as specified and directed
S & F in repairs Ball brass valves, high pressure with polythene float and fly nut complete screwed for iron pipe or brass ferrule of 20 mm bore of pipe complete all as specified and directed.
S & F in repairs Ball brass valves, high pressure with polythene float and fly nut complete screwed for iron pipe or brass ferrule of 25 mm bore of pipe complete all as specified and directed.
S & F in repairs Gun metal globe or gate valves with iron wheel head screwed both ends for iron pipe of 20 mm bore of pipe complete all as specified and directed.
S & F in repairs Gun metal globe or gate valves with iron wheel head screwed both ends (ISI marked) for iron pipe of 25 mm bore of pipe complete all as specified and directed.
S & F in repairs for 15mm bore of pipe pillar taps cast copper alloy, with capstan head chromium plated fancy type screwed down high pressure with or without lettered 'Hot' or 'cold' with long screwed shanks and fly nuts, screwed for iron pipe complete all as specified and directed.
S & F in repairs stop valves cast copper alloy, screwed down, high pressure with crutch or butterfly handle chromium plated fancy type screwed both ends for iron pipe or for unions for 15 mm bore of pipe complete all as specified and directed.
Cleaning and removing all scale and dirt etc from tank and from mouths of circulating pipes etc of tank capacity exc 500 litres and not exc 1000 litres complete all as specified and directed.
Cleaning and removing all scale and dirt etc from tank and from mouths of circulating pipes etc of tank capacity exc 1000 litres and not exc 2000 litres complete all as specified and directed.
S & F in repairs bib taps cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule fancy type chromium plated of 15 mm bore of pipe complete all as specified and directed.
S & F in repair elbows 15 mm dia brass both ends screwed and fixed complete all as specified and directed.
S & F in repair elbows 20 mm dia brass both ends screwed and fixed complete all as specified and directed.
S & F in repair union15 mm dia brass to connect iron to polyethylene and fixed complete all as specified and directed.
S & F in repair union 20 mm dia brass to connect iron to polyethylene and fixed complete all as specified and directed.
S & F in repairs Grating done 125 mm dia with waste hole of PTMT Minimum weight 40 gms complete all as specified and directed.
M & L for PCC 1:3:6 type C2 using 40mm graded stone aggregate, 75mm thick in plinth protection laid in panels and finished even and smooth without using extra cement including necessary form work complete all as specified and directed.
M & L for 100mm thick PCC 1:2:4 Type B-2 using 40mm graded stone aggregate in pavement/hard-standing laid in alternative panels, surface finished even and smooth without using extra cement, including necessary form work, complete all as specified and directed.
S & F in repairs brass chromium plated shower rose 125 mm size with or without swivel joint complete all as specified and directed.
S & F CP 2 way bib cock complete all as specified and directed. Make Jaquar Cat No 38041 or equivalent of higher cost complete all as specified and directed.
S & F in repairs LId of water storage tank capacity of 1000/500Ltrs including necessary cleats/clamps complete all as specified and directed.
S & F in repairs PVC waste pipe for urinal/WHB/sink complete all as specified and directed
S & F SS toilet paper holder with flap complete all as specified and directed. Make JAQUAR code no.1553N or equivalent of higher cost complete all as specified.
S & F in repairs Waste fittings 32 mm dia, brass, chromium plated for sinks/basins etc with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed complete all as specified and directed.
Demolition and breaking up drain pipe (salt glazed ware, AC or reinforced concrete ) set in cement mortor for 100 mm internal dia of pipe complete all as specified and directed.
M & L for PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors of 75 mm bore of pipe etc complete all as specified and directed.
M & L for PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors of 110 mm bore of pipe etc complete all as specified and directed.
S & F PVC (SWR) bends any radius of 75 mm bore with out access door complete all as specified and directed.
S & F PVC (SWR) bends any radius of 110 mm bore with out access door complete all as specified and directed.
S&F PVC (SWR) junction single, (single T) equal or un equal of 110 mm bore of pipe complete all as specified and directed
S&F PVC (SWR) junction double, (double T) equal or unequal of 75 mm bore of pipe complete all as specified and directed
S & F PVC (SWR) vent cowl 110 mm bore complete all as specified and directed.
S & F PVC (SWR) vent cowl 75 mm bore complete all as specified and directed.
S & F PVC connection 15 mm size with PTMT nuts of length 600 mm complete all as specified and directed.
S & F Towel Ring of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 90 gms) complete all as specified and directed.
S & F towel rail 600 mm long of PTMT fixed with and including chromium plated brass screws and wooden / plastic cleats (minimum weight 190 gms) complete all as specified and directed..
S & F swivel shower of PTMT any colour for fixing with 15 mm box of pipe (minimum weight 40 gms) complete all as specified and directed.
S & F waste coupling of PTMT for 40 mm bore dia of pipe half or full threaded (minimum weight 60 gms) complete all as specified and directed.
S & F soap dish any type fixed to plugs with chromium plated brass screws complete all as specified and directed
S & F CP Wall mixture complete all as specified and directed. Make: Jaqar Code No 5821N or equivalent of heigher cost complete all as specified.
S & F glass shelf assembly consisting of 5.5mm thick sheet 12cm wide with chromium plated bracket guard railing 60cm long complete all as specified and directed
S & F cornner glass shelf of size 9"*9" shelf and frond,circle in design fixed over chromium plated brackets of heavy duty with frond linings with glass fixed in wall with necessary screws complete all as specified and directed. Make Jaquor ACR 1173 or equivalent of heigher cost complete all as specified.
S & F stack clamps made out of 50 mm x 5 mm flat iron and 16 mm dia round iron stays, including bolts and nut and securing ends of stays to wall or roof for 50 mm bore of pipe complete all as specified and directed.
Removing / taking out plants roots protrouding from wall / vertical surfaces / horizontal surfaces in including removal of roots cleaning and making good by applying bonding agent algibound fepx algi coal ec 100, filling with cement mortar 1:4 with using water proofing compound as dereved, complete all as specified and directed. (NOTE:- The quoted rate including water proofing compound)
Taking down carefully aluminium point wiring with PVC conduit surface or wooden battens (light, fan, socket, bell or power) including sunken cast iron/pressed steel terminal boxes (except fitting such as switches, ceiling roses, lamp holders Sockets, regulators, call bell, light fittings any sketch etc) and making good disturbed surface of walls, floor etc complete all as specified and directed.
M & L for Point wiring with PVC insulated 1.5 sq mm multi stranded copper conductor cable 1100 volts grade drawn into and including cocealed rigid non metallic PVC conduit medium grade not less than 20 mm (ISI marked ) with all conduit fitting and fixing accessories including sunk in cast iron /pressed steel terminal boxes (duly painted with two coats of anti –corrosive paint outside and two coats of aluminium paint inside) with 2.8 mm thick hylam brand laminated white bakelite sheet cover for mounting switches, sockets, fan regulators etc and 1.5 sq mm multi strand copper conductor cable as continuous earth wire complete for the One light point controlled by one switch.
All as per item No. 82 above but for One fan point controlled by one, one way switch complete all as specified and directed.
All as per item No. 82 above but for One exhaust fan point controlled by one, one way switch complete all as specified and directed.
All as per item No. 82 above but for One 5 Amp socket point controlled by one switch on independent board complete all as specified and directed.
All as per item No. 82 above but for One 5 Amp socket point controlled by one switch on same boardcomplete all as specified and directed.
All as per item No. 82 above but for One light point controlled by one, two way switch complete all as specified and directed.
All as per item No. 82 above but with cable PVC insulated 4.0 Sq mm (FR) in and including PVC Conduit incl continuous earthing with cable PVC insulated 2.5 Sq mm copper conductor for power socket 15Amps complete all as specified and directed. (Make : Anchor/ Standard/ Finolex/Havells/HPL)
S & F switch socket combination 2-in-1, 5 pin 5 Amp complete all as specified and directed. (Make : Anchor/ Standard/ C&S/Havells/HPL).
S & F switch socket outlet 5 pin 5 Amp complete all as specified and directed. (Make : Anchor/ Standard/ C&S/Havells/HPL).
S & F switch socket combination 2-in-1, 5 pin 5 and 15 Amp complete all as specified and directed. (Make : Anchor/ Standard/ C&S/Havells/HPL).
S & F switch piano (Flush type) 5 amps, 240 Volts, single pole one way complete all as specified and directed.
S & F switch piano (Flush type) 5 amps, 240 Volts, single pole two way complete all as specified and directed.
S&F ceiling rose, bakelite three terminal type complete all as specified and directed. (Make : Anchor / Standard/ Havells)
S & F bell ding dong electric single phase 240 Volt complete all as specified and directed. Make : .(Cable make Anchor/Havells / Finolex/RR Kabel)
S & F ceiling fan regulator electronic step type socket mounting type complete all as specified and directed. (Make : Anchor/ Standard/ C&S/Havells/HPL)
S & F LED light fitting 18/ 20 Watt T5 batten type,PVC extruded batten with decorative end caps complete with polycarbonate /glass tube 4Ft White , internally pre-wired and including connecting up with suitable twisted flexible copper conductor cable with suitable size complete all as specified and directed.
S & F of light fittings (2Ft) with wall mounted LED pattern with polycarbonate housing & integrated electronic driver of 9W cap T5(max lenght upto 600mm) complete all as specified and directed. Make :- (Make C&S /WIPRO/ CG / Phillips / Havells) (Note : Contractor shall submit warratny for 03 yrs)
S & F lamp holder PVC insulated body suitable for batten fitting straight/angle modular type with LED reterofit bulb 9 watts cap complete all as specified and as directed Make-Anchor/leader/SSK and bulbs C&S, Havells, Crompton
S & F in replacement of bldg security light fitting LED type of 20 watt New generation energy saving & environmental friendly long life Versatile pressure die-cast aluminium IP66 luminaire with high power LEDs as light source and electronic driver. mounting bracket suitable to house the light fittinhg , with its Galvanised Flat Iron clamps conntected nuts bolts etc complete all as specified & directed (Make C&S /WIPRO/ CG / Phillips / Havells) (Note : must for warrenty of 3 yrs to 5 yrs)
M & L for replacement of 2 Runs of cable PVC insulated but unsheathed 4.0 Sq mm, stranded copper conductor in and including PVC conduit with continuous earthing cable PVC insulated 2.5 Sq mm, stranded copper conductor all as specified and directed.(Cable make Anchor/ Havells /Finolex) Note :-2 runs of cable, one run of earth wire (copper cable) & one run of PVC conduit shall be measured as one running metre.
M & L of 2 Runs of cable PVC insulated but unsheathed 6.0 Sq mm, stranded copper conductor in and including PVC conduit with conceiled wiring continuous earthing cable PVC insulated 4.0 Sq mm, stranded copper conductor all as specified and directed.(Cable make Anchor/Havells/Finolex) Note :-2 runs of cable, one run of earth wire (copper cable) & one run of PVC conduit shall be measured as one running metre.
M & L of 2 Runs of cable PVC insulated but unsheathed 10 Sq mm, stranded copper conductor in and including PVC conduit with conceiled wiring continuous earthing cable PVC insulated 6.0 Sq mm, stranded copper conductor all as specified and directed.(Cable make Anchor/Havells/Finolex) Note :-2 runs of cable, one run of earth wire (copper cable) & one run of PVC conduit shall be measured as one running metre.
S & F in replacement sheet metal enclosure vertical DBs with provision for FP MCCB frame upto 100A in 16,KA, 25KA, as incomer 4 way double door made all as specified and directed Make Standard/ Indo asian/ Havells/Anchor
S & F in replacement sheet metal enclosure MCB, DB, SPN 8 way, complete all as specified and directed. (Make : Anchor/ Standard/ C&S/Havells/HPL)
S & F MCCB 100 Amps 4 Pole 25 KA 415Volts complete all as specified and directed. (Make : Anchor/ Standard/ C&S/Havells/HPL)
S & F MCCB 63 Amps 4 Pole 16 KA 415Volts complete all as specified and directed. (Make : Anchor/ Standard/ C&S/Havells/HPL)
S & F MCB TPN 40 Amps 16 KA 415Volts complete all as specified and directed. (Make : Anchor/ Standard/ C&S/Havells/HPL)
S & F MCB SPN 16 TO 32 Amp 10 KA 240 Volts complete all as specified and directed. (Make : Anchor/ Standard/ C&S/Havells/HPL)
S & F MCB, SP 6 to 30 Amp 10 KA 240 Volts complete all as specified and directed. (Make : Anchor/ Standard/ C&S/Havells/HPL)
S & F exhaust fans AC single phase 230/ 240 V of size 300 mm sweep with louver complete all as specified and directed.
S & F in minor repairs to FTL fittings with tube rod by replacing bi-pin holders, connections , tube rods of any type and capacity etc. complete all as specified and directed.
S & F PVC conduit pipe 20mm dia complete alongwith necessary fixing arrangement complete all as specified and directed.
S & F PVC casing capping 25mm complete alongwith necessary fixing arrangement completed all as specified & directed
S & F in replacement of 3 pin 15 Amps plug top acomplete all as specified and directed. Make Anchor/SSK/Indo Asian
S & F in replacement of Electronic Ballast suitable for 36/40 watts FTL conventional light fittings complete all as specified and directed. (Make Anchor, havells, Bajaj, CG, C&S)
S & F in replacement of Electronic Ballast suitable for 28 watts FTL conventional light fittings complete all as specified and directed. (Make Anchor, havells, Bajaj, CG, C&S)
S &F in replacement of single pole and neutral enclosure with a two pin and earth plug socket 240 V with one MCB SP ‘C’ series rating 20 to 30 Amp complete all as specified and directed. Make: L&T/standard/CG/ C&S / Havells
M & L for earthing with galvanized steel earth plate electrode 600 x 600 x 6mm thick, buried directly in ground(earth pit not less than 2.25 mtrs deep below ground level)with top edge of the plate not less than 1.5 mtr below normal ground level, connected to galvanized earth lead wire 4 mm dia by means of bolts, nuts, check nuts and washers protected with & including 15 mm dia light grade GI pipe necessary excavation and earth works, charcoal and common salt filling, watering arrangement with 20 mm GI pipe light grade including PCC pit with Pre cast RCC (1:2:4) cover, GI funnel with mesh test point, testing & commissioning completed all as specified and directed.
ABC CONSTRUCTION COMPANY
M/s Ats Electricals
R K Traders
M/S SIWALIK AND CO
DHABALESWAR ENGINEERING WORKS
c p engineering works
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .