Construction and Beautification For Open Land And Providing And Fixing Open Physical Equipment Rids Govindpuri File No. 72/19x3/3 Ward 29

Amount

Earth work in excavation by mechanical/manual means in foundation trenches or drains i/c dressing of sides and ramming of bottoms etc.

RR Masonry with hard stone in foundation and plinth i/c leveling up to with cement concrete m-5 stone aggregate 20mm nominal size) at plinth level with :cement mortar.

Providing and laying in position specified grade reinforced cement concrete excluding the cost centering, shuttering, finishing and reinforcement – All work up to plinth level with grade M-20 (Nominal Mix) with 20 mm maximum size of stone aggregate.

15 mm Cement plaster on the rough side of single or half brick wall of mix (1 cement :4 fine sand )

Brick work with well burnt chimney bricks in bulls patent trench kiln manufactured by ghol process ,crushing strength not less than 40 kg/sqm and water absorption not more than 15 % in foundation and plinth .cement mortar 1:6 (1 cement :6 coarse sand )

60 mm thick factory made cement concrete interlocking tiles block of M-30 grade reflective type rubber modulated gray colour paving block made by block making machine etc.

Painting with synthetic enamel paint of approved brand and manuifacture of required colour to give an even shade

Finishing wall with textured exterior paint of required shade new work ( two or more coats applied @ 3.28 ltr/10 sqm over and including base coat of water proofing cement paint applied @2.20 kg /10 sqm

P/A 1.5 mm thick (in two coats ) white cement based wall putty of best quality.

Distempering with all bound washable distemper of approved brand and manufacture to give an even shade new work (2 or more coats ) over and including priming coat with cement primer

Providing and laying in position specified grade reinforced cement concrete excluding the cost centering, shuttering, finishing and reinforcement – All work up to plinth level with grade M-7.5 (Nominal Mix) with 40 mm maximum size of stone aggregate.

Centering and shuttering ,propping etc. and removal of form work for: 1. foundation, footings, bases of columns etc. for mass concrete.

Centering and shuttering ,propping etc. and removal of form work for: 2.columns,pilers,piers,abutments,posts and struts

Centering and shuttering ,propping etc. and removal of form work for: 3.Suspended floors,roofs, landings,balconies and access platform

Centering and shuttering ,propping etc. and removal of form work for: 4.lintels,beams,plinth beams ,girders ,bressumers and cantilevers.

Suppying and filling in plinth under floors watering, ramming, consolidating and testing complete. Moorum

Structural steel work riveted bolted on welded in built up section, trusses and framed work including cutting , hoisting fixing in position and applying a priming coat of ap[proved steel primer all complete.

Demolishing stone rubble masonry manually/by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 m lead as per direction of engineer in charge.

Providing and laying in damp proof course 50 mm thick with cement concrete grade M-15 (nominal mix) with 20 mm maximum size of stone aggregate.

Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete.

Providing and laying in position specified grade reinforced cement concrete excluding the cost centering, shuttering, finishing and reinforcement – All work up to plinth level with grade M-20 (Nominal Mix) with 20 mm maximum size of stone aggregate.

Providing and fixing stainless steel (16 gauge / 1.62 mm grade 304 ) railing made of hollow tubes, channels, plates etc, including scolding, grinding, buffing, polishing and making curvature whenever required ) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories and stinless steel .As per recongnised rate.

Supplying and stacking of good earth at site including royalty and carriage up to 1 km (earth measured in stacks will be reduced by 20 % for payment )

Earth work in surface excavation not exceeding 30cm in depth but exceeding 1.5m in width including disposal of excavated earth up to 50m and lift up to 1.5m disposed soil to be leveled and neatly dressed all kinds of soil.

Reinforced cement concrete work in (any thickness)includingattached pilasters,buttresses,plinth and string courses ,fillets,columns,pillers,piers,abutments Posts and struts etc.up to floor two level excluding cost of centering, shuttering, finshing and reinforcent. Cement concrete grade M-20 (nominal Mix) with 20 mm maximum size of stone aggregate .

Two or more coats applied @ 1.25 Ltr/10sqm including one coat of special primer applied @ 0.75 Ltr/10 sqm.

Lead of Earth Work up to 3 Km

P/L mechanically mixed cement concrete 20mm maximum size graded crushed stone i/c cost of centering & shuttering.(a) In plinth & foundation i M-15

Painting with synthetic enamel paint of approved brand and manuifacture of required colour to give an even shade.

Providing and laying polished vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption’s less than 0.08 % and conforming to IS : 15622 Of Approved make in all colors and shades size of Tile 80x80cmx10mm.

Demolishing brick work manually/by mechanical means including staking serviceable material and disposal of unserviceable material within 50 m lead as per direction of engineer -in-charge in cement mortar.

CR masonry (second sort) with hard stone in foundation & plinth with cement mortar 1:6 (1 cement 1; 6 coarse sand).

White vitreous china Orissa pattern W.C. pan of Size 580x480mm integral type foot rests.

Single Squatting plate with 5 litre P.V.C automatic flusing cistern

White vitreous china wash basin size 630x450mm with pair of 15mm c.p brass pillar tap.

P/P on at all floor levels high HDPE (polyethylene) water storage tank.

Provide and fixing PTMT bib cock of approved quality and color.

P/F with one step CPVC solvent cement and cutting chases and making good the same including jointing of joints complete as per direction of engineer –in –charge.

Painting wood work with deluxe multi surface paint of required shade, two or more coat applied @0.90 ltr/10sqm over an under coat of primer [email protected] ltr/10 sqm of approved brand or manufacture.

Providing laminated veneer lumber conforming to IS:14616 and TAD -15: 2001 (part B ) in factory made frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position as per direction.

Providing and fixing double glazed hermetically sealed glazing in aluminum windows, ventilators and partition etc. with 6 mm thick clear float glass both side having 12mm air gap including providing EPDM gasket, perforated aluminium spacers, desiccants, sealant ( both primary and secondary sealant) etc.

Providing wood works in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position other than teak wood.

Providing and fixing in position collapsible steel shutters with vertical channels 20x10x2mm and braced with flat iron diagonals 20x5mm size with top and button rail T-iron 40x40x6mm with frame 40mm dia, steel pulleys complete with bolts, nuts, locking arranement.

P/F Ist quality ceramic glazed wall tiles conforming to IS :15622 (6 to 7mm thick)of approved make in all colurs

Stone work sunk or moulded or sunk and moulded upto floor two level in cement mortar 1:6 (1 cement :6 coarse sand ) including pointing with white cement mortar 1:2 (1 white cement :2 stone dust )with an admixture of pigment matching the stone shade (RED SAND STONE)

Providing corrugated profile sheet roofing i/c vertical / curved surface fixed with polymer coated J or L hooks, bolts & nuts 8mm dia e.t.c complete.

P/F 1 mm thick m.s. sheet door with frame of 40 x40 x6 mm angle iron and 3 mm m.s. gusset at the junction and the corners, all necessary fittings, I/C applying a priming coat of approved steel primer.

Structural steel work riveted bolted on welded in built up section, trusses and framed work including cutting , hoisting fixing in position and applying a priming coat of ap[proved steel primer all complete angle iron post & strut of required size including bottom to be split and bent at right angles.

Providing and fixing 18mm thick gang saw cut mirror polished (premoulded and prepolished ) machine cut for kitchen platforms vanity coumters , window sills, facis and similar location granite of any colour and shade.

Providing and fixing stone jaali 40mm thick throughout in cement mortar 1:3 ( 1 cement : 3 coarse sand ) including pointing in white cement mortar 1:2 ( 1 white cement :2 stone dust) red sand stone.

Point wiring including metallic switch box, sheet, switch, socket, lamp holders/ceiling roses etc. Point wiring including metallic switch box, sheet, switch, socket, lamp holders/ceiling roses etc. (A) Light point/Fan points. a) Medium point

Point wiring including metallic switch box, sheet, switch, socket, lamp holders/ceiling roses etc. Point wiring including metallic switch box, sheet, switch, socket, lamp holders/ceiling roses etc. (A) Light point/Fan points. b) Long point

Point wiring including metallic switch box, sheet, switch, socket, lamp holders/ceiling roses etc. 3 Pin 6 Amp socket outlet on separate board a) Medium point

Point wiring including metallic switch box, sheet, switch, socket, lamp holders/ceiling roses etc. 3 Pin 6 Amp socket outlet on separate board b)Long point

Point wiring including metallic switch box, sheet, switch, socket, lamp holders/ceiling roses etc. (C) Point wiring including metallic switch box ,sheet for 3 pin 16 Amp. Socket, Outlet, point with 4 sq.mm a) Medium point

Point wiring including metallic switch box, sheet, switch, socket, lamp holders/ceiling roses etc. (C) Point wiring including metallic switch box ,sheet for 3 pin 16 Amp. Socket, Outlet, point with 4 sq.mm b) Long point

Miniature circuit breaker (M.C.B ) DB METAL vertical TPN with provision for FPB/isolator/RCCB/RCBO as incomer and SP/TP INCLUSIVE OF BUSBAR,NEUTRAL BAR as EARTH as per IS 13032

Providing and fixing ISI marked flush door shutters conforming to IS 2202 part 1 non decorative type core of block board construction with frame of 1st class hard wood and well matched teak ply veneering with vertical grains or cross bands and face veneers on both places of shutters using 35 mm th ss butt hinges

Providing and fixing new fountain with making fixing of G.I. pipe brass nipal light fitting with motor and tank and wire ,cabling all fitting i/c labour charge complete.

LED beam light with fitting as per market rate

Providing and fixing RCV colour LED standard make as per market rate with fitting labour charge included.

Providing and laying ornamental plant as per market rate a) Hedge dooranta/enermy

Providing and laying ornamental plant as per market rate b) Ornamental plant like bottle paam / fispam/ morpankhi etc.

Providing and laying ornamental plant as per market rate c) Gudhal/chandni/alestonia/voganbaliya

Horticulture &artistical material,sculpture with carving on whole object,ornamental items incuding placing on position and fixing as per direction of engineer – in- charge.

Providing and fixing point LED light focused plantation night heritage with colour ful lights fully water proofed with all accessories ,wiring and insulation complete including labour charge as per direction of engineer-in-charge.

P/F Of ISI marked precast reinforced cement concrete manhole cover i/c frame and transporting at site, cost of all material e.t.c.

P/F Of ISI marked precast reinforced cement concrete manhole cover i/c frame and transporting at site, cost of all material e.t.c.

Plaster 12mm thick cement plaster in single coat including finishing.

Providing and laying and jointing salt glazed stone ware (S.W.) pipes socket and spigot ISI marked as per IS 651-2007 SP1class with stiff cement mortar1:1including testing of joints etc. complete. 200MM

Multi Play Station age Group 6 to 12 years. Safety play area-25x50 Fr Spiral Slide, 2 Standard Slide, Turnal Bridge FRP Parfait = 3x3, FRP 3 Canopy, Pipe = 75 MM, 32 MM, 25 MM, 19 MM, 14-12 Guage Apolo Pipe ISI Mark, Paint= To Coat Colour aspa Paint.

Multi Play Sation -Age Group 6 to 12 Years. Safety Play area -30x70 FT, Spiral Slide, 3 Wave Slide, Tube Slide, FRP Parfait=4 FRP 4 Canopy, Turnal Bridge Pipe = 75 MM, 32 MM, 25 MM, 19MM , 14-12 Guage Apolo Pipe ISI Mark. Paint= To Coat Colour aspa Paint.

ABS Shaper Single Material= Apolo Pipe ISI Mark, Length= 610 MM, Width = 1219 MM, Height = 610 MM, Safe Area = 1110x1819 MM, Maximum User Weight = 100 KG, Ground Mounting Round Plate = 200x10 MM, Center Pipe = Dia 90 Mm, Other Pipe used = Dia 42 MM, 32 MM with thickness 3 MM, Handle Grip = Rubber Mounting Piate Cover = LLDPE, Pipe End Cap = LLDPE Product Size = All Dimensions Can

Shoulder Press/Exerciser (Single) - Material = Apolo Pipe ISI Mark Length = 1318.5 MM, Width = 630 MM, Height = 1896.5 MM, Safe Area = 1818x1630 MM Maximum User Weight = 100 KG, Ground Mounting Round Plate = 200x10 MM, Center Pipe = Dia. 115 MM other Pipe Used = Dia 42 MM, 32 MM With Thickness 3 MM Seat And Back = FRP/LLDPE, Handle Grip = Rubber, Mounting Plate Cover = LLDPE, Pipe End Cap = LLDPE, Bush Size = Dia 72 MM Length 50 MM Bearing Brand = SKF, NBC. Bearing Size = No. 6206, Product.

Pull up Station - Material = Apolo Pipe ISI Mark Length = 635 MM, Width = 1260 MM, Height = 2060 MM, Safe Area = 1250x1116 MM, Maximum User Weight = 100 KG, Ground Mounting Round Plate = 200x10 MM, Main Pipe = Dia 60 MM, other Pipe Used = Dia 48 MM, 25 MM with Thickness 3 MM, Handle Grip = Rubber Mounting Plate Cover = LLDPE Product Size = All Simensions Can Be Very By

ORBIT Climber - Age Group 6 to 12 Years, Safety Play Area - 6x10 ft, H = 10 FT, Pipe = 60 MM, 14 Guage Apolo Pipe ISI Mark Paint = To Coat Colour Full Aspa Paint

Labour Charge fo Rides