Reconstruction of Compound wall at North and West side of UGHS, Chalakkara.

Amount

Code No. 2.6.1A: Earth work in excavation over areas (exceeding 30cm in depth, 1.5m in width as well as 10sqm on plan) including disposal of excavated earth lead upto 50m and lift upto 1.5m ; disposed earth to be levelled and neatly dresses - all kinds of soil

Code No.2.8.1:- Earth work in excavation by mechanical means (Hydraulic excavator)/manual means in foundation trenches or drains (not exceeding 1.5m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms , lift upto 1.5m, including getting out the excavated soil and disposal of surplus excavated soil as directed , within a lead of 50m -All kinds of soil.

Code No. 4.1.3:- Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering.- All work upto plinth level -1:2:4 (1 cement:2coarse sand : 4 graded stone aggregate 20mmnominal size

Code No. 4.1.10:- Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering.- All work upto plinth level -1:5:10 (1 cement:5coarse sand : 10 graded stone aggregate 40mm nominal size)

Code No.5.9.16.1:-Centring and shuttering including strutting, propping etc.and removal of form for: Edges of slabs and breaks in floors and walls.Under 20 cm wide - Using with water proof ply 12mm thick , Mango / Silver wood scantling

Code No. 5.12:- Providing ,hoisting and fixing upto floor five level precast reinforced cement concrete work in string courses, bands , copings, bed plates, anchor blocks, plain window sills and the like including the cost of required centring, shuttering, finishing smooth with 6 mm thick cement plaster 1:3 (1 cement : 3 fine sand) on exposed surfaces complete but excluding cost of reinforcement with 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size

Code No. 5.22.7:- Reinforcement for R.C.C work including straightening , cutting , bending , placing in position and binding all complete Thermo - Mechanically treated bars(ISI BRAND OF APPROVED MAKE) including placing the M30 grade Athees make cover block @ 60cm centre to centr

Code No. 7.100.1:- Laterite Stone Masonry for building work using neatly dressed Laterite Stone of size 30x20x20 cm in cement mortar 1:4 (1 cement : 4 Coarse sand ) for foundation and basement

Code No.7.101:- Extra for Laterite stone masonry superstructure above plinth level and upto floor five leve

Code No. 10.25.2:- Steel work welded in built up section/framed work including cutting hoisting,fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In grating, frames, guard bar, ladder,

Code No.13.1.1:- 12mm cement plaster of mix :Cement mortar 1:4 (1 cement : 4 fine sand

Code No. 13.46.1:- Finishing walls with Acrylic Smooth exterior paint of required shade - New work (Two or more coat applied @ 1.67 ltr / 10 sqm over and including base coat of water proofing cement paint applied @ 2.20 kg /10 sqm

Code No. 13.61.1:- Painting with synthetic enamel paint of approved brand and manufacture to give an even shade - Two or more coats on new work

Code No. 15.9.2:- Demolishing stone rubble masonry manually / by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metre lead - In cement mortar.

Code No. 30.26D: Providing and laying filter media using HBG metal of 63mm size to a required thickness

Code No. 31.161.1D :- Providing, laying and jointing UPVC pipes(Finolex/Jain) (0.6 Mpa) conforming to IS specification 4985 and ISI marked including transportation to the site , lowering to the trenches, laying to proper grade and alignment, testing of joints with required testing equipment,including cost of solvent cement,UPVC specials such as bends,tees, threaded pieces,couplers,reducer,endcaps etc.,complete all as per IS and CPWD specification. - 75mm dia.

Code No.31.168.1K:- Providing and fixing in position UPVC moulded elbow (Finolex/Jain)(0.6 Mpa)conforming to IS 7834 part II and ISI marked,including labour charges for jointing, jointing materials etc,complete 75mm dia

SALEEM O.K

RAMESH TP