SPL REP TO BLDG NO CC 86 SINGLE OFFICERS ACCN (08 QTRS) AT AWC UNDER GE AWC MHOW.

Amount

Demolition of stone slabs laid bedded and pointed in cement mortar , of any description or thickness in floors, aprons , cover slabs of drain etc. all as specified.

M & L 20 mm thick machine cut one side polished black granite in kitchen plate form, windows ceils , stair case etc set and jointed with grey cement slurry mixed with pigment to match with shade of slab including rubbing and polishing and 20 mm thick screed bed in cement mortar 1:6 complete all as specified and directed.

M & L 20 to 25 mm thick machine cut Kota stone slab in flooring or treads of steps over and including 20mm thick screed bed in cement mortar 1:6, laid and jointed with grey cement slurry mixed with pigment to match with shade of slab including rubbing complete all as specified and as directed.

Description same as per item No 03.00 above but as in skirting or vertical surfaces including 10 mm thick rendering in cement mortar 1:4, complete all as specified and as directed.

M&L Rounding to edges of stone slabs one edges, such as in steps, cooking platform, and other similar situations for bullnosing / moulding to exposed edges( any type) and polishing to match the adjoining surfaces complete all as specified.

Dismantling floor, hearth or wall tiling including cement mortar bedding ( but not backing ), removing serviceable tiles to store and rubbish off the premises complete all as specified.

M & L for vitrified cerameic tiles 10mm thick light shade (square/rectangular ) polished, area of each tiles not exceeding 0.36 sqm in floor set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 20 mm thick screed in cement mortar 1:6 complete all as specified and directed.

Description same as per item No 07.00 above but laid in vetical surface such as skirting/dado over 10 mm thick rendering in CM 1:4 complete all as specified and directed.

Material and labour Non-skid joint free coloured Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tiles exceeding 0.11 sqm but not exceeding 0.18 sqm,(400X400mm) in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over & including 15 mm thick screed bed of CM (1:6)

M&L glazed ceramic coloured tiles, 350 x 250 x 7 mm / 450 x 350 x 7 mm thick on vertical surfaces such as dados , skirting and risers to steps etc. set and jointed in neat cement slurry and pointed in coloured cement to match over and including 10mm thick backing coat to receiving to wall tiles in Cement mortar 1:4 complete all as specified and directed.

Taking down shutters of any description exc 1 sq.m and n exc 2 sq.m each complete all as specified.

Taking down Chowkhats or frames not exc. 1.5 sq.m each with shutters ( without taking off shutters from the frames) and removed from site complete all as specified.

Taking down chowkhats or frames exc. 1.5 sq.m and n exc 4 sq.m. each with shutters ( without taking off shutters from the frames) and removed from site complete all as specified.

M&L mild steel Bands, straps, supports or stays for rainwater , fan clamps Ventilating pipes, including bolts , if required; hooks ( stay), heavy, for large gates; hook and pintol hanges; large hasps and staples ; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters ; knee piece inserts; two way and three ways straps , plate washers and similar small articles conforming to Fe-290 Gde -E-165 complete all as specified.

M&L 2nd Class Hard wood ( Sal) Plain , solid , straight chowkhats and frames , wrought , framed rebated on the solid , rounded or chamfered , put together with glue, pinned at joints, supplied and fixed complete all as specified.

M&L Preaparation surfaces of wood and wood based materials and treated with tar to backs of chowkhats etc. area tarred exc 0.10 sqm but not exceeding 0.50 sqm each complete all as specified.

M&L preparing surfaces of wood and wood based materials , steel and iron work , new or old , of any description and girth, not otherwise described , and treating small articles such as stop, covers, gully gratings, holdfasts, ends of posts, backs of chowkhats, etc.'area tarred n exc 0.1 sq.m each with tar or coal tar black paint all as specified.

M & L 2 nd class hard wood 35 mm thick Plain , framed panelled shutters ( any number of panels), with panels of timber flat on both sides (feather edged) or of veneered particle board medium density, wood particle board with commercial face veneers fitted to chowkats complete all as speciifed and directed.

M&L 35 mm thick, 2nd class Hard wood ( sal) Glazed and skeleton door shutters , open rebated and prepared to receive glass, gauze, etc. ( without sash bars), edges of framing plain, chamfered or rounded , fitted with cut and mitred beads for securing glass/gauaze complete all as specified.

M & L for preparing new wood or wooden based surfaces of any description, not otherwise described over 10cm width or girth applying two coats of synthetic enamel paint over a coat of pink primer complete.

M & L Preparation of old painted wooden surfaces of any description not otherwise description over 10 CM width or girth and apply one coat of synthetic enamel complete all as directed.

S&F Factory made solid panel PVC door shutter 30 mm thick (style) con-sisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be cov-ered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain col-our PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site including fixing shutter with three nos Aluminium butt hinges for each shutters as per specification complete all as specified and directed.

S&F Solid PVC door frame of size 50mmx47 mm made out of 5 mm plain colour PVC sheet reinforced with Mild steel square tube complete all as specified and directed.

S&F Aluminium, anodised, barrel tower bolts of extruded section and fixed, 150 mm length of bolt, ISI marked complete all as specified.

S&F Aluminium, anodised, barrel tower bolts of extruded section and fixed, 200 mm length of bolt, ISI marked complete all as specified.

S&F Butt Hinges, medium weight, cold rolled mild steel, 100 mm size, ISI marked complete all as specified.

S&F Aluminium handles, cast type anodised 'D' shaped , 150 mm long ISI marked all as specified.

S&F 250 mm long Aluminium alloy anodised, sliding door bolt with hasp, staple ( bolt type) ISI marked and fixing clips of sheet , cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed complete all as specified.

Supply & Fix Stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperature 1.40 mm and fixed with tinned tacks or galvnized wire staples.

Supply & fixing in repairs Stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperature 1.40mm and fixed with tinned tacks or nut and bolt with ms flat strip fixed to steel windows , wooden doors etc ,or galvnized wire staples complete all as specified and directed.

S & F in repairs 300 mm mild steel, ordinary rat tail rod pattern spring including roller and roller plate complete fixed to steel frame / wooden frame including necessary welding, cutting, opening of wall for fixing bracket and making good complete.

M & L for PCC 1:2:4 type C-1 (using 12.50 mm graded stone aggregate) as in hold fasts including necessary use and waste of form work complete all as specified and directed.

Demolition cement concrete (unreinfoced) of any description and in any position not otherwise specificially provided for.

M&L 75mm thick PCC 1:3:6 type C-1 using 20 mm graded stone aggregate as in plinth protection or similar places, laid in alternate bays and filling the joints with & including bitumen and sand 1:3 by weight, surface finished even and fair without using extra cement complete.

Demolition Brickwork or stone boulder masonry, built in cement mortar or cement lime mortar including all quoins,arches, pillars,etc. but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified.

M&L Brickwork with modular sub class 'B' bricks, straight or curved on plan exceeding 6 M mean radius in built in cement and sand mortar 1:6 complete all as specified.

Cutting openings, through brick walls for door, window and other openings or enlarging existing window/door openings built in cement mortat or cement lime mortar complete all as specified and directed.

Taking down cement plaster on brick or stone walls etc. including racking out joints, hacking for key, scrubbing down with water, any description etc. and removing of the rubbish outside MD land complete all as specified .

M & L Plastering 15 mm thick in two layers of 10 mm thick in bottom and 5 mm thick with WPC of top layer in Cement Mortar 1:4 on Fair Faces of Brick Wall, Cement block wall or on Concrete Surfaces, Surface Finished Even and Smooth without using Extra Cement complete all as specified and as directed.(WPC will be measured and paid separately)

Suppl only integral water proof compound and mixed with required qty as specified and directed.

Material & Labour for rendering 12 mm thick on fair faces of brick work or concrete surfaces in cement 1:6 and finished and even and smooth without using extra cemnt.

M & L 10 mm thick rendering in cement mortar 1:3 on concrete surfaces as in ceiling surface finish even and smooth complete.

M & L for preparation of newly plaster surfaces of ceiling and applying three coat of white wash complete all as specified and directed.

S&F ( in repairs) PVC valveless, syphonic action type flushing cistern, low level white or colour with inlet, ball value, float and handle including brackets and provision of 32 mm dia PVC flush pipe and making connections, complete all as specified and directed.

Dismantling PVC water tanks exceeding 500 litres but not exceeding 1000 litres capacity and removing complete all as specified

S&F Rotational moulded poly-ethylene water storage tanks (ISI marked) ( cylinderical vertical with closed top ) 1000 litres capacity ,hoisted and fixed in position complete all as specified.

S&F Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic ball , suitable for 20 mm bore pipe, screwed for iron pipe and fixed. .(Minimum weight 210 gms.) complete all as specified.

S & F in repairs PVC connection 15 mm dia 600 mm long with PTMT nuts at both ends complete all as specified and directed.

S & F( in repairs) Vitreous china wash down water closet pan (pedestal pattern), white including pedestal pan and trap, including seat cover for pedestal pan and connecting to drain or outgoing pipe and to flushing pipe, antisyphonage pipe etc complete all as specified and directed.

S & F in repairs 75 mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints laid in trenches or in floors

S & F in repairs 110 mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints laid in trenches or in floors

S & F in reapairs 75 mm dia PVC (SWR) bends any radius

S & F in repairs 110 m dia PVC (SWR) bends any radius

S & F in repairs 75 mm dia PVC (SWR) floor trap plain with grating including jointing with solvent cement

S & F in repairs 75 mm dia PVC (SWR) multifloor trap with grating including jointing with solvent cement

S & F 75 mm bore PVC cowl including taking out existing unserviceable cowl complete

S & F 110 mm bore PVC cowl including taking out existing unserviceable cowl complete

S & F in repair 110 mm dia bore PVC (SWR) junction single, single (T) equal or unequal with solvent cement joints, fixed to complete all as specified and directed.

S & F in repair 75mm dia bore PVC (SWR) junction single, single (T) equal or unequal with solvent cement joints, fixed to complete all as specified and directed.

S & F in repairs 110 mm dia PVC (SWR) branch piece, single (single Y) equal or unequal

S & F in repairs 110 mm dia PVC (SWR) branch piece, double (double Y), equal or unequal

S & F (in repairs) 75 mm bore cast iron Nahani trap with grating including jointing to waste pipe fixed in cement concrete type B1 (1:2:4) complete all as specified .

M & L for preparation of new or previously untreated steel surfaces of any description over 10 cm in width or girth not otherwise described and applying two coats of synthetic enamel paint over a coat red oxide complete all as specified and directed.

M & L Preparation of old steel surface of any description over 10 cm in width or grith not other wise described and applying one coat of synthetic enamel paint complete all as specified and directed.

Taking up or down steel tubing 15 mm dia bore and connection including removal from site complete all as specified and directed .

Taking up or down steel tubing 20 mm dia bore and connection including removal from site complete all as specified and directed .

Supplying,& fixing, 15 mm dia bore jointing and testing galvanised steel water tubing medium grade with all fittings such as bend, elbow, socket reducer etc fixed to walls and ceilings as in conceald or flush inside the wall complete all as specified and directed

Supplying,& fixing, 20 mm dia bore jointing and testing galvanised steel water tubing medium grade with all fittings such as bend, elbow, socket reducer etc fixed to walls and ceilings or laid in floors, complete all as specified and directed

M & L cutting chases for concealed water tubing, pinning in, making good of facings where required and pointing in cement mortar 1:3 to ends or edges etc, cutting not exceeding 10 cm width or girth, complete.

S & F in repairs vitreous china wash hand basin white or any colour , flat back of size 550mmx400mm fixed on and including cast iron cantilever bracket, 32mm dia brass waste coupling and 32 mm dia PVC waste pipe including fixing of tap, waste fitting including mixer or piller tap etc complete. Note :- Pillar tap shall be measured as supply only under respective item

M & L Preparing newly plastered or unplastered surfaces all as specified and directed.

Complete removal of exisiting wall treatment complete all as specified and directed.

M&L for applying 3 mm thick wall care putty on wall on internal old/new wall surfaces as per manufacturerer instruction complete all as specified and as directed

M & L for applying two coats of oil bound distemper over a coat of primer on prepared wall putty surfaces of internal wall all including washing floors, cleaning glass, joinery,electrical fittings, wiring etc. , of drops and splashes complete all as per specified and directed.

M & L Apply one coat of primer of Dr Fixit Primeseal diluted with update with potable water by volume in 2:1 ratio ( 2 parts primer and one part water ) and allow it dry for 2 to 3 hours and apply two neat coats ( one coat horizontal and other coat on vertical direction ) of Dr Fixit Raincoat Elastomeric Acrylic water proof exterior coating (off white or any tint / colour as approved by GE) over primer coat without dilution, apply by brush or roller at a time interval of 5-6 hours. Note:- All application shall be done through authorised company applicator as approved by GE.

M & L preparing old decorated plaster or un-plastered surfaces of ceiling and applying one coat of white wash including washing floors, cleaning glass, joinery,electrical fittings, wiring etc. , of drops and splashes complete complete all as specified and as directed.

M & L Preparation of old wall surface and apply one coat of white wash on wall surface including washing floors, cleaning glass, joinery,electrical fittings, wiring etc. , of drops and splashes complete all as specified and directed.

S & F in repairs CP grating of 5" dia (127mm) mm dia complete all as specified and directed.

S & F in repair corner shelf of 300 mm size with ABS brackets complete. all as directed and specified.

Supply only 15 mm dia bore basin mixture brass chromium plated with capstan heads screwed down high pressure with or without letter ‘HOT’ or ‘COLD’ with long screwed shanks and fly-nuts, screwed for iron pipe complete all as specified and directed.

S & F in repair 15 mm dia bore chromium plated 3 in 1 wall mixer non telephonic shower arrangement with connecting legs & wall flanges complete all as specified and as directed.

S & F in repair Bidet spray (Health faucet) with 1 meter tube and holder, complete all as specified and directed.

S & F in repair PVC bath cabinet box mirror type with shutter complete all as specified and directed.

S & F in repair CP Tumbler Holder, complete all as specified and directed.

S & F in repair CP Soap Dish with ABS dish Holder, complete all as specified and directed.

S & F in repair CP Toilet paper holder, complete all as specified and directed.

S & F (in repair) brass chromium plated angle cock 15 mm bore screwed for iron pipe or brass ferrule, complete all as specified and directed.

S & F in repair brass chromium plated towel rail 20 mm outer dia Bracket type, 60 cm long between flanges with and including chromium plated brass screws and wooden / plastic cleats, complete all as specified and directed.

S & F in repair over head shower with arm & flange of chromium plated with or without swivel joints, any size, including fixing to 15mm dia steel pipe for required length or union complete all as specified and directed.

S & F( in repair) 15 mm bore two way bib taps long body, with wall flange chromium plated cast copper alloy long body , screwed down, screwed for iron pipe or for brass ferrule, complete all as specified and directed.

S & F( in repair) 15 mm bore bib taps long body, with wall flange chromium plated cast copper alloy long body , screwed down, screwed for iron pipe or for brass ferrule, complete all as specified and directed.

S & F in repair vitreous china squatting pan “ORISSA PATERN” of size 580 mm X 440 mm, white, with integral foot rest (excluding flushing cistern and flush pipe) including connection to trap and to flushing pipe, anti syphonage pipe etc and making good to floor complete all as specified and directed.

S & F in repairs 18 mm thick Plywood grade BWR, type BB as in cupboard , wardrobe etc.

M & L 0.9 mm thick Decorative laminate type 1, of surface finish, colour and pattern as approved, fixed with approved adhesive over plywood as per manufacturer's instructions complete all as directed and specified.

S&F Aluminium, anodised, barrel tower bolts of extruded section and fixed, 100 mm length of bolt, ISI marked complete all as specified.

S&F butt Hinges, medium weight, cold rolled mild steel, 75 mm size, ISI marked complete all as specified.

S&F Aluminium handles, cast type anodised 'D' shaped , 100mm long ISI marked all as specified.

S & F 100 mm length Hasp and staple, mild steel, wire type stove enemelled black , including bolt to hinge plate and fixed with screws complete all as specified and directed.

Demolition of reinforced cement concrete of any descrption and any position as in roofs, floors,beams, landings, chajjas, balconies, cover slabs and similar suspended work complete all as directed.

Dismantling cast iron or mild steel work of any description not other wise provide for post , frame for sunshade etc,

S & F Joist, channel, angle or tee , square or rectangular sections, fixed indipendently including cutting to dead length where required, notching, drilling, fitting, riveting and/or welding or connecting with bolts and nuts , providing and fitting angle cleats, fish plates, gusset plates etc, complete all as specified and directed.(Fe-410-W(Gde-E-250) quality A).

S & F 12 mm dia 30mm long, Mild steel rag or lewis bolts, revits,screwed one end, with hexagonal or square nuts and washers, the other end enlarged and jagged or lewised, n exc 15 cm long complete all as specified and directed.

S & F Framed work as in grills for balcony, of MS tube for top rail and MS square bars for as guard bars, or rolled section as in sunshade, side supports or any situation of work etc, revited or forged in to spikes and similar work conforming to Fe 290. Gde-E-165 complete all as specified and directed.

M & L Dubbing out average 20 mm thick on irregular/ demolished surface of walls, concrete surface like cantiliver beam , chajjas, lintles, balconies etc in Cement plaster 1: 4 complete all as specified and directed.

S & F Pre-painted galvalum aluminium zinc coating steel based corrugated steel sheet 0.50mm thick (total coated thickness) of any colour having tensile strength of 550 Mpa minimum, yeild strength, it shall be coated with hot dip alloy of 55% aluminimum, 43.5% zinc,1.5% Silicon and finished with resin coat on both surface @ 150 gm/ sqm of coating as specified and shall be fixed with hot dip galvanised, self drilling and self tapping screws neoprened and EDPM washers as in roof covering all as directed at site all as specified and dircted.

S&F in repairs powder coated steel peg set having 06 Nos spikes fixed to wall complete all as specified and directed (Make as spproved by GE)

S & F in repair 25mm dia Powder coated curtain rod of 1 mm thick fancy type including modren bracket of any type or any design as approved by Engr -in Charge complete all as specified and directed

M & L for reparing of RCC projection, chajjas,roofs,facia, colum etc by necessary preparation i.e scrapping ,cutting,chiseling,derusting and cleaning exposed reinforecement, surfaces of damaged, loose RCC surfaces and applying one coat of cement slurry and filling the surfaces with cement concrete (1: 1-1/2: 3) using 12.5 mm graded crushed stone aggregate and reinforeced with welded mesh of weight exc 2Kg per sqm but n.exc 3Kg/sqm with or without facia and finished exc 5sqm each and thickness of RCC using coarse sand in patches area not each and thickness of RCC member n.exc 70mm at any height complete all as specified. Note : - Cost of formwork and welded mesh shall be deemed to be included.

S & F in repair powder coated aluminium door seal 30mm wide and length as per requirement of site including dust/insect arrestor complete all as specified and directed.

S&F powder coated aluminium ventilator cross section 63.5x38.10x1.5mm consisting of two partions upper portion shall have louvers with 3mm thick pin headed glass and aluminium wire cloth 0.30mm nominal dia of wire and average width of aperture 1.56m fixed with aluminium beads and securing on outer face of frame and lower portion of ventilation shall be fixed with 3mm thick pin headed glass with IDPE rubber gasket including aluminium beads, including preparation of jombs all around in CM 1:3 finishing even and smooth complete all as specified and directed.

Dismantling of wall and ceiling boards (fiber, pulp, insulation, etc) or insulation boards /slabs/blankets, any thickness including cover fillets complete.

S & F Anodised aluminium snap grid frame work of size 605 x 605 mm for false ceiling securing with 4 mm dia GI wire of 1.20 mtr centre to centre tying to roof members or bolting with self taping screws including all necessar y arrengements complete all as specified and directed

M & L 6 mm thick non asbestos fibre cement building board fixed or laid/ inserted to aluminium snap grid frame work with screws complete all as specified and directed.

Treating the soil under the plinth protection at the rate of 5 litre of emulsion per square metre of surface area.complete all as directed and specified.

S & F Powder coated aluminium sliding glazed windows with three track shutter sliding (two shutters glazed and one shutter wire mesh) shall be two part as upper part shall be three movable shutter and lower part consist three shutter (one openable in centre and both side fixed type shutter with frosted glass) with following specification and making good the adjacent side of jambs of windows by plastering in CM 1: 3 even and smooth complete etc . shifting of existing cooler stand where required complete all as specified and as directed by Engr-in-charge. (i) Windows frame of cross section 101mm x 44mm x 1.5mm thick. (ii) Three way track for sliding shutters of cross section 91.8mm x 31.75mm x1.1mm thick. (iii) Sliding shutter frame of cross section 40 x 18 x 1mm thick. (iv) 4 mm thick tinted glass superior quality. (v) IDPE Rubber guasket for fixing of glass. (vi) Locking cleats per shutter -01 Nos. (vii) Sliding rollers per shutter - 02 Nos. (viii) Aluminium wire cloth 0.30mm nominal dia of wire and average width of aperture 1.56mm for shutters 01 Nos. (Ix) fixing screw for frame with wall per windows- 08 Nos.

Taking down of existing roof treatment including rendering (over RCC roof) by picking, scrapping, blow lamps, etc. including sweeping, cleaning the surface, washing down with water and removal of old rubbinsh complete all as specified.

M & L plain cement concrete type B0 (1:2:4) using 12.5mm graded crushed stone aggregate mixed with intergral water proofing chemical PIDIPROOF LW of Dr Fixit of Pidilite inndustries Ltd or STP No 1 liquid) of STP Ltd @200 Mililitre per 50Kg of cement, as in filling in depression and padding on roof surfaces fair and even without using extra cement complete all as specified. Note :- WPC will be paid separately.

M & L 10 mm thick plaster in one layer in CM (1:3) over concrete roof padding, cement mortar mixed with and including chemical compound PIDIPROOF LW of DR FIXIT of PIDILITE INDUSTRIES LTD mixed in proportion 200 millilitre per 50 Kg cement or STP No. 1 (Liquid) of STP Ltd. in proportion 200 ml per 50 Kg cement as per manufacturers instructions laid when concrete is still green and finishing the surface fair and even without using extra cement complete . Note :- WPC will be paid separately.

M & L Water proofing treatment on "Non approachable / non accessible roof" surface (Horizontal & Vertical surfaces) in following sequence through manufacturer / authorized applicator of the manufacturer all as specified and directed complete. (i) Properly cleaning and drying concrete surfaces. (ii) Applying a coat of oxidised bitumen based solvent primer 0.3 Kg / Sqm. (iii) APP based polymeric membrane of 3 mm thick reinforced with polyster non wove fabric laid with 100 mm over laps sealed and bounded to the surfaces by 'torchon' method. (iv) Applying coat of bitiminous aluminium paint @ 200 Gram / Sq M (minimum) in two coats. Make incorporated : HYPERPLAS POLYSTER OF IWL (INDIA) LTD or equivalent in Pidilite industrries Ltd /STP Ltd all as specified and as manufacturer instruction complete.

Supply & Fixed (in repair )Steel rolling shutters, with ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer; erected inposition as indicated, complete.

S & F in repair PVC cabinet of required size fabricated by joining for 18mm plain white thick PVC Celuka ply fixed with each other using solvent cement adhesive and screws and 18mm thick PVC sheet as backing of cabinet fixed with screw and solvent cement adhesive etc.

S&F in repair factory made PVC side laminated shelf /partition of required size consisting of panel of 18mm thick celuka PVC ply and for supporting the hold of shelf /partition and shall provided 3 edges in size 18mm x 18mm as per required length the front side of the edge visible in the front of the shelf / partition to be edge lipped by 18mm width x 1mm thick PVC Sheet of density 600 Kg/Cum manufactured by ISO 9001 - 2015 Cerfified campany , using solvent cement etc.complete as direction of Engr-in-Charge manufacturers specification and drawings.

S & F Stainless steel self closing hinge of 75 mm size for PVC door shutter complete as specified and directed.

S & F 50 X 15 mm size magnet door catcher for closing for PVC door shutter complete as specified and directed.

S & F 100 mm size MS mat / glossy finish handle complete as specified and dirceted.

S & F mild steel drawer cabinet channel for moving the drawer etc complete as specified and directed.

S & F modular type stainless steel basket of any size as approved (dia of wire not less than 3.0mm) of 24" x 18" x 6" or 20" x 18" x 6" shape with side sliding roller clip and sliding rails on both side fixed with steel screws incl all fixing arranement complete as specified and dirceted.

Demolition lime Concrete (un-reinforced) of any descriptions in any position complete all as specified and directed.

M&L for 15mm thick rendering in CM 1:3 on concrete/brick surface finished even and smooth without using extra cement mixed with WPC Note:- ( WPC shall be measured and paid separately )

M & L for apply one prime coat acrylic polymer modified water proofing coating(Brushbabd of FOSROC or equivalent) and over that two coats of acrylic polymer modified two component elastomeric water proofing membrance coating (Brush band of fosroc mate or equivalent) complete all as specified as per manufacturers instruction as directed by engineer-in-charge.Make:- Fosroc,Sika,Dr fixit Note :-1 . This item shall only be executed through level 4 or level 5 certified and authorised applicator of the company. 2. A warranty for 5 yerars in the form of written agreement shall be submitted by the contractor. 3.The rate quoted by the contractor shall include all the provision mention in this item including notes.

M & L PCC 1:5:10 type E-2 using 40 mm graded stone aggregate as in mas concrete complete all as specified and directed.

Cleaning reinforcement of total rust by tapping and using mechanical wire brush or any other suitable way including from behind and around the reinforcement bars to give it a totally rust free finished steel surface (Mode of measurement - concrete surface area with exposed reinforcement)

Providing and supplying the one competent, Polymer modified cementitiuos anti- corrosive primer (having the technical parameters mentioned in material specifications ) formulated to provide dual protection of a polymeric barrier and an integral corrosion-inhibting system, to the existing steel and additional steel provided before patching of damaged areas, using suitable tools and equipment inclusive of Material, Manpower and Equipment. BASF Master Emaco P130/ Fosroc Nitoprime Zincrich /Sika Rustoff 100 or other equivalent (mode of measurement - concrete surface area with exposed reinforcement)

Providing and repairing the damaged concrete portion with single compnent, fibre reinforced, dual shrinkage- compensated thixotropic, cementious ptch repair mortar ( having the technical parameters mentioned in material specifications ) capable of applying 25mm thick in single layer initially by hand and finishing with trowed carefully compacting the same around the rebars and finishing to bring it in line with existing concrete surface withh an average specified thickness inclusive of manpower , material and Equivalent Master Emaco 5348 of BASF Renderoc HB-60 of Fosroc/Sikadur 41 of Sika or equivalent. (a) 25mm thickess

Description same as per item No 134.00 above but in 50 mm thickness in two layers

Providing and fixing shear connections of 10 mm dia HYSD steel with two components, styrene & cement free epoxy- acrylate fixing and anchoring compound ( having the technical parameters mentioned in material specifications) using standard sealant applicator gun after drilling holes of 12mm diameter to a minimum depth of 100 mm at required locations, inclusive of all material, manpower and equipmentMasterflow 935 of BASF/ Lokfix P25 of Fosroc or equivalent scaffolding rate also included in this.

Providing strengthening to columns by all round jacketting to specified columns up to top of foundation level using minimum 125 mm thick M-45 self compacting concrete as directed, including removing loose concrete, cleaning the reinforcement mechanically, using wire brush etc. complete but excluding formwork and reinforcement ;Cement content: 380Kg/ cum Admixture: Master Glenium of BAF or equivalent. Note: Thickness of 125mm shall be measured from the outer face of main reinforcement & additional material poured beyond the same shall not be seperately measured and paid for.

Centering and shuttering including strutting, propping etc. and removal of form for (a) columns, pillars, Piers, Abutments, Posts and Struts.

Mild steel TMT bars 5mm dia and over upto and including 10mm dia in stirrups, spacers,distribution and binders cut to length, bent to shape required, including cranking, bending spirally for hooping and binding with mild steel wire (annealed) not less than 0.9 mm dia., or securing with clips.

M&L for chipping of spalled and loose concrete and cleaning rust from re-inforcement by sand blasting, scrubbing down conrete sufrace with wire brushes cleaning with water allowed to dry and applying a layer of zinc rich epoxy primer as antirust on all exposed reinforcement followed by a layer of bonding coat of approved epoxy adhesive on complete exposed surfaces of concrete to be gunited all as specified and applying two layess of guniting over steel welded mesh 2mm dia of wire and aperture 75mm,total thickness of gunite n.exc 25mm thick (average thickness) in cement mortar 1: 2 using OPC 53 grade cement mixed with polycrete admixture @ 2% by weight of cement or as per manufacturers instructions and finally applying cement plaster over gunited surface of required thickness to give even, uniform and smooth finish conforming to proper gerometrics in cement mortar ( 1 : 3) to match with the existing surface as in sides and soffits etc of slabs, chajjas, fins, facias, parapets , columns and beams etc complete including necessary scaffolding, shuttering, necessary chases to brick work or RCC members at any height upto 4 storey bldgs all as specified. (Note : Steel welded mesh is to be tightend / welded with the existing re-inforcement. The cost of welded mesh is deemed to be included in the unit rate quoted by the contractor).

Point wiring with 1.5 Sqmm (nominal cross sectional area ), single core, PVC insulated with multistranded PVC unsheathed FR LSH copper conductor cable in and including rigid non- metallic PVC concealed conduit (FRLS) of suitable size medium grade ISI marked complete , including one continuity earth wire of PVC insulated, unsheathed 1.5 Sqmm (nominal cross sectional area ) FR LSH copper conductor connected to all fittings, common earth and connected to earth dolly including including modular metal flush box , cover plate and cover frame of suitable size incl taking down carefully copper/alluminium point wiring light, fan, sockets , all fittings and accessories and making good disturbed surface of walls and floors etc. complete all as specified and directed for One light / fan /bell controlled by one, one way switch 5/6 Amps

Description same as per item No141.00 above but One 3 pin, 5/6 amps socket outlet point on independent board controlled by one, one way 5/6 amps switch

Description same as per item No141.00 above but One 3 pin, 5/6 amps socket outlet point on same board controlled by one, one way 5/6 amps switch

Description same as per item No141.00 above but One light point controlled by two way switch 5/6 Amps

Point wiring with 2.5 Sqmm (nominal cross sectional area ), single core, PVC insulated with multistranded PVC unsheathed FR LSH copper conductor cable in and including rigid non- metallic PVC concealed conduit (FRLS) of suitable size medium grade ISI marked complete including one continuity earth wire of PVC insulated, unsheathed 1.5 Sqmm (nominal cross sectional area ) FR LSH copper conductor connected to all fittings, common earth and connected to earth dolly for one three pin 15/16 amps socket out-let point on an independent board including modular metal flush box , cover plate and cover frame of suitable size incl taking down carefully copper/alluminium power point wiring switches , sockets , and making good disturbed surface of walls and floors etc. complete all as specified and directed

S&F in replacement of Ceiling rose three terminals surface bakelite type, AC, 50 HZ, 230V

S&F modular switch 1 way 6 A , 1 module complete all as specified and directed.

S/F modular socket 6 Amps 2/3 pin combined 2 module complete all as specified and directed.

S/F switch modular type 16 A, 1 module complete all as specified and directed.

S/F socket modular type multipurposes 6/16 A, 2 module complete all as specified and directed.

S/F modular bell push type 6 A ,1 module complete all as specified and directed.

S/F bell multi music type AC 230 volts single pole complete all as specified and directed.

Supply and fixing surface /wall mounted LED batten (other than slim channel type) poly carbonate housing for retrofit LED tube T-8 type upto 1x20 watt, 4 feet long pre wired incl integrated electronic driver complete with all connected accessories all as specified and directed.

Supply and fixing Ultra bright LED polycarbonate tube light 4 feet long 18 to 20 watt with THD < 15% suited for T-8 tube light liminaire with system efficacy >= 120 lumen per watt. High quality polycarbonate end caps in white finish and snap fitted to the housing complete all as specified and directed.

Supply and fixing wall mounted LED tube light fitting 10 watts comprising batten of extruded aluminium heat sink provided for efficient heat dissipation & integrated electronic driver 10 W LED 2 feet long ,THD less than 10% and system efficacy >= 110 lumen per watt complete all as specified and directed.

M&L for LED Bulk head fitings 6 to 13 watts designed for modern homes available with premium quality diffuser for glarefree light and easy to install snapfit installer complete including taking down of old CFL/bulb bulk head fitting, making good of surfaces all as specified and directed.

S&F modular angular lamp holder, PVC / Polycarbonate fancy type with back plate for fixing of EB 22 LED lamp 240 volt including taking down complete all as specified and as directed.

S&F decorative , wall mounting , brushed nickel finish fixture with opal glass diffuser suitable with 9 watt LED lamp B 22 base.

S & F LED bldg security light fitting 30 watt system efficacy >= 110 lumen per watt made up of pressure die cast aluminium housing with acylic cover as diffuser with IP-66 protection complete all as specified and directed.

S&F MCCB ,DB VTPN wall mounted double door 6 way, IP 43, IK 09 415 volts with facility to provide MCCB 3 pole 125 Amps 25 KA as incomer and SP/TP MCB's/Isolator as outgoing including removed old U/S DB in the wall again fixing the new DB and wall finising complete all as specified and as directed.

S&F MCB DB SPN 12 way, IP 43, IK 09 double door with 200 Amps rated bus bar ,230 volts, 50 Hz complete all as specifed and directed.

S&F MCB DB SPN 06 way, IP 43, IK 09 double door with 200 Amps rated bus bar ,230 volts, 50 Hz complete all as specifed and directed.

S&F MCCB 3 pole 63 Amps ,415 V 125 A Hz with rupturing capacity 25KA (Ics = 100% Icu).

Supply & Fix MCB SPN 32 Amps current rating 'C' series 10 KA breaking capacitycomplete all as specified and directed.

Supply & Fix MCB SPN change over 32 Amps current rating 'C' series 10 KA breaking capacitycomplete all as specified and directed

Supply & Fix MCB SP 6 to 32 Amps current rating 'C' series 10 KA breaking capacitycomplete all as specified and directed.

Supply and fixing TV socket outlet complete all as specified and as directed

S&F RJ 45 telephone jack with shutter complete all as specified and as directed.

S&F Telephone socket complete all as specified and as directed.

M&L for 20A DP energy saving switch (with key tag) 3 module complete all as specified and directed.

Sub main wiring with 2 single core,10 Sqmm, PVC insulated PVC unsheathed stranded FR LSH copper conductor cable in and including PVC concealed/ surface conduit of earth wire with 1 x 10.0 Sq mm copper cable fixed along with the sub main in PVC conduit and connecting to earth dolly complete including taking down old sub main wiring all as specified and directed.

Sub main wiring with 2 single core, 04 Sqmm, PVC insulated PVC unsheathed stranded FR LSH copper conductor cable in and including PVC concealed/ surface conduit of earth wire with 1 x 04 Sq mm copper cable fixed along with the sub main in PVC conduit and connecting to earth dolly complete including taking down old sub main wiring all as specified and directed.

Taking down existing exhaust fan/ceiling fan of any sweep after disconnecting necessary connection from ceiling rose to fan and deposit to MES store yard complete all as specified and as directed

S&F in replacement of exhaust fan non metalic single phase 230 volt of size 250 mm sweep with louver all as specified and as directed.

S&F in replacement of exhaust fan , steel body AC single phase 230 volt of size 300 mm mm sweep complete with blade, frame and louvers all as specified and directed incl making/alteration of hole wherever necessary making good disturbed surface, painting to match with existing surfaces.

Supply and fixing in replacement of ceiling fan 1200 mm sweep, BLDC fan having service value >= 8 withcompatible regulator as per Sr. Item No. 178 complete all as specified and as directed.

Supply , fixing rigid non metallic PVC conduit fixed conceiled/on wall wherever necessary with all connected accessories 20 mm dia for cable TV connections complete all as specified and as directed

S&F fan regulator 02 module capacitor type for operating BLDC fans as per Item no. 176 complete all as specified and as directed.

M&L for single phase meter protection box conceiled in wall made pout of MS sheet 2 mm thick of size 200 mmx200x150mm complete with hinges and 2mm thick MS door with acrylic/glass opening of size 100mmx100mm for meter reading complete incl two coat of synthetic enamel paint over a coat of red oxide primer incl removal of existing single phase meter and fixing inside meter protection box with all connecting wires nut bolts etc all as specified and directed.

S&F electric water heater storage type of storage capacity of 25 Ltrs (5 star rated) with glass coated heating element including PTMT connections 15 mm size with nuts and length of 450 mm with all fixing arrangement including metal plug and socket. The geyser should be tough enough to withstand pressure upto 8 bars. The inner tank should have a minimum 7 years warranty.

Taking down existing old Extg unserviceable LT UG/ service cable of any description and size complete all as specified and directed.

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for laying of cable etc. n exc 1.5 m in depth and getting out

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm.

Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point

Supplying and laying un-reinforced precast concrete cable cover, Class LV, Type I, flat, size 250 mm x 150mm x 40mm

Supply and laying fine sand for cable protection in layers incl punning all as specified and directed

M&L for XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 50 sq. mm 3.5 core in trenches / under PCC/interlocking tiles incl making good of surface with PCC/ cementing incl connecting to existing LT panel board and VTPN DBs all as as directed at site

M&L for Tubes, 'light grade,galvanised, with all fitting of size 50 mm ;laid in trenches or fixed in wll with saddles for cale protection/ mounting security lights incl bending and cutting to required length all as specified and directed

Replacement of Earthing complete with galvanized steel earth plate electrode 600 x 600 x 6 mm thick, buried directly in ground vertically to a depth not less than 2.25 meters deep below ground level with top edge of the plate not less than 1.5 Mtrs below normal ground level connect to galvanised earth lead wire of 4.0 sqmm size by means of bolts, nuts, check nuts and washers of galvanized iron or steel up to 7.5 meter length including connected to earth plate including necessary excavation & earthwork, PCC (1:3:6) type C-1 earth chamber, 40 mm thick RCC cover 1:2:4 mix with 6mm dia nominal reinforcement @ 150 mm c/c both ways etc complete all as shown in electrical plate No 5, connected to earthing test point complete including testing on completion all as specified.

sunway associates

GIRIRAJ CONSTRUCTION AND TRADERS