15th Finance Scheme 2025-26 1st Installment Tied grant Providing Deep Borewell at Ramanujapuram AD Street In Sholapuram Town Panchayat.

Drilling of borewell anywhere in Tamilnadu including transportation from one place to another place within Tamilnadu in alluvial soil or sedimentary strata of clay and sand or sand, stone, shale, pebbles, boulders etc., by first taking a pilot bore of 140 mm/150mm dia and then enlarging to required dia by direct or reverse rotatry mud and circulation method using contractor's rig, fuel, labour, drilling, betonite mud and water required for drilling at the site shown by the TWAD officers including construction of mud pit.

below 60mdepth

Reaming140/ 150 mm dia pilot bore to 300mm dia bore as directed by the Departmental Officer.

below 60mdepth

Supply of approved quality PVC CASING PIPE 150mm CS plain pipe With Exice Duty AS PER IS 12818/1992.

Supply of approved quality PVC CASING PIPE 150mm RS Slotted pipe With Exice Duty AS PER IS 12818/1992.

Supply of approved quality 150mm dia OD PVC end plug etc. complete as per standard specification.

Labour charges for inserting 150 mm/200 mm/250 mm dia (Pre Casing pipes assembly (With slots or without slots) in the drilled hole including welding the joints etc., complte and supply packing annular space with pebbles of size and quality as approved by the Executive Engineers of TWAD

Charges for developing the borewell with air compressor of 300 cfm capacity (Minimum 8 Hours) including transportation labour and fuel charges for compressor as directed by TWAD Board officers and conducting yield test by 'V' notch method.

Supply and fixing of 32mm UPVC pipe including cost and conveyance of all materials and labour charges etc complete as per standard specification. TWAD P-19

Supply and run off 1.5sq. mm 3 core 1.1 KV Grade Copper cable conforming to IS 694/1990 Part I With ISI Marking.

Supply and fixing of 2HP Submergible Motor pumpset of 20x150 LPM/M of ISI make approved quality, including cost of materials to site etc., complete as per standard specification

Supply and fixing of 2HP Submergible Motor pumpset of single phase Panel Board with two level guard and auto start of ISI make approved quality, including cost of materials to site etc., complete as per standard specification.

Labour charges for errection of submercible pumpset in bore well / open well including fixing and jointing submercible cable with proper clamps upto the starter to required depth and also fixing of riser pipes to the required depth valves erection clamps, pressure gauges upto the exterior wall of pump room and erection of panel board consisting of TPICN switches starter, voltmeter, Ammeter, three pilot (indicating) lamps capacitor single phasing preventer, water levelguard and laying and jointing the cables and twin earthing as per IE rules etc., complete and testing pumpset and trail run for 10 days.

Supply and delivery of MS Kiosk of size 0.75m x 0.45m x 0.75m made up of MS angle of size 50mm x 50mmx 4mm alround covered with 16 gauge MS sheet and kiosk door made up of MS plates of size 25 mm x 3 mm including cutting, welding, grinding, locking arrangements etc., complete as per standard specification.

Earthwork excavation for foundation in all soil and sub soils of full depth an may be directed refilling the sides of foundation with excavated earth in layers not more than 10 cm thick well complying with standard specification depositing the surplus earth with in the compound in places show by the departmental officers with initial leads and clearing and leveling of site etc., complete complying with standard specification.

Supplying and filling in foundation and basement with Crushed Stone Dust (M- dust) in layers of not more than 15cm thick well rammed watered and compacted etc., complete complying with standard specification.

Cement concrete in 1:4:8 (One part of cement, Four part of M sand eight part of ISS gauge HBG metal) using 40mm ISS gauge HBG metal including cost of conveyance of metal from approved quarry at site including cost of cement and all labour watering including mixing dumpling and laying in layer of not more than 15 cm thick and tampering to consolidation curing and all other incidental any complying with standard specification etc., as per T.N.D.SS.No.28.

Brick work in cement 1:5 mix (One part of cement Five part of sand) Using well burnt country brick of size 8 ¾ x2 ¼ x2 ¼ including cost and conveyance of the brick at site including cost of cement and all other incidental charges and labour charges etc. complete for foundations and basement T.N.D.S.S. No: 31.

Providing and laying in position Standardised Concrete Mix M-20 Grade in accordance with IS 456 - 2000 using 20mm and down graded hard broken granite stone jelly for all RCC items of works with minimum cement contenet of 325Kg/ cum and maximum water cement ratio of 0.55 including admixture (Plasticiser / super plasticiser) in recommended proportions as per IS 9103 to accelerate, related setting of concrete, improve workability without imparing strength and durability with about (5.0cum), 7730Kg of 20mm machine crushed stone jelly and with about (3.3 cum), 5156kg of 10 - 12mm machine crushed stone jelly and with about (4.79cum) 7670 kg of Crushed Stone Sand (M- Sand), but excluding cost of reinforcement grill and fabricating charges centering and shuttering but including laying, vibrating with mechanical vibrators, finishing, curing, etc and providing fixtures like fan clamps in the RCC floor / roof slabs wherever necessary without claiming extra cost etc., complete complying with standard specification and as directed by the departmental officers -

Supplying fabricating and placing to position MS or RTS rods including cost of steel, binding wire and labour charges for cutting bending, cranking, tying and lying in position etc., all complete as per standard specifications.

Plastering with CM 1:5 mix 12 mm thick in all floors complying with including cost and conveyance all materials and labour charges for mixing applying and finishing smooth etc., complete as per standard specification.

Painting two coats of newly plastered wall surface with ready mixed plastic emulsion paint of first class quality and of approved colour over a priming coat including thorough scrapping, clean removal of dirt, and including necessary plaster of paris, putty, wherever required etc., complete complying with standard specification.

IDEAL ENGINEERING (BID ID -1426938)