GE CHM 60 2019 2020 REPAIR OF COMPOUND WALL PATH FENCING GATE AND HARD STANDING CULVERT RETAINING WALL UNDER AGE BR II AT CHANDIMANDIR

Amount

Dismantling of posts or struts of RCC) any section incl taking out embedded portion and making good disturbed portion, (posts embedded in concrete or in hard core) complete all as specified and directed

Taking down existing barbed wire of any description and removal of the same from site complete all as specified and directed.

Surface dressing in and including site clearance in soft soil including cutting of bushes & small shurbs etc comolete all as specified and directed.

Excavation in post holes (or similar hole) each in hard and dense soil n.exc 0.50 cu m getting out and removing surplus spoil at a distance not exc 50 metre and making good surfaces complete all as specified and directed.

Material and labour for plain cement concrete 1:3:6 type C-2 using 40mm graded crushed stone aggregate as in foundation, filling and mass concrete complete all as specified & directed.

Material and labour for mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia. or securing with clips complete all as specified.

Material and labour for mild steel work as in joist, channel, angle, or tee sections, fixed independently, without connecting plates, etc. (cut to ordinary lengths i.e. within 20mm of the length indicated) quality confirming to grade Fe-410-O or Fe-310-O, complete all as specified and directed

Supply and Fixing mild steel work as in iron post / posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc, flat iron fillets including all necessary drilling, bolting or riveting etc and similar work conforming to Fe-410-W (Gde.E-250)quality-A or Fe 290 (Gde -E-165) complete all as specified and directed.

Supply and fixing mild steel screw bolt (machine made) with hexagonal at one end and screwed the other or screwed both ends, each screwed end to be fitted with washers and one hexagonal exc 5cm but n.xc 10cm long, diameter of shank 5 to 10mm, complete all as specified and directed.

Material and labour for preparation of new steel surfaces over 10 cm width or girth and applying two coats of synthetic enameled paint over a coat of red oxide primer complete all as specified & directed.

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc including provision of binding wire complete all as specified and directed.

Supply only chain link fencing of 3.00 mm dia galvanized steel wire, size of mesh as approved complete all as specified and directed. Note : (i) Fixing included under item No 11 here-in-before. (ii) Unit weight (weight per sqm) of chain link fencing shall be derived as per site through a BOO appointed by GE in presence of Contractor's authorised rep and shall be kept in record.

Dismantlng fencing wire mesh any type complete all as specified and directed

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed

Material and labour for framed work such as grills, grating, framed guard bars, walk ways, railings etc. using steel conforming to Fe-310-O or Fe-410-O fixed as in repair complete all as specified and directed.

Material and labour for plain cement concrete type C-1 (1:3:6) using 20mm graded crushed stone aggregate as in seismic and other similar bands, shelves, copings, bed plates, hold fast, plinth courses and the like finished fair & even, including necessary formwork complete all as specified.

Demolition of stone slabs of any description in floors laid, bedded and pointed in any mortar complete all as specified and directed

Demolition of brick work built in cement mortar including all quoins, arches, pillar etc including disposal of demolished material n.exc 1.5 km complete all as specified and directed.

Demolition of cement concrete in ground floors and paving not exceeding 15 cm thickness (below or above ground) complete all as specified.

Material and labour for plain cement concrete 1:4:8 type D-2 using 40mm graded crushed stone aggregate as in foundation, filling and mass concrete complete all as specified & directed.

Material and labour for brick work with sub class ‘B’ bricks of class designation 10 all as per IS-1077-1992 (minimum compressive strength of brick 100 kg / Sqcm) old size bricks, straight or curved on plan exc 6 metre mean radius built in cement mortar 1:6 complete all as specified & directed.

All as per serial item No 21 herein before but except bricks (using old serviceable bricks)

Material and labour for brick work with sub class ‘B’ bricks of class designation 10 all as per IS-1077-1992 (minimum compressive strength of brick 100 kg / Sqcm) old size bricks, straight or curved on plan exc 6 metre mean radius built in cement mortar 1:4 complete all as specified & directed.

Taking down cement plaster from brick walls or concrete surfaces including raking out joints, hacking out for key, scrubbing down with water complete all as specified and directed and removing rubbish etc. at the places out side the premises complete all as specified and directed.

Material and labour for 15mm thick rendering in cement mortar 1:4 on brick walls or concrete surface and finished even and smooth without using extra cement complete all as specified & directed.

Desilting the drains, removal of mud, removing the grass, vegetation, shrubs etc from drain and removing the excavated soil to a distance n.exc 50 metre and depositing where difrected at a level not exceeding 1.5 metre above the starting point omplete all as specified & directed.

Material and labour for sand filling under floor or in foundation including watering and consolidation complete all as specified and directed.

Supply and fixing 40 mm thick factory made machine pressed precast concrete interlocking paver block, with grey cement and pigment, any shape and size confirming to IS 15658-2006 of, M-35 grade, joints filled with sand, fixed as in repair complete all as specified and directed.

Supply and fixing 40 mm thick, factory made machine pressed precast concrete interlocking paver block, with grey cement and no pigment, any shape and size confirming to IS 15658-2006 of M-35 grade, joints filled with ssand, fixed as in repair complete all as specified and directed.

Supply and fixing 60 mm thick factory made machine pressed precast concrete interlocking paver block, with grey cement and pigment, any shape and size confirming to IS 15658-2006 of, M-35 grade, joints filled with sand, fixed as in repair complete all as specified and directed.

Supply and fixing 60 mm thick factory made machine pressed precast concrete interlocking paver block, with grey cement and no pigment, any shape and size confirming to IS 15658-2006 of, M-35 grade, joints filled with sand complete all as specified and directed.

Supply and fixing 80 mm thick factory made machine pressed precast concrete interlocking paver block, with grey cement and pigment, any shape and size confirming to IS 15658-2006 of, M-35 grade, joints filled with sand, fixed as in repair complete all as specified and directed.

Supply and fixing 80 mm thick factory made machine pressed precast concrete interlocking paver block, with grey cement and no pigment, any shape and size confirming to IS 15658-2006 of, M-35 grade, joints filled with sand, fixed as in repair complete all as specified and directed.

Supply and fixing, factory made chequered cement concrete tiles 300mm x 300mm x 25mm thick (with grey cement and pigments), set, jointed and pointed in neat cement slurry with grey cement with pigment to match the colour of tiles, laid over and including 15mm thick screed bed in cement mortar 1:4, fixed as in repairs complete all as specified and directed.

Material and labour for preparation of new plastered or un-plastered surfaces of walls and applying two coats of cement base paint, complete all as specified and directed.

demolition of mild steel framed work as in gates including pintol ghinges, stops, hand made sliding bolts ec for ornamental and intricate design conforming to Fe-310-O or Fe-410-O complete all as specified and directed.

Fabrication and refixing only mild steel framed work as in gates including pintol ghinges, stops, hand made sliding bolts ec for ornamental and intricate design conforming to Fe-310-O or Fe-410-O complete all as specified and directed. NOTE : Qty obtained from demolition to be reused

Material and labour for factory made RCC man hole covers of size 600mm x 600mm x 75mm with plain faces, including RCC ring / frame and MS frame, set in cement mortar 1:4 complete all as specified.

All as per serial item No. 38 hereinbefore but size of manhole covers 750mm x 750mm x 75mm

Material and labour factory made RCC covers of size 450x450x50mm thick, type B-1 (1:2:4) using 20mm graded crushed stone aggregate including necessary reinforcement and form work as in cover slab of gully trap complete all as specified.

Material and labour factory made RCC manhole and drain covers / slab of of size 600mm x 1200mm x 100mm thick, type B-1 (1:2:4) using 20mm graded crushed stone aggregate including necessary reinforcement and MS frame in cement mortar 1:4 complete all as specified.

Material and labour factory made RCC manhole and drain covers / slab of of size 600mm x 1100mm x 100mm thick, type B-1 (1:2:4) using 20mm graded crushed stone aggregate including necessary reinforcement and MS frame in cement mortar 1:4 complete all as specified. NOTE for item No 38 to 42 : The rates quoted against this item shall be inclusive of steel reinforcement, MS frame, RCC ring / frame complete

Dismantling timber scantling exc 40 Sqcm in section in any position unframed work & removing from site complete all as specified and directed.

Demolition of Textile coverings including frames (if any) and cover fillets (measured flat and not girthed) completed all as specified and directed.

Material and labour for 2mm thick fibre glass reinforced translucent plain coloured sheeting with side lap, fixed with ‘L’ type or ‘J’ type or cranked hook, bolts, nuts, bituminous washer as in roof, complete all as specified and directed.

Supply and fixing Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed complete all as specified and directed.

Material and labour 25mm thick Jodhpur sand stone, width and length as ordered, first quality as in flooring and jointed with gray cement slurry and pointed in cement mortar 1:3 over and including screed bed 10mm thick in cement mortar 1:4 complete all as specified and directed.

Material and labour for earthenware designer cladding tile, of size 200mm x 100mm x 15mm thick as in dado, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile over 10mm thick screed bed in cement mortar 1:4, complete all as specified and directed.

Material and labour for glazed ceramic tiles, black colour in vertical surface 300mmx 200mm x 7mm joint free, first quality, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile over 10mm thick screed bed in cement mortar 1:4, complete all as specified and directed.

Material and labour for providing 1.0mm to 1.5mm thick dune/ grit finish ready mixed product with natural stone granules / minerals in particle size of 400-600, 600-800, 1000-1200 micros consisting of excellent synthetic /acrylic binder anti cracking, anti foaming, anti fungal, anti rusting agents and applied directly over the cement plaster / stone surface over a coat of base coat including necessary steel scaffolding work, complete all as per manufacturer instructions complete all as specified and directed.

Supply and fixing galvanized, 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacing and straining and fixing to any type of standard rails, straining bolts, including, securing or tying at crossings with and provision of galvanized mild steel wire, staples or steel pins, etc. as directed (each line of wire to be measured) complete all as specified and directed.

Material and labour for plain cement concrete 1:2:4 type B-0 using 12.5mm graded aggregate as in roof kerbs or mud stops rounded or chamfered on edges, complete all as specified & directed.

Material and labour for Precast cement concrete type B-1, 1:2:4 using (20 mm graded crushed stone aggregate) as in kerb stone finished with plain fair faces, including chamfers, weatherings, throating etc. and setting in mortar 1:6 complete all as specified and directed.

M/s Om parkash

MS GURENDER SINGH

aggarwal contractors and engineers

Satyadev Builders

B B BUILDERS