Loading
Loading…
Loading…
| # | Company | Status |
|---|---|---|
| 1 | Accepted-Technical SHIMLA DIVISION NO I HIMACHAL PRADESH HP | SHIMLA | HIMACHAL PRADESH | 171001 | Accepted-Technical ok |
| 2 | Accepted-Technical | Accepted-Technical ok |
Tender Value
Refer Docs
EMD Value
₹10,000
Closing Date
17 Sept 2026, 10:00 amClosed
Executive Engineer kasumpti Division HPPWD Shimla3
Executive Engineer kasumpti Division HPPWD Shimla3
C/O Rain Shelter at Cheog Bus Stand). (Excluding GST
2026_PWD_142986_6
SD-I-CTR-Tender-2026- 16640 dt 07-09-2026
Open Tender
Civil Works
Percentage
30 days
Shimla
As Per SBD
12 documents required · 12 mandatory
₹350
₹10,000
18 Sept 2026
9 Sept 2026
17 Sept 2026
9 Sept 2026
17 Sept 2026
9 Sept 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Providing and laying granite stone in walls 20mm(twenty milimetre) (average) thickness base of cement mortar 1:3 (one cement: three sand) laid over and jointed with grey cement slurry mixed with pigment to match the shade of granite stone i/c rubbing and polishing complete including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. (i) 20mm(twenty milimetre) thick. (Excluding GST) | 25.43 | Per Square Metre | 4,406.78 | ₹1,12,064.42 |
| 2 | Providing edge moulding to 18mm thick Granite mirror polished stone counters, Vanities etc. including machine polishing to edge to give high gloss finish etc complete including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge (i) Granite stone. (Excluding GST) | 13.15 | Per Running Metre | 211.86 | ₹2,785.96 |
| 3 | Providing and fixing ACP sheet (4 mm thick) in aluminium door,wiondow, ventilator shutters and partition with CP brass / stainless steel screw etc complete including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. (Excluding GST) | 28.03 | Per Square Metre | 1,271.19 | ₹35,631.46 |
| 4 | Providing and fixing 0.60mm(zero point six zero milimetre) thick prepainted steel sheet in roofing with hot dipped metallic zinc coated sheet with top coat of regular modified polyster (RNP) organic coating of 20 microns over 5 microns primer coating to back coat of polyster of 5 microns over 5 microns primer coating i/c fixing with prepainted iron J or L hooks, bolts and nuts 6mm dia metre with prepainted limpet and bitumen washers complete with all accesoriees as required as per the direction of Engineer-in-charge. (Excluding GST) | 40.64 | Per Square Metre | 1,398.31 | ₹56,827.32 |
| 5 | Providing ridges or hips of width 60 cm(sixty centimetre)overall width plain G.S. sheet fixed with polymer coated J or L hooks, bolts and nuts 8 mm(eight milimetre) dia G.I. limpet and bitumen washers complete including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. (i) 0.63 mm thick with zinc coating not less than 350 gm/m2 (Excluding GST) | 15.9 | Per Running Meter | 593.22 | ₹9,432.2 |
| 6 | Providing and fixing M.S. Black/ BP Sheet 2mm thick in eaves board. Facia/ soffits/ ceiling including cutting, fixing and welding to steel roof members and applying a coat of red lead primer complete as per the instruction of Engineer-in-Charge (Base members of steel work shall be measured & paid separately) (Excluding GST) | 6.33 | Per Square Metre | 1,525.42 | ₹9,655.91 |
| 7 | Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor etc., up to floor five level, excluding the cost of centering, shuttering and finishing . The rates including octroi , royality , Malkana , toll tax , or other imposed by Government but Excluding GST , including hauling of material, including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. (i) 1:3:6 (One cement : Three coarse sand) : Six graded stone aggregate 20 mm nominal size) (Excluding GST) | 12.77 | Each | 4,915.25 | ₹62,767.74 |
| 8 | Steel work welded in built up tubilar (round, square or rectangular hollow tubes etc) including cutting hoisting fixing in position and applying a priming coat of red lead paint including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. (Excluding GST) | 1,700.05 | Per Kilogram | 97.46 | ₹1,65,686.87 |
| 9 | Painting two coats(excluding coat) on new wood and wood based surface with enamel paint to give an even shade including cleaning the surface of dirt,dust and other foreign matter,sand papering & stoping including carriage of materials in all leads as per directions of the Engineer-in-Charge. (i) With white enemal paint. (Excluding GST) | 25.7 | Per Square Meter | 67.8 | ₹1,742.46 |
stage.html
html • 0.02 MB
tech_bid_open.pdf
tech_eval.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 1.09 MB
SBD456589.pdf
Tender Documents • 7.09 MB
BOQ_212391.xls
BOQ • 0.31 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .