Construction of Baratghar in G.P. Madhapur village Madhapur Block Karhal Mainpuri

Excavation work by mechanical means (hydraulic excavator)/manual means in foundation trenches or drains (not exceeding 1.5m in width ir 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5m, including excavated soil as directed, within a lead of 50m. DSR N.2.9.1

1:5:10(1cement :5coarse sand(zone-iii) derived from natural sourse: 10 graded stone aggregate 40mm nominal size derived from natural sources). DSR N.4.1.10

Brick work with common burnt clay F.P.S. (non modular)bricks of class designation 7.5 in foundation and plinth in.cement mortar 1:6. DSR N.6.1.2

Excavating,supplying,stacking and filling of local earth (including royalty) by mechanical transport upto a lead of 5km also including ramming and watering of the earth in layers not exceeding 20cm in foundation trenches, plinth, sides of foundation etc. complete for all lift. DSR N. 2.25(a)

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in. S.I.no.6.4.2

RCC work Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level in :1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size derived from natural sourses). DSR N. 5.1.2

RCC work Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level in :1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size derived from natural sourses). DSR N. 5.1.2

Reinforced cement concrete work in beams,lintels suspended floors, roofs having balconies, shelves, chajjas, bands, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement, with 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stoneaggregate 20 mm nominal size derived from natural sources). DSR N. 5.3

Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers,abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and excluding reinforcement :1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size derived from natural sources). DSR N. 5.2.2

Steel reinforcement for R.C.C. work including straightening,cutting, bending,placing in position and binding all complete upto plinth level.mild steel and tensile steel bars. DSR N. 5.22.1

Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. DSR N. 10.1 (Gate) Holow pipe 50*25mm

D Angles (40*40*5)

W Angles 35*35*5

Flat 25*5 mm

10mm square bar 100mm c/c

Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works.DSR N. 10.25.2

12 mm cement plaster of mix in 1:6 (1 cement: 6 fine sand) DSR N. 13.1.2

15 mm cement plaster on the rough side of single or half brick wall of mix in 1:6 (1 cement: 6 fine sand) DSR N. 13.2.2

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level in 1:2:4 (1 Cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) . DSR N. 4.1.3

15 mm cement plaster on rough side of single or half brick wall of mix ( 1:4 (1 cement: 4 coarse sand). DSR N. 13.5.1

Centering and shuttering including strutting, propping etc. and removal of form for Foundations, footings, bases of columns, etc. for mass concrete DSR N. 5.9.1

Centering and shuttering including strutting, propping etc. and removal of form for Suspended floors, roofs, landings, balconies and access platform . DSR N. 5.9.3

Centering and shuttering including strutting, propping etc. and removal of form for Lintels, beams, plinth beams, girders, bressumers and cantilevers DSR N. 5.9.5

Centering and shuttering including strutting, propping etc. and removal of form for Columns, Pillars, Piers, Abutments, Posts and Struts . DSR N. 5.9.6

Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50gram/litre, of approved manufacturer and of required shade and collour all complete to achieve even and colour, (two or more coats) over and including water thinnable priming coat with cement primer having VOC content less than 50gram/litre.DSR N. 13.41.1

Finishing walls with water proofing cement paint of required shade ,New work (Two or more coats applied @ 3.84 kg/10 sqm).DSR N. 13.44.1

Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters,35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws.DSR N. 9.21.1

Providing and fixing ISI marked aluminium butt hinges anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour or shade with necessary screws etc. complete, 75x45x3.2mm .DSR N. 9.95.8

Applying priming coat With ready mixed aluminium primer of approved brand and manufacture on resinous wood and plywood. DSR N. 13.50.2

Applying priming coat With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/ steel works. DSR N. 13.50.3+13.50.4

Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete. 40 mm thick with 20 mm nominal size stone aggregate. DSR N. 11.3.1

Providing and fixing M.S. fan clamp type I or II of 16 mm dia M.S. bar, bent to shape with hooked ends in R.C.C. slabs or beams during laying, including painting the exposed portion of loop, all as per standard design complete. DSR N. 10.17

Providing and fixing water closet squatting pan (Indian type W.C.pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests . DSR N. 17.1.1

Providing and fixing water closet squatting pan (Indian type W.C.pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required Stainless Steel AISI-304(18/8) Orissa pattern W.C. pan of size 585x480 mm with flush pipe and integrated type foot rests. DSR N. 17.2.2

Providing and fixing white vitreous china flat back half stall urinal of size 580x380x350 mm with white PVC automatic flushing cistern, with fittings, standard size C.P. brass flush pipe, spreaders with unions and clamps (all in C.P. brass) with waste fitting as per IS : 2556, C.I. trap with outlet grating and other couplings in C.P. brass, including painting of fittings and cutting and making good the walls and floors wherever required Single half stall urinal with 5 litre P.V.C. automatic flushing cistern. DSR N. 17.5.1

Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps. DSR N. 17.7.1

Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required 610x460 mm bowl depth 200 mm. DSR N. 17.10.2.2

Providing and laying Ceramic glazed floor tiles of size 300x300 mm(thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement :4 Coarse sand), jointing with grey cement slurry @ 3.3kg/sqm including pointing the joints with white cement and matching pigment etc.,., complete. DSR N. 11.37

Providing and fixing 1st quality ceramic glazed floor tiles conforming to IS : 15622 (thickness to be specified by the manufacturer ) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3kgper sqm including pointing the joints with white cement mixed with pigment of matching shade complete. DSR N. 11.37A

Providing and fixing brass stop cock of approved quality .15 mm nominal bore. DSR N. 18.16.1

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. : Internal work - Exposed on wall .DSR N. 18.7 15 mm nominal outer dia Pipes

20 mm nominal outer dia Pipes

Wiring point for light point/fan point/exhauxst fan point/call bell point with 1.5 sqmm FRLS PVC insulated copper conductor single core cable in surface /recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5sq.mm FRLS PVC insulated copper conductor single core cable etc.as require DSR N.1.10.1 Use 0.789*106/110)

Wiring point for plug with 1.5 sq. mm FRLSH PVC insulated multistrand single core copper conductor cable in PVC conduit pipe partly concealed In wall, and partly laid in slab along with the reinforcement before concreting complet with 1.5 Sq. mm FRLSH PVC inslulated multistand coper conductor cable as earth wire drawn inside conduit, piano type switch and socket etc., complete in all respect, including matching color wash. SI No.-141 (C)

Supply and fixing suitable size GI box with modulr plate and cover in front on surface i/c providing and fixing 6 pin 15/16 A modular socket and switch DSR22 N.1.32

S/F 5A TO 32A ,240/415V,10KA "C" curve ,miniature circuit braker suitable for inductive load ..DSR 22 N. 2.10.1

Wiring for circuit/submain wiring along with earth wire with FRLS PVC insulated copper conductor, single core cable of medium class 2x2.5sq.mm+1x2.5sq.mm earth wire DSR22 N. 1.14.2

S&F surface/flush mounting 12 ways SPN distribution board without additional metal door without MCB complete in all respect as directed at site by Engineer in charge. SI No.-1025A, CAT B

S/F sign boad marbal stone patiya etc all complete.