REPAIRS/MAINT OF INTERNAL ELECTRIFICATION INCLUDING FANS AND GEYSERS AT CADETS LIVING ACCN AND ADMINISTRATIVE BUILDING FOR POP NOV 2023 AND EOT ST 2023 AT NDA KHADAKWASLA

Amount

Taking down existing unserviceable point wiring of any description/type/ size of light/ fan/tube/ power/two way/bell etc on TW batten/conduit/casing caping including removal of batten / conduit / gutties / wooden boards / switches / sockets / regulators/ light fittings etc and removal of unserviceable material out of site and making good the disturbed surfaces of wall/ceiling so as to match with the existing finishes all as specified

M&L point wiring with 1.5 sq mm copper conductor FRLS (multistrand) PVC insulated ISI marked unsheathed cable and including surface, Non metalic rigid PVC casing capping double lock type ISI marked not less than 19 mm with all fitting & other accessories and also including PVC insulated ISI marked unseathed FRLS cable size 1.5 sq mm copper conductor as earth wire to common earth dolly including PVC box, modular cover plate with frame suitable for modular type switches, sockets, fan regulator incl making good the disturbed surfaces and matching with existing surface complete all as specified and directed. One light/Fan point controlled by one way switch 6 Amps 240 volts Note: Quoted rate shall be deemed incl of moudule box and cover plate with frame

Ditto all as per item No. 2 above but One 3 pin 6 Amps socket out let point on independent board. Note: Quoted rate shall be deemed incl of moudule box and cover plate with frame

Ditto all as per item No. 2 above but One 3 pin 6 Amps socket out let point on same board. Note: Quoted rate shall be deemed incl of moudule box and cover plate with frame

M&L point wiring with 2.5 sq mm copper conductor FRLS (multistrand) PVC insulated ISI marked unsheathed cable and including surface, Non metalic rigid PVC casing capping double lock type ISI marked not less than 19 mm with all fitting & other accessories and also including PVC insulated ISI marked unseathed FRLS cable size 2.5 sq mm copper conductor as earth wire to common earth dolly including PVC box , modular cover plate with frame suitable for 15 Amps socket and switch outlet power point independent circuit incl making good the disturbed surfaces and matching with existing surface complete all as specified and directed Note: Quoted rate shall be deemed incl of 15 amp modular switch, socket,3 module cover plate with frame.

M&L for concealed point wiring drawn through existing conduit of any type with 1.5 sq mm copper conductor FRLS (multistrand) PVC insulated ISI marked unsheathed 650/1100 V grade conforming to IS 694-1990 adhering to colour code including PVC insulated ISI marked unseathed FRLS cable size 1.5 sqmm copper conductor as earth wire multistranded green colour with terminal/sunken boxes as required at site incl making good the disturbed surfaces and matching with existing surface complete all as specified and directed Note: Quoted rate shall be deemed incl of moudule box and cover plate with frame

M&L for secruing loose wiring and repair to point wiring with necessary rigid non metalic PVC casing caping double lock type/ PVC conduit ISI marked of size not less than 19mm inclusive all accessoriescomplete all as specified and directed Note: Quoted rate shall be deemed incl of conduit/casing capping

S&F in replacement modular step type fan regulator 120W, 2 module to match exising module complete all as specified and directed.

S&F in replacement modular switch piano type 6 amps one way one module to match exising module complete all as specified and directed.

S&F in replacement modular switch piano type 16 amps one way one module to match exising module complete all as specified and directed.

S&F in replacement modular Socket, 6A - 2/3 pin 2 module to match exising module complete all as specified and directed.

S&F in replacement modular Socket, 6/16A - 2/3 pin 2 module to match exising module complete all as specified and directed.

S & F in replacement of switch piano flush type 5 Amps SP one way complete all as specified and directed.

S&F in replacement of switch socket combination with box 5/6 Amps flush mounted 5 pin multi purpose complete all as specified and directed.

S&F in replacement of switch socket combination with box 5/15 Amps flush mounted 3/5 pin multi purpose complete all as specified and directed.

S&F in replacement for ceiling rose, 2 to 3 terminals /PVC/Polycarbonate, isolated body complete all as specified and directed.

M & L in replacement of fan regulator electronic step type suitable for 1200/1400 mm sweep fan complete all as specified and directed.

M&L for sub main wiring with two single core PVC insulated FRLS cables with stranded copper conductors 2.5 Sqmm , 1100 Volts grade and including casing caping medium grade not less than 19 mm complete with conduit accessories and copper cable 2.5 sqmm continuous earth wire and making good disturbed surface and touch up with the same finishes complete all as specified and directed. Note : Two runs of 2.5 sq mm cable and one run of 2.5 sq mm earth wire and PVC casing/capping shall be measured and paid as one unit length

M&L for sub main wiring with two single core PVC insulated FRLS cables with stranded copper conductors 4 Sqmm , 1100 Volts grade and including casing caping medium grade not less than 19mm complete with conduit accessories and copper cable 4 sqmm continuous earth wire and making good disturbed surface and touch up with the same finishes complete all as specified and directed. Note : Two runs of 4 sqmm cable and one run of 4 sqmm earth wire and PVC casing/capping shall be measured and paid as one unit

Taking down carefully sub main wiring of any type and size and making good disturbed surfaces to match the existing surface complete all as specified and directed.

S&F in replacement PVC insulated cable 2 core stranded copper conductor 01 sqmm complete all as specified and directed..

S&F in replacement factory made epoxy powder coated Distribution Board TP & N 4 way double door (VTPN MCCB DB ) MCCB as In comer, with metal door (IP-43 protection) fabricated from CRCA sheet and fixed semi flush to wall and suitable for universal mounting and including 200 Amp copper bus bar, neutral bar, standard DIN rail, Earth bar and cable ties for cable management, top and bottom removable gland plates with Knockout semi flush to wall and making good disturbed surface and touch up with the same finishes to match the existing surface complete all as specified and directed. Note:MCBs/ MCCBs will be measured and paid seperately under respective Sch A item in the schedule

S&F in replacement MCB DB 08 way SPN double door sheet metal enclosure factory made suitable for MCB DB's 240 volts with 200 amp rated busbar, neutral & earthing link bar,surface mounting complete including taking down the existing DB of any type & size alongwith its accessories by removing from existing circuits and refixing the new DBs and circuits complete as required at site and making good disturbed surface and touch up with the same finishes to match the existing surface complete all as specified and directed Note - MCBs will be measured & paid separately under respective item of sch A, if required to be replaced.

S&F in replacement MCB DB 04 way SPN Double door sheet metal enclosure factory made suitable for MCB DB's 240 volts,surface mounting complete including taking down the existing DB of any type & size alongwith its accessories by removing from existing circuits and refixing the new DBs and circuits complete as reqd at site making good disturbed surface and touch up with the same finishesas to match the existing surface complete all as specified and directed Note - MCBs will be measured & paid separately under respective item of sch A, if required to be replaced.

S&F MCCB with rating of 125 Amps,415Volts 3pole with 16kA breaking capacity,thermal magnetic asdjustable of overload & short circuit release as per IS-13947 & IEC 60947-2 & the service short circuit breaking capacity (Ics) should be equal to ultimate breaking capcity(Icu).MCCB should be with suitable spreaders and phase barriers for each terminals complete all as specified and directed.

Supply and fix in replacement of C Curve MCB SP 6-32 Amps working on 240 volts,50 Hz 10 KA complete all as specified and directed.

Supply and fix in replacement of C Curve MCB DP 6-32 Amps working on 240 volts,50 Hz 10 KA complete all as specified and directed.

Supply and fix in replacement of C Curve MCB SPN 40-63 Amps working on 240 volts, 50 HZ,10 KA complete all as specified and directed.

Taking down ceiling fan/exhaust fan of any sweep for servicing / repairing / maintenance, opening up, identifying and replacing the defective parts,such as bearing, capacitor etc and cleaning, greasing,etc, reassembling and hanging up/fixing back at its original position, connecting up and testing complete all as specified and directed. Note : 1.Cost of spares such as capacitors, bearings etc will be measured and paid separately under respective Item of sch A as supply only.

Supply only capacitor of 2.5 mfd for ceiling fan/exhaust fan complete all as specified and directed. Make:Tibcon/Epcos

Supply only capacitor of 4 mfd for air circulator/exhaust fan complete all as specified and directed. Make:Tibcon/Epcos

Supply only bearing No.6201/6202/6203 or any other No matching to the existing size and suitable for ceiling fan/exhaust fan/wall mounted fan complete all as specified and directed. Make:SKF

S&F in replacment aluminum fan blades sutable for heavy duty exhaust fan of any sweep as per the sample given complete all specified and directed.

Disconnecting electric connection and taking down carefully fan of any type and size/sweep as described below, removing the burnt winding of fan motor rewinding with super enarneled copper winding wire of suitable gauge or of matching size to the exisiting wires including all insulating material such as insulation paper sleeve, tape, varnishing etc and reassembling, testing, transporting back to site and reflxing to original position complete all as specified and directed for the following :- (a) Celling fan of size 1200 sweep.

All as per Item No 34 above Air circulator fans size 600 mm sweep wall mounting Oscillating type

All as per Item No 34 above Wall mounted/Pedstal fans size 350/450 mm sweep Oscillating.

All as per Item No 34 above Exhaust fan of 350/450 mm sweep.

All as per Item No 34 above Exhaust fan of size 600 sweep 3 Phase

M&L for painting the ceiling fan of any sweep with two coats of synthentic enamel paint by rubbing/removing the old paint carefully without any damage to the fan or fan blades complete all as specified and directed.

All as per item No. 39 above but exhaust fan of any sweep

All as per sl item No 39 above but Air circulator/Pedestal of size 450/600 mm sweep with superior quality enamel paint (Grey) complete all as directed.

Dismantling and removing rusted louvers (set of 4) suitable for 300 mm sweep exhaust fan supply and fix MS louvers duly painted gray coloured suitable for 300mm heavy duty exhaust fan alongwith four number mounting bracket with bolts, nuts washers etc complete all as specified and directed.

Supply and fix in replacement metallic flexible hot water connection 1200 mm long including necessary washers suitable for geysers of 25 ltr capacity complete all as specified and directed.

M&L in replacement of ply wood sheet of 19mm thickness for mounting exhuast fans cutting to the size as required at the site including fixing the same with necessary nuts and bolt and fastner arrangement complete all as specified and directed.

S & F in repairs 3 mm thick aluminium composite pannel (ACP) board of any size fixed on both sides as per site requirement . ACP board fixed on steel frame/grid with SS screw/rivet etc as directed. The board shall be sheated with high intensity retro reflective sheet of blue colour or as approved complete all as specified and directed.

S&F in replacement 1x10 watt,230V surface and wall mounted LED batten suitable for mirror light with polycarbonate housing and integrated electronic electronic driver including connecting up with twin core twisted flexible copper conductor cable from ceiling rose complete all as specified and directed.

S&F in replacement of 18/20watt,230V surface and wall mounted LED batten, extruded aluminium housing with polycarbonate diffuser and integrated electronic driver including connecting up with twin core twisted flexible copper condctor cable from ceiling rose complete all as specified and directed.

S&F in replacement of 18watt,230V surface and wall mounted motion sensor LED batten, extruded aluminium housing with polycarbonate diffuser and integrated electronic driver including connecting up with twin core twisted flexible copper conductor cable from ceiling rose complete all as specified and directed.

S&F in replacement 1x20 watt,230V surface and wall mounted emergency LED batten having backup upto 4 hours with polycarbonate housing and integrated electronic electronic driver including connecting up with twin core twisted flexible copper conductor cable from ceiling rose complete all as specified and directed.

M&L in replacement recess mounted 2' x 2' LED Panel lights 40 W LED 5700K, 240Volts and glare free symmetrical illumination suitable for Armstrong/Grid ceiling, Environmental friendly, new generation, energy saving, high power LED as a light source with clear diffuser and separate replaceable electronic driver including connecting with twin core wire and also matching to the adjacent ceiling surfaces carefully complete all as specified and directed.

S&F in replacement 36/40 W suspended LED Light with high efficiency providing soft-light and glare free symmetrical illumination including suspension kit including connecting up with twin core twisted flexible copper cable from ceiling rose to fitting complete all as specified and directed.

S&F in replacement of honor board LED (warm white) fitting of 1x12 Watt individual LED lenses, chorme coloured complete all as specified and directed.

S&F in replacement LED bulb 1 watt of any color sample given by the Engr-in-charge with B-22 base complete all as specified and directed.

S&F in replacement of LED high glow bulb 9 watt, Warm White in colour of base B22 complete all as specified and directed.

S&F in replacement of LED high glow bulb 15 watt, Warm White in colour of base B22 complete all as specified and directed..

S&F in replacement of ceiling fan complete with blades, down rods and other accessories, 230 V, 1200 mm sweep with Minimum air delivery of 210 CMM BEE Five star rated with brushless direct current motor (BLDC), white/Ivory in colour complete all as specified and directed.

S&F in replacement of high speed wall mounted fan of sweep 400 mm,Full copper motor, auto thermal overload protection,compact style and powder coated guards & pull cord switch for speed regulation and oscillation control including connectng up the power cord to the socket and necessary fixing accessories complete all as specified and directed.

S&F in replacement of high speed wall mounted fan of sweep 600 mm, Full copper motor, double ball bearing, compact style and powder coated guards with min air delivery of 250 CMM complete all as specified and directed. Make: Havells catpart no TURBOFORCE WALL or equivalent make as given in makes list of CA

S&F in replacement of Plastic ventilation fan of 200/250 mm sweep inclduing replacing the plywood as per the site requirement complete all as specified and directed. Note: Old Exhuast fan should be deposited in MES store yard

S&F in replacement of Metal body ventilation fan of 225 mm sweep inclduing replacing the plywood as per the site requirement complete all as specified and directed. Note: Old Exhuast fan should be deposited in MES store yard

S&F in replacement for white cover plate with frame 3 moduleb as per existing complete all as specified and directed.

S&F in replacement for white cover plate with frame 8 module as existing complete all as specified and directed.

S& F in replacement PVC unbreakable surface boxes suitable for modular switches 8 module complete all as specified and directed.

S& F in replacement PVC unbreakable surface boxes suitable for modular switches 3 module complete all as specified and directed.

S&F in replacement for white cover plate with frame 12 module as per existing complete all as specified and directed.

S&F in replacement of 1 module Blanking plates as per existing complete all as specified and directed.

S&F in replacement glass dome of chandelier at Cadet mess as per existing type and size complete all as specified and directed.

S&F in replacement table lamp fittings white colored suitable for B-22 base cap CFL/bulb with necessary accessories including surface PVC box of circular/square type as per existing complete all as specified and directed.

S&F in repalcement recess type LED COB lights 12 W with ceiling cut out of Ø 92 mm Environmental friendly, energy saving, recess mounted downlighter with separate replaceable electronic driver including connecting with twin core wire, including cutting the existing false ceiling dia to the required size and also matching to the adjacent false ceiling surfaces carefully complete all as specified and directed.

M&L in repalcement recess mounting ceiling lights with recess type LED ceiling lights 18/20 W LED 5700K, 240Volts with 35º spread optics with ceiling cut out of Ø 118 mm Environmental friendly, new generation, energy saving, recess mounted downlighter with high power COB LED as light source & clear glass and separate replaceable electronic driver. including connecting with twin core wire including cutting the false ceiling dia to the required size and also matching to the adjacent false ceiling surfaces carefully complete all as specified and directed.

S&F in repairs Electronic driver for 30 watts COB lights Make should be as per the Existing manufacturer complete all as specified and directed.

S&F in repairs Electronic driver for 20 watts COB lights Make should be as per the Existing manufacturer complete all as specified and directed.

S&F in replacement of decorative indoor hanging lights black finish suitable for 40 watt E-27 base LED bulb/lamp including 40 watt bulb with necessary accessories hanging chain including surface PVC box of circular/square type complete all as specified and directed.

SONU ENTERPRISES

BRICKS ON CLOUD INFRA